| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1427937719-11630-7-git-send-email-andrew@lunn.ch>
Date: Thu, 2 Apr 2015 03:21:53 +0200
From: Andrew Lunn <andrew@...n.ch>
To: davem@...emloft.net, linux@...ck-us.net
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>
Subject: [PATCH 06/12] net: dsa: Centralize Marvell switch reset
Marvell switches are all reset in nearly the same way. The only
difference is if the PPU should be enabled or not. Move this
code into the shared mv88x6xxx.c.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
Tested-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/net/dsa/mv88e6123_61_65.c | 36 +----------------------------
drivers/net/dsa/mv88e6131.c | 36 +----------------------------
drivers/net/dsa/mv88e6171.c | 48 +--------------------------------------
drivers/net/dsa/mv88e6352.c | 38 +------------------------------
drivers/net/dsa/mv88e6xxx.c | 40 ++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx.h | 1 +
6 files changed, 45 insertions(+), 154 deletions(-)
diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index 6480f77829ef..10228ad48151 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -52,40 +52,6 @@ static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
return NULL;
}
-static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int i;
- int ret;
- unsigned long timeout;
-
- /* Set all ports to the disabled state. */
- for (i = 0; i < ps->num_ports; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
-
- /* Reset the switch. */
- REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
-
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0xc800) == 0xc800)
- break;
-
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
- return 0;
-}
-
static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
{
int ret;
@@ -292,7 +258,7 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
return -ENODEV;
}
- ret = mv88e6123_61_65_switch_reset(ds);
+ ret = mv88e6xxx_switch_reset(ds, false);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 6b818fde2216..534a8f0b1c28 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -42,40 +42,6 @@ static char *mv88e6131_probe(struct device *host_dev, int sw_addr)
return NULL;
}
-static int mv88e6131_switch_reset(struct dsa_switch *ds)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int i;
- int ret;
- unsigned long timeout;
-
- /* Set all ports to the disabled state. */
- for (i = 0; i < ps->num_ports; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
-
- /* Reset the switch. */
- REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
-
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0xc800) == 0xc800)
- break;
-
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
- return 0;
-}
-
static int mv88e6131_setup_global(struct dsa_switch *ds)
{
int ret;
@@ -281,7 +247,7 @@ static int mv88e6131_setup(struct dsa_switch *ds)
return -ENODEV;
}
- ret = mv88e6131_switch_reset(ds);
+ ret = mv88e6xxx_switch_reset(ds, false);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 5a295533ff20..69b35d124de5 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -36,52 +36,6 @@ static char *mv88e6171_probe(struct device *host_dev, int sw_addr)
return NULL;
}
-static int mv88e6171_switch_reset(struct dsa_switch *ds)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int i;
- int ret;
- unsigned long timeout;
-
- /* Set all ports to the disabled state. */
- for (i = 0; i < ps->num_ports; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
-
- /* Reset the switch. Keep PPU active. The PPU needs to be
- * active to support indirect phy register accesses through
- * global registers 0x18 and 0x19.
- */
- REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
-
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0xc800) == 0xc800)
- break;
-
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
- /* Enable ports not under DSA, e.g. WAN port */
- for (i = 0; i < ps->num_ports; i++) {
- if (dsa_is_cpu_port(ds, i) || ds->phys_port_mask & (1 << i))
- continue;
-
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret | 0x03);
- }
-
- return 0;
-}
-
static int mv88e6171_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -282,7 +236,7 @@ static int mv88e6171_setup(struct dsa_switch *ds)
ps->num_ports = 7;
- ret = mv88e6171_switch_reset(ds);
+ ret = mv88e6xxx_switch_reset(ds, true);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 040027fcd013..214bdbc8a5b1 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -45,42 +45,6 @@ static char *mv88e6352_probe(struct device *host_dev, int sw_addr)
return NULL;
}
-static int mv88e6352_switch_reset(struct dsa_switch *ds)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- unsigned long timeout;
- int ret;
- int i;
-
- /* Set all ports to the disabled state. */
- for (i = 0; i < ps->num_ports; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
-
- /* Reset the switch. Keep PPU active (bit 14, undocumented).
- * The PPU needs to be active to support indirect phy register
- * accesses through global registers 0x18 and 0x19.
- */
- REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
-
- /* Wait up to one second for reset to complete. */
- timeout = jiffies + 1 * HZ;
- while (time_before(jiffies, timeout)) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0x8800) == 0x8800)
- break;
- usleep_range(1000, 2000);
- }
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
-
- return 0;
-}
-
static int mv88e6352_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
@@ -373,7 +337,7 @@ static int mv88e6352_setup(struct dsa_switch *ds)
mutex_init(&ps->eeprom_mutex);
- ret = mv88e6352_switch_reset(ds);
+ ret = mv88e6xxx_switch_reset(ds, true);
if (ret < 0)
return ret;
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 13572cc24c6d..9db5b40d78ea 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1161,6 +1161,46 @@ int mv88e6xxx_setup_common(struct dsa_switch *ds)
return 0;
}
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ u16 is_reset = (ppu_active ? 0x8800 : 0xc800);
+ unsigned long timeout;
+ int ret;
+ int i;
+
+ /* Set all ports to the disabled state. */
+ for (i = 0; i < ps->num_ports; i++) {
+ ret = REG_READ(REG_PORT(i), 0x04);
+ REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
+ }
+
+ /* Wait for transmit queues to drain. */
+ usleep_range(2000, 4000);
+
+ /* Reset the switch. Keep the PPU active if requested. The PPU
+ * needs to be active to support indirect phy register access
+ * through global registers 0x18 and 0x19.
+ */
+ if (ppu_active)
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc000);
+ else
+ REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
+
+ /* Wait up to one second for reset to complete. */
+ timeout = jiffies + 1 * HZ;
+ while (time_before(jiffies, timeout)) {
+ ret = REG_READ(REG_GLOBAL, 0x00);
+ if ((ret & is_reset) == is_reset)
+ break;
+ usleep_range(1000, 2000);
+ }
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
static int __init mv88e6xxx_init(void)
{
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index ef058444bdb7..f84d3d5178b9 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -129,6 +129,7 @@ struct mv88e6xxx_hw_stat {
int reg;
};
+int mv88e6xxx_switch_reset(struct dsa_switch *ds, bool ppu_active);
int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
int mv88e6xxx_setup_common(struct dsa_switch *ds);
int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists