| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1431003943-14906-11-git-send-email-madalin.bucur@freescale.com>
Date: Thu, 7 May 2015 16:05:42 +0300
From: Madalin Bucur <madalin.bucur@...escale.com>
To: <netdev@...r.kernel.org>
CC: Igal Liberman <Igal.Liberman@...escale.com>
Subject: [RFC,v3 11/12] fsl/fman: Add FMan Port Support
From: Igal Liberman <Igal.Liberman@...escale.com>
This patch adds The FMan Port configuration, initialization and
runtime control routines.
Signed-off-by: Igal Liberman <Igal.Liberman@...escale.com>
---
drivers/net/ethernet/freescale/fman/Makefile | 2 +-
drivers/net/ethernet/freescale/fman/fm.c | 492 ++++++-
drivers/net/ethernet/freescale/fman/fm_common.h | 172 ++-
drivers/net/ethernet/freescale/fman/fm_drv.c | 119 +-
drivers/net/ethernet/freescale/fman/fm_drv.h | 2 +
drivers/net/ethernet/freescale/fman/fm_port_drv.c | 536 +++++++
drivers/net/ethernet/freescale/fman/inc/fm_ext.h | 58 +
.../net/ethernet/freescale/fman/inc/fm_port_ext.h | 397 ++++++
.../net/ethernet/freescale/fman/inc/fsl_fman_drv.h | 98 ++
drivers/net/ethernet/freescale/fman/port/Makefile | 2 +-
drivers/net/ethernet/freescale/fman/port/fm_port.c | 1484 ++++++++++++++++++++
drivers/net/ethernet/freescale/fman/port/fm_port.h | 711 ++++++++++
12 files changed, 4066 insertions(+), 7 deletions(-)
create mode 100644 drivers/net/ethernet/freescale/fman/fm_port_drv.c
create mode 100644 drivers/net/ethernet/freescale/fman/inc/fm_port_ext.h
create mode 100644 drivers/net/ethernet/freescale/fman/port/fm_port.c
create mode 100644 drivers/net/ethernet/freescale/fman/port/fm_port.h
diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile
index c6c3e24..8d637e2 100644
--- a/drivers/net/ethernet/freescale/fman/Makefile
+++ b/drivers/net/ethernet/freescale/fman/Makefile
@@ -4,7 +4,7 @@ subdir-ccflags-y += -I$(srctree)/drivers/net/ethernet/freescale/fman/flib \
obj-y += fsl_fman.o
-fsl_fman-objs := fman.o fm_muram.o fm.o fm_drv.o
+fsl_fman-objs := fman.o fm_muram.o fm.o fm_drv.o fm_port_drv.o
obj-y += port/
obj-y += mac/
diff --git a/drivers/net/ethernet/freescale/fman/fm.c b/drivers/net/ethernet/freescale/fman/fm.c
index c8889bd..7670fef 100644
--- a/drivers/net/ethernet/freescale/fman/fm.c
+++ b/drivers/net/ethernet/freescale/fman/fm.c
@@ -459,11 +459,36 @@ static void qmi_err_event(struct fm_t *p_fm)
static void dma_err_event(struct fm_t *p_fm)
{
- uint32_t status;
+ uint32_t status, com_id;
+ uint8_t tnum;
+ uint8_t port_id;
+ uint8_t relative_port_id;
+ uint16_t liodn;
struct fman_dma_regs __iomem *dma_rg = p_fm->p_fm_dma_regs;
status = fman_get_dma_err_event(dma_rg);
+ if (status & DMA_STATUS_BUS_ERR) {
+ com_id = fman_get_dma_com_id(dma_rg);
+ port_id = (uint8_t)(((com_id & DMA_TRANSFER_PORTID_MASK) >>
+ DMA_TRANSFER_PORTID_SHIFT));
+ HW_PORT_ID_TO_SW_PORT_ID(p_fm->p_fm_state_struct->rev_info.
+ major_rev,
+ relative_port_id,
+ port_id);
+ tnum =
+ (uint8_t)((com_id & DMA_TRANSFER_TNUM_MASK) >>
+ DMA_TRANSFER_TNUM_SHIFT);
+ liodn = (uint16_t)(com_id & DMA_TRANSFER_LIODN_MASK);
+ ASSERT(p_fm->p_fm_state_struct->
+ ports_types[port_id] !=
+ FM_PORT_TYPE_DUMMY);
+ p_fm->f_bus_error(p_fm->h_app,
+ p_fm->p_fm_state_struct->
+ ports_types[port_id],
+ relative_port_id,
+ fman_get_dma_addr(dma_rg), tnum, liodn);
+ }
if (status & DMA_STATUS_FM_SPDAT_ECC)
p_fm->f_exception(p_fm->h_app, FM_EX_DMA_SINGLE_PORT_ECC);
if (status & DMA_STATUS_READ_ECC)
@@ -769,6 +794,467 @@ uint8_t fm_get_id(void *h_fm)
return p_fm->p_fm_state_struct->fm_id;
}
+int fm_get_set_port_params(void *h_fm,
+ struct fm_inter_module_port_init_params_t
+ *p_port_params)
+{
+ struct fm_t *p_fm = (struct fm_t *)h_fm;
+ int err;
+ unsigned long int_flags;
+ uint8_t port_id = p_port_params->port_id, mac_id;
+ struct fman_rg fman_rg;
+
+ fman_rg.bmi_rg = p_fm->p_fm_bmi_regs;
+ fman_rg.qmi_rg = p_fm->p_fm_qmi_regs;
+ fman_rg.fpm_rg = p_fm->p_fm_fpm_regs;
+ fman_rg.dma_rg = p_fm->p_fm_dma_regs;
+
+ ASSERT(IN_RANGE(1, port_id, 63));
+
+ spin_lock_irqsave(p_fm->spinlock, int_flags);
+
+ p_fm->p_fm_state_struct->ports_types[port_id] =
+ p_port_params->port_type;
+
+ err =
+ fm_set_num_of_tasks(p_fm, p_port_params->port_id,
+ &p_port_params->num_of_tasks,
+ &p_port_params->num_of_extra_tasks, true);
+ if (err) {
+ spin_unlock_irqrestore(p_fm->spinlock, int_flags);
+ return err;
+ }
+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
+ if (p_fm->p_fm_state_struct->rev_info.major_rev != 4)
+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
+ /* for transmit&O/H ports */
+ if (p_port_params->port_type != FM_PORT_TYPE_RX) {
+ uint8_t enq_th;
+ uint8_t deq_th;
+
+ /* update qmi ENQ/DEQ threshold */
+ p_fm->p_fm_state_struct->accumulated_num_of_deq_tnums +=
+ p_port_params->deq_pipeline_depth;
+ enq_th = fman_get_qmi_enq_th(fman_rg.qmi_rg);
+ /* if enq_th is too big, we reduce it to the max value
+ * that is still 0
+ */
+ if (enq_th >=
+ (p_fm->intg->qmi_max_num_of_tnums -
+ p_fm->p_fm_state_struct->
+ accumulated_num_of_deq_tnums)) {
+ enq_th = (uint8_t)(
+ p_fm->intg->
+ qmi_max_num_of_tnums -
+ p_fm->p_fm_state_struct->
+ accumulated_num_of_deq_tnums - 1);
+ fman_set_qmi_enq_th(fman_rg.qmi_rg, enq_th);
+ }
+
+ deq_th = fman_get_qmi_deq_th(fman_rg.qmi_rg);
+ /* if deq_th is too small, we enlarge it to the min
+ * value that is still 0.
+ * depTh may not be larger than 63
+ * (p_fm->intg->qmi_max_num_of_tnums-1).
+ */
+ if ((deq_th <=
+ p_fm->p_fm_state_struct->
+ accumulated_num_of_deq_tnums) &&
+ (deq_th <
+ p_fm->intg->
+ qmi_max_num_of_tnums - 1)) {
+ deq_th = (uint8_t)(p_fm->
+ p_fm_state_struct->
+ accumulated_num_of_deq_tnums
+ + 1);
+ fman_set_qmi_deq_th(fman_rg.qmi_rg, deq_th);
+ }
+ }
+#ifdef FM_LOW_END_RESTRICTION
+ if (p_fm->p_fm_state_struct->rev_info.major_rev == 0x4) {
+ if ((port_id == 0x1) || (port_id == 0x29)) {
+ if (p_fm->p_fm_state_struct->low_end_restriction) {
+ spin_unlock_irqrestore(p_fm->spinlock,
+ int_flags);
+ pr_err("OP#0 can't work with Tx Port1\n");
+ return -EAGAIN;
+ }
+ p_fm->p_fm_state_struct->low_end_restriction = true;
+ }
+ }
+#endif /* FM_LOW_END_RESTRICTION */
+
+ err = fm_set_size_of_fifo(p_fm,
+ p_port_params->port_id,
+ &p_port_params->size_of_fifo,
+ &p_port_params->extra_size_of_fifo, true);
+ if (err) {
+ spin_unlock_irqrestore(p_fm->spinlock, int_flags);
+ return err;
+ }
+
+ err = fm_set_num_of_open_dmas(p_fm,
+ p_port_params->port_id,
+ &p_port_params->num_of_open_dmas,
+ &p_port_params->num_of_extra_open_dmas,
+ true);
+ if (err) {
+ spin_unlock_irqrestore(p_fm->spinlock,
+ (unsigned long)int_flags);
+ return err;
+ }
+
+ fman_set_liodn_per_port(&fman_rg,
+ port_id,
+ p_port_params->liodn_base,
+ p_port_params->liodn_offset);
+
+ if (p_fm->p_fm_state_struct->rev_info.major_rev < 6)
+ fman_set_order_restoration_per_port(fman_rg.fpm_rg,
+ port_id,
+ !!((p_port_params->
+ port_type ==
+ FM_PORT_TYPE_RX)));
+
+ HW_PORT_ID_TO_SW_PORT_ID(p_fm->p_fm_state_struct->rev_info.major_rev,
+ mac_id,
+ port_id);
+
+ if (p_port_params->max_frame_length >=
+ p_fm->p_fm_state_struct->mac_max_frame_lengths[mac_id]) {
+ p_fm->p_fm_state_struct->port_max_frame_lengths[mac_id] =
+ p_port_params->max_frame_length;
+ } else {
+ pr_warn("Port max_frame_length is smaller than MAC current MTU\n");
+ spin_unlock_irqrestore(p_fm->spinlock,
+ (unsigned long)int_flags);
+ return -EDOM;
+ }
+
+ spin_unlock_irqrestore(p_fm->spinlock, (unsigned long)int_flags);
+
+ return 0;
+}
+
+void fm_free_port_params(void *h_fm,
+ struct fm_inter_module_port_free_params_t
+ *p_port_params)
+{
+ struct fm_t *p_fm = (struct fm_t *)h_fm;
+ unsigned long int_flags;
+ uint8_t port_id = p_port_params->port_id;
+ uint8_t num_of_tasks, num_of_dmas, mac_id;
+ uint16_t size_of_fifo;
+ struct fman_qmi_regs __iomem *qmi_rg = p_fm->p_fm_qmi_regs;
+ struct fman_bmi_regs __iomem *bmi_rg = p_fm->p_fm_bmi_regs;
+
+ ASSERT(IN_RANGE(1, port_id, 63));
+
+ spin_lock_irqsave(p_fm->spinlock, int_flags);
+
+ p_fm->p_fm_state_struct->ports_types[port_id] =
+ FM_PORT_TYPE_DUMMY;
+
+ /* free num_of_tasks */
+ num_of_tasks = fman_get_num_of_tasks(bmi_rg, port_id);
+ ASSERT(p_fm->p_fm_state_struct->accumulated_num_of_tasks >=
+ num_of_tasks);
+ p_fm->p_fm_state_struct->accumulated_num_of_tasks -= num_of_tasks;
+
+ /* free num_of_open_dmas */
+ num_of_dmas = fman_get_num_of_dmas(bmi_rg, port_id);
+ ASSERT(p_fm->p_fm_state_struct->accumulated_num_of_open_dmas >=
+ num_of_dmas);
+ p_fm->p_fm_state_struct->accumulated_num_of_open_dmas -= num_of_dmas;
+
+#ifdef FM_HAS_TOTAL_DMAS
+ if (p_fm->p_fm_state_struct->rev_info.major_rev < 6) {
+ /* update total num of DMA's with committed number
+ * of open DMAS, and max uncommitted pool.
+ */
+ fman_set_num_of_open_dmas(bmi_rg,
+ port_id,
+ 1,
+ 0,
+ (uint8_t)
+ (p_fm->p_fm_state_struct->
+ accumulated_num_of_open_dmas +
+ p_fm->p_fm_state_struct->
+ extra_open_dmas_pool_size
+ ));
+ }
+#endif /* FM_HAS_TOTAL_DMAS */
+
+ /* free size_of_fifo */
+ size_of_fifo = fman_get_size_of_fifo(bmi_rg, port_id);
+ ASSERT(p_fm->p_fm_state_struct->accumulated_fifo_size >=
+ (size_of_fifo * BMI_FIFO_UNITS));
+ p_fm->p_fm_state_struct->accumulated_fifo_size -=
+ (size_of_fifo * BMI_FIFO_UNITS);
+
+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
+ if (p_fm->p_fm_state_struct->rev_info.major_rev != 4)
+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
+ /* for transmit&O/H ports */
+ if (p_port_params->port_type != FM_PORT_TYPE_RX) {
+ uint8_t enq_th;
+ uint8_t deq_th;
+
+ /* update qmi ENQ/DEQ threshold */
+ p_fm->p_fm_state_struct->accumulated_num_of_deq_tnums -=
+ p_port_params->deq_pipeline_depth;
+
+ /* p_fm->p_fm_state_struct->
+ * accumulated_num_of_deq_tnums is now smaller,
+ * so we can enlarge enq_th
+ */
+ enq_th =
+ (uint8_t)(p_fm->intg->qmi_max_num_of_tnums -
+ p_fm->p_fm_state_struct->
+ accumulated_num_of_deq_tnums - 1);
+
+ /* p_fm->p_fm_state_struct->
+ * accumulated_num_of_deq_tnums is now smaller,
+ * so we can reduce deq_th
+ */
+ deq_th =
+ (uint8_t)(p_fm->p_fm_state_struct->
+ accumulated_num_of_deq_tnums + 1);
+
+ fman_set_qmi_enq_th(qmi_rg, enq_th);
+ fman_set_qmi_deq_th(qmi_rg, deq_th);
+ }
+
+ HW_PORT_ID_TO_SW_PORT_ID(p_fm->p_fm_state_struct->rev_info.major_rev,
+ mac_id,
+ port_id);
+
+ p_fm->p_fm_state_struct->port_max_frame_lengths[mac_id] = 0;
+
+#ifdef FM_LOW_END_RESTRICTION
+ if (p_fm->p_fm_state_struct->rev_info.major_rev == 0x4) {
+ if ((port_id == 0x1) || (port_id == 0x29))
+ p_fm->p_fm_state_struct->low_end_restriction = false;
+ }
+#endif /* FM_LOW_END_RESTRICTION */
+ spin_unlock_irqrestore(p_fm->spinlock, int_flags);
+}
+
+int fm_set_size_of_fifo(void *h_fm,
+ uint8_t port_id,
+ uint32_t *p_size_of_fifo,
+ uint32_t *p_extra_size_of_fifo,
+ bool initial_config)
+{
+ struct fm_t *p_fm = (struct fm_t *)h_fm;
+ struct fman_bmi_regs __iomem *bmi_rg = p_fm->p_fm_bmi_regs;
+ uint32_t size_of_fifo = *p_size_of_fifo, extra_size_of_fifo =
+ *p_extra_size_of_fifo;
+ uint16_t current_val = 0, current_extra_val = 0;
+
+ ASSERT(IN_RANGE(1, port_id, 63));
+
+ if (!initial_config) {
+ /* !initial_config - runtime change of existing value.
+ * - read the current FIFO and extra FIFO size
+ */
+ current_extra_val =
+ fman_get_size_of_extra_fifo(bmi_rg, port_id);
+ current_val = fman_get_size_of_fifo(bmi_rg, port_id);
+ }
+
+ if (extra_size_of_fifo > current_extra_val) {
+ if (extra_size_of_fifo &&
+ !p_fm->p_fm_state_struct->extra_fifo_pool_size)
+ /* if this is the first time a port
+ * requires extra_fifo_pool_size,
+ * the total extra_fifo_pool_size
+ * must be initialized to 1 buffer per port
+ */
+ p_fm->p_fm_state_struct->extra_fifo_pool_size =
+ p_fm->intg->num_of_rx_ports * BMI_FIFO_UNITS;
+
+ p_fm->p_fm_state_struct->extra_fifo_pool_size =
+ max(p_fm->p_fm_state_struct->extra_fifo_pool_size,
+ extra_size_of_fifo);
+ }
+
+ /* check that there are enough uncommitted fifo size */
+ if ((p_fm->p_fm_state_struct->accumulated_fifo_size - current_val +
+ size_of_fifo) >
+ (p_fm->p_fm_state_struct->total_fifo_size -
+ p_fm->p_fm_state_struct->extra_fifo_pool_size)) {
+ pr_err("Requested fifo size and extra size exceed total FIFO size.\n");
+ return -EAGAIN;
+ }
+ /* update accumulated */
+ ASSERT(p_fm->p_fm_state_struct->accumulated_fifo_size >=
+ current_val);
+ p_fm->p_fm_state_struct->accumulated_fifo_size -= current_val;
+ p_fm->p_fm_state_struct->accumulated_fifo_size += size_of_fifo;
+ fman_set_size_of_fifo(bmi_rg, port_id, size_of_fifo,
+ extra_size_of_fifo);
+
+ return 0;
+}
+
+int fm_set_num_of_tasks(void *h_fm,
+ uint8_t port_id,
+ uint8_t *p_num_of_tasks,
+ uint8_t *p_num_of_extra_tasks, bool initial_config)
+{
+ struct fm_t *p_fm = (struct fm_t *)h_fm;
+ struct fman_bmi_regs __iomem *bmi_rg = p_fm->p_fm_bmi_regs;
+ uint8_t current_val = 0, current_extra_val = 0, num_of_tasks =
+ *p_num_of_tasks, num_of_extra_tasks = *p_num_of_extra_tasks;
+
+ ASSERT(IN_RANGE(1, port_id, 63));
+
+ if (!initial_config) {
+ /* !initial_config - runtime change of existing value.
+ * - read the current number of tasks
+ */
+ current_val = fman_get_num_of_tasks(bmi_rg, port_id);
+ current_extra_val =
+ fman_get_num_extra_tasks(bmi_rg, port_id);
+ }
+
+ if (num_of_extra_tasks > current_extra_val)
+ p_fm->p_fm_state_struct->extra_tasks_pool_size =
+ (uint8_t)max(p_fm->p_fm_state_struct->extra_tasks_pool_size,
+ num_of_extra_tasks);
+
+ /* check that there are enough uncommitted tasks */
+ if ((p_fm->p_fm_state_struct->accumulated_num_of_tasks - current_val +
+ num_of_tasks) >
+ (p_fm->p_fm_state_struct->total_num_of_tasks -
+ p_fm->p_fm_state_struct->extra_tasks_pool_size)) {
+ pr_err("Requested num_of_tasks and extra tasks pool for fm%d exceed total num_of_tasks.\n",
+ p_fm->p_fm_state_struct->fm_id);
+ return -EAGAIN;
+ }
+ ASSERT(p_fm->p_fm_state_struct->
+ accumulated_num_of_tasks >=
+ current_val);
+ /* update accumulated */
+ p_fm->p_fm_state_struct->accumulated_num_of_tasks -=
+ current_val;
+ p_fm->p_fm_state_struct->accumulated_num_of_tasks +=
+ num_of_tasks;
+ fman_set_num_of_tasks(bmi_rg, port_id, num_of_tasks,
+ num_of_extra_tasks);
+
+ return 0;
+}
+
+int fm_set_num_of_open_dmas(void *h_fm,
+ uint8_t port_id,
+ uint8_t *p_num_of_open_dmas,
+ uint8_t *p_num_of_extra_open_dmas,
+ bool initial_config)
+{
+ struct fm_t *p_fm = (struct fm_t *)h_fm;
+ struct fman_bmi_regs __iomem *bmi_rg = p_fm->p_fm_bmi_regs;
+ uint8_t num_of_open_dmas = *p_num_of_open_dmas,
+ num_of_extra_open_dmas = *p_num_of_extra_open_dmas;
+ uint8_t total_num_dmas = 0, current_val = 0, current_extra_val = 0;
+
+ ASSERT(IN_RANGE(1, port_id, 63));
+
+ if (!initial_config) {
+ /* !initial_config - runtime change of existing value.
+ * - read the current number of open Dma's
+ */
+ current_extra_val =
+ fman_get_num_extra_dmas(bmi_rg, port_id);
+ current_val = fman_get_num_of_dmas(bmi_rg, port_id);
+ }
+
+ /* it's illegal to be in a state where this is
+ * not the first set and no value is specified
+ */
+ ASSERT(initial_config || num_of_open_dmas);
+ if (!num_of_open_dmas) {
+ /* !num_of_open_dmas - first configuration according
+ * to values in regs.- read the current number of
+ * open Dma's
+ */
+ current_extra_val =
+ fman_get_num_extra_dmas(bmi_rg, port_id);
+ current_val = fman_get_num_of_dmas(bmi_rg, port_id);
+ /* This is the first configuration and user did not
+ * specify value (!num_of_open_dmas), reset values will be used
+ * and we just save these values for resource management
+ */
+ p_fm->p_fm_state_struct->extra_open_dmas_pool_size =
+ (uint8_t)max(p_fm->p_fm_state_struct->
+ extra_open_dmas_pool_size,
+ current_extra_val);
+ p_fm->p_fm_state_struct->accumulated_num_of_open_dmas +=
+ current_val;
+ *p_num_of_open_dmas = current_val;
+ *p_num_of_extra_open_dmas = current_extra_val;
+ return 0;
+ }
+
+ if (num_of_extra_open_dmas > current_extra_val)
+ p_fm->p_fm_state_struct->extra_open_dmas_pool_size =
+ (uint8_t)max(p_fm->p_fm_state_struct->
+ extra_open_dmas_pool_size,
+ num_of_extra_open_dmas);
+
+#ifdef FM_HAS_TOTAL_DMAS
+ if ((p_fm->p_fm_state_struct->rev_info.major_rev < 6) &&
+ (p_fm->p_fm_state_struct->accumulated_num_of_open_dmas -
+ current_val + num_of_open_dmas >
+ p_fm->p_fm_state_struct->max_num_of_open_dmas)) {
+ pr_err("Requested num_of_open_dmas for fm%d exceeds total num_of_open_dmas.\n",
+ p_fm->p_fm_state_struct->fm_id);
+ return -EAGAIN;
+ }
+#else
+ if ((p_fm->p_fm_state_struct->rev_info.major_rev >= 6) &&
+ #ifdef FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
+ !((p_fm->p_fm_state_struct->rev_info.major_rev == 6) &&
+ (p_fm->p_fm_state_struct->rev_info.minor_rev == 0)) &&
+#endif /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 */
+ (p_fm->p_fm_state_struct->accumulated_num_of_open_dmas -
+ current_val + num_of_open_dmas >
+ p_fm->intg->dma_thresh_max_commq + 1)) {
+ pr_err("Requested num_of_open_dmas for fm%d exceeds DMA Command queue (%d)\n",
+ p_fm->p_fm_state_struct->fm_id,
+ p_fm->intg->dma_thresh_max_commq + 1);
+ return -EAGAIN;
+ }
+#endif /* FM_HAS_TOTAL_DMAS */
+ else {
+ ASSERT(p_fm->p_fm_state_struct->
+ accumulated_num_of_open_dmas >=
+ current_val);
+ /* update acummulated */
+ p_fm->p_fm_state_struct->accumulated_num_of_open_dmas -=
+ current_val;
+ p_fm->p_fm_state_struct->accumulated_num_of_open_dmas +=
+ num_of_open_dmas;
+
+#ifdef FM_HAS_TOTAL_DMAS
+ if (p_fm->p_fm_state_struct->rev_info.major_rev < 6)
+ total_num_dmas =
+ (uint8_t)(p_fm->p_fm_state_struct->
+ accumulated_num_of_open_dmas +
+ p_fm->p_fm_state_struct->
+ extra_open_dmas_pool_size);
+#endif /* FM_HAS_TOTAL_DMAS */
+ fman_set_num_of_open_dmas(bmi_rg,
+ port_id,
+ num_of_open_dmas,
+ num_of_extra_open_dmas,
+ total_num_dmas);
+ }
+
+ return 0;
+}
+
int fm_reset_mac(void *h_fm, enum fm_mac_type type, uint8_t mac_id)
{
struct fm_t *p_fm = (struct fm_t *)h_fm;
@@ -928,6 +1414,7 @@ static int init_fm_qmi(struct fm_t *p_fm)
void *fm_config(struct fm_params_t *p_fm_param)
{
struct fm_t *p_fm;
+ uint8_t i;
uintptr_t base_addr;
if (!((p_fm_param->firmware.p_code && p_fm_param->firmware.size) ||
@@ -952,6 +1439,9 @@ void *fm_config(struct fm_params_t *p_fm_param)
/* Initialize FM parameters which will be kept by the driver */
p_fm->p_fm_state_struct->fm_id = p_fm_param->fm_id;
+ for (i = 0; i < FM_MAX_NUM_OF_HW_PORT_IDS; i++)
+ p_fm->p_fm_state_struct->ports_types[i] = FM_PORT_TYPE_DUMMY;
+
/* Allocate the FM driver's parameters structure */
p_fm->p_fm_drv_param = kzalloc(sizeof(*p_fm->p_fm_drv_param),
GFP_KERNEL);
diff --git a/drivers/net/ethernet/freescale/fman/fm_common.h b/drivers/net/ethernet/freescale/fman/fm_common.h
index 4fe12c6..374c43b 100644
--- a/drivers/net/ethernet/freescale/fman/fm_common.h
+++ b/drivers/net/ethernet/freescale/fman/fm_common.h
@@ -41,6 +41,14 @@
#define CLS_PLAN_NUM_PER_GRP 8
+/* Defines used for manipulation CC and BMI */
+#define UPDATE_NIA_PNEN 0x80000000
+#define UPDATE_NIA_PNDN 0x20000000
+#define UPDATE_FMFP_PRC_WITH_ONE_RISC_ONLY 0x10000000
+#define UPDATE_NIA_FENE 0x04000000
+#define UPDATE_NIA_CMNE 0x02000000
+#define UPDATE_NIA_FPNE 0x01000000
+
/* list_object
* Macro to get the struct (object) for this entry.
* type - The type of the struct (object) this list
@@ -53,6 +61,12 @@
#define list_object(p_list, type, member) \
((type *)((char *)(p_list) - member_offset(type, member)))
+#define FM_LIODN_OFFSET_MASK 0x3FF
+
+/* NIA Description */
+/* V3 only */
+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME 0x00000028
+
/* Enum for inter-module interrupts registration */
enum fm_event_modules {
FM_MOD_PRS = 0, /* Parser event */
@@ -168,6 +182,59 @@ static inline bool TRY_LOCK(spinlock_t *spinlock, volatile bool *p_flag)
#define FM_LIODN_OFFSET_MASK 0x3FF
+/* NIA Description */
+#define NIA_ENG_MASK 0x007C0000
+#define NIA_AC_MASK 0x0003ffff
+
+#define NIA_ORDER_RESTOR 0x00800000
+#define NIA_ENG_FM_CTL 0x00000000
+#define NIA_ENG_PRS 0x00440000
+#define NIA_ENG_BMI 0x00500000
+#define NIA_ENG_QMI_ENQ 0x00540000
+#define NIA_ENG_QMI_DEQ 0x00580000
+
+#define NIA_FM_CTL_AC_HC 0x0000000C
+#define NIA_FM_CTL_AC_IND_MODE_TX 0x00000008
+#define NIA_FM_CTL_AC_IND_MODE_RX 0x0000000A
+#define NIA_FM_CTL_AC_POP_TO_N_STEP 0x0000000e
+#define NIA_FM_CTL_AC_PRE_BMI_FETCH_HEADER 0x00000010
+#define NIA_FM_CTL_AC_PRE_BMI_FETCH_FULL_FRAME 0x00000018
+#define NIA_FM_CTL_AC_POST_BMI_FETCH 0x00000012
+#define NIA_FM_CTL_AC_PRE_BMI_ENQ_FRAME 0x0000001A
+#define NIA_FM_CTL_AC_PRE_BMI_DISCARD_FRAME 0x0000001E
+#define NIA_FM_CTL_AC_POST_BMI_ENQ_ORR 0x00000014
+#define NIA_FM_CTL_AC_POST_BMI_ENQ 0x00000022
+#define NIA_FM_CTL_AC_POST_TX 0x00000024
+/* V3 only */
+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME 0x00000028
+#define NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_DISCARD_FRAME 0x0000002A
+#define NIA_FM_CTL_AC_NO_IPACC_POP_TO_N_STEP 0x0000002C
+
+#define NIA_BMI_AC_ENQ_FRAME 0x00000002
+#define NIA_BMI_AC_TX_RELEASE 0x000002C0
+#define NIA_BMI_AC_RELEASE 0x000000C0
+#define NIA_BMI_AC_DISCARD 0x000000C1
+#define NIA_BMI_AC_TX 0x00000274
+#define NIA_BMI_AC_FETCH 0x00000208
+#define NIA_BMI_AC_MASK 0x000003FF
+
+#define NIA_BMI_AC_ENQ_FRAME_WITHOUT_DMA 0x00000202
+
+#define GET_NIA_BMI_AC_ENQ_FRAME(GET_NIA_BMI_AC_ENQ_FRAME, errata_A006675)\
+ (errata_A006675 ? \
+ ((uint32_t)(NIA_ENG_FM_CTL | \
+ NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME)) : \
+ ((uint32_t)(NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME)))
+#define GET_NIA_BMI_AC_DISCARD_FRAME(h_fm_pcd, errata_A006675) \
+ (errata_A006675 ? \
+ ((uint32_t)(NIA_ENG_FM_CTL | \
+ NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_DISCARD_FRAME)) : \
+ ((uint32_t)(NIA_ENG_BMI | NIA_BMI_AC_DISCARD)))
+#define GET_NO_PCD_NIA_BMI_AC_ENQ_FRAME(errata_A006675) \
+ (errata_A006675 ? \
+ (NIA_ENG_FM_CTL | NIA_FM_CTL_AC_NO_IPACC_PRE_BMI_ENQ_FRAME) :\
+ (NIA_ENG_BMI | NIA_BMI_AC_ENQ_FRAME))
+
/* Description CTRL Parameters Page defines */
#define FM_CTL_PARAMS_PAGE_OP_FIX_EN 0x80000000
#define FM_CTL_PARAMS_PAGE_ALWAYS_ON 0x00000100
@@ -198,6 +265,20 @@ do { \
} \
} while (0)
+#define HW_PORT_ID_TO_SW_PORT_ID(major, _mac_id, port_id) \
+do { \
+ if (port_id >= BASE_TX_PORTID) \
+ _mac_id = (uint8_t)(port_id - BASE_TX_PORTID); \
+ else if (port_id >= BASE_RX_PORTID) \
+ _mac_id = (uint8_t)(port_id - BASE_RX_PORTID); \
+ else if (port_id >= BASE_OH_PORTID(major)) \
+ _mac_id = (uint8_t)(port_id - BASE_OH_PORTID(major)); \
+ else { \
+ _mac_id = (uint8_t)DUMMY_PORT_ID; \
+ ASSERT(true); \
+ } \
+} while (0)
+
#define BMI_MAX_FIFO_SIZE (FM_MURAM_SIZE)
#define BMI_FIFO_UNITS 0x100
@@ -258,9 +339,7 @@ default: \
} \
} while (0)
-#define FM_PCD_MAX_NUM_OF_OPTIONS(cls_plan_entries) \
-((cls_plan_entries == 256) ? 8 : ((cls_plan_entries == 128) ? 7 : \
-((cls_plan_entries == 64) ? 6 : ((cls_plan_entries == 32) ? 5 : 0))))
+/* Common API for FM-Port module */
/* Function fm_register_intr
* Description Used to register
@@ -300,6 +379,53 @@ enum fm_mac_type {
FM_MAC_1G /* 1G MAC */
};
+/* Description Structure for port-FM communication
+ * during fm_port_init. Fields commented 'IN' are passed
+ * by the port module to be used by the FM module.
+ * Fields commented 'OUT' will be filled by FM before returning to port.
+ * Some fields are optional (depending on configuration) and
+ * will be analized by the port and FM modules accordingly.
+ */
+struct fm_inter_module_port_init_params_t {
+ uint8_t port_id;
+ /* IN. port Id */
+ enum fm_port_type port_type;
+ /* IN. Port type */
+ enum fm_port_speed port_speed;
+ /* IN. Port speed */
+ /* IN. Port's requested resource*/
+ uint16_t liodn_offset;
+ /* IN. Port's requested resource */
+ uint8_t num_of_tasks;
+ /* IN. Port's requested resource */
+ uint8_t num_of_extra_tasks;
+ /* IN. Port's requested resource */
+ uint8_t num_of_open_dmas;
+ /* IN. Port's requested resource */
+ uint8_t num_of_extra_open_dmas;
+ /* IN. Port's requested resource */
+ uint32_t size_of_fifo;
+ /* IN. Port's requested resource */
+ uint32_t extra_size_of_fifo;
+ /* IN. Port's requested resource */
+ uint8_t deq_pipeline_depth;
+ /* IN. Port's max frame length. */
+ uint16_t max_frame_length;
+ /* IN. Irrelevant for P4080 rev 1.
+ * LIODN base for this port, to be
+ * used together with LIODN offset.
+ */
+ uint16_t liodn_base;
+};
+
+/* Description Structure for port-FM communication during fm_port_free.*/
+struct fm_inter_module_port_free_params_t {
+ uint8_t port_id; /* IN. port Id */
+ enum fm_port_type port_type; /* IN. Port type */
+ enum fm_port_speed port_speed; /* IN. Port speed */
+ uint8_t deq_pipeline_depth; /* IN. Port's requested resource */
+};
+
/* Function fm_get_muram_pointer
* Description Get the pointer of the MURAM from the FM module
* Param[in] h_fm A handle to an FM Module.
@@ -342,6 +468,29 @@ uint16_t fm_get_clock_freq(void *h_fm);
*/
uint8_t fm_get_id(void *h_fm);
+/* Function fm_get_set_port_params
+ * Description Used by FM-PORT driver to pass and receive parameters between
+ * PORT and FM modules.
+ * Param[in] h_fm A handle to an FM Module.
+ * Param[in,out] p_port_params A structure of FM Port parameters.
+ * Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_init().
+ */
+int fm_get_set_port_params(void *h_fm,
+ struct fm_inter_module_port_init_params_t
+ *p_port_params);
+
+/* Function fm_free_port_params
+ * Description Used by FM-PORT driver to free port's resources within the FM.
+ * Param[in] h_fm A handle to an FM Module.
+ * Param[in,out] p_port_params A structure of FM Port parameters.
+ * Return None.
+ * Cautions Allowed only following fm_init().
