lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <1424683216-29611-6-git-send-email-sathya.perla@emulex.com> Date: Mon, 23 Feb 2015 04:20:12 -0500 From: Sathya Perla <sathya.perla@...lex.com> To: <netdev@...r.kernel.org> Subject: [net-next PATCH 5/9] be2net: refactor error detect/recovery function From: Kalesh AP <kalesh.purayil@...lex.com> Currently when an error is detected, the queue resources are being cleaned up in the recovery routine. The resources are better cleaned up in the error detection routine itself (similar to EEH code.) So, this patch re-factors error processing logic to follow the following sequence: - check if there is an error in adapter - if error, - cleanup resources - attempt recovery The patch renames lancer_recover_func() to be_err_recover() as this routine will be used in the future for error recovery on Skyhawk too. Signed-off-by: Kalesh AP <kalesh.purayil@...lex.com> Signed-off-by: Sathya Perla <sathya.perla@...lex.com> --- drivers/net/ethernet/emulex/benet/be_main.c | 31 ++++++++++++++++------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 74ba995..034ce70 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2844,12 +2844,12 @@ void be_detect_error(struct be_adapter *adapter) sliport_err2 = ioread32(adapter->db + SLIPORT_ERROR2_OFFSET); adapter->hw_error = true; + error_detected = true; /* Do not log error messages if its a FW reset */ if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 && sliport_err2 == SLIPORT_ERROR_FW_RESET2) { dev_info(dev, "Firmware update in progress\n"); } else { - error_detected = true; dev_err(dev, "Error detected in the card\n"); dev_err(dev, "ERR: sliport status 0x%x\n", sliport_status); @@ -4903,8 +4903,9 @@ static void be_netdev_init(struct net_device *netdev) netdev->ethtool_ops = &be_ethtool_ops; } -static int lancer_recover_func(struct be_adapter *adapter) +static int be_err_recover(struct be_adapter *adapter) { + struct net_device *netdev = adapter->netdev; struct device *dev = &adapter->pdev->dev; int status; @@ -4912,23 +4913,20 @@ static int lancer_recover_func(struct be_adapter *adapter) if (status) goto err; - if (netif_running(adapter->netdev)) - be_close(adapter->netdev); - - be_clear(adapter); - be_clear_all_error(adapter); status = be_setup(adapter); if (status) goto err; - if (netif_running(adapter->netdev)) { - status = be_open(adapter->netdev); + if (netif_running(netdev)) { + status = be_open(netdev); if (status) goto err; } + netif_device_attach(netdev); + dev_err(dev, "Adapter recovery successful\n"); return 0; err: @@ -4945,18 +4943,23 @@ static void be_err_detection_task(struct work_struct *work) struct be_adapter *adapter = container_of(work, struct be_adapter, be_err_detection_work.work); + struct net_device *netdev = adapter->netdev; int status = 0; be_detect_error(adapter); - if (adapter->hw_error && lancer_chip(adapter)) { + if (adapter->hw_error) { rtnl_lock(); - netif_device_detach(adapter->netdev); + netif_device_detach(netdev); + if (netif_running(netdev)) + be_close(netdev); rtnl_unlock(); - status = lancer_recover_func(adapter); - if (!status) - netif_device_attach(adapter->netdev); + be_clear(adapter); + + /* As of now error recovery support is in Lancer only */ + if (lancer_chip(adapter)) + status = be_err_recover(adapter); } /* In Lancer, for all errors other than provisioning error (-EAGAIN), -- 2.2.0 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists