netdev - Re: Atheros 8035 PHY only works when at803x_config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5526993F.1010304@free.fr>
Date:	Thu, 09 Apr 2015 17:22:39 +0200
From:	Mason <slash.tmp@...e.fr>
To:	Daniel Mack <daniel@...que.org>, netdev@...r.kernel.org
CC:	Florian Fainelli <f.fainelli@...il.com>,
	Mugunthan <mugunthanvnm@...com>,
	"David S. Miller" <davem@...emloft.net>,
	Matus Ujhelyi <ujhelyi.m@...il.com>
Subject: Re: Atheros 8035 PHY only works when at803x_config_init() is
 commented out

Mason wrote:

> Daniel Mack wrote:
>
>> My suggestion is to dump the entire register set when
>> at803x_config_init() is entered and again when it's left. Then try to
>> find the differences and see if you can bring the PHY into the needed
>> mode through the existing configuration hooks in the kernel.
>
> [    0.685330] IDX= 1 796d != 7949
> [    0.688490] IDX= 5 c1e1 != 0000
> [    0.691647] IDX= 6 000f != 0004
> [    0.694803] IDX=10 3800 != 0000
> [    0.697960] IDX=17 bc10 != 0012
> [    0.701115] IDX=19 7400 != 0000
> [    0.704271] IDX=27 060e != 0600
>
> Hmmm, didn't expect so many differences. I'll have to take a closer look.

For the record, I dumped the PHY registers
A) upon entering phy_init_hw
B) before leaving phy_init_hw (thus right after at803x_config_init)

IDX 1: b2 LINK STATUS, b5 AUTO-NEGOTIATION COMPLETE
=> Difference in status bits, seems reasonable

IDX 5: Link partner ability (base page)
=> seems reasonable (no partner yet?)

IDX 6: Auto-Negotiation Expansion
=> seems reasonable (no partner yet?)

IDX 10: 1000 BASE-T Status (HW reset = SW reset = 0)
(ALSO: Contents of this register clear after a read operation has occurred.)
=> Looks like my own read cleared it

IDX 17: PHY-Specific Status
b1 = "POLARITY (real time)"?
=> Difference in status bits, seems reasonable? (

IDX 19: Interrupt Status
=> Looks like some interrupt requests might have been discarded?

IDX 27: This register is undocumented

Nothing looks suspicious, except maybe the Interrupt Status?

Is speed auto-negotiation supposed to be complete when phy_init_hw exits?

Regards.

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html