+ */
+void fm_free_port_params(void *h_fm,
+ struct fm_inter_module_port_free_params_t
+ *p_port_params);
+
#ifdef FM_TX_ECC_FRMS_ERRATA_10GMAC_A004
int fm_10g_tx_ecc_workaround(void *h_fm, uint8_t mac_id);
#endif /* FM_TX_ECC_FRMS_ERRATA_10GMAC_A004 */
@@ -368,5 +517,22 @@ struct num_of_ports_info_t *fm_get_num_of_ports(void *h_fm);
int fm_set_mac_max_frame(void *h_fm, enum fm_mac_type type,
uint8_t mac_id, uint16_t mtu);
+int fm_set_num_of_open_dmas(void *h_fm,
+ uint8_t port_id,
+ uint8_t *p_num_of_open_dmas,
+ uint8_t *p_num_of_extra_open_dmas,
+ bool initial_config);
+int fm_set_num_of_tasks(void *h_fm,
+ uint8_t port_id,
+ uint8_t *p_num_of_tasks,
+ uint8_t *p_num_of_extra_tasks,
+ bool initial_config);
+int fm_set_size_of_fifo(void *h_fm,
+ uint8_t port_id,
+ uint32_t *p_size_of_fifo,
+ uint32_t *p_extra_size_of_fifo,
+ bool initial_config);
+
+uint32_t fm_get_bmi_max_fifo_size(void *h_fm);
#endif /* __FM_COMMON_H */
diff --git a/drivers/net/ethernet/freescale/fman/fm_drv.c b/drivers/net/ethernet/freescale/fman/fm_drv.c
index 2d8db7f..c8eb3a3 100644
--- a/drivers/net/ethernet/freescale/fman/fm_drv.c
+++ b/drivers/net/ethernet/freescale/fman/fm_drv.c
@@ -219,6 +219,73 @@ static void destroy_fm_dev(struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev)
kfree(p_lnx_wrp_fm_dev);
}
+static int fill_rest_fm_info(struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev)
+{
+#define FM_BMI_PPIDS_OFFSET 0x00080304
+#define FM_DMA_PLR_OFFSET 0x000c2060
+#define FM_FPM_IP_REV_1_OFFSET 0x000c30c4
+#define DMA_HIGH_LIODN_MASK 0x0FFF0000
+#define DMA_LOW_LIODN_MASK 0x00000FFF
+#define DMA_LIODN_SHIFT 16
+
+/* These need to be moved to FLib: */
+ struct plr_t {
+ uint32_t plr[32];
+ } __attribute__((__packed__));
+
+ struct ppids_t {
+ volatile uint32_t fmbm_ppid[63];
+ } __attribute__((__packed__));
+
+ struct plr_t *p_plr;
+ struct ppids_t *p_ppids;
+ int i;
+ uint32_t fm_rev;
+
+ fm_rev = (uint32_t)(*((volatile uint32_t *)
+ UINT_TO_PTR(p_lnx_wrp_fm_dev->fm_base_addr +
+ FM_FPM_IP_REV_1_OFFSET)));
+ fm_rev &= 0xffff;
+
+ p_plr =
+ (struct plr_t *)UINT_TO_PTR(p_lnx_wrp_fm_dev->fm_base_addr +
+ FM_DMA_PLR_OFFSET);
+#ifdef MODULE
+ for (i = 0; i < FM_MAX_NUM_OF_PARTITIONS / 2; i++)
+ p_plr->plr[i] = 0;
+#endif /* MODULE */
+
+ for (i = 0; i < FM_MAX_NUM_OF_PARTITIONS; i++) {
+ uint16_t liodn_base;
+
+ liodn_base = (uint16_t)((i % 2) ?
+ (p_plr->plr[i / 2] & DMA_LOW_LIODN_MASK) :
+ ((p_plr->plr[i / 2] & DMA_HIGH_LIODN_MASK) >>
+ DMA_LIODN_SHIFT));
+#ifdef FM_PARTITION_ARRAY
+ p_lnx_wrp_fm_dev->params.liodn_base_per_port[i] = liodn_base;
+#endif /* FM_PARTITION_ARRAY */
+
+ if (((i >= FIRST_RX_PORT) && (i <= LAST_RX_PORT)) ||
+ ((i >= FIRST_TX_PORT) && (i <= FIRST_TX_PORT)) ||
+ ((i >= FIRST_OP_PORT(
+ p_lnx_wrp_fm_dev->fm_rev_info.major_rev)) &&
+ (i <= LAST_OP_PORT)))
+ p_lnx_wrp_fm_dev->ports[i].port_params.liodn_base =
+ liodn_base;
+ }
+
+ p_ppids = (struct ppids_t *)
+ UINT_TO_PTR(p_lnx_wrp_fm_dev->fm_base_addr +
+ FM_BMI_PPIDS_OFFSET);
+
+ for (i = FIRST_RX_PORT; i <= LAST_RX_PORT; i++)
+ p_lnx_wrp_fm_dev->ports[i].port_params.specific_params.
+ rx_params.liodn_offset = (u16)(p_ppids->fmbm_ppid[i - 1]);
+
+ return 0;
+}
+
/**
*find_fman_microcode - find the Fman microcode
*
@@ -562,7 +629,7 @@ static int configure_fm_dev(struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev)
p_lnx_wrp_fm_dev->params.f_bus_error = lnxwrp_fm_dev_bus_error_cb;
p_lnx_wrp_fm_dev->params.h_app = p_lnx_wrp_fm_dev;
- return 0;
+ return fill_rest_fm_info(p_lnx_wrp_fm_dev);
}
static int init_fm_dev(struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev)
@@ -820,6 +887,56 @@ void *fm_get_handle(struct fm *fm)
EXPORT_SYMBOL(fm_get_handle);
+struct fm_port *fm_port_bind(struct device *fm_port_dev)
+{
+ return (struct fm_port *)(dev_get_drvdata(get_device(fm_port_dev)));
+}
+EXPORT_SYMBOL(fm_port_bind);
+
+void fm_port_unbind(struct fm_port *port)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+
+ put_device(p_lnx_wrp_fm_port_dev->dev);
+}
+EXPORT_SYMBOL(fm_port_unbind);
+
+void *fm_port_get_handle(const struct fm_port *port)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+
+ return (void *)p_lnx_wrp_fm_port_dev->h_dev;
+}
+EXPORT_SYMBOL(fm_port_get_handle);
+
+void fm_port_get_base_addr(const struct fm_port *port, uint64_t *base_addr)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+
+ *base_addr = p_lnx_wrp_fm_port_dev->port_params.base_addr;
+}
+EXPORT_SYMBOL(fm_port_get_base_addr);
+
+void fm_port_get_buff_layout_ext_params(struct fm_port *port,
+ struct fm_port_params *params)
+{
+ /* TODO - Should this function be removed? */
+ params->data_align = 0;
+}
+EXPORT_SYMBOL(fm_port_get_buff_layout_ext_params);
+
+int fm_get_tx_port_channel(struct fm_port *port)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+
+ return p_lnx_wrp_fm_port_dev->tx_ch;
+}
+EXPORT_SYMBOL(fm_get_tx_port_channel);
+
void fm_mutex_lock(void)
{
mutex_lock(&lnxwrp_mutex);
diff --git a/drivers/net/ethernet/freescale/fman/fm_drv.h b/drivers/net/ethernet/freescale/fman/fm_drv.h
index de69965..f2a9885 100644
--- a/drivers/net/ethernet/freescale/fman/fm_drv.h
+++ b/drivers/net/ethernet/freescale/fman/fm_drv.h
@@ -35,6 +35,7 @@
#include "service.h"
#include "fsl_fman_drv.h"
+#include "fm_port_ext.h"
#ifndef CONFIG_FSL_FM_MAX_FRAME_SIZE
#define CONFIG_FSL_FM_MAX_FRAME_SIZE 0
@@ -68,6 +69,7 @@ struct lnx_wrp_fm_port_dev_t {
uint64_t phys_base_addr;
uint64_t base_addr; /* Port's *virtual* address */
resource_size_t mem_size;
+ struct fm_port_params_t port_params;
struct fm_buffer_prefix_content_t buff_prefix_content;
void *h_dev;
void *h_lnx_wrp_fm_dev;
diff --git a/drivers/net/ethernet/freescale/fman/fm_port_drv.c b/drivers/net/ethernet/freescale/fman/fm_port_drv.c
new file mode 100644
index 0000000..110403d
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/fm_port_drv.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*File lnxwrp_fm_port.c
+ *Description FMD wrapper - FMan port functions.
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/cdev.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "fm_common.h"
+#include "fsl_fman_drv.h"
+#include "fm_port_ext.h"
+#include "fm_drv.h"
+
+static struct lnx_wrp_fm_port_dev_t
+*read_fm_port_dev_tree_node(struct platform_device *of_dev)
+{
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev;
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev;
+ struct device_node *fm_node, *port_node;
+ struct resource res;
+ const uint32_t *uint32_prop;
+ int _errno = 0, lenp;
+ enum fm_port_type port_type;
+ enum fm_port_speed port_speed;
+ u8 cell_index;
+
+ port_node = of_node_get(of_dev->dev.of_node);
+
+ /* Get the FM node */
+ fm_node = of_get_parent(port_node);
+ if (unlikely(!fm_node)) {
+ pr_err("of_get_parent() = %d\n", _errno);
+ return NULL;
+ }
+
+ p_lnx_wrp_fm_dev = dev_get_drvdata(&of_find_device_by_node(fm_node)->
+ dev);
+ of_node_put(fm_node);
+
+ /* if fm_probe() failed, no point in going further with port probing */
+ if (!p_lnx_wrp_fm_dev)
+ return NULL;
+
+ uint32_prop =
+ (uint32_t *)of_get_property(port_node, "cell-index", &lenp);
+ if (unlikely(!uint32_prop)) {
+ pr_err("of_get_property(%s, cell-index) failed\n",
+ port_node->full_name);
+ return NULL;
+ }
+ if (WARN_ON(lenp != sizeof(uint32_t)))
+ return NULL;
+ cell_index = (u8)*uint32_prop;
+
+ p_lnx_wrp_fm_port_dev = &p_lnx_wrp_fm_dev->ports[cell_index];
+ p_lnx_wrp_fm_port_dev->id = cell_index;
+ p_lnx_wrp_fm_port_dev->port_params.port_id =
+ p_lnx_wrp_fm_port_dev->id;
+
+ if (of_device_is_compatible(port_node, "fsl,fman-v2-port-oh") ||
+ of_device_is_compatible(port_node, "fsl,fman-v3-port-oh")) {
+ port_type = FM_PORT_TYPE_OP;
+ port_speed = FM_PORT_SPEED_OP;
+
+ } else if (of_device_is_compatible(port_node,
+ "fsl,fman-v3-port-tx") ||
+ of_device_is_compatible(port_node,
+ "fsl,fman-v2-port-tx")) {
+ if (cell_index >= TX_10G_PORT_BASE)
+ port_speed = FM_PORT_SPEED_10G;
+ else
+ port_speed = FM_PORT_SPEED_1G;
+ port_type = FM_PORT_TYPE_TX;
+
+ } else if (of_device_is_compatible(port_node,
+ "fsl,fman-v3-port-rx") ||
+ of_device_is_compatible(port_node,
+ "fsl,fman-v2-port-rx")) {
+ if (cell_index >= RX_10G_PORT_BASE)
+ port_speed = FM_PORT_SPEED_10G;
+ else
+ port_speed = FM_PORT_SPEED_1G;
+ port_type = FM_PORT_TYPE_RX;
+ } else {
+ pr_err("Illegal port type\n");
+ return NULL;
+ }
+
+ p_lnx_wrp_fm_port_dev->port_params.port_type = port_type;
+ p_lnx_wrp_fm_port_dev->port_params.port_speed = port_speed;
+
+ if (port_type == FM_PORT_TYPE_OP || port_type == FM_PORT_TYPE_TX) {
+ uint32_t qman_channel_id;
+
+ qman_channel_id = get_qman_channel_id(p_lnx_wrp_fm_dev,
+ cell_index,
+ port_type,
+ port_speed);
+
+ if (qman_channel_id == 0) {
+ pr_err("incorrect qman-channel-id\n");
+ return NULL;
+ }
+ p_lnx_wrp_fm_port_dev->tx_ch = qman_channel_id;
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.
+ non_rx_params.qm_channel = qman_channel_id;
+ }
+
+ _errno = of_address_to_resource(port_node, 0, &res);
+ if (unlikely(_errno < 0)) {
+ pr_err("of_address_to_resource() = %d\n", _errno);
+ return NULL;
+ }
+
+ p_lnx_wrp_fm_port_dev->dev = &of_dev->dev;
+ p_lnx_wrp_fm_port_dev->base_addr = 0;
+ p_lnx_wrp_fm_port_dev->phys_base_addr = res.start;
+ p_lnx_wrp_fm_port_dev->mem_size = res.end + 1 - res.start;
+ p_lnx_wrp_fm_port_dev->port_params.h_fm = p_lnx_wrp_fm_dev->h_dev;
+ p_lnx_wrp_fm_port_dev->h_lnx_wrp_fm_dev = (void *)p_lnx_wrp_fm_dev;
+
+ of_node_put(port_node);
+
+ p_lnx_wrp_fm_port_dev->active = true;
+
+ return p_lnx_wrp_fm_port_dev;
+}
+
+static int configure_fm_port_dev(struct lnx_wrp_fm_port_dev_t
+ *p_lnx_wrp_fm_port_dev)
+{
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev =
+ (struct lnx_wrp_fm_dev_t *)p_lnx_wrp_fm_port_dev->h_lnx_wrp_fm_dev;
+ struct resource *dev_res;
+
+ if (!p_lnx_wrp_fm_port_dev->active) {
+ pr_err("FM port not configured!!!\n");
+ return -ENOSYS;
+ }
+
+ dev_res =
+ __devm_request_region(p_lnx_wrp_fm_dev->dev, p_lnx_wrp_fm_dev->res,
+ p_lnx_wrp_fm_port_dev->phys_base_addr,
+ p_lnx_wrp_fm_port_dev->mem_size,
+ "fman-port-hc");
+ if (unlikely(!dev_res)) {
+ pr_err("__devm_request_region() failed\n");
+ return -ENOSYS;
+ }
+ p_lnx_wrp_fm_port_dev->base_addr =
+ PTR_TO_UINT(devm_ioremap
+ (p_lnx_wrp_fm_dev->dev,
+ p_lnx_wrp_fm_port_dev->phys_base_addr,
+ p_lnx_wrp_fm_port_dev->mem_size));
+ if (unlikely(p_lnx_wrp_fm_port_dev->base_addr == 0))
+ pr_err("devm_ioremap() failed\n");
+
+ p_lnx_wrp_fm_port_dev->port_params.base_addr =
+ p_lnx_wrp_fm_port_dev->base_addr;
+
+ return 0;
+}
+
+static int init_fm_port_dev(struct lnx_wrp_fm_port_dev_t
+ *p_lnx_wrp_fm_port_dev)
+{
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev =
+ (struct lnx_wrp_fm_dev_t *)p_lnx_wrp_fm_port_dev->
+ h_lnx_wrp_fm_dev;
+
+ if (!p_lnx_wrp_fm_port_dev->active || p_lnx_wrp_fm_port_dev->h_dev)
+ return -ENOSYS;
+
+ p_lnx_wrp_fm_port_dev->h_dev =
+ fm_port_config(&p_lnx_wrp_fm_port_dev->port_params);
+ if (!p_lnx_wrp_fm_port_dev->h_dev) {
+ pr_err("FM-port\n");
+ return -ENOSYS;
+ }
+
+ if (fm_get_revision(p_lnx_wrp_fm_dev->h_dev,
+ &p_lnx_wrp_fm_port_dev->fm_rev_info) != 0) {
+ pr_err("FM-port\n");
+ return -ENOSYS;
+ }
+
+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
+ if ((p_lnx_wrp_fm_port_dev->fm_rev_info.major_rev != 4) &&
+ (p_lnx_wrp_fm_port_dev->port_params.port_type ==
+ FM_PORT_TYPE_TX)) {
+ int err_code = 0;
+
+ err_code =
+ fm_port_cfg_deq_high_priority(p_lnx_wrp_fm_port_dev->
+ h_dev, true);
+ if (err_code != 0)
+ return -err_code;
+ err_code =
+ fm_port_cfg_deq_prefetch_option
+ (p_lnx_wrp_fm_port_dev->h_dev, FM_PORT_DEQ_FULL_PREFETCH);
+ if (err_code != 0)
+ return -err_code;
+ }
+#endif /* !FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
+
+#ifdef FM_BCB_ERRATA_BMI_SW001
+/* Configure BCB workaround on Rx ports, only for B4860 rev1 */
+#define SVR_SECURITY_MASK 0x00080000
+#define SVR_PERSONALITY_MASK 0x0000FF00
+#define SVR_VER_IGNORE_MASK (SVR_SECURITY_MASK | SVR_PERSONALITY_MASK)
+#define SVR_B4860_REV1_VALUE 0x86800010
+
+ if ((p_lnx_wrp_fm_port_dev->fm_rev_info.major_rev >= 6) &&
+ (p_lnx_wrp_fm_port_dev->port_params.port_type ==
+ FM_PORT_TYPE_RX)){
+ unsigned int svr;
+
+ svr = mfspr(SPRN_SVR);
+
+ if ((svr & ~SVR_VER_IGNORE_MASK) == SVR_B4860_REV1_VALUE)
+ fm_port_cfg_bcb_wa(p_lnx_wrp_fm_port_dev->h_dev);
+ }
+#endif /* FM_BCB_ERRATA_BMI_SW001 */
+
+ fm_port_cfg_buf_prefix_content(p_lnx_wrp_fm_port_dev->h_dev,
+ &p_lnx_wrp_fm_port_dev->
+ buff_prefix_content);
+
+ if (fm_port_init(p_lnx_wrp_fm_port_dev->h_dev) != 0)
+ return -ENOSYS;
+
+/**
+ * FMan Fifo sizes behind the scene":
+ * Using the following formulae (*), under a set of simplifying assumptions (.):
+ * . all ports are configured in Normal Mode (rather than Independent Mode)
+ * . the DPAA Eth driver allocates buffers of size:
+ * . MAXFRM + NET_IP_ALIGN + DPA_PRIV_DATA_SIZE + DPA_PARSE_RESULTS_SIZE
+ * + DPA_HASH_RESULTS_SIZE, i.e.:
+ * MAXFRM + 2 + 16 + sizeof(fm_prs_result_t) + 16, i.e.:
+ * MAXFRM + 66
+ * . excessive buffer pools not accounted for
+ *
+ **for Rx ports on P4080:
+ * . IFSZ = ceil(max(FMBM_EBMPI[PBS]) / 256)*256 + 7*256
+ * . no internal frame offset (FMBM_RIM[FOF] == 0) - otherwise,
+ * add up to 256 to the above
+ *
+ **for Rx ports on P1023:
+ * . IFSZ = ceil(second_largest(FMBM_EBMPI[PBS] / 256))*256 + 7*256,
+ * if at least 2 bpools are configured
+ * . IFSZ = 8*256, if only a single bpool is configured
+ *
+ **for Tx ports:
+ * . IFSZ = ceil(frame_size / 256)*256 + 3*256
+ * + FMBM_TFP[DPDE]*256, i.e.:
+ * IFSZ = ceil(MAXFRM / 256)*256 + 3 x 256 + FMBM_TFP[DPDE]*256
+ *
+ **for OH ports on P4080:
+ * . IFSZ = ceil(frame_size / 256)*256 + 1*256 + FMBM_PP[MXT]*256
+ **for OH ports on P1023:
+ * . IFSZ = ceil(frame_size / 256)*256 + 3*256 + FMBM_TFP[DPDE]*256
+ **for both P4080 and P1023:
+ * . (conservative decisions, assuming that BMI must bring the entire
+ * frame, not only the frame header)
+ * . no internal frame offset (FMBM_OIM[FOF] == 0) - otherwise,
+ * add up to 256 to the above
+ *
+ * . for P4080/P5020/P3041/P2040, DPDE is:
+ * > 0 or 1, for 1Gb ports, HW default: 0
+ * > 2..7 (recommended: 3..7) for 10Gb ports, HW default: 3
+ * . for P1023, DPDE should be 1
+ *
+ * . for P1023, MXT is in range (0..31)
+ * . for P4080, MXT is in range (0..63)
+ *
+ */
+ return 0;
+}
+
+void fm_set_rx_port_params(struct fm_port *port, struct fm_port_params *params)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+ int i;
+
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.
+ rx_params.err_fqid = params->errq;
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.rx_params.
+ dflt_fqid = params->defq;
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.rx_params.
+ ext_buf_pools.num_of_pools_used = params->num_pools;
+ for (i = 0; i < params->num_pools; i++) {
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.
+ rx_params.ext_buf_pools.ext_buf_pool[i].id =
+ params->pool_param[i].id;
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.
+ rx_params.ext_buf_pools.ext_buf_pool[i].size =
+ params->pool_param[i].size;
+ }
+
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.priv_data_size =
+ params->priv_data_size;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_prs_result =
+ params->parse_results;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_hash_result =
+ params->hash_results;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_time_stamp =
+ params->time_stamp;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.data_align =
+ params->data_align;
+
+ init_fm_port_dev(p_lnx_wrp_fm_port_dev);
+}
+EXPORT_SYMBOL(fm_set_rx_port_params);
+
+/* this function is called from oh_probe as well, thus it contains oh port
+ * specific parameters (make sure everything is checked)
+ **/
+void fm_set_tx_port_params(struct fm_port *port, struct fm_port_params *params)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev =
+ (struct lnx_wrp_fm_port_dev_t *)port;
+
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.non_rx_params.
+ err_fqid = params->errq;
+ p_lnx_wrp_fm_port_dev->port_params.specific_params.non_rx_params.
+ dflt_fqid = params->defq;
+
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.priv_data_size =
+ params->priv_data_size;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_prs_result =
+ params->parse_results;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_hash_result =
+ params->hash_results;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.pass_time_stamp =
+ params->time_stamp;
+ p_lnx_wrp_fm_port_dev->buff_prefix_content.data_align =
+ params->data_align;
+
+ init_fm_port_dev(p_lnx_wrp_fm_port_dev);
+}
+EXPORT_SYMBOL(fm_set_tx_port_params);
+
+static void free_fm_port_dev(struct lnx_wrp_fm_port_dev_t
+ *p_lnx_wrp_fm_port_dev)
+{
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev =
+ (struct lnx_wrp_fm_dev_t *)p_lnx_wrp_fm_port_dev->h_lnx_wrp_fm_dev;
+
+ if (!p_lnx_wrp_fm_port_dev->active)
+ return;
+
+ if (p_lnx_wrp_fm_port_dev->h_dev)
+ fm_port_free((struct fm_port *)p_lnx_wrp_fm_port_dev);
+
+ devm_iounmap(p_lnx_wrp_fm_dev->dev,
+ UINT_TO_PTR(p_lnx_wrp_fm_port_dev->base_addr));
+ __devm_release_region(p_lnx_wrp_fm_dev->dev, p_lnx_wrp_fm_dev->res,
+ p_lnx_wrp_fm_port_dev->phys_base_addr,
+ p_lnx_wrp_fm_port_dev->mem_size);
+}
+
+static int /*__devinit*/ fm_port_probe(struct platform_device *of_dev)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev;
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev;
+ struct device *dev;
+
+ dev = &of_dev->dev;
+
+ p_lnx_wrp_fm_port_dev = read_fm_port_dev_tree_node(of_dev);
+ if (!p_lnx_wrp_fm_port_dev)
+ return -EIO;
+ /* Port can be inactive, thus will not be probed:
+ * - in performance mode, OH ports are disabled ...
+ **/
+ if (!p_lnx_wrp_fm_port_dev->active)
+ return 0;
+
+ if (configure_fm_port_dev(p_lnx_wrp_fm_port_dev) != 0)
+ return -EIO;
+
+ dev_set_drvdata(dev, p_lnx_wrp_fm_port_dev);
+
+ p_lnx_wrp_fm_dev = (struct lnx_wrp_fm_dev_t *)p_lnx_wrp_fm_port_dev->
+ h_lnx_wrp_fm_dev;
+
+ if (p_lnx_wrp_fm_port_dev->port_params.port_type ==
+ FM_PORT_TYPE_RX) {
+ snprintf(p_lnx_wrp_fm_port_dev->name,
+ sizeof(p_lnx_wrp_fm_port_dev->name),
+ "%s-port-rx%d",
+ p_lnx_wrp_fm_dev->name, p_lnx_wrp_fm_port_dev->id);
+ } else if (p_lnx_wrp_fm_port_dev->port_params.port_type ==
+ FM_PORT_TYPE_TX) {
+ snprintf(p_lnx_wrp_fm_port_dev->name,
+ sizeof(p_lnx_wrp_fm_port_dev->name),
+ "%s-port-tx%d",
+ p_lnx_wrp_fm_dev->name, p_lnx_wrp_fm_port_dev->id);
+ } else if (p_lnx_wrp_fm_port_dev->port_params.port_type ==
+ FM_PORT_TYPE_OP) {
+ snprintf(p_lnx_wrp_fm_port_dev->name,
+ sizeof(p_lnx_wrp_fm_port_dev->name),
+ "%s-port-oh%d",
+ p_lnx_wrp_fm_dev->name, p_lnx_wrp_fm_port_dev->id + 1);
+ }
+#ifdef FM_TX_INVALID_ECC_ERRATA_10GMAC_A009
+ if (p_lnx_wrp_fm_port_dev->fm_rev_info.major_rev < 6 &&
+ p_lnx_wrp_fm_port_dev->fm_rev_info.major_rev != 4)
+ fm_disable_rams_ecc(p_lnx_wrp_fm_dev->h_dev);
+#endif /* FM_TX_INVALID_ECC_ERRATA_10GMAC_A009 */
+
+ pr_debug("%s probed\n", p_lnx_wrp_fm_port_dev->name);
+
+ return 0;
+}
+
+static int fm_port_remove(struct platform_device *of_dev)
+{
+ struct lnx_wrp_fm_port_dev_t *p_lnx_wrp_fm_port_dev;
+ struct lnx_wrp_fm_dev_t *p_lnx_wrp_fm_dev;
+ struct device *dev;
+
+ dev = &of_dev->dev;
+ p_lnx_wrp_fm_port_dev = dev_get_drvdata(dev);
+
+ p_lnx_wrp_fm_dev = (struct lnx_wrp_fm_dev_t *)p_lnx_wrp_fm_port_dev->
+ h_lnx_wrp_fm_dev;
+
+ free_fm_port_dev(p_lnx_wrp_fm_port_dev);
+
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id fm_port_match[] = {
+ {
+ .compatible = "fsl,fman-v3-port-oh"},
+ {
+ .compatible = "fsl,fman-v2-port-oh"},
+ {
+ .compatible = "fsl,fman-v3-port-rx"},
+ {
+ .compatible = "fsl,fman-v2-port-rx"},
+ {
+ .compatible = "fsl,fman-v3-port-tx"},
+ {
+ .compatible = "fsl,fman-v2-port-tx"},
+ {}
+};
+
+#ifndef MODULE
+MODULE_DEVICE_TABLE(of, fm_port_match);
+#endif /* !MODULE */
+
+static struct platform_driver fm_port_driver = {
+ .driver = {
+ .name = "fsl-fman-port",
+ .of_match_table = fm_port_match,
+ .owner = THIS_MODULE,
+ },
+ .probe = fm_port_probe,
+ .remove = fm_port_remove
+};
+
+int lnxwrp_fm_port_init(void)
+{
+ /* Register to the DTB for basic FM port API */
+ if (platform_driver_register(&fm_port_driver))
+ return -ENODEV;
+
+ return 0;
+}
+
+void lnxwrp_fm_port_free(void)
+{
+ platform_driver_unregister(&fm_port_driver);
+}
+
+static int __init __cold fm_port_load(void)
+{
+ if (lnxwrp_fm_port_init() != 0) {
+ pr_crit("Failed to init FM Ports wrapper!\n");
+ return -ENODEV;
+ }
+
+ pr_info("Freescale FM Ports module\n");
+
+ return 0;
+}
+
+static void __exit __cold fm_port_unload(void)
+{
+ lnxwrp_fm_port_free();
+}
+
+module_init(fm_port_load);
+module_exit(fm_port_unload);
diff --git a/drivers/net/ethernet/freescale/fman/inc/fm_ext.h b/drivers/net/ethernet/freescale/fman/inc/fm_ext.h
index 33e3000..92d3eaf 100644
--- a/drivers/net/ethernet/freescale/fman/inc/fm_ext.h
+++ b/drivers/net/ethernet/freescale/fman/inc/fm_ext.h
@@ -58,6 +58,64 @@ enum fm_port_speed {
#define FM_MAX_NUM_OF_PARTITIONS 64 /* Maximum number of partitions */
#define FM_PHYS_ADDRESS_SIZE 6 /* FM Physical address size */
+/* FM Frame descriptor macros */
+/* Frame queue Context Override */
+#define FM_FD_CMD_FCO 0x80000000
+#define FM_FD_CMD_RPD 0x40000000 /* Read Prepended Data */
+/* Update Prepended Data */
+#define FM_FD_CMD_UPD 0x20000000
+#define FM_FD_CMD_DTC 0x10000000 /* Do L4 Checksum */
+/* Didn't calculate L4 Checksum */
+#define FM_FD_CMD_DCL4C 0x10000000
+/* Confirmation Frame Queue */
+#define FM_FD_CMD_CFQ 0x00ffffff
+
+/* Not for Rx-Port! Unsupported Format */
+#define FM_FD_ERR_UNSUPPORTED_FORMAT 0x04000000
+/* Not for Rx-Port! Length Error */
+#define FM_FD_ERR_LENGTH 0x02000000
+#define FM_FD_ERR_DMA 0x01000000 /* DMA Data error */
+
+/* IPR frame (not error) */
+#define FM_FD_IPR 0x00000001
+/* IPR non-consistent-sp */
+#define FM_FD_ERR_IPR_NCSP (0x00100000 | FM_FD_IPR)
+/* IPR error */
+#define FM_FD_ERR_IPR (0x00200000 | FM_FD_IPR)
+/* IPR timeout */
+#define FM_FD_ERR_IPR_TO (0x00300000 | FM_FD_IPR)
+
+/* Rx FIFO overflow, FCS error, code error, running disparity error
+ * (SGMII and TBI modes), FIFO parity error. PHY Sequence error,
+ * PHY error control character detected.
+ */
+#define FM_FD_ERR_PHYSICAL 0x00080000
+/* Frame too long OR Frame size exceeds max_length_frame */
+#define FM_FD_ERR_SIZE 0x00040000
+/* classification discard */
+#define FM_FD_ERR_CLS_DISCARD 0x00020000
+/* Extract Out of Frame */
+#define FM_FD_ERR_EXTRACTION 0x00008000
+/* No Scheme Selected */
+#define FM_FD_ERR_NO_SCHEME 0x00004000
+/* Keysize Overflow */
+#define FM_FD_ERR_KEYSIZE_OVERFLOW 0x00002000
+/* Frame color is red */
+#define FM_FD_ERR_COLOR_RED 0x00000800
+/* Frame color is yellow */
+#define FM_FD_ERR_COLOR_YELLOW 0x00000400
+/* Parser Time out Exceed */
+#define FM_FD_ERR_PRS_TIMEOUT 0x00000080
+/* Invalid Soft Parser instruction */
+#define FM_FD_ERR_PRS_ILL_INSTRUCT 0x00000040
+/* Header error was identified during parsing */
+#define FM_FD_ERR_PRS_HDR_ERR 0x00000020
+/* Frame parsed beyind 256 first bytes */
+#define FM_FD_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008
+
+/* non Frame-Manager error */
+#define FM_FD_RX_STATUS_ERR_NON_FM 0x00400000
+
/* FM physical Address */
struct fm_phys_addr_t {
uint8_t high; /* High part of the physical address */
diff --git a/drivers/net/ethernet/freescale/fman/inc/fm_port_ext.h b/drivers/net/ethernet/freescale/fman/inc/fm_port_ext.h
new file mode 100644
index 0000000..124f314
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/inc/fm_port_ext.h
@@ -0,0 +1,397 @@
+/*
+ * Copyright 2008-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*File fm_port_ext.h
+ *FM-Port Application Programming Interface.
+ */
+#ifndef __FM_PORT_EXT
+#define __FM_PORT_EXT
+
+#include "service.h"
+#include "fm_ext.h"
+#include "net_ext.h"
+
+/* FM Port API
+ * The FM uses a general module called "port" to represent a Tx port (MAC),
+ * an Rx port (MAC) or Offline Parsing port.
+ * The number of ports in an FM varies between SOCs.
+ * The SW driver manages these ports as sub-modules of the FM,i.e. after an
+ * FM is initialized, its ports may be initialized and operated upon.
+ * The port is initialized aware of its type, but other functions on a port
+ * may be indifferent to its type. When necessary, the driver verifies
+ * coherence and returns error if applicable.
+ * On initialization, user specifies the port type and it's index (relative
+ * to the port's type) - always starting at 0.
+ */
+
+/* Port interrupts */
+enum fm_port_exceptions {
+ FM_PORT_EXCEPTION_IM_BUSY /* Independent-Mode Rx-BUSY */
+};
+
+/* General FM Port defines */
+/* Number of 4 bytes words in parser result */
+#define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8
+/* @} */
+
+/* FM Frame error */
+/* Frame Descriptor errors */
+/* Not for Rx-Port! Unsupported Format */
+#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT
+/* Not for Rx-Port! Length Error */
+#define FM_PORT_FRM_ERR_LENGTH FM_FD_ERR_LENGTH
+/* DMA Data error */
+#define FM_PORT_FRM_ERR_DMA FM_FD_ERR_DMA
+/* non Frame-Manager error; probably come from SEC that was chained to FM */
+#define FM_PORT_FRM_ERR_NON_FM FM_FD_RX_STATUS_ERR_NON_FM
+ /* IPR error */
+#define FM_PORT_FRM_ERR_IPRE (FM_FD_ERR_IPR & ~FM_FD_IPR)
+/* IPR non-consistent-sp */
+#define FM_PORT_FRM_ERR_IPR_NCSP (FM_FD_ERR_IPR_NCSP & \
+ ~FM_FD_IPR)
+
+/* Obsolete; will be removed in the future */
+#define FM_PORT_FRM_ERR_IPFE 0
+
+/* Rx FIFO overflow, FCS error, code error, running disparity
+ * error (SGMII and TBI modes), FIFO parity error.
+ * PHY Sequence error, PHY error control character detected.
+ **/
+#define FM_PORT_FRM_ERR_PHYSICAL FM_FD_ERR_PHYSICAL
+/* Frame too long OR Frame size exceeds max_length_frame */
+#define FM_PORT_FRM_ERR_SIZE FM_FD_ERR_SIZE
+/* indicates a classifier "drop" operation */
+#define FM_PORT_FRM_ERR_CLS_DISCARD FM_FD_ERR_CLS_DISCARD
+/* Extract Out of Frame */
+#define FM_PORT_FRM_ERR_EXTRACTION FM_FD_ERR_EXTRACTION
+/* No Scheme Selected */
+#define FM_PORT_FRM_ERR_NO_SCHEME FM_FD_ERR_NO_SCHEME
+/* Keysize Overflow */
+#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW
+/* Frame color is red */
+#define FM_PORT_FRM_ERR_COLOR_RED FM_FD_ERR_COLOR_RED
+/* Frame color is yellow */
+#define FM_PORT_FRM_ERR_COLOR_YELLOW FM_FD_ERR_COLOR_YELLOW
+/* Parser Time out Exceed */
+#define FM_PORT_FRM_ERR_PRS_TIMEOUT FM_FD_ERR_PRS_TIMEOUT
+/* Invalid Soft Parser instruction */
+#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT
+/* Header error was identified during parsing */
+#define FM_PORT_FRM_ERR_PRS_HDR_ERR FM_FD_ERR_PRS_HDR_ERR
+/* Frame parsed beyind 256 first bytes */
+#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED FM_FD_ERR_BLOCK_LIMIT_EXCEEDED
+/* FPM Frame Processing Timeout Exceeded */
+#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001
+
+/* FM Port Initialization Unit */
+
+/*Description Exceptions user callback routine, will be called upon an
+ * exception passing the exception identification.
+ * Param[in] h_app - User's application descriptor.
+ * Param[in] exception - The exception.
+ */
+typedef void (fm_port_exception_cb) (void *h_app,
+ enum fm_port_exceptions exception);
+
+/* A structure for additional Rx port parameters */
+struct fm_port_rx_params_t {
+ uint32_t err_fqid; /* Error Queue Id. */
+ uint32_t dflt_fqid; /* Default Queue Id. */
+ uint16_t liodn_offset; /* Port's LIODN offset. */
+ /* Which external buffer pools are used
+ * (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes.
+ */
+ struct fm_ext_pools_t ext_buf_pools;
+};
+
+/* A structure for additional non-Rx port parameters*/
+struct fm_port_non_rx_params_t {
+ /* Error Queue Id. */
+ uint32_t err_fqid;
+ /* For Tx - Default Confirmation queue, 0 means no Tx confirmation
+ * for processed frames. For OP port - default Rx queue.
+ */
+ uint32_t dflt_fqid;
+ /* QM-channel dedicated to this port; will be used
+ * by the FM for dequeue.
+ */
+ uint32_t qm_channel;
+};
+
+/* A union for additional parameters depending on port type*/
+union fm_port_specific_params_u {
+ /* Rx port parameters structure */
+ struct fm_port_rx_params_t rx_params;
+ /* Non-Rx port parameters structure */
+ struct fm_port_non_rx_params_t non_rx_params;
+};
+
+/* A structure representing FM initialization parameters*/
+struct fm_port_params_t {
+ uintptr_t base_addr;
+ /* Virtual Address of memory mapped FM Port registers.*/
+ void *h_fm;
+ /* A handle to the FM object this port related to */
+ enum fm_port_type port_type;
+ /* Port type */
+ enum fm_port_speed port_speed;
+ /* Port speed */
+ uint8_t port_id;
+ /* Port Id - relative to type;
+ * NOTE: When configuring Offline Parsing port for FMANv3 devices,
+ * it is highly recommended NOT to use port_id=0 due to lack of HW
+ * resources on port_id=0.
+ */
+ uint16_t liodn_base;
+ /* Irrelevant for P4080 rev 1. LIODN base for this port, to be
+ * used together with LIODN offset.
+ */
+ union fm_port_specific_params_u specific_params;
+ /* Additional parameters depending on port type. */
+ fm_port_exception_cb *f_exception;
+ /* Relevant for IM only Callback routine to be called on
+ * BUSY exception.
+ */
+ void *h_app;
+ /* A handle to an application layer object; This handle will be
+ * passed by the driver upon calling the above callbacks
+ */
+};
+
+struct fm_port;
+
+/*Function fm_port_config
+ *Description Creates a descriptor for the FM PORT module.
+ * The routine returns a handle (descriptor) to the FM PORT object.
+ * This descriptor must be passed as first parameter to all other
+ * FM PORT function calls.
+ * No actual initialization or configuration of FM hardware is
+ * done by this routine.
+ * Param[in] p_fm_port_params - Pointer to data structure of parameters
+ * Retval Handle to FM object, or NULL for Failure.
+ */
+void *fm_port_config(struct fm_port_params_t *p_fm_port_params);
+
+/*Function fm_port_init
+ *Description Initializes the FM PORT module by defining the
+ * software structure
+ * and configuring the hardware registers.
+ * Param[in] h_fm_port - FM PORT module descriptor
+ *Return 0 on success; Error code otherwise.
+ */
+int fm_port_init(void *h_fm_port);
+
+/*Function fm_port_free
+ *Description Frees all resources that were assigned to FM PORT module.
+ * Calling this routine invalidates the descriptor.
+ * Param[in] h_fm_port - FM PORT module descriptor
+ *Return 0 on success; Error code otherwise.
+ */
+int fm_port_free(struct fm_port *port);
+
+/* Configuration functions used to change default values. */
+
+/* enum for defining QM frame dequeue*/
+enum fm_port_deq_type {
+ /* Dequeue from the SP channel - with priority precedence,
+ * and Intra-Class Scheduling respected.
+ */
+ FM_PORT_DEQ_TYPE1,
+ /* Dequeue from the SP channel - with active FQ precedence,
+ * and Intra-Class Scheduling respected.
+ */
+ FM_PORT_DEQ_TYPE2,
+ /* Dequeue from the SP channel - with active FQ precedence,
+ * and override Intra-Class Scheduling
+ */
+ FM_PORT_DEQ_TYPE3
+};
+
+/* enum for defining QM frame dequeue*/
+enum fm_port_deq_prefetch_option {
+ /* QMI preforms a dequeue action for a single frame only
+ * when a dedicated portID Tnum is waiting.
+ */
+ FM_PORT_DEQ_NO_PREFETCH,
+ /* QMI preforms a dequeue action for 3 frames when one
+ * dedicated port_id tnum is waiting.
+ */
+ FM_PORT_DEQ_PARTIAL_PREFETCH,
+ /* QMI preforms a dequeue action for 3 frames when
+ * no dedicated port_id tnums are waiting.
+ */
+ FM_PORT_DEQ_FULL_PREFETCH
+};
+
+/* enum for defining port default color*/
+enum fm_port_color {
+ FM_PORT_COLOR_GREEN, /* Default port color is green */
+ FM_PORT_COLOR_YELLOW, /* Default port color is yellow */
+ FM_PORT_COLOR_RED, /* Default port color is red */
+ FM_PORT_COLOR_OVERRIDE /* Ignore color */
+};
+
+/* A structure for defining FM port resources*/
+struct fm_port_rsrc_t {
+ uint32_t num; /* Committed required resource */
+ uint32_t extra; /* Extra (not committed) required resource */
+};
+
+/*Function fm_port_cfg_deq_high_priority
+ *Description Calling this routine changes the dequeue priority in the
+ * internal driver data base from its default configuration
+ * 1G: [DEFAULT_PORT_deq_high_priority_1G]
+ * 10G: [DEFAULT_PORT_deq_high_priority_10G]
+ * May be used for Non-Rx ports only
+ * Param[in] h_fm_port A handle to a FM Port module.
+ * Param[in] high_pri true to select high priority, false for
+ * normal operation.
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+int fm_port_cfg_deq_high_priority(void *h_fm_port, bool high_pri);
+
+/*Function fm_port_cfg_deq_prefetch_option
+ *Description Calling this routine changes the dequeue prefetch option
+ parameter in the
+ * internal driver data base from its default configuration
+ * [DEFAULT_PORT_deq_prefetch_option]
+ * Note: Available for some chips only
+ * May be used for Non-Rx ports only
+ * Param[in] h_fm_port A handle to a FM Port module.
+ * Param[in] deq_prefetch_option New option
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+int fm_port_cfg_deq_prefetch_option(void *h_fm_port,
+ enum fm_port_deq_prefetch_option
+ deq_prefetch_option);
+
+/*Function fm_port_cfg_buf_prefix_content
+ *Description Defines the structure, size and content of the
+ * application buffer.
+ * The prefix will
+ * In Tx ports, if 'pass_prs_result', the application
+ * should set a value to their offsets in the prefix of
+ * the FM will save the first 'priv_data_size', than,
+ * depending on 'pass_prs_result' and 'pass_time_stamp',
+ * copy parse result and timeStamp, and the packet itself
+ * (in this order), to the application buffer, and to offset.
+ * Calling this routine changes the buffer margins definitions
+ * in the internal driver data base from its default
+ * configuration:
+ * Data size: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE]
+ * Pass Parser result: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_
+ * PASS_PRS_RESULT].
+ * Pass timestamp: [DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_
+ * TIME_STAMP].
+ * May be used for all ports
+ * Param[in] h_fm_port A handle to a FM Port module.
+ * Param[in,out] p_fm_buffer_prefix_content A structure of parameters
+ * describing the
+ * structure of the buffer.
+ * Out parameter: Start margin -
+ * offset
+ * of data from start of
+ * external buffer.
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+int fm_port_cfg_buf_prefix_content(void *h_fm_port,
+ struct fm_buffer_prefix_content_t *
+ p_fm_buffer_prefix_content);
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+/*Function fm_port_cfg_bcb_wa
+ *Description Configures BCB errata workaround.
+ * When BCB errata is applicable, the workaround is always
+ * performed by FM Controller. Thus, this functions doesn't
+ * actually enable errata workaround but rather allows driver
+ * to perform adjustments required due to errata workaround
+ * execution in FM controller.
+ * Applying BCB workaround also configures FM_PORT_FRM_ERR_PHYSICAL
+ * errors to be discarded. Thus FM_PORT_FRM_ERR_PHYSICAL can't be
+ * set by FM_PORT_SetErrorsRoute() function.
+ * Param[in] h_fm_port A handle to a FM Port module.
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_config() and before
+ * fm_port_init().
+ */
+int fm_port_cfg_bcb_wa(void *h_fm_port);
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+/* FM Port Runtime control unit API functions, definitions and enums. */
+
+/*Function fm_port_get_buffer_time_stamp
+ *Description Returns the time stamp in the data buffer.
+ * Relevant for Rx ports for getting the buffer time stamp.
+ * See fm_port_cfg_buf_prefix_content for data buffer prefix
+ * configuration.
+ * Param[in] port - FM PORT module descriptor
+ * Param[in] p_data - A pointer to the data buffer.
+ *Return A pointer to the hash result on success, NULL otherwise.
+ * Cautions Allowed only following fm_port_init().
+ */
+u64 *fm_port_get_buffer_time_stamp(const struct fm_port *port, char *p_data);
+
+/*Function fm_port_disable
+ *Description Gracefully disable an FM port. The port will not start new
+ * tasks after all
+ * tasks associated with the port are terminated.
+ * Param[in] h_fm_port A handle to a FM Port module.
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_init().
+ * This is a blocking routine, it returns after port is
+ * gracefully stopped, i.e. the port will not except new frames,
+ * but it will finish all frames or tasks which were already began
+ */
+int fm_port_disable(struct fm_port *port);
+
+int fm_port_suspend(struct fm_port *port);
+/*Function fm_port_enable
+ *Description A runtime routine provided to allow disable/enable of port.
+ * Param[in] h_fm_port A handle to a FM Port module.
+ *Return 0 on success; Error code otherwise.
+ * Cautions Allowed only following fm_port_init().
+ */
+int fm_port_enable(struct fm_port *port);
+
+int fm_port_resume(struct fm_port *port);
+#ifdef NCSW_BACKWARD_COMPATIBLE_API
+#define fm_port_cfg_tx_fifo_deq_pipeline_depth \
+fm_port_cfg_fifo_deq_pipeline_depth
+#endif /* NCSW_BACKWARD_COMPATIBLE_API */
+
+#endif /* __FM_PORT_EXT */
diff --git a/drivers/net/ethernet/freescale/fman/inc/fsl_fman_drv.h b/drivers/net/ethernet/freescale/fman/inc/fsl_fman_drv.h
index cfbf462..06bc8e9 100644
--- a/drivers/net/ethernet/freescale/fman/inc/fsl_fman_drv.h
+++ b/drivers/net/ethernet/freescale/fman/inc/fsl_fman_drv.h
@@ -37,10 +37,44 @@
#include <linux/types.h>
#include <linux/device.h> /* struct device */
+#include "fm_mac_ext.h"
/* FM device opaque structure used for type checking */
struct fm;
+/* A structure .., */
+struct fm_port;
+
+/* A structure of information about each of the external
+ * buffer pools used by the port,
+ */
+struct fm_port_pool_param {
+ uint8_t id; /* External buffer pool id */
+ uint16_t size; /* External buffer pool buffer size*/
+};
+
+/* structure for additional port parameters */
+struct fm_port_params {
+ uint32_t errq; /* Error Queue Id. */
+ uint32_t defq; /* For Tx and HC - Default Confirmation queue,
+ * 0 means no Tx conf for processed frames.
+ * For Rx and OP - default Rx queue.
+ */
+ uint8_t num_pools; /* Number of pools use by this port */
+ struct fm_port_pool_param pool_param[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /* Parameters for each pool */
+ uint16_t priv_data_size; /* Area that user may save for his own
+ * need (E.g. save the SKB)
+ */
+ bool parse_results; /* Put the parser-results in the Rx/Tx buffer */
+ bool hash_results; /* Put the hash-results in the Rx/Tx buffer */
+ bool time_stamp; /* Put the time-stamp in the Rx/Tx buffer */
+ uint16_t data_align; /* value for selecting a data alignment
+ * (must be a power of 2);
+ * if write optimization is used, must be >= 16.
+ */
+};
+
/* fm_bind
* Bind to a specific FM device.
*
@@ -60,6 +94,70 @@ void fm_unbind(struct fm *fm);
void *fm_get_handle(struct fm *fm);
struct resource *fm_get_mem_region(struct fm *fm);
+/* fm_port_bind
+ * Bind to a specific FM-port device (may be Rx or Tx port).
+ * fm_port_dev - the OF handle of the FM port device.
+ * Return A handle of the FM port device.
+ * Allowed only after the port was created.
+ */
+struct fm_port *fm_port_bind(struct device *fm_port_dev);
+
+/* fm_port_unbind
+ * Un-bind from a specific FM-port device (may be Rx or Tx port).
+ * port - A handle of the FM port device.
+ * Allowed only after the port was created.
+ */
+void fm_port_unbind(struct fm_port *port);
+
+/* fm_set_rx_port_params
+ * Configure parameters for a specific Rx FM-port device.
+ * port - A handle of the FM port device.
+ * params - Rx port parameters
+ * Allowed only after the port is binded.
+ */
+void fm_set_rx_port_params(struct fm_port *port, struct fm_port_params *params);
+
+/* fm_port_get_buff_layout_ext_params
+ * Get data_align from the device tree chosen node if applied.
+ * This function will only update these two parameters.
+ * When this port has no such parameters in the device tree
+ * values will be set to 0.
+ * port - A handle of the FM port device.
+ * params - PCD port parameters
+ * Allowed only after the port is binded.
+ */
+void fm_port_get_buff_layout_ext_params(struct fm_port *port,
+ struct fm_port_params *params);
+
+/* fm_get_tx_port_channel
+ * Get qman-channel number for this Tx port.
+ * port - A handle of the FM port device.
+ * Return qman-channel number for this Tx port.
+ * Allowed only after the port is binded.
+ */
+int fm_get_tx_port_channel(struct fm_port *port);
+
+/* fm_set_tx_port_params
+ * Configure parameters for a specific Tx FM-port device
+ * port - A handle of the FM port device.
+ * params - Tx port parameters
+ * Allowed only after the port is binded.
+ */
+void fm_set_tx_port_params(struct fm_port *port, struct fm_port_params *params);
+
+void *fm_port_get_handle(const struct fm_port *port);
+
+/* fm_port_get_base_address
+ *
+ * Get base address of this port. Useful for accessing
+ * port-specific registers (i.e., not common ones).
+ *
+ * port - A handle of the FM port device.
+ *
+ * base_addr - The port's base addr (virtual address).
+ */
+void fm_port_get_base_addr(const struct fm_port *port, uint64_t *base_addr);
+
/* fm_mutex_lock
*
* Lock function required before any FMD/LLD call.
diff --git a/drivers/net/ethernet/freescale/fman/port/Makefile b/drivers/net/ethernet/freescale/fman/port/Makefile
index 54b1fa4..55825e3 100644
--- a/drivers/net/ethernet/freescale/fman/port/Makefile
+++ b/drivers/net/ethernet/freescale/fman/port/Makefile
@@ -1,3 +1,3 @@
obj-y += fsl_fman_port.o
-fsl_fman_port-objs := fman_port.o
+fsl_fman_port-objs := fman_port.o fm_port.o
diff --git a/drivers/net/ethernet/freescale/fman/port/fm_port.c b/drivers/net/ethernet/freescale/fman/port/fm_port.c
new file mode 100644
index 0000000..f0db7fb
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/port/fm_port.c
@@ -0,0 +1,1484 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* File fm_port.c
+ * Description FM driver routines implementation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "service.h"
+#include "fm_muram_ext.h"
+
+#include "fman_common.h"
+#include "fm_port.h"
+#include "dpaa_integration_ext.h"
+
+#include <linux/string.h>
+#include <linux/slab.h>
+
+/* static functions */
+
+static int check_init_parameters(struct fm_port_t *p_fm_port)
+{
+ struct fm_port_drv_param_t *p_params = p_fm_port->
+ p_fm_port_drv_param;
+ struct fman_port_cfg *p_dflt_config = &p_params->dflt_cfg;
+ uint32_t unused_mask;
+
+ /* Rx only */
+ if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ /* external buffer pools */
+ if (!p_params->ext_buf_pools.num_of_pools_used) {
+ pr_err("ext_buf_pools.num_of_pools_used=0. At least one buffer pool must be defined\n");
+ return -EDOM;
+ }
+
+ if (fm_sp_check_buf_pools_params(&p_params->ext_buf_pools,
+ p_params->p_backup_bm_pools,
+ &p_params->buf_pool_depletion,
+ p_fm_port->port_intg->max_num_of_ext_pools,
+ p_fm_port->port_intg->bm_max_num_of_pools) != 0)
+ return -EDOM;
+ /* Check that part of IC that needs copying is small enough
+ * to enter start margin
+ */
+ if (p_params->int_context.size &&
+ (p_params->int_context.size +
+ p_params->int_context.ext_buf_offset >
+ p_params->buf_margins.start_margins)) {
+ pr_err("int_context.size is larger than start margins\n");
+ return -EDOM;
+ }
+
+ if ((p_params->liodn_offset != DPAA_LIODN_DONT_OVERRIDE) &&
+ (p_params->liodn_offset & ~FM_LIODN_OFFSET_MASK)) {
+ pr_err("liodn_offset is larger than %d\n",
+ FM_LIODN_OFFSET_MASK + 1);
+ }
+#ifdef FM_NO_BACKUP_POOLS
+ if ((p_fm_port->fm_rev_info.major_rev != 4) &&
+ (p_fm_port->fm_rev_info.major_rev < 6))
+ if (p_fm_port->p_fm_port_drv_param->
+ p_backup_bm_pools) {
+ pr_err("BackupBmPools\n");
+ return -ENOSYS;
+ }
+#endif /* FM_NO_BACKUP_POOLS */
+ }
+
+ /* Non Rx ports */
+ else {
+ if (p_params->deq_sub_portal >=
+ p_fm_port->port_intg->fm_max_num_of_sub_portals) {
+ pr_err("deq_sub_portal has to be in the range of 0 - %d\n",
+ p_fm_port->port_intg->fm_max_num_of_sub_portals);
+ return -EDOM;
+ }
+
+ /* to protect HW internal-context from overwrite */
+ if ((p_params->int_context.size) &&
+ (p_params->int_context.int_context_offset <
+ MIN_TX_INT_OFFSET)) {
+ pr_err("non-Rx int_context.int_context_offset can't be smaller than %d\n",
+ MIN_TX_INT_OFFSET);
+ return -EDOM;
+ }
+
+ if ((p_fm_port->port_type == FM_PORT_TYPE_TX) ||
+ /* in O/H DEFAULT_NOT_SUPPORTED indicates that
+ * it is not supported and should not be checked
+ */
+ (p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth != DEFAULT_NOT_SUPPORTED)) {
+ /* Check that not larger than 8 */
+ if ((!p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth) ||
+ (p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth >
+ MAX_FIFO_PIPELINE_DEPTH)) {
+ pr_err("fifoDeqPipelineDepth can't be larger than %d\n",
+ MAX_FIFO_PIPELINE_DEPTH);
+ return -EDOM;
+ }
+ }
+ }
+
+ /* Rx Or Offline Parsing */
+ if ((p_fm_port->port_type == FM_PORT_TYPE_RX) ||
+ (p_fm_port->port_type == FM_PORT_TYPE_OP)) {
+ if (!p_params->dflt_fqid) {
+ pr_err("dflt_fqid must be between 1 and 2^24-1\n");
+ return -EDOM;
+ }
+ }
+
+ /* All ports */
+ /* common BMI registers values */
+ /* Check that Queue Id is not larger than 2^24, and is not 0 */
+ if ((p_params->err_fqid & ~0x00FFFFFF) || !p_params->err_fqid) {
+ pr_err("err_fqid must be between 1 and 2^24-1\n");
+ return -EDOM;
+ }
+ if (p_params->dflt_fqid & ~0x00FFFFFF) {
+ pr_err("dflt_fqid must be between 1 and 2^24-1\n");
+ return -EDOM;
+ }
+
+ /* Rx only */
+ if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ if (p_dflt_config->rx_pri_elevation % BMI_FIFO_UNITS) {
+ pr_err("rx_fifo_pri_elevation_level has to be divisible by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+ if ((p_dflt_config->rx_pri_elevation < BMI_FIFO_UNITS) ||
+ (p_dflt_config->rx_pri_elevation >
+ p_fm_port->port_intg->max_port_fifo_size)) {
+ pr_err("rx_fifo_pri_elevation_level not in range of 256 - %d\n",
+ p_fm_port->port_intg->max_port_fifo_size);
+ return -EDOM;
+ }
+ if (p_dflt_config->rx_fifo_thr % BMI_FIFO_UNITS) {
+ pr_err("rx_fifo_threshold must be div by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+ if ((p_dflt_config->rx_fifo_thr < BMI_FIFO_UNITS) ||
+ (p_dflt_config->rx_fifo_thr >
+ p_fm_port->port_intg->max_port_fifo_size)) {
+ pr_err("rx_fifo_threshold has to be in the range of 256 - %d\n",
+ p_fm_port->port_intg->max_port_fifo_size);
+ return -EDOM;
+ }
+
+ /* Check that not larger than 16 */
+ if (p_dflt_config->rx_cut_end_bytes > FRAME_END_DATA_SIZE) {
+ pr_err("cut_bytes_from_end can't be larger than %d\n",
+ FRAME_END_DATA_SIZE);
+ return -EDOM;
+ }
+
+ if (fm_sp_check_buf_margins(&p_params->buf_margins) != 0)
+ return -EDOM;
+
+ /* extra FIFO size (allowed only to Rx ports) */
+ if (p_params->set_size_of_fifo &&
+ (p_fm_port->fifo_bufs.extra % BMI_FIFO_UNITS)) {
+ pr_err("fifo_bufs.extra has to be divisible by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+
+ if (p_params->buf_pool_depletion.pools_grp_mode_enable &&
+ !p_params->buf_pool_depletion.num_of_pools) {
+ pr_err("buf_pool_depletion.num_of_pools can not be 0 when pools_grp_mode_enable=true\n");
+ return -EDOM;
+ }
+#ifdef FM_CSI_CFED_LIMIT
+ if (p_fm_port->fm_rev_info.major_rev == 4) {
+ /* Check that not larger than 16 */
+ if (p_dflt_config->rx_cut_end_bytes +
+ p_dflt_config->checksum_bytes_ignore >
+ FRAME_END_DATA_SIZE) {
+ pr_err("cheksum_last_bytes_ignore + cut_bytes_from_end can't be larger than %d\n",
+ FRAME_END_DATA_SIZE);
+ return -EDOM;
+ }
+ }
+#endif /* FM_CSI_CFED_LIMIT */
+ }
+
+ /* Non Rx ports */
+ /* extra FIFO size (allowed only to Rx ports) */
+ else if (p_fm_port->fifo_bufs.extra) {
+ pr_err(" No fifo_bufs.extra for non Rx ports\n");
+ return -EDOM;
+ }
+
+ /* Tx only */
+ if (p_fm_port->port_type == FM_PORT_TYPE_TX) {
+ if (p_dflt_config->tx_fifo_min_level % BMI_FIFO_UNITS) {
+ pr_err("tx_fifo_min_fill_level has to be divisible by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+ if (p_dflt_config->tx_fifo_min_level >
+ (p_fm_port->port_intg->max_port_fifo_size - 256)) {
+ pr_err("tx_fifo_min_fill_level has to be in the range of 0 - %d\n",
+ (p_fm_port->port_intg->max_port_fifo_size -
+ 256));
+ return -EDOM;
+ }
+ if (p_dflt_config->tx_fifo_low_comf_level % BMI_FIFO_UNITS) {
+ pr_err("tx_fifo_low_comf_level has to be divisible by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+ if ((p_dflt_config->tx_fifo_low_comf_level < BMI_FIFO_UNITS) ||
+ (p_dflt_config->tx_fifo_low_comf_level >
+ p_fm_port->port_intg->max_port_fifo_size)) {
+ pr_err("tx_fifo_low_comf_level has to be in the range of 256 - %d\n",
+ p_fm_port->port_intg->max_port_fifo_size);
+ return -EDOM;
+ }
+ if (p_fm_port->port_speed == FM_PORT_SPEED_1G)
+ if (p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth > 2) {
+ pr_err("fifoDeqPipelineDepth for 1G can't be larger than 2\n");
+ return -EDOM;
+ }
+ }
+
+ /* Non Tx Ports */
+ /* If discard override was selected , no frames may be discarded. */
+ else if (p_dflt_config->discard_override && p_params->
+ errors_to_discard) {
+ pr_err("errors_to_discard is not empty, but frm_discard_override selected (all discarded frames to be enqueued to error queue).\n");
+ return -ENOSYS;
+ }
+
+ /* Rx and Offline parsing */
+ if ((p_fm_port->port_type == FM_PORT_TYPE_RX) ||
+ (p_fm_port->port_type == FM_PORT_TYPE_OP)) {
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP)
+ unused_mask = BMI_STATUS_OP_MASK_UNUSED;
+ else
+ unused_mask = BMI_STATUS_RX_MASK_UNUSED;
+
+ /* Check that no common bits with BMI_STATUS_MASK_UNUSED */
+ if (p_params->errors_to_discard & unused_mask) {
+ pr_err("errors_to_discard contains undefined bits\n");
+ return -ENOSYS;
+ }
+ }
+
+ /* Offline Ports */
+#ifdef FM_OP_OPEN_DMA_MIN_LIMIT
+ if ((p_fm_port->fm_rev_info.major_rev >= 6) &&
+ (p_fm_port->port_type == FM_PORT_TYPE_OP) &&
+ p_params->set_num_of_open_dmas &&
+ (p_fm_port->open_dmas.num < MIN_NUM_OF_OP_DMAS)) {
+ pr_err("For Offline port, open_dmas.num can't be smaller than %d\n",
+ MIN_NUM_OF_OP_DMAS);
+ return -EDOM;
+ }
+#endif /* FM_OP_OPEN_DMA_MIN_LIMIT */
+
+ /* Offline Ports */
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+#ifndef FM_FRAME_END_PARAMS_FOR_OP
+ if ((p_fm_port->fm_rev_info.major_rev < 6) &&
+ (p_fm_port->p_fm_port_drv_param->
+ cheksum_last_bytes_ignore !=
+ DEFAULT_NOT_SUPPORTED)) {
+ /* this is an indication that user called config
+ * for this mode which is not supported in this
+ * integration
+ */
+ pr_err("cheksum_last_bytes_ignore is available for Rx&Tx ports only\n");
+ return -EDOM;
+ }
+#endif /* !FM_FRAME_END_PARAMS_FOR_OP */
+
+#ifndef FM_DEQ_PIPELINE_PARAMS_FOR_OP
+ if ((!((p_fm_port->fm_rev_info.major_rev == 4) ||
+ (p_fm_port->fm_rev_info.major_rev >= 6))) &&
+ (p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth != DEFAULT_NOT_SUPPORTED)) {
+ /* this is an indication that user called config for
+ * this mode which is not supported in this integration
+ **/
+ pr_err("fifoDeqPipelineDepth is available for Tx ports only\n");
+ return -ENOSYS;
+ }
+#endif /* !FM_DEQ_PIPELINE_PARAMS_FOR_OP */
+ }
+
+ /* All ports */
+
+ /* Check that not larger than 16 */
+ if ((p_params->cheksum_last_bytes_ignore > FRAME_END_DATA_SIZE) &&
+ ((p_params->cheksum_last_bytes_ignore != DEFAULT_NOT_SUPPORTED))) {
+ pr_err("cheksum_last_bytes_ignore can't be larger than %d\n",
+ FRAME_END_DATA_SIZE);
+ return -EDOM;
+ }
+
+ if (fm_sp_check_int_context_params(&p_params->int_context) != 0)
+ return -EDOM;
+
+ /* common BMI registers values */
+ if (p_params->set_num_of_tasks &&
+ ((!p_fm_port->tasks.num) ||
+ (p_fm_port->tasks.num > MAX_NUM_OF_TASKS))) {
+ pr_err("tasks.num can't be larger than %d\n",
+ MAX_NUM_OF_TASKS);
+ return -EDOM;
+ }
+ if (p_params->set_num_of_tasks &&
+ (p_fm_port->tasks.extra > MAX_NUM_OF_EXTRA_TASKS)) {
+ pr_err("tasks.extra can't be larger than %d\n",
+ MAX_NUM_OF_EXTRA_TASKS);
+ return -EDOM;
+ }
+ if (p_params->set_num_of_open_dmas &&
+ ((!p_fm_port->open_dmas.num) ||
+ (p_fm_port->open_dmas.num > MAX_NUM_OF_DMAS))) {
+ pr_err("open_dmas.num can't be larger than %d\n",
+ MAX_NUM_OF_DMAS);
+ return -EDOM;
+ }
+ if (p_params->set_num_of_open_dmas &&
+ (p_fm_port->open_dmas.extra > MAX_NUM_OF_EXTRA_DMAS)) {
+ pr_err("open_dmas.extra can't be larger than %d\n",
+ MAX_NUM_OF_EXTRA_DMAS);
+ return -EDOM;
+ }
+ if (p_params->set_size_of_fifo &&
+ (!p_fm_port->fifo_bufs.num || (p_fm_port->fifo_bufs.num >
+ p_fm_port->port_intg->max_port_fifo_size))) {
+ pr_err("fifo_bufs.num has to be in the range of 256 - %d\n",
+ p_fm_port->port_intg->max_port_fifo_size);
+ return -EDOM;
+ }
+ if (p_params->set_size_of_fifo &&
+ (p_fm_port->fifo_bufs.num % BMI_FIFO_UNITS)) {
+ pr_err("fifo_bufs.num has to be divisible by %d\n",
+ BMI_FIFO_UNITS);
+ return -EDOM;
+ }
+
+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
+ if (p_fm_port->fm_rev_info.major_rev == 4)
+ if (p_fm_port->p_fm_port_drv_param->deq_prefetch_option !=
+ DEFAULT_NOT_SUPPORTED) {
+ /* this is an indication that user called config
+ * for this mode which is not supported in this
+ * integration
+ **/
+ pr_err("deq_prefetch_option\n");
+ return -ENOSYS;
+ }
+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
+
+ return 0;
+}
+
+/* Checks if p_fm_port driver parameters were initialized
+ * returns 0 if success else returns error code
+ */
+static int is_init_done(struct fm_port_drv_param_t *p_fm_port_drv_parameters)
+{
+ if (!p_fm_port_drv_parameters)
+ return 0;
+ return -ENOSYS;
+}
+
+static int verify_size_of_fifo(struct fm_port_t *p_fm_port)
+{
+ uint32_t min_fifo_size_required = 0, opt_fifo_size_for_b2b = 0;
+
+ /* TX PORTS */
+ if (p_fm_port->port_type == FM_PORT_TYPE_TX) {
+ min_fifo_size_required = (uint32_t)
+ (ROUND_UP(p_fm_port->max_frame_length,
+ BMI_FIFO_UNITS) + (3 * BMI_FIFO_UNITS));
+
+ min_fifo_size_required +=
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.tx_fifo_deq_pipeline_depth * BMI_FIFO_UNITS;
+
+ opt_fifo_size_for_b2b = min_fifo_size_required;
+
+ /* Add some margin for back-to-back capability to improve
+ * performance, allows the hardware to pipeline new frame dma
+ * while the previous frame not yet transmitted.
+ */
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ opt_fifo_size_for_b2b += 3 * BMI_FIFO_UNITS;
+ else
+ opt_fifo_size_for_b2b += 2 * BMI_FIFO_UNITS;
+ }
+
+ /* RX PORTS */
+ else if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ if (p_fm_port->fm_rev_info.major_rev == 4) {
+ if (p_fm_port->rx_pools_params.num_of_pools == 1)
+ min_fifo_size_required = 8 * BMI_FIFO_UNITS;
+ else
+ min_fifo_size_required = (uint32_t)
+ (ROUND_UP
+ (p_fm_port->
+ rx_pools_params.second_largest_buf_size,
+ BMI_FIFO_UNITS) + (7 * BMI_FIFO_UNITS));
+ } else {
+ if (p_fm_port->fm_rev_info.major_rev >= 6)
+ min_fifo_size_required = (uint32_t)
+ (ROUND_UP(p_fm_port->max_frame_length,
+ BMI_FIFO_UNITS) + (5 * BMI_FIFO_UNITS));
+ /* 4 according to spec + 1 for FOF>0 */
+ else
+ min_fifo_size_required = (uint32_t)
+ (ROUND_UP(min(p_fm_port->max_frame_length,
+ p_fm_port->rx_pools_params.
+ largest_buf_size),
+ BMI_FIFO_UNITS) + (7 * BMI_FIFO_UNITS));
+ }
+
+ opt_fifo_size_for_b2b = min_fifo_size_required;
+
+ /* Add some margin for back-to-back capability to improve
+ * performance,allows the hardware to pipeline new frame dma
+ * while the previous frame not yet transmitted.
+ */
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ opt_fifo_size_for_b2b += 8 * BMI_FIFO_UNITS;
+ else
+ opt_fifo_size_for_b2b += 3 * BMI_FIFO_UNITS;
+ }
+
+ /* For O/H ports, check fifo size and update if necessary */
+ else if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+ if (p_fm_port->fm_rev_info.major_rev >= 6) {
+ opt_fifo_size_for_b2b = (uint32_t)(ROUND_UP(
+ p_fm_port->max_frame_length,
+ BMI_FIFO_UNITS) +
+ ((p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth + 5) *
+ BMI_FIFO_UNITS));
+ min_fifo_size_required = opt_fifo_size_for_b2b;
+ /* 4 according to spec + 1 for FOF>0 */
+ } else {
+ opt_fifo_size_for_b2b =
+ (uint32_t)((p_fm_port->tasks.num + 2) * BMI_FIFO_UNITS);
+ min_fifo_size_required = opt_fifo_size_for_b2b;
+ }
+ }
+
+ ASSERT(min_fifo_size_required > 0);
+ ASSERT(opt_fifo_size_for_b2b >= min_fifo_size_required);
+
+ /* Verify the size */
+ if (p_fm_port->fifo_bufs.num < min_fifo_size_required)
+ pr_debug("FIFO size should be enlarged to %d bytes\n",
+ min_fifo_size_required);
+ else if (p_fm_port->fifo_bufs.num < opt_fifo_size_for_b2b)
+ pr_debug("For b2b processing,FIFO may be enlarged to %d bytes\n",
+ opt_fifo_size_for_b2b);
+
+ return 0;
+}
+
+static void fm_port_drv_param_free(struct fm_port_t *p_fm_port)
+{
+ kfree(p_fm_port->p_fm_port_drv_param);
+ p_fm_port->p_fm_port_drv_param = NULL;
+}
+
+static int set_ext_buffer_pools(struct fm_port_t *p_fm_port)
+{
+ struct fm_ext_pools_t *p_ext_buf_pools =
+ &p_fm_port->p_fm_port_drv_param->ext_buf_pools;
+ struct fm_buf_pool_depletion_t *p_buf_pool_depletion =
+ &p_fm_port->p_fm_port_drv_param->buf_pool_depletion;
+ uint8_t ordered_array[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ uint16_t sizes_array[BM_MAX_NUM_OF_POOLS];
+ int i = 0, j = 0, err;
+ struct fman_port_bpools bpools;
+
+ memset(&ordered_array, 0,
+ sizeof(uint8_t) * FM_PORT_MAX_NUM_OF_EXT_POOLS);
+ memset(&sizes_array, 0, sizeof(uint16_t) * BM_MAX_NUM_OF_POOLS);
+ memcpy(&p_fm_port->ext_buf_pools, p_ext_buf_pools,
+ sizeof(struct fm_ext_pools_t));
+
+ fm_sp_set_buf_pools_in_asc_order_of_buf_sizes(p_ext_buf_pools,
+ ordered_array,
+ sizes_array);
+
+ /* Prepare flibs bpools structure */
+ memset(&bpools, 0, sizeof(struct fman_port_bpools));
+ bpools.count = p_ext_buf_pools->num_of_pools_used;
+ bpools.counters_enable = true;
+ for (i = 0; i < p_ext_buf_pools->num_of_pools_used; i++) {
+ bpools.bpool[i].bpid = ordered_array[i];
+ bpools.bpool[i].size = sizes_array[ordered_array[i]];
+ /* functionality available only for some derivatives
+ * (limited by config)
+ */
+ if (p_fm_port->p_fm_port_drv_param->p_backup_bm_pools)
+ for (j = 0; j < p_fm_port->p_fm_port_drv_param->
+ p_backup_bm_pools->num_of_backup_pools; j++)
+ if (ordered_array[i] ==
+ p_fm_port->p_fm_port_drv_param->
+ p_backup_bm_pools->pool_ids[j]) {
+ bpools.bpool[i].is_backup = true;
+ break;
+ }
+ }
+
+ /* save pools parameters for later use */
+ p_fm_port->rx_pools_params.num_of_pools =
+ p_ext_buf_pools->num_of_pools_used;
+ p_fm_port->rx_pools_params.largest_buf_size =
+ sizes_array[ordered_array[p_ext_buf_pools->
+ num_of_pools_used - 1]];
+ p_fm_port->rx_pools_params.second_largest_buf_size =
+ sizes_array[ordered_array[p_ext_buf_pools->
+ num_of_pools_used - 2]];
+
+ /* FMBM_RMPD reg. - pool depletion */
+ if (p_buf_pool_depletion->pools_grp_mode_enable) {
+ bpools.grp_bp_depleted_num = p_buf_pool_depletion->
+num_of_pools;
+ for (i = 0; i < p_fm_port->port_intg->bm_max_num_of_pools;
+ i++) {
+ if (p_buf_pool_depletion->pools_to_consider[i]) {
+ for (j = 0; j < p_ext_buf_pools->
+ num_of_pools_used; j++) {
+ if (i == ordered_array[j]) {
+ bpools.bpool[j].
+ grp_bp_depleted = true;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ if (p_buf_pool_depletion->single_pool_mode_enable) {
+ for (i = 0; i < p_fm_port->port_intg->bm_max_num_of_pools;
+ i++) {
+ if (p_buf_pool_depletion->
+ pools_to_consider_for_single_mode[i]) {
+ for (j = 0; j < p_ext_buf_pools->
+ num_of_pools_used; j++) {
+ if (i == ordered_array[j]) {
+ bpools.bpool[j].
+ single_bp_depleted = true;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ /* Issue flibs function */
+ err = fman_port_set_bpools(&p_fm_port->port, &bpools);
+ if (err != 0) {
+ pr_err("fman_port_set_bpools\n");
+ return -EDOM;
+ }
+
+ kfree(p_fm_port->p_fm_port_drv_param->p_backup_bm_pools);
+
+ return 0;
+}
+
+static int init_low_level_driver(struct fm_port_t *p_fm_port)
+{
+ struct fm_port_drv_param_t *p_drv_params = p_fm_port->
+ p_fm_port_drv_param;
+ struct fman_port_params port_params;
+ uint32_t tmp_val;
+
+ /* Set up flibs parameters and issue init function */
+
+ memset(&port_params, 0, sizeof(struct fman_port_params));
+ port_params.discard_mask = p_drv_params->errors_to_discard;
+ port_params.dflt_fqid = p_drv_params->dflt_fqid;
+ port_params.err_fqid = p_drv_params->err_fqid;
+ port_params.deq_sp = p_drv_params->deq_sub_portal;
+ port_params.dont_release_buf = p_drv_params->dont_release_buf;
+ switch (p_fm_port->port_type) {
+ case (FM_PORT_TYPE_RX):
+ port_params.err_mask =
+ (RX_ERRS_TO_ENQ & ~port_params.discard_mask);
+ if (p_drv_params->forward_reuse_int_context)
+ p_drv_params->dflt_cfg.rx_fd_bits =
+ (uint8_t)(BMI_PORT_RFNE_FRWD_RPD >> 24);
+ break;
+
+ case (FM_PORT_TYPE_OP):
+ port_params.err_mask =
+ (OP_ERRS_TO_ENQ & ~port_params.discard_mask);
+ break;
+ break;
+
+ default:
+ break;
+ }
+
+ tmp_val = (uint32_t)((p_fm_port->internal_buf_offset %
+ OFFSET_UNITS) ? (p_fm_port->
+ internal_buf_offset / OFFSET_UNITS +
+ 1) : (p_fm_port->internal_buf_offset /
+ OFFSET_UNITS));
+ p_fm_port->internal_buf_offset = (uint8_t)(tmp_val * OFFSET_UNITS);
+ p_drv_params->dflt_cfg.int_buf_start_margin =
+ p_fm_port->internal_buf_offset;
+
+ p_drv_params->dflt_cfg.ext_buf_start_margin =
+ p_drv_params->buf_margins.start_margins;
+ p_drv_params->dflt_cfg.ext_buf_end_margin =
+ p_drv_params->buf_margins.end_margins;
+
+ p_drv_params->dflt_cfg.ic_ext_offset =
+ p_drv_params->int_context.ext_buf_offset;
+ p_drv_params->dflt_cfg.ic_int_offset =
+ p_drv_params->int_context.int_context_offset;
+ p_drv_params->dflt_cfg.ic_size = p_drv_params->int_context.size;
+
+ p_drv_params->dflt_cfg.stats_counters_enable = true;
+ p_drv_params->dflt_cfg.perf_counters_enable = true;
+ p_drv_params->dflt_cfg.queue_counters_enable = true;
+
+ p_drv_params->dflt_cfg.perf_cnt_params.task_val =
+ (uint8_t)p_fm_port->tasks.num;
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP)
+ p_drv_params->dflt_cfg.perf_cnt_params.queue_val = 0;
+ else
+ p_drv_params->dflt_cfg.perf_cnt_params.queue_val = 1;
+ p_drv_params->dflt_cfg.perf_cnt_params.dma_val =
+ (uint8_t)p_fm_port->open_dmas.num;
+ p_drv_params->dflt_cfg.perf_cnt_params.fifo_val =
+ p_fm_port->fifo_bufs.num;
+
+ if (0 !=
+ fman_port_init(&p_fm_port->port, &p_drv_params->dflt_cfg,
+ &port_params)) {
+ pr_err("fman_port_init\n");
+ return -ENODEV;
+ }
+
+ /* The code bellow is a trick so the FM will not release the buffer
+ * to BM nor will try to enqueue the frame to QM
+ */
+ if (p_fm_port->port_type == FM_PORT_TYPE_TX) {
+ if (!p_drv_params->dflt_fqid && p_drv_params->
+ dont_release_buf) {
+ /* override fmbm_tcfqid 0 with a false non-0 value.
+ * This will force FM to act according to tfene.
+ * Otherwise, if fmbm_tcfqid is 0 the FM will release
+ * buffers to BM regardless of fmbm_tfene
+ */
+ WRITE_UINT32(p_fm_port->port.bmi_regs->tx.fmbm_tcfqid,
+ 0xFFFFFF);
+ WRITE_UINT32(p_fm_port->port.bmi_regs->tx.fmbm_tfene,
+ NIA_ENG_BMI | NIA_BMI_AC_TX_RELEASE);
+ }
+ }
+
+ return 0;
+}
+
+static struct fm_port_intg_t *set_port_intg_params(struct fm_port_t *p_fm_port)
+{
+ struct fm_port_intg_t *intg;
+ uint32_t bmi_max_fifo_size;
+
+ intg = kzalloc(sizeof(*intg), GFP_KERNEL);
+ if (!intg)
+ return NULL;
+
+ bmi_max_fifo_size = fm_get_bmi_max_fifo_size(p_fm_port->h_fm);
+
+ intg->max_port_fifo_size =
+ MAX_PORT_FIFO_SIZE(bmi_max_fifo_size);
+
+ switch (p_fm_port->fm_rev_info.major_rev) {
+ case FM_IP_BLOCK_P2_P3_P5:
+ case FM_IP_BLOCK_P4:
+ intg->max_num_of_ext_pools = 4;
+ intg->fm_max_num_of_sub_portals = 12;
+ intg->bm_max_num_of_pools = 64;
+ break;
+
+ case FM_IP_BLOCK_P1:
+ intg->max_num_of_ext_pools = 4;
+ intg->fm_max_num_of_sub_portals = 7;
+ intg->bm_max_num_of_pools = 8;
+ break;
+
+ case FM_IP_BLOCK_B_T:
+ intg->max_num_of_ext_pools = 8;
+ intg->fm_max_num_of_sub_portals = 16;
+ intg->bm_max_num_of_pools = 64;
+ break;
+
+ default:
+ pr_err("Unsupported FMan version\n");
+ kfree(intg);
+ return NULL;
+ }
+
+ return intg;
+}
+
+/* API Init unit functions */
+
+void *fm_port_config(struct fm_port_params_t *p_fm_port_params)
+{
+ struct fm_port_t *p_fm_port;
+ uintptr_t base_addr = p_fm_port_params->base_addr;
+#ifdef FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127
+ uint32_t tmp_reg;
+#endif /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 */
+ enum fman_port_type fman_port_type = E_FMAN_PORT_TYPE_DUMMY;
+
+ /* Allocate FM structure */
+ p_fm_port = kzalloc(sizeof(*p_fm_port), GFP_KERNEL);
+ if (!p_fm_port)
+ return NULL;
+
+ /* Allocate the FM driver's parameters structure */
+ p_fm_port->p_fm_port_drv_param =
+ kzalloc(sizeof(*p_fm_port->p_fm_port_drv_param),
+ GFP_KERNEL);
+ if (!p_fm_port->p_fm_port_drv_param) {
+ kfree(p_fm_port);
+ pr_err("FM Port driver parameters\n");
+ return NULL;
+ }
+
+ /* Initialize FM port parameters which will be kept by the driver */
+ p_fm_port->port_type = p_fm_port_params->port_type;
+ p_fm_port->port_speed = p_fm_port_params->port_speed;
+ p_fm_port->port_id = p_fm_port_params->port_id;
+ p_fm_port->f_exception = p_fm_port_params->f_exception;
+ p_fm_port->h_app = p_fm_port_params->h_app;
+ p_fm_port->h_fm = p_fm_port_params->h_fm;
+
+ /* get FM revision */
+ fm_get_revision(p_fm_port->h_fm, &p_fm_port->fm_rev_info);
+
+ p_fm_port->port_intg = set_port_intg_params(p_fm_port);
+ if (!p_fm_port->port_intg) {
+ kfree(p_fm_port->p_fm_port_drv_param);
+ kfree(p_fm_port);
+ return NULL;
+ }
+
+ if (p_fm_port->fm_rev_info.major_rev >= 6) {
+ if ((p_fm_port->port_type == FM_PORT_TYPE_OP) &&
+ (p_fm_port_params->port_id == FM_OH_PORT_ID))
+ pr_debug("Use nonzero portid for OP port\n");
+ }
+
+ /* Set up FM port parameters for initialization phase only */
+
+ /* First, fill in flibs struct */
+ /* In order to be aligned with flib port types, we need to translate
+ * the port type and speed to fman_port_type
+ */
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+ fman_port_type = E_FMAN_PORT_TYPE_OP;
+ } else if (p_fm_port->port_type == FM_PORT_TYPE_TX) {
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ fman_port_type = E_FMAN_PORT_TYPE_TX_10G;
+ else
+ fman_port_type = E_FMAN_PORT_TYPE_TX;
+ } else if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ fman_port_type = E_FMAN_PORT_TYPE_RX_10G;
+ else
+ fman_port_type = E_FMAN_PORT_TYPE_RX;
+ }
+ fman_port_defconfig(&p_fm_port->p_fm_port_drv_param->dflt_cfg,
+ fman_port_type);
+ /* Overwrite some integration specific parameters */
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.rx_pri_elevation =
+ DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(
+ p_fm_port->port_intg->max_port_fifo_size);
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.rx_fifo_thr =
+ p_fm_port->p_fm_port_drv_param->rx_fifo_threshold =
+ DFLT_PORT_RX_FIFO_THRESHOLD(
+ p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_intg->max_port_fifo_size);
+
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.errata_A006675 = false;
+
+#if defined(FM_OP_NO_VSP_NO_RELEASE_ERRATA_FMAN_A006675) || \
+defined(FM_ERROR_VSP_NO_MATCH_SW006)
+ if (p_fm_port->fm_rev_info.major_rev >= 6)
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.errata_A006675 =
+ true;
+#endif
+ if ((p_fm_port->fm_rev_info.major_rev == 6) &&
+ ((p_fm_port->fm_rev_info.minor_rev == 0) ||
+ (p_fm_port->fm_rev_info.minor_rev == 3)))
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.errata_A006320 =
+ true;
+ else
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.errata_A006320 =
+ false;
+
+ /* Excessive Threshold register - exists for pre-FMv3 chips only */
+ if (p_fm_port->fm_rev_info.major_rev < 6) {
+#ifdef FM_NO_RESTRICT_ON_ACCESS_RSRC
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ excessive_threshold_register = true;
+#endif /* FM_NO_RESTRICT_ON_ACCESS_RSRC */
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.fmbm_rebm_has_sgd =
+ false;
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.fmbm_tfne_has_features =
+ false;
+ } else {
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ excessive_threshold_register = false;
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.fmbm_rebm_has_sgd =
+ true;
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.fmbm_tfne_has_features = true;
+ }
+ if (p_fm_port->fm_rev_info.major_rev == 4)
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.qmi_deq_options_support = false;
+ else
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.qmi_deq_options_support = true;
+
+ /* Continue with other parameters */
+ p_fm_port->p_fm_port_drv_param->base_addr = base_addr;
+ /* set memory map pointers */
+ p_fm_port->p_fm_port_qmi_regs =
+ (struct fm_port_qmi_regs_t __iomem *)UINT_TO_PTR(base_addr +
+ QMI_PORT_REGS_OFFSET);
+ p_fm_port->p_fm_port_bmi_regs =
+ (union fm_port_bmi_regs_u __iomem *)UINT_TO_PTR(base_addr +
+ BMI_PORT_REGS_OFFSET);
+
+ p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content.priv_data_size =
+ DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE;
+ p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content.pass_prs_result =
+ DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_PRS_RESULT;
+ p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content.pass_time_stamp =
+ DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_TIME_STAMP;
+ p_fm_port->p_fm_port_drv_param->buffer_prefix_content.data_align =
+ DEFAULT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN;
+ p_fm_port->p_fm_port_drv_param->liodn_base =
+ p_fm_port_params->liodn_base;
+ p_fm_port->p_fm_port_drv_param->cheksum_last_bytes_ignore =
+ DEFAULT_PORT_cheksum_last_bytes_ignore;
+
+ p_fm_port->max_frame_length = DEFAULT_PORT_max_frame_length;
+ /* resource distribution. */
+
+ p_fm_port->fifo_bufs.num =
+ DFLT_PORT_NUM_OF_FIFO_BUFS(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed) * BMI_FIFO_UNITS;
+ p_fm_port->fifo_bufs.extra =
+ DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS * BMI_FIFO_UNITS;
+
+ p_fm_port->open_dmas.num =
+ DFLT_PORT_NUM_OF_OPEN_DMAS(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed);
+ p_fm_port->open_dmas.extra =
+ DFLT_PORT_EXTRA_NUM_OF_OPEN_DMAS(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed);
+ p_fm_port->tasks.num =
+ DFLT_PORT_NUM_OF_TASKS(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed);
+ p_fm_port->tasks.extra =
+ DFLT_PORT_EXTRA_NUM_OF_TASKS(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed);
+
+#ifdef FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981
+ if ((p_fm_port->fm_rev_info.major_rev == 6) &&
+ (p_fm_port->fm_rev_info.minor_rev == 0) &&
+ ((p_fm_port->port_type == FM_PORT_TYPE_OP) ||
+ ((p_fm_port->port_type == FM_PORT_TYPE_TX) &&
+ (p_fm_port->port_speed == FM_PORT_SPEED_1G)))) {
+ p_fm_port->open_dmas.num = 16;
+ p_fm_port->open_dmas.extra = 0;
+ }
+#endif /* FM_HEAVY_TRAFFIC_SEQUENCER_HANG_ERRATA_FMAN_A006981 */
+
+ /* Port type specific initialization: */
+ switch (p_fm_port->port_type) {
+ case (FM_PORT_TYPE_RX):
+ /* Initialize FM port parameters for initialization phase only*/
+ p_fm_port->p_fm_port_drv_param->cut_bytes_from_end =
+ DEFAULT_PORT_cut_bytes_from_end;
+ p_fm_port->p_fm_port_drv_param->en_buf_pool_depletion =
+ false;
+ p_fm_port->p_fm_port_drv_param->frm_discard_override =
+ DEFAULT_PORT_frm_discard_override;
+
+ p_fm_port->p_fm_port_drv_param->rx_fifo_pri_elevation_level =
+ DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(p_fm_port->port_intg->
+ max_port_fifo_size);
+ p_fm_port->p_fm_port_drv_param->rx_fifo_threshold =
+ DFLT_PORT_RX_FIFO_THRESHOLD(p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_intg->
+ max_port_fifo_size);
+
+ p_fm_port->p_fm_port_drv_param->buf_margins.end_margins =
+ DEFAULT_PORT_BUF_MARGINS_END_MAARGINS;
+ p_fm_port->p_fm_port_drv_param->errors_to_discard =
+ DEFAULT_PORT_errors_to_discard;
+ p_fm_port->p_fm_port_drv_param->forward_reuse_int_context =
+ DEFAULT_PORT_FORWARD_INT_CONTENT_REUSE;
+ break;
+
+ case (FM_PORT_TYPE_TX):
+ if (p_fm_port->port_speed == FM_PORT_SPEED_1G) {
+ p_fm_port->p_fm_port_drv_param->dont_release_buf =
+ false;
+#ifdef FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127
+ if (p_fm_port->fm_rev_info.major_rev >= 6) {
+ tmp_reg = 0x00001013;
+ WRITE_UINT32(p_fm_port->p_fm_port_bmi_regs->
+ tx_port_bmi_regs.fmbm_tfp,
+ tmp_reg);
+ }
+#endif /* FM_WRONG_RESET_VALUES_ERRATA_FMAN_A005127 */
+ }
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G) {
+ p_fm_port->p_fm_port_drv_param->tx_fifo_min_fill_level
+ = DFLT_PORT_TX_FIFO_MIN_FILL_LEVEL;
+ p_fm_port->p_fm_port_drv_param->tx_fifo_low_comf_level
+ = DFLT_PORT_TX_FIFO_LOW_COMF_LEVEL;
+
+ p_fm_port->p_fm_port_drv_param->deq_type =
+ DEFAULT_PORT_deq_type;
+ p_fm_port->p_fm_port_drv_param->deq_prefetch_option =
+ DEFAULT_PORT_deq_prefetch_option;
+ }
+ p_fm_port->p_fm_port_drv_param->deq_high_priority =
+ DFLT_PORT_DEQ_HIGH_PRIORITY(p_fm_port->port_speed);
+ p_fm_port->p_fm_port_drv_param->deq_byte_cnt =
+ DFLT_PORT_DEQ_BYTE_CNT(p_fm_port->port_speed);
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.
+ tx_fifo_deq_pipeline_depth = (uint8_t)
+ DFLT_PORT_FIFO_DEQ_PIPELINE_DEPTH(
+ p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed);
+ break;
+ case (FM_PORT_TYPE_OP):
+ p_fm_port->p_fm_port_drv_param->errors_to_discard =
+ DEFAULT_PORT_errors_to_discard;
+ break;
+
+ default:
+ kfree(p_fm_port->p_fm_port_drv_param);
+ kfree(p_fm_port);
+ pr_err("Invalid port type\n");
+ return NULL;
+ }
+
+#ifdef FM_QMI_NO_DEQ_OPTIONS_SUPPORT
+ if (p_fm_port->fm_rev_info.major_rev == 4)
+ p_fm_port->p_fm_port_drv_param->deq_prefetch_option =
+ (enum fm_port_deq_prefetch_option)DEFAULT_NOT_SUPPORTED;
+#endif /* FM_QMI_NO_DEQ_OPTIONS_SUPPORT */
+
+ switch (p_fm_port->port_type) {
+ case (FM_PORT_TYPE_RX):
+ /* Initialize FM port parameters for initialization phase only*/
+ memcpy(&p_fm_port->p_fm_port_drv_param->ext_buf_pools,
+ &p_fm_port_params->
+ specific_params.rx_params.ext_buf_pools,
+ sizeof(struct fm_ext_pools_t));
+ p_fm_port->p_fm_port_drv_param->err_fqid
+ = p_fm_port_params->specific_params.rx_params.err_fqid;
+ p_fm_port->p_fm_port_drv_param->dflt_fqid
+ = p_fm_port_params->specific_params.rx_params.dflt_fqid;
+ p_fm_port->p_fm_port_drv_param->liodn_offset
+ = p_fm_port_params->specific_params.rx_params.liodn_offset;
+ break;
+ case (FM_PORT_TYPE_OP):
+ case (FM_PORT_TYPE_TX):
+ p_fm_port->p_fm_port_drv_param->err_fqid =
+ p_fm_port_params->specific_params.non_rx_params.err_fqid;
+ p_fm_port->p_fm_port_drv_param->deq_sub_portal =
+ (uint8_t)(p_fm_port_params->specific_params.non_rx_params.
