[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <b7d968f7-1eb8-4a37-ae28-e7b841d6b178@BY2FFO11FD038.protection.gbl>
Date: Mon, 4 May 2015 13:22:39 +0530
From: Harini Katakam <harini.katakam@...inx.com>
To: <nicolas.ferre@...el.com>, <davem@...emloft.net>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<boris.brezillon@...e-electrons.com>,
<alexandre.belloni@...e-electrons.com>,
<harinikatakamlinux@...il.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>, <harinik@...inx.com>,
<punnaia@...inx.com>, <michals@...inx.com>
Subject: [net-next PATCH v2 2/3] net: macb: Add support for jumbo frames
Check for "cdns,zynqmp-gem" compatible string and enable jumbo frame support
in NWCFG register, update descriptor length masks and registers accordingly.
Jumbo max length register should be set according to support in SoC; it is
set to 10240 for Zynq Ultrascale+ MPSoC.
Signed-off-by: Harini Katakam <harinik@...inx.com>
Reviewed-by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
---
On v1, Michal commented that I should use macb_config for jumbo parameters
instead of defining them by reading the compatible string directly.
I can use .caps for isjumbo. But jumbo-max-length needs to be defined.
Can I add this to the structure? Any suggestions on how to handle this?
v2:
Add constant definition and update SoC name
---
drivers/net/ethernet/cadence/macb.c | 21 ++++++++++++++++++---
drivers/net/ethernet/cadence/macb.h | 8 ++++++++
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 4104d49..a065283 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -54,6 +54,8 @@
#define MACB_MAX_TX_LEN ((unsigned int)((1 << MACB_TX_FRMLEN_SIZE) - 1))
#define GEM_MAX_TX_LEN ((unsigned int)((1 << GEM_TX_FRMLEN_SIZE) - 1))
+#define GEM_ZYNQMP_JUMBO_MAX 10240
+
/*
* Graceful stop timeouts in us. We should allow up to
* 1 frame time (10 Mbits/s, full-duplex, ignoring collisions)
@@ -782,7 +784,7 @@ static int gem_rx(struct macb *bp, int budget)
}
/* now everything is ready for receiving packet */
bp->rx_skbuff[entry] = NULL;
- len = MACB_BFEXT(RX_FRMLEN, ctrl);
+ len = ctrl & bp->rx_frm_len_mask;
netdev_vdbg(bp->dev, "gem_rx %u (len %u)\n", entry, len);
@@ -828,7 +830,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
struct macb_dma_desc *desc;
desc = macb_rx_desc(bp, last_frag);
- len = MACB_BFEXT(RX_FRMLEN, desc->ctrl);
+ len = desc->ctrl & bp->rx_frm_len_mask;
netdev_vdbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
macb_rx_ring_wrap(first_frag),
@@ -1633,7 +1635,10 @@ static void macb_init_hw(struct macb *bp)
config |= MACB_BF(RBOF, NET_IP_ALIGN); /* Make eth data aligned */
config |= MACB_BIT(PAE); /* PAuse Enable */
config |= MACB_BIT(DRFCS); /* Discard Rx FCS */
- config |= MACB_BIT(BIG); /* Receive oversized frames */
+ if (bp->isjumbo)
+ config |= MACB_BIT(JFRAME); /* Enable jumbo frames */
+ else
+ config |= MACB_BIT(BIG); /* Receive oversized frames */
if (bp->dev->flags & IFF_PROMISC)
config |= MACB_BIT(CAF); /* Copy All Frames */
else if (macb_is_gem(bp) && bp->dev->features & NETIF_F_RXCSUM)
@@ -1642,8 +1647,13 @@ static void macb_init_hw(struct macb *bp)
config |= MACB_BIT(NBC); /* No BroadCast */
config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
+ if (bp->isjumbo && bp->jumbo_max_len)
+ gem_writel(bp, JML, bp->jumbo_max_len);
bp->speed = SPEED_10;
bp->duplex = DUPLEX_HALF;
+ bp->rx_frm_len_mask = MACB_RX_FRMLEN_MASK;
+ if (bp->isjumbo)
+ bp->rx_frm_len_mask = MACB_RX_JFRMLEN_MASK;
macb_configure_dma(bp);
@@ -2762,6 +2772,11 @@ static int macb_probe(struct platform_device *pdev)
bp->pclk = pclk;
bp->hclk = hclk;
bp->tx_clk = tx_clk;
+ if (of_device_is_compatible(pdev->dev.of_node, "cdns,zynqmp-gem")) {
+ bp->isjumbo = 1;
+ bp->jumbo_max_len = GEM_ZYNQMP_JUMBO_MAX;
+ }
+
spin_lock_init(&bp->lock);
/* setup capabilities */
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index eb7d76f..e25f77e 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -71,6 +71,7 @@
#define GEM_NCFGR 0x0004 /* Network Config */
#define GEM_USRIO 0x000c /* User IO */
#define GEM_DMACFG 0x0010 /* DMA Configuration */
+#define GEM_JML 0x0048 /* Jumbo Max Length */
#define GEM_HRB 0x0080 /* Hash Bottom */
#define GEM_HRT 0x0084 /* Hash Top */
#define GEM_SA1B 0x0088 /* Specific1 Bottom */
@@ -514,6 +515,9 @@ struct macb_dma_desc {
#define MACB_RX_BROADCAST_OFFSET 31
#define MACB_RX_BROADCAST_SIZE 1
+#define MACB_RX_FRMLEN_MASK 0xFFF
+#define MACB_RX_JFRMLEN_MASK 0x3FFF
+
/* RX checksum offload disabled: bit 24 clear in NCFGR */
#define GEM_RX_TYPEID_MATCH_OFFSET 22
#define GEM_RX_TYPEID_MATCH_SIZE 2
@@ -826,6 +830,10 @@ struct macb {
unsigned int max_tx_length;
u64 ethtool_stats[GEM_STATS_LEN];
+
+ unsigned int rx_frm_len_mask;
+ unsigned int jumbo_max_len;
+ bool isjumbo;
};
static inline bool macb_is_gem(struct macb *bp)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists