lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <1425122989-354-11-git-send-email-jeffrey.t.kirsher@intel.com> Date: Sat, 28 Feb 2015 03:29:41 -0800 From: Jeff Kirsher <jeffrey.t.kirsher@...el.com> To: davem@...emloft.net Cc: Anjali Singhai Jain <anjali.singhai@...el.com>, netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com> Subject: [net-next 10/18] i40e: Add FW check to disable DCB and wrap autoneg workaround with FW check From: Anjali Singhai Jain <anjali.singhai@...el.com> For FW < 4.33 DCB should be disabled. Also Autoneg workaround to avoid Rx stall is still needed for FW < 4.33. Change-ID: Iff36ad86be2f597e7701096014d6d094332a9a21 Signed-off-by: Anjali Singhai Jain <anjali.singhai@...el.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com> --- drivers/net/ethernet/intel/i40e/i40e_main.c | 31 ++++++++++++++++++----------- 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 7509048..3a476956 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -4577,6 +4577,11 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf) struct i40e_hw *hw = &pf->hw; int err = 0; + /* Do not enable DCB for SW1 and SW2 images even if the FW is capable */ + if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) || + (pf->hw.aq.fw_maj_ver < 4)) + goto out; + /* Get the initial DCB configuration */ err = i40e_init_dcb(hw); if (!err) { @@ -6337,13 +6342,14 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit) } } - msleep(75); - ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL); - if (ret) { - dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n", - pf->hw.aq.asq_last_status); + if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) || + (pf->hw.aq.fw_maj_ver < 4)) { + msleep(75); + ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL); + if (ret) + dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n", + pf->hw.aq.asq_last_status); } - /* reinit the misc interrupt */ if (pf->flags & I40E_FLAG_MSIX_ENABLED) ret = i40e_setup_misc_vector(pf); @@ -9703,13 +9709,14 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) dev_info(&pf->pdev->dev, "set phy mask fail, aq_err %d\n", err); - msleep(75); - err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL); - if (err) { - dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n", - pf->hw.aq.asq_last_status); + if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) || + (pf->hw.aq.fw_maj_ver < 4)) { + msleep(75); + err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL); + if (err) + dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n", + pf->hw.aq.asq_last_status); } - /* The main driver is (mostly) up and happy. We need to set this state * before setting up the misc vector or we get a race and the vector * ends up disabled forever. -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists