netdev - Re: [RFT PATCH 1/2] net: dsa: mv88e6xxx: Add EEE support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20150223.171947.1925831716804927748.davem@davemloft.net>
Date:	Mon, 23 Feb 2015 17:19:47 -0500 (EST)
From:	David Miller <davem@...emloft.net>
To:	linux@...ck-us.net
Cc:	netdev@...r.kernel.org, andrew@...n.ch, f.fainelli@...il.com,
	linux-kernel@...r.kernel.org
Subject: Re: [RFT PATCH 1/2] net: dsa: mv88e6xxx: Add EEE support

From: Guenter Roeck <linux@...ck-us.net>
Date: Mon, 23 Feb 2015 08:26:09 -0800

> +	/* Don't call phy_init_eee for now. It fails if the link is down,
> +	 * but that should not really be a reason to fail configuration.
> +	 */

I think there is some confusion about phy_init_eee().

You invoke it after a link has been established.  Because programming
the MDIO registers that turn on EEE can only be done if the link
is configured in a certain way.

If you look at stmmac, it invokes phy_init_eee() via it's adjust_link
callback passed to phy_connect().  This is basically how I would
expect it to be used, in that any time a link parameter changes we
rerun phy_init_eee() to check the link partner registers, duplex
state, etc.

SXGBE on the other hand seems to not be using phy_init_eee() properly,
it only invokes it once per device open and that makes no sense at all
because then you're stuck with the eee state resulting from the link
state at open time.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html