[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5523FBF1.80304@talpey.com>
Date: Tue, 07 Apr 2015 11:46:57 -0400
From: Tom Talpey <tom@...pey.com>
To: Michael Wang <yun.wang@...fitbricks.com>,
Roland Dreier <roland@...nel.org>,
Sean Hefty <sean.hefty@...el.com>, linux-rdma@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-nfs@...r.kernel.org,
netdev@...r.kernel.org
CC: Hal Rosenstock <hal.rosenstock@...il.com>,
Tom Tucker <tom@...ngridcomputing.com>,
Steve Wise <swise@...ngridcomputing.com>,
Hoang-Nam Nguyen <hnguyen@...ibm.com>,
Christoph Raisch <raisch@...ibm.com>,
Mike Marciniszyn <infinipath@...el.com>,
Eli Cohen <eli@...lanox.com>,
Faisal Latif <faisal.latif@...el.com>,
Upinder Malhi <umalhi@...co.com>,
Trond Myklebust <trond.myklebust@...marydata.com>,
"J. Bruce Fields" <bfields@...ldses.org>,
"David S. Miller" <davem@...emloft.net>,
Ira Weiny <ira.weiny@...el.com>,
PJ Waskiewicz <pj.waskiewicz@...idfire.com>,
Tatyana Nikolova <Tatyana.E.Nikolova@...el.com>,
Or Gerlitz <ogerlitz@...lanox.com>,
Jack Morgenstein <jackm@....mellanox.co.il>,
Haggai Eran <haggaie@...lanox.com>,
Ilya Nelkenbaum <ilyan@...lanox.com>,
Yann Droneaud <ydroneaud@...eya.com>,
Bart Van Assche <bvanassche@....org>,
Shachar Raindel <raindel@...lanox.com>,
Sagi Grimberg <sagig@...lanox.com>,
Devesh Sharma <devesh.sharma@...lex.com>,
Matan Barak <matanb@...lanox.com>,
Moni Shoua <monis@...lanox.com>, Jiri Kosina <jkosina@...e.cz>,
Selvin Xavier <selvin.xavier@...lex.com>,
Mitesh Ahuja <mitesh.ahuja@...lex.com>,
Li RongQing <roy.qing.li@...il.com>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Alex Estrin <alex.estrin@...el.com>,
Doug Ledford <dledford@...hat.com>,
Eric Dumazet <edumazet@...gle.com>,
Erez Shitrit <erezsh@...lanox.com>,
Tom Gundersen <teg@...m.no>,
Chuck Lever <chuck.lever@...cle.com>
Subject: Re: [PATCH v2 09/17] IB/Verbs: Use helper cap_read_multi_sge() and
reform svc_rdma_accept()
On 4/7/2015 8:34 AM, Michael Wang wrote:
> /**
> + * cap_read_multi_sge - Check if the port of device has the capability
> + * RDMA Read Multiple Scatter-Gather Entries.
> + *
> + * @device: Device to be checked
> + * @port_num: Port number of the device
> + *
> + * Return 0 when port of the device don't support
> + * RDMA Read Multiple Scatter-Gather Entries.
> + */
> +static inline int cap_read_multi_sge(struct ib_device *device, u8 port_num)
> +{
> + return !rdma_transport_iwarp(device, port_num);
> +}
This just papers over the issue we discussed earlier. How *many*
entries does the device support? If a device supports one, or two,
is that enough? How does the upper layer know the limit?
This needs an explicit device attribute, to be fixed properly.
> +
> +/**
> * cap_ipoib - Check if the port of device has the capability
> * IP over Infiniband.
> *
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> index e011027..604d035 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> @@ -118,8 +118,8 @@ static void rdma_build_arg_xdr(struct svc_rqst *rqstp,
>
> static int rdma_read_max_sge(struct svcxprt_rdma *xprt, int sge_count)
> {
> - if (rdma_node_get_transport(xprt->sc_cm_id->device->node_type) ==
> - RDMA_TRANSPORT_IWARP)
> + if (!cap_read_multi_sge(xprt->sc_cm_id->device,
> + xprt->sc_cm_id->port_num))
> return 1;
> else
> return min_t(int, sge_count, xprt->sc_max_sge);
This is incorrect. The RDMA Read max is not at all the same as the
max_sge. It is a different operation, with a different set of work
request parameters.
In other words, the above same comment applies.
> diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
> index 4e61880..e75175d 100644
> --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
> +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
> @@ -979,8 +979,8 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt)
> /*
> * Determine if a DMA MR is required and if so, what privs are required
> */
> - switch (rdma_node_get_transport(newxprt->sc_cm_id->device->node_type)) {
> - case RDMA_TRANSPORT_IWARP:
> + if (rdma_transport_iwarp(newxprt->sc_cm_id->device,
> + newxprt->sc_cm_id->port_num)) {
> newxprt->sc_dev_caps |= SVCRDMA_DEVCAP_READ_W_INV;
Do I read this correctly that it is forcing the "read with invalidate"
capability to "on" for all iWARP devices? I don't think that is correct,
for the legacy devices you're also supporting.
> @@ -992,8 +992,8 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt)
> dma_mr_acc = IB_ACCESS_LOCAL_WRITE;
> } else
> need_dma_mr = 0;
> - break;
> - case RDMA_TRANSPORT_IB:
> + } else if (rdma_ib_mgmt(newxprt->sc_cm_id->device,
> + newxprt->sc_cm_id->port_num)) {
> if (!(newxprt->sc_dev_caps & SVCRDMA_DEVCAP_FAST_REG)) {
> need_dma_mr = 1;
> dma_mr_acc = IB_ACCESS_LOCAL_WRITE;
Now I'm even more confused. How is the presence of IB management
related to needing a privileged lmr?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists