| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1423228723-10919-7-git-send-email-sathya.perla@emulex.com>
Date: Fri, 6 Feb 2015 08:18:40 -0500
From: Sathya Perla <sathya.perla@...lex.com>
To: <netdev@...r.kernel.org>
Subject: [PATCH net-next 6/9] be2net: remove duplicate code in be_cmd_rx_filter()
This patch passes BE_IF_FLAGS_XXX flags to be_cmd_rx_filter() routine
instead of the IFF_XXX flags. Doing this gets rid of the code to convert
the IFF_XXX flags to the BE_IF_FLAGS_XXX used by the FW cmd. The patch
also removes code for setting if_flags_mask that was duplicated for each
filter mode.
Signed-off-by: Sathya Perla <sathya.perla@...lex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@...lex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 54 ++++++++++-------------------
drivers/net/ethernet/emulex/benet/be_cmds.h | 4 +++
drivers/net/ethernet/emulex/benet/be_main.c | 29 +++++++---------
3 files changed, 36 insertions(+), 51 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 2f59553..1c85bbf 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1886,7 +1886,7 @@ err:
return status;
}
-int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
+static int __be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
{
struct be_mcc_wrb *wrb;
struct be_dma_mem *mem = &adapter->rx_filter;
@@ -1906,31 +1906,13 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
wrb, mem);
req->if_id = cpu_to_le32(adapter->if_handle);
- if (flags & IFF_PROMISC) {
- req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS |
- BE_IF_FLAGS_VLAN_PROMISCUOUS |
- BE_IF_FLAGS_MCAST_PROMISCUOUS);
- if (value == ON)
- req->if_flags =
- cpu_to_le32(BE_IF_FLAGS_PROMISCUOUS |
- BE_IF_FLAGS_VLAN_PROMISCUOUS |
- BE_IF_FLAGS_MCAST_PROMISCUOUS);
- } else if (flags & IFF_ALLMULTI) {
- req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
- req->if_flags = cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
- } else if (flags & BE_FLAGS_VLAN_PROMISC) {
- req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS);
-
- if (value == ON)
- req->if_flags =
- cpu_to_le32(BE_IF_FLAGS_VLAN_PROMISCUOUS);
- } else {
+ req->if_flags_mask = cpu_to_le32(flags);
+ req->if_flags = (value == ON) ? req->if_flags_mask : 0;
+
+ if (flags & BE_IF_FLAGS_MULTICAST) {
struct netdev_hw_addr *ha;
int i = 0;
- req->if_flags_mask = cpu_to_le32(BE_IF_FLAGS_MULTICAST);
- req->if_flags = cpu_to_le32(BE_IF_FLAGS_MULTICAST);
-
/* Reset mcast promisc mode if already set by setting mask
* and not setting flags field
*/
@@ -1942,24 +1924,26 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN);
}
- if ((req->if_flags_mask & cpu_to_le32(be_if_cap_flags(adapter))) !=
- req->if_flags_mask) {
- dev_warn(&adapter->pdev->dev,
- "Cannot set rx filter flags 0x%x\n",
- req->if_flags_mask);
- dev_warn(&adapter->pdev->dev,
- "Interface is capable of 0x%x flags only\n",
- be_if_cap_flags(adapter));
- }
- req->if_flags_mask &= cpu_to_le32(be_if_cap_flags(adapter));
-
status = be_mcc_notify_wait(adapter);
-
err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
+int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
+{
+ struct device *dev = &adapter->pdev->dev;
+
+ if ((flags & be_if_cap_flags(adapter)) != flags) {
+ dev_warn(dev, "Cannot set rx filter flags 0x%x\n", flags);
+ dev_warn(dev, "Interface is capable of 0x%x flags only\n",
+ be_if_cap_flags(adapter));
+ }
+ flags &= be_if_cap_flags(adapter);
+
+ return __be_cmd_rx_filter(adapter, flags, value);
+}
+
/* Uses synchrounous mcc */
int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
{
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 402d64f..cf9d870 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -586,6 +586,10 @@ enum be_if_flags {
BE_IF_FLAGS_PASS_L3L4_ERRORS | BE_IF_FLAGS_MULTICAST |\
BE_IF_FLAGS_UNTAGGED)
+#define BE_IF_FLAGS_ALL_PROMISCUOUS (BE_IF_FLAGS_PROMISCUOUS | \
+ BE_IF_FLAGS_VLAN_PROMISCUOUS |\
+ BE_IF_FLAGS_MCAST_PROMISCUOUS)
+
/* An RX interface is an object with one or more MAC addresses and
* filtering capabilities. */
struct be_cmd_req_if_create {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 2ec1d80..4f7a14b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1133,16 +1133,12 @@ static int be_vid_config(struct be_adapter *adapter)
MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES)
goto set_vlan_promisc;
dev_err(dev, "Setting HW VLAN filtering failed\n");
- } else {
- if (adapter->flags & BE_FLAGS_VLAN_PROMISC) {
- /* hw VLAN filtering re-enabled. */
- status = be_cmd_rx_filter(adapter,
- BE_FLAGS_VLAN_PROMISC, OFF);
- if (!status) {
- dev_info(dev,
- "Disabling VLAN Promiscuous mode\n");
- adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
- }
+ } else if (adapter->flags & BE_FLAGS_VLAN_PROMISC) {
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS,
+ OFF);
+ if (!status) {
+ dev_info(dev, "Disabling VLAN Promiscuous mode\n");
+ adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
}
}
@@ -1152,7 +1148,7 @@ set_vlan_promisc:
if (adapter->flags & BE_FLAGS_VLAN_PROMISC)
return 0;
- status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON);
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_VLAN_PROMISCUOUS, ON);
if (!status) {
dev_info(dev, "Enable VLAN Promiscuous mode\n");
adapter->flags |= BE_FLAGS_VLAN_PROMISC;
@@ -1204,7 +1200,7 @@ static void be_clear_promisc(struct be_adapter *adapter)
adapter->promiscuous = false;
adapter->flags &= ~(BE_FLAGS_VLAN_PROMISC | BE_FLAGS_MCAST_PROMISC);
- be_cmd_rx_filter(adapter, IFF_PROMISC, OFF);
+ be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, OFF);
}
static void be_set_rx_mode(struct net_device *netdev)
@@ -1213,7 +1209,7 @@ static void be_set_rx_mode(struct net_device *netdev)
int status;
if (netdev->flags & IFF_PROMISC) {
- be_cmd_rx_filter(adapter, IFF_PROMISC, ON);
+ be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS, ON);
adapter->promiscuous = true;
goto done;
}
@@ -1240,7 +1236,8 @@ static void be_set_rx_mode(struct net_device *netdev)
}
if (netdev_uc_count(netdev) > be_max_uc(adapter)) {
- be_cmd_rx_filter(adapter, IFF_PROMISC, ON);
+ be_cmd_rx_filter(adapter, BE_IF_FLAGS_ALL_PROMISCUOUS,
+ ON);
adapter->promiscuous = true;
goto done;
}
@@ -1253,7 +1250,7 @@ static void be_set_rx_mode(struct net_device *netdev)
}
}
- status = be_cmd_rx_filter(adapter, IFF_MULTICAST, ON);
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MULTICAST, ON);
if (!status) {
if (adapter->flags & BE_FLAGS_MCAST_PROMISC)
adapter->flags &= ~BE_FLAGS_MCAST_PROMISC;
@@ -1267,7 +1264,7 @@ set_mcast_promisc:
/* Set to MCAST promisc mode if setting MULTICAST address fails
* or if num configured exceeds what we support
*/
- status = be_cmd_rx_filter(adapter, IFF_ALLMULTI, ON);
+ status = be_cmd_rx_filter(adapter, BE_IF_FLAGS_MCAST_PROMISCUOUS, ON);
if (!status)
adapter->flags |= BE_FLAGS_MCAST_PROMISC;
done:
--
2.2.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists