| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <54D4728B.90300@pengutronix.de>
Date: Fri, 06 Feb 2015 08:51:39 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Aaron Wu <Aaron.wu@...log.com>, wg@...ndegger.com,
linux-can@...r.kernel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-devel@...log.com
Subject: Re: [PATCH V6 3/3] bfin_can: move and merge the content of header
file into driver body
On 02/06/2015 07:25 AM, Aaron Wu wrote:
> Header file was in arch dependent location arch/blackfin/include/asm/bfin_can.h,
> Now move and merge the useful contents of header file into driver code, note
> the original header file is reserved for full register sets access test by other
> code so it survives.
^^^
Trailing whitespace :)
>
> Signed-off-by: Aaron Wu <Aaron.wu@...log.com>
> ---
> drivers/net/can/bfin_can.c | 114 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 113 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
> index 259d09a..63fab5c 100644
> --- a/drivers/net/can/bfin_can.c
> +++ b/drivers/net/can/bfin_can.c
> @@ -20,13 +20,125 @@
> #include <linux/can/dev.h>
> #include <linux/can/error.h>
>
> -#include <asm/bfin_can.h>
> #include <asm/portmux.h>
>
> #define DRV_NAME "bfin_can"
> #define BFIN_CAN_TIMEOUT 100
> #define TX_ECHO_SKB_MAX 1
>
> +/* transmit and receive channels */
> +
> +#define TRANSMIT_CHL 24
> +#define RECEIVE_STD_CHL 0
> +#define RECEIVE_EXT_CHL 4
> +#define RECEIVE_RTR_CHL 8
> +#define RECEIVE_EXT_RTR_CHL 12
> +#define MAX_CHL_NUMBER 32
^^^^
Please fix the indention, use one space only.
> +
> +/* All Blackfin system MMRs are padded to 32bits even if the register
> + * itself is only 16bits. So use a helper macro to streamline this
> +*/
> +#define __BFP(m) u16 m; u16 __pad_##m
> +
> + /* bfin can registers layout
> + */
> +struct bfin_can_mask_regs {
> + __BFP(aml);
> + __BFP(amh);
> +};
> +
> +struct bfin_can_channel_regs {
> + /* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */
> + u16 data[8];
> + __BFP(dlc);
^ please remove that space
> + __BFP(tsv);
> + __BFP(id0);
> + __BFP(id1);
> +};
> +
> +struct bfin_can_regs {
> + /* global control and status registers
> + */
> + __BFP(mc1); /* offset 0x00 */
^^^^^^^^^^^
please use tab(s) instead of spaces here.
> + __BFP(md1); /* offset 0x04 */
> + __BFP(trs1); /* offset 0x08 */
> + __BFP(trr1); /* offset 0x0c */
> + __BFP(ta1); /* offset 0x10 */
> + __BFP(aa1); /* offset 0x14 */
> + __BFP(rmp1); /* offset 0x18 */
> + __BFP(rml1); /* offset 0x1c */
> + __BFP(mbtif1); /* offset 0x20 */
> + __BFP(mbrif1); /* offset 0x24 */
> + __BFP(mbim1); /* offset 0x28 */
> + __BFP(rfh1); /* offset 0x2c */
> + __BFP(opss1); /* offset 0x30 */
> + u32 __pad1[3];
> + __BFP(mc2); /* offset 0x40 */
^
please remove that space.
> + __BFP(md2); /* offset 0x44 */
> + __BFP(trs2); /* offset 0x48 */
> + __BFP(trr2); /* offset 0x4c */
> + __BFP(ta2); /* offset 0x50 */
> + __BFP(aa2); /* offset 0x54 */
> + __BFP(rmp2); /* offset 0x58 */
> + __BFP(rml2); /* offset 0x5c */
> + __BFP(mbtif2); /* offset 0x60 */
> + __BFP(mbrif2); /* offset 0x64 */
> + __BFP(mbim2); /* offset 0x68 */
> + __BFP(rfh2); /* offset 0x6c */
> + __BFP(opss2); /* offset 0x70 */
> + u32 __pad2[3];
> + __BFP(clock); /* offset 0x80 */
^
same here
> + __BFP(timing); /* offset 0x84 */
> + __BFP(debug); /* offset 0x88 */
> + __BFP(status); /* offset 0x8c */
> + __BFP(cec); /* offset 0x90 */
> + __BFP(gis); /* offset 0x94 */
> + __BFP(gim); /* offset 0x98 */
> + __BFP(gif); /* offset 0x9c */
> + __BFP(control); /* offset 0xa0 */
> + __BFP(intr); /* offset 0xa4 */
> + __BFP(version); /* offset 0xa8 */
> + __BFP(mbtd); /* offset 0xac */
> + __BFP(ewr); /* offset 0xb0 */
> + __BFP(esr); /* offset 0xb4 */
> + u32 __pad3[2];
> + __BFP(ucreg); /* offset 0xc0 */
^
same here
> + __BFP(uccnt); /* offset 0xc4 */
> + __BFP(ucrc); /* offset 0xc8 */
> + __BFP(uccnf); /* offset 0xcc */
> + u32 __pad4[1];
> + __BFP(version2); /* offset 0xd4 */
^
same here
> + u32 __pad5[10];
> +
> + /* channel(mailbox) mask and message registers
> + */
/* single line comment should look like this */
> + struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */
> + struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
> +};
> +
> +#undef __BFP
> +
> +#define SRS 0x0001 /* Software Reset */
^^^^^^^^^^^^^^^ ^^
single space here probably one tab here
> +#define SER 0x0008 /* Stuff Error */
> +#define BOIM 0x0008 /* Enable Bus Off Interrupt */
> +#define CCR 0x0080 /* CAN Configuration Mode Request */
> +#define CCA 0x0080 /* Configuration Mode Acknowledge */
> +#define SAM 0x0080 /* Sampling */
> +#define AME 0x8000 /* Acceptance Mask Enable */
> +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
> +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
> +#define RTR 0x4000 /* Remote Frame Transmission Request */
> +#define BOIS 0x0008 /* Bus Off IRQ Status */
> +#define IDE 0x2000 /* Identifier Extension */
> +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
> +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
> +#define EWTIS 0x0001 /* TX Error Count IRQ Status */
> +#define EWRIS 0x0002 /* RX Error Count IRQ Status */
> +#define BEF 0x0040 /* Bit Error Flag */
> +#define FER 0x0080 /* Form Error Flag */
> +#define SMR 0x0020 /* Sleep Mode Request */
> +#define SMACK 0x0008 /* Sleep Mode Acknowledge */
> +
> /*
> * bfin can private data
> */
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists