netdev - Re: [PATCH 02/12] net: axienet: Handle 0 packet receive gracefully

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 05 May 2015 11:53:49 -0700
From:	Joe Perches <joe@...ches.com>
To:	Michal Simek <michal.simek@...inx.com>
Cc:	netdev@...r.kernel.org,
	Peter Crosthwaite <peter.crosthwaite@...inx.com>,
	Sören Brinkmann <soren.brinkmann@...inx.com>,
	monstr@...str.eu, John Linn <John.Linn@...inx.com>,
	Anirudha Sarangi <anirudh@...inx.com>,
	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 02/12] net: axienet: Handle 0 packet receive gracefully

On Tue, 2015-05-05 at 20:49 +0200, Michal Simek wrote:
> On 05/05/2015 03:57 PM, Joe Perches wrote:
> > On Tue, 2015-05-05 at 11:25 +0200, Michal Simek wrote:
> >> From: Peter Crosthwaite <peter.crosthwaite@...inx.com>
> >>
> >> The AXI-DMA rx-delay interrupt can sometimes be triggered
> >> when there are 0 outstanding packets received. This is due
> >> to the fact that the receive function will greedily consume
> >> as many packets as possible on interrupt. So if two packets
> >> (with a very particular timing) arrive in succession they
> >> will each cause the rx-delay interrupt, but the first interrupt
> >> will consume both packets.
> >> This means the second interrupt is a 0 packet receive.
> >>
> >> This is mostly OK, except that the tail pointer register is
> >> updated unconditionally on receive. Currently the tail pointer
> >> is always set to the current bd-ring descriptor under
> >> the assumption that the hardware has moved onto the next
> >> descriptor. What this means for length 0 recv is the current
> >> descriptor that the hardware is potentially yet to use will
> >> be marked as the tail. This causes the hardware to think
> >> its run out of descriptors deadlocking the whole rx path.
> >>
> >> Fixed by updating the tail pointer to the most recent
> >> successfully consumed descriptor.
> > 
> > I think some of this would be good to have as comments
> > in the code instead of just in the changelog.
> Is it really needed? If yes, no problem to add it but git blame can
> point you to that.

That's up to you.

I think that useful but concealed information is
always hard to follow or find.


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html