| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1425447874-5406-4-git-send-email-sathya.perla@emulex.com>
Date: Wed, 4 Mar 2015 00:44:34 -0500
From: Sathya Perla <sathya.perla@...lex.com>
To: <netdev@...r.kernel.org>
Subject: [PATCH net-next 3/3] be2net: implement .sriov_configure() PCI callback
From: Vasundhara Volam <vasundhara.volam@...lex.com>
This patch implements the .sriov_configure() PCI method to allow for
runtime enabling/disabling of VFs. The module param "num_vfs" is now
deprecated.
At the time of driver load the PF-pool resources are allocated to the PF.
When the user enables VFs, the resources are then re-distributed across
PFs and VFs based on the number of VFs enabled.
Signed-off-by: Vasundhara Volam <vasundhara.volam@...lex.com>
Signed-off-by: Sathya Perla <sathya.perla@...lex.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 3 -
drivers/net/ethernet/emulex/benet/be_main.c | 169 ++++++++++++++++++----------
2 files changed, 107 insertions(+), 65 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 4a97cbf..defe68c 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3879,9 +3879,6 @@ int be_cmd_set_sriov_config(struct be_adapter *adapter,
struct be_nic_res_desc nic_vft;
} __packed desc;
- if (BEx_chip(adapter) || lancer_chip(adapter))
- return 0;
-
/* PF PCIE descriptor */
be_reset_pcie_desc(&desc.pcie);
desc.pcie.hdr.desc_type = PCIE_RESOURCE_DESC_TYPE_V1;
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 5f1e018..788c38a 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -30,6 +30,9 @@ MODULE_DESCRIPTION(DRV_DESC " " DRV_VER);
MODULE_AUTHOR("Emulex Corporation");
MODULE_LICENSE("GPL");
+/* num_vfs module param is obsolete.
+ * Use sysfs method to enable/disable VFs.
+ */
static unsigned int num_vfs;
module_param(num_vfs, uint, S_IRUGO);
MODULE_PARM_DESC(num_vfs, "Number of PCI VFs to initialize");
@@ -3449,7 +3452,8 @@ static int be_clear(struct be_adapter *adapter)
/* Re-configure FW to distribute resources evenly across max-supported
* number of VFs, only when VFs are not already enabled.
*/
- if (be_physfn(adapter) && !pci_vfs_assigned(pdev)) {
+ if (skyhawk_chip(adapter) && be_physfn(adapter) &&
+ !pci_vfs_assigned(pdev)) {
num_vf_qs = be_calculate_vf_qs(adapter,
pci_sriov_get_totalvfs(pdev));
be_cmd_set_sriov_config(adapter, adapter->pool_res,
@@ -3712,13 +3716,12 @@ static void be_setup_init(struct be_adapter *adapter)
static int be_get_sriov_config(struct be_adapter *adapter)
{
- struct device *dev = &adapter->pdev->dev;
struct be_resources res = {0};
int max_vfs, old_vfs;
- /* Some old versions of BE3 FW don't report max_vfs value */
be_cmd_get_profile_config(adapter, &res, RESOURCE_LIMITS, 0);
+ /* Some old versions of BE3 FW don't report max_vfs value */
if (BE3_chip(adapter) && !res.max_vfs) {
max_vfs = pci_sriov_get_totalvfs(adapter->pdev);
res.max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0;
@@ -3726,35 +3729,49 @@ static int be_get_sriov_config(struct be_adapter *adapter)
adapter->pool_res = res;
- if (!be_max_vfs(adapter)) {
- if (num_vfs)
- dev_warn(dev, "SRIOV is disabled. Ignoring num_vfs\n");
- adapter->num_vfs = 0;
- return 0;
- }
-
- pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
-
- /* validate num_vfs module param */
+ /* If during previous unload of the driver, the VFs were not disabled,
+ * then we cannot rely on the PF POOL limits for the TotalVFs value.
+ * Instead use the TotalVFs value stored in the pci-dev struct.
+ */
old_vfs = pci_num_vf(adapter->pdev);
if (old_vfs) {
- dev_info(dev, "%d VFs are already enabled\n", old_vfs);
- if (old_vfs != num_vfs)
- dev_warn(dev, "Ignoring num_vfs=%d setting\n", num_vfs);
+ dev_info(&adapter->pdev->dev, "%d VFs are already enabled\n",
+ old_vfs);
+
+ adapter->pool_res.max_vfs =
+ pci_sriov_get_totalvfs(adapter->pdev);
adapter->num_vfs = old_vfs;
- } else {
- if (num_vfs > be_max_vfs(adapter)) {
- dev_info(dev, "Resources unavailable to init %d VFs\n",
- num_vfs);
- dev_info(dev, "Limiting to %d VFs\n",
- be_max_vfs(adapter));
- }
- adapter->num_vfs = min_t(u16, num_vfs, be_max_vfs(adapter));
}
return 0;
}
+static void be_alloc_sriov_res(struct be_adapter *adapter)
+{
+ int old_vfs = pci_num_vf(adapter->pdev);
+ u16 num_vf_qs;
+ int status;
+
+ be_get_sriov_config(adapter);
+
+ if (!old_vfs)
+ pci_sriov_set_totalvfs(adapter->pdev, be_max_vfs(adapter));
+
+ /* When the HW is in SRIOV capable configuration, the PF-pool
+ * resources are given to PF during driver load, if there are no
+ * old VFs. This facility is not available in BE3 FW.
+ * Also, this is done by FW in Lancer chip.
+ */
+ if (skyhawk_chip(adapter) && be_max_vfs(adapter) && !old_vfs) {
+ num_vf_qs = be_calculate_vf_qs(adapter, 0);
+ status = be_cmd_set_sriov_config(adapter, adapter->pool_res, 0,
+ num_vf_qs);
+ if (status)
+ dev_err(&adapter->pdev->dev,
+ "Failed to optimize SRIOV resources\n");
+ }
+}
+
static int be_get_resources(struct be_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
@@ -3800,40 +3817,12 @@ static int be_get_resources(struct be_adapter *adapter)
be_max_uc(adapter), be_max_mc(adapter),
be_max_vlans(adapter));
+ /* Sanitize cfg_num_qs based on HW and platform limits */
+ adapter->cfg_num_qs = min_t(u16, netif_get_num_default_rss_queues(),
+ be_max_qs(adapter));
return 0;
}
-static void be_sriov_config(struct be_adapter *adapter)
-{
- struct device *dev = &adapter->pdev->dev;
- u16 num_vf_qs;
- int status;
-
- status = be_get_sriov_config(adapter);
- if (status) {
- dev_err(dev, "Failed to query SR-IOV configuration\n");
- dev_err(dev, "SR-IOV cannot be enabled\n");
- return;
- }
-
- /* When the HW is in SRIOV capable configuration, the PF-pool
- * resources are equally distributed across the max-number of
- * VFs. The user may request only a subset of the max-vfs to be
- * enabled. Based on num_vfs, redistribute the resources across
- * num_vfs so that each VF will have access to more number of
- * resources. This facility is not available in BE3 FW.
- * Also, this is done by FW in Lancer chip.
- */
- if (be_max_vfs(adapter) && !pci_num_vf(adapter->pdev)) {
- num_vf_qs = be_calculate_vf_qs(adapter, adapter->num_vfs);
- status = be_cmd_set_sriov_config(adapter,
- adapter->pool_res,
- adapter->num_vfs, num_vf_qs);
- if (status)
- dev_err(dev, "Failed to optimize SR-IOV resources\n");
- }
-}
-
static int be_get_config(struct be_adapter *adapter)
{
int status, level;
@@ -3864,9 +3853,6 @@ static int be_get_config(struct be_adapter *adapter)
"Using profile 0x%x\n", profile_id);
}
- if (!BE2_chip(adapter) && be_physfn(adapter))
- be_sriov_config(adapter);
-
status = be_get_resources(adapter);
if (status)
return status;
@@ -3876,9 +3862,6 @@ static int be_get_config(struct be_adapter *adapter)
if (!adapter->pmac_id)
return -ENOMEM;
- /* Sanitize cfg_num_qs based on HW and platform limits */
- adapter->cfg_num_qs = min(adapter->cfg_num_qs, be_max_qs(adapter));
-
return 0;
}
@@ -4053,6 +4036,9 @@ static int be_setup(struct be_adapter *adapter)
if (!lancer_chip(adapter))
be_cmd_req_native_mode(adapter);
+ if (!BE2_chip(adapter) && be_physfn(adapter))
+ be_alloc_sriov_res(adapter);
+
status = be_get_config(adapter);
if (status)
goto err;
@@ -5274,7 +5260,6 @@ static int be_drv_init(struct be_adapter *adapter)
/* Must be a power of 2 or else MODULO will BUG_ON */
adapter->be_get_temp_freq = 64;
- adapter->cfg_num_qs = netif_get_num_default_rss_queues();
return 0;
@@ -5598,6 +5583,60 @@ err:
dev_err(&adapter->pdev->dev, "EEH resume failed\n");
}
+static int be_pci_sriov_configure(struct pci_dev *pdev, int num_vfs)
+{
+ struct be_adapter *adapter = pci_get_drvdata(pdev);
+ u16 num_vf_qs;
+ int status;
+
+ if (!num_vfs)
+ be_vf_clear(adapter);
+
+ adapter->num_vfs = num_vfs;
+
+ if (adapter->num_vfs == 0 && pci_vfs_assigned(pdev)) {
+ dev_warn(&pdev->dev,
+ "Cannot disable VFs while they are assigned\n");
+ return -EBUSY;
+ }
+
+ /* When the HW is in SRIOV capable configuration, the PF-pool resources
+ * are equally distributed across the max-number of VFs. The user may
+ * request only a subset of the max-vfs to be enabled.
+ * Based on num_vfs, redistribute the resources across num_vfs so that
+ * each VF will have access to more number of resources.
+ * This facility is not available in BE3 FW.
+ * Also, this is done by FW in Lancer chip.
+ */
+ if (skyhawk_chip(adapter) && !pci_num_vf(pdev)) {
+ num_vf_qs = be_calculate_vf_qs(adapter, adapter->num_vfs);
+ status = be_cmd_set_sriov_config(adapter, adapter->pool_res,
+ adapter->num_vfs, num_vf_qs);
+ if (status)
+ dev_err(&pdev->dev,
+ "Failed to optimize SR-IOV resources\n");
+ }
+
+ status = be_get_resources(adapter);
+ if (status)
+ return be_cmd_status(status);
+
+ /* Updating real_num_tx/rx_queues() requires rtnl_lock() */
+ rtnl_lock();
+ status = be_update_queues(adapter);
+ rtnl_unlock();
+ if (status)
+ return be_cmd_status(status);
+
+ if (adapter->num_vfs)
+ status = be_vf_setup(adapter);
+
+ if (!status)
+ return adapter->num_vfs;
+
+ return 0;
+}
+
static const struct pci_error_handlers be_eeh_handlers = {
.error_detected = be_eeh_err_detected,
.slot_reset = be_eeh_reset,
@@ -5612,6 +5651,7 @@ static struct pci_driver be_driver = {
.suspend = be_suspend,
.resume = be_pci_resume,
.shutdown = be_shutdown,
+ .sriov_configure = be_pci_sriov_configure,
.err_handler = &be_eeh_handlers
};
@@ -5625,6 +5665,11 @@ static int __init be_init_module(void)
rx_frag_size = 2048;
}
+ if (num_vfs > 0) {
+ pr_info(DRV_NAME " : Module param num_vfs is obsolete.");
+ pr_info(DRV_NAME " : Use sysfs method to enable VFs\n");
+ }
+
return pci_register_driver(&be_driver);
}
module_init(be_init_module);
--
2.2.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists