netdev - Re: [RFC PATCH net-next 3/8] net: phy: Allow PHY devices to identify themselves as Ethernet switches

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 30 Apr 2015 10:37:44 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	Andrew Lunn <andrew@...n.ch>
CC:	netdev@...r.kernel.org, davem@...emloft.net,
	vivien.didelot@...oirfairelinux.com,
	jerome.oufella@...oirfairelinux.com, linux@...ck-us.net,
	cphealy@...il.com, mathieu@...eaurora.org, jonasj76@...il.com,
	andrey.volkov@...vision.fr, Chris.Packham@...iedtelesis.co.nz
Subject: Re: [RFC PATCH net-next 3/8] net: phy: Allow PHY devices to identify
 themselves as Ethernet switches

On 30/04/15 10:16, Andrew Lunn wrote:
>>> Hi Florian
>>>
>>> I have another two use cases for fixed_phy which i'm thinking about
>>> implementing soon. Both require putting a fixed_phy into DSA port
>>> properties in DT.
>>>
>>> The first is when the CPU ethernet and the switch don't have the same
>>> speed capabilities. At the moment, the switch driver configures the
>>> CPU port to its maximum speed. But i know of a board coming soon with
>>> gigabit switch ports, but the CPU Ethernet is only fast Ethernet.
>>
>> With the patch after, if your switch is MDIO connected to your host, you
>> could make that happen easily, since the read_status() callback would
>> only be invoked for the CPU port from the CPU Ethernet MAC driver
>> (that's the theory).
> 
> I'm not sure i get what you are saying.
> 
> What we currently have is:
> 
> CPU ETH->fixed_phy                      Switch port CPU
> |                                       |
> +---------------------------------------+
> 
> and what i'm thinking we want is:
> 
> CPU ETH->fixed_phy          fixed_phy <-Switch port CPU
> |                                       |
> +---------------------------------------+
> 
> So that when setting up the switch side of the link, i can read from
> the switch ports fixed_phy how the port should be configured.

I see, but it still seems to me like these fixed PHY devices could be
eliminated completely only, and only if your switch is MDIO connected,
because then this becomes this:

CPU ETH -> PHY driver <- CPU port of the switch

and the PHY driver provided by your switch gives you the correct link
parameters for both ends, right?

If you do not have a MDIO switch, or something we could discover the
link parameters from, then a fixed PHY has to be used, and it seems to
me like we should have some sort of generic code doing that in DSA
today: try to find a 'fixed-link' subnode (or old 5-tuple property) in
the device tree node pointed at by dsa,ethernet, read these and feed
them back to the DSA switch driver such that link parameters can be
properly configured?

Feels like whatever we decide there is definitively something missing
today though, either the Ethernet MAC does not have the hooks to get the
parameters, or the switch has hardcoded them...
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html