+ qm_channel & QMI_DEQ_CFG_SUBPORTAL_MASK);
+ p_fm_port->p_fm_port_drv_param->dflt_fqid =
+ p_fm_port_params->specific_params.non_rx_params.dflt_fqid;
+ break;
+ default:
+ kfree(p_fm_port->p_fm_port_drv_param);
+ kfree(p_fm_port);
+ pr_err("Invalid port type\n");
+ return NULL;
+ }
+
+ memset(p_fm_port->name, 0, (sizeof(char)) * MODULE_NAME_SIZE);
+ if (snprintf(p_fm_port->name, MODULE_NAME_SIZE, "FM-%d-port-%s-%d",
+ fm_get_id(p_fm_port->h_fm),
+ ((p_fm_port->port_type == FM_PORT_TYPE_OP) ? "OP" :
+ ((p_fm_port->port_type == FM_PORT_TYPE_TX) ?
+ ((p_fm_port->port_speed == FM_PORT_SPEED_10G) ? "10g-TX" :
+ "1g-TX") :
+ ((p_fm_port->port_speed == FM_PORT_SPEED_10G) ? "10g-RX" :
+ "1g-RX"))),
+ p_fm_port->port_id) == 0) {
+ kfree(p_fm_port->p_fm_port_drv_param);
+ kfree(p_fm_port);
+ pr_err("sprintf failed\n");
+ return NULL;
+ }
+
+ p_fm_port->spinlock = kmalloc(sizeof(spinlock_t), GFP_KERNEL);
+ if (!p_fm_port->spinlock) {
+ kfree(p_fm_port->p_fm_port_drv_param);
+ kfree(p_fm_port);
+ pr_err("Spin lock init failed\n");
+ return NULL;
+ }
+
+ spin_lock_init(p_fm_port->spinlock);
+
+ return p_fm_port;
+}
+
+/* Function fm_port_init
+ * Description Initializes the FM module
+ * Param[in] h_fm_port - FM module descriptor
+ * Return 0 on success; Error code otherwise.
+ */
+int fm_port_init(void *h_fm_port)
+{
+ struct fm_port_t *p_fm_port = (struct fm_port_t *)h_fm_port;
+ struct fm_port_drv_param_t *p_drv_params;
+ int err_code;
+ struct fm_inter_module_port_init_params_t fm_params;
+ struct fm_revision_info_t rev_info;
+ int ret, ret_err;
+ enum fman_port_type fman_port_type = E_FMAN_PORT_TYPE_DUMMY;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (!ret)
+ return -ENOSYS;
+
+ err_code =
+ fm_sp_build_buffer_structure(&p_fm_port->p_fm_port_drv_param->
+ int_context,
+ &p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content,
+ &p_fm_port->p_fm_port_drv_param->
+ buf_margins,
+ &p_fm_port->buffer_offsets,
+ &p_fm_port->internal_buf_offset);
+ if (err_code != 0)
+ return -err_code;
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+ if (p_fm_port->fm_rev_info.major_rev >= 6 &&
+ (p_fm_port->p_fm_port_drv_param->bcb_workaround) &&
+ ((p_fm_port->port_type == FM_PORT_TYPE_RX) &&
+ (p_fm_port->port_speed == FM_PORT_SPEED_1G))) {
+ p_fm_port->p_fm_port_drv_param->errors_to_discard |=
+ FM_PORT_FRM_ERR_PHYSICAL;
+ if (!p_fm_port->fifo_bufs.num)
+ p_fm_port->fifo_bufs.num =
+ DFLT_PORT_NUM_OF_FIFO_BUFS(
+ p_fm_port->fm_rev_info.major_rev,
+ p_fm_port->port_type,
+ p_fm_port->port_speed) *
+ BMI_FIFO_UNITS;
+ p_fm_port->fifo_bufs.num += 4 * 1024;
+ }
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+ ret_err = check_init_parameters(p_fm_port);
+ if (ret_err)
+ return ret_err;
+
+ p_drv_params = p_fm_port->p_fm_port_drv_param;
+
+ /* Set up flibs port structure */
+ memset(&p_fm_port->port, 0, sizeof(struct fman_port));
+ /* In order to be aligned with flib port types, we need to translate
+ * the port type and speed to fman_port_type
+ */
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+ fman_port_type = E_FMAN_PORT_TYPE_OP;
+ } else if (p_fm_port->port_type == FM_PORT_TYPE_TX) {
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ fman_port_type = E_FMAN_PORT_TYPE_TX_10G;
+ else
+ fman_port_type = E_FMAN_PORT_TYPE_TX;
+ } else if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ if (p_fm_port->port_speed == FM_PORT_SPEED_10G)
+ fman_port_type = E_FMAN_PORT_TYPE_RX_10G;
+ else
+ fman_port_type = E_FMAN_PORT_TYPE_RX;
+ }
+ p_fm_port->port.type = fman_port_type;
+ fm_get_revision(p_fm_port->h_fm, &rev_info);
+ p_fm_port->port.fm_rev_maj = rev_info.major_rev;
+ p_fm_port->port.fm_rev_min = rev_info.minor_rev;
+ p_fm_port->port.bmi_regs = (union fman_port_bmi_regs __iomem *)
+ UINT_TO_PTR(p_drv_params->base_addr + BMI_PORT_REGS_OFFSET);
+ p_fm_port->port.qmi_regs = (struct fman_port_qmi_regs __iomem *)
+ UINT_TO_PTR(p_drv_params->base_addr + QMI_PORT_REGS_OFFSET);
+ p_fm_port->port.ext_pools_num =
+ (uint8_t)((rev_info.major_rev == 4) ? 4 : 8);
+
+ if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ /* Call the external Buffer routine which also checks fifo
+ * size and updates it if necessary
+ */
+ /* define external buffer pools and pool depletion */
+ err_code = set_ext_buffer_pools(p_fm_port);
+ if (err_code)
+ return -err_code;
+ /* check if the largest external buffer pool is large enough */
+ if (p_drv_params->buf_margins.start_margins +
+ MIN_EXT_BUF_SIZE +
+ p_drv_params->buf_margins.end_margins >
+ p_fm_port->rx_pools_params.largest_buf_size) {
+ pr_err("buf_margins.start_margins (%d) + minimum buf size (64) + buf_margins.end_margins (%d) is larger than maximum external buffer size (%d)\n",
+ p_drv_params->buf_margins.start_margins,
+ p_drv_params->buf_margins.end_margins,
+ p_fm_port->rx_pools_params.largest_buf_size);
+ return -ENOSYS;
+ }
+ }
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+ {
+#ifdef FM_NO_OP_OBSERVED_POOLS
+ struct fm_revision_info_t rev_info;
+
+ fm_get_revision(p_fm_port->h_fm, &rev_info);
+ if ((rev_info.major_rev == 4) &&
+ (p_drv_params->en_buf_pool_depletion))
+#endif /* FM_NO_OP_OBSERVED_POOLS */
+ {
+ /* define external buffer pools */
+ err_code = set_ext_buffer_pools(p_fm_port);
+ if (err_code)
+ return -err_code;
+ }
+ }
+ }
+
+ /* Call FM module routine for communicating parameters */
+
+ memset(&fm_params, 0, sizeof(fm_params));
+ fm_params.port_id = p_fm_port->port_id;
+ fm_params.port_type = (enum fm_port_type)p_fm_port->port_type;
+ fm_params.port_speed = (enum fm_port_speed)p_fm_port->port_speed;
+ fm_params.num_of_tasks = (uint8_t)p_fm_port->tasks.num;
+ fm_params.num_of_extra_tasks = (uint8_t)p_fm_port->tasks.extra;
+ fm_params.num_of_open_dmas = (uint8_t)p_fm_port->open_dmas.num;
+ fm_params.num_of_extra_open_dmas = (uint8_t)p_fm_port->open_dmas.extra;
+
+ if (p_fm_port->fifo_bufs.num) {
+ err_code = verify_size_of_fifo(p_fm_port);
+ if (err_code != 0)
+ return -err_code;
+ }
+ fm_params.size_of_fifo = p_fm_port->fifo_bufs.num;
+ fm_params.extra_size_of_fifo = p_fm_port->fifo_bufs.extra;
+ fm_params.liodn_offset = p_drv_params->liodn_offset;
+ fm_params.liodn_base = p_drv_params->liodn_base;
+ fm_params.deq_pipeline_depth =
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.tx_fifo_deq_pipeline_depth;
+ fm_params.max_frame_length = p_fm_port->max_frame_length;
+#ifndef FM_DEQ_PIPELINE_PARAMS_FOR_OP
+ if (p_fm_port->port_type == FM_PORT_TYPE_OP) {
+ if (!((p_fm_port->fm_rev_info.major_rev == 4) ||
+ (p_fm_port->fm_rev_info.major_rev >= 6)))
+ /* OP ports do not have fifoDeqPipelineDepth,
+ * but it is needed only
+ *for deq threshold calculation.
+ */
+ fm_params.deq_pipeline_depth = 2;
+ }
+#endif /* !FM_DEQ_PIPELINE_PARAMS_FOR_OP */
+
+ err_code = fm_get_set_port_params(p_fm_port->h_fm, &fm_params);
+ if (err_code)
+ return -err_code;
+
+ err_code = init_low_level_driver(p_fm_port);
+ if (err_code != 0)
+ return -err_code;
+
+ fm_port_drv_param_free(p_fm_port);
+
+ return 0;
+}
+
+void *fm_port_get_handle(const struct fm_port *port);
+
+/* Function fm_port_free
+ * Description Frees all resources that were assigned to FM module.
+ * Calling this routine invalidates the descriptor.
+ * Param[in] h_fm_port - FM module descriptor
+ * Return 0 on success; Error code otherwise.
+ */
+int fm_port_free(struct fm_port *port)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ struct fm_inter_module_port_free_params_t fm_params;
+
+ if (p_fm_port->enabled) {
+ if (fm_port_disable(port) != 0) {
+ pr_err("fm_port_disable FAILED\n");
+ return -ENOSYS;
+ }
+ }
+
+ fm_port_drv_param_free(p_fm_port);
+
+ fm_params.port_id = p_fm_port->port_id;
+ fm_params.port_type = (enum fm_port_type)p_fm_port->port_type;
+ fm_params.deq_pipeline_depth =
+ p_fm_port->p_fm_port_drv_param->
+ dflt_cfg.tx_fifo_deq_pipeline_depth;
+
+ fm_free_port_params(p_fm_port->h_fm, &fm_params);
+
+ kfree(p_fm_port->spinlock);
+
+ kfree(p_fm_port);
+
+ return 0;
+}
+
+/* API Advanced Init unit functions */
+
+int fm_port_cfg_deq_high_priority(void *h_fm_port, bool high_pri)
+{
+ struct fm_port_t *p_fm_port = (struct fm_port_t *)h_fm_port;
+ int ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (!ret)
+ return -ENOSYS;
+
+ if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ pr_err("not available for Rx ports\n");
+ return -ENOMEM;
+ }
+
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.deq_high_pri = high_pri;
+
+ return 0;
+}
+
+int fm_port_cfg_deq_prefetch_option(void *h_fm_port,
+ enum fm_port_deq_prefetch_option
+ deq_prefetch_option)
+{
+ struct fm_port_t *p_fm_port = (struct fm_port_t *)h_fm_port;
+ int ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (!ret)
+ return -ENOSYS;
+
+ if (p_fm_port->port_type == FM_PORT_TYPE_RX) {
+ pr_err("not available for Rx ports\n");
+ return -ENODEV;
+ }
+ p_fm_port->p_fm_port_drv_param->dflt_cfg.deq_prefetch_opt =
+ (enum fman_port_deq_prefetch)deq_prefetch_option;
+
+ return 0;
+}
+
+int fm_port_cfg_buf_prefix_content(void *h_fm_port,
+ struct fm_buffer_prefix_content_t *
+ p_fm_buffer_prefix_content)
+{
+ struct fm_port_t *p_fm_port = (struct fm_port_t *)h_fm_port;
+ int ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (!ret)
+ return -ENOSYS;
+
+ memcpy(&p_fm_port->p_fm_port_drv_param->buffer_prefix_content,
+ p_fm_buffer_prefix_content,
+ sizeof(struct fm_buffer_prefix_content_t));
+ /* if data_align was not initialized by user,
+ * we return to driver's default
+ **/
+ if (!p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content.data_align)
+ p_fm_port->p_fm_port_drv_param->
+ buffer_prefix_content.data_align =
+ DEFAULT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN;
+
+ return 0;
+}
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+int fm_port_cfg_bcb_wa(void *h_fm_port)
+{
+ struct fm_port_t *p_fm_port = (struct fm_port_t *)h_fm_port;
+ int ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (!ret)
+ return -ENOSYS;
+
+ p_fm_port->p_fm_port_drv_param->bcb_workaround = true;
+
+ return 0;
+}
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+
+/* API Run-time Control unit functions */
+
+u64 *fm_port_get_buffer_time_stamp(const struct fm_port *port, char *p_data)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ int ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (ret)
+ return NULL;
+
+ if (p_fm_port->buffer_offsets.time_stamp_offset == ILLEGAL_BASE)
+ return NULL;
+
+ return (uint64_t *)PTR_MOVE(p_data,
+ p_fm_port->
+ buffer_offsets.time_stamp_offset);
+}
+EXPORT_SYMBOL(fm_port_get_buffer_time_stamp);
+
+int fm_port_disable(struct fm_port *port)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ int err, ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (ret)
+ return ret;
+
+ err = fman_port_disable(&p_fm_port->port);
+ if (err == -EBUSY) {
+ pr_debug("%s: BMI or QMI is Busy. Port forced down\n",
+ p_fm_port->name);
+ err = 0;
+ }
+
+ p_fm_port->enabled = false;
+
+ return err;
+}
+EXPORT_SYMBOL(fm_port_disable);
+
+int fm_port_suspend(struct fm_port *port)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ int err, ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (ret)
+ return ret;
+
+ err = fman_port_disable(&p_fm_port->port);
+ if (err == -EBUSY) {
+ pr_debug("%s: BMI or QMI is Busy. Port forced down\n",
+ p_fm_port->name);
+ err = 0;
+ }
+
+ p_fm_port->enabled = false;
+
+ return err;
+}
+EXPORT_SYMBOL(fm_port_suspend);
+
+int fm_port_enable(struct fm_port *port)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ int err, ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (ret)
+ return ret;
+
+ /* Used by fm_port_free routine as indication
+ * if to disable port. Thus set it to true prior
+ * to enabling itself. This way if part of enable
+ * process fails there will be still things
+ * to disable during Free. For example, if BMI
+ * enable succeeded but QMI failed, still BMI
+ * needs to be disabled by Free.
+ */
+ p_fm_port->enabled = true;
+
+ err = fman_port_enable(&p_fm_port->port);
+
+ return err;
+}
+EXPORT_SYMBOL(fm_port_enable);
+
+int fm_port_resume(struct fm_port *port)
+{
+ struct fm_port_t *p_fm_port =
+ (struct fm_port_t *)fm_port_get_handle(port);
+ int err, ret;
+
+ ret = is_init_done(p_fm_port->p_fm_port_drv_param);
+ if (ret)
+ return ret;
+
+ /* Used by fm_port_free routine as indication
+ * if to disable port. Thus set it to true prior
+ * to enabling itself. This way if part of enable
+ * process fails there will be still things
+ * to disable during Free. For example, if BMI
+ * enable succeeded but QMI failed, still BMI
+ * needs to be disabled by Free.
+ */
+ p_fm_port->enabled = true;
+
+ err = fman_port_enable(&p_fm_port->port);
+
+ return err;
+}
+EXPORT_SYMBOL(fm_port_resume);
diff --git a/drivers/net/ethernet/freescale/fman/port/fm_port.h b/drivers/net/ethernet/freescale/fman/port/fm_port.h
new file mode 100644
index 0000000..c0f2cd6
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/port/fm_port.h
@@ -0,0 +1,711 @@
+/*
+ * Copyright 2008 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* FM Port internal structures and definitions. */
+#ifndef __FM_PORT_H
+#define __FM_PORT_H
+
+#include "service.h"
+
+#include "fm_common.h"
+#include "fm_sp_common.h"
+#include "fsl_fman_sp.h"
+#include "fm_port_ext.h"
+#include "fsl_fman_port.h"
+
+#define MIN_EXT_BUF_SIZE 64
+#define DATA_ALIGNMENT 64
+#define MAX_LIODN_OFFSET 64
+
+#define MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) \
+ min((u32)bmi_max_fifo_size, (u32)1024 * BMI_FIFO_UNITS)
+
+/* Memory Map defines */
+#define BMI_PORT_REGS_OFFSET 0
+#define QMI_PORT_REGS_OFFSET 0x400
+#define PRS_PORT_REGS_OFFSET 0x800
+
+/* defaults */
+#define DFLT_PORT_DEQ_HIGH_PRIORITY(speed) \
+ ((speed == FM_PORT_SPEED_10G) ? true : false)
+#define DEFAULT_PORT_deq_type FM_PORT_DEQ_TYPE1
+#define DEFAULT_PORT_deq_prefetch_option FM_PORT_DEQ_FULL_PREFETCH
+#define DEFAULT_PORT_deq_prefetch_option_HC FM_PORT_DEQ_NO_PREFETCH
+#define DFLT_PORT_DEQ_BYTE_CNT(speed) \
+ ((speed == FM_PORT_SPEED_10G) ? 0x1400 : 0x400)
+#define DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE \
+DEFAULT_FM_SP_BUFFER_PREFIX_CONTENT_PRIV_DATA_SIZE
+#define DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_PRS_RESULT \
+DEFAULT_FM_SP_BUFFER_PREFIX_CONTENT_PRIV_PASS_PRS_RESULT
+#define DEFAULT_PORT_BUFFER_PREFIX_CONTENT_PASS_TIME_STAMP \
+DEFAULT_FM_SP_BUFFER_PREFIX_CONTEXT_PASS_TIME_STAMP
+#define DEFAULT_PORT_BUFFER_PREFIX_CONTEXT_DATA_ALIGN \
+DEFAULT_FM_SP_BUFFER_PREFIX_CONTEXT_DATA_ALIGN
+#define DEFAULT_PORT_cheksum_last_bytes_ignore 0
+#define DEFAULT_PORT_cut_bytes_from_end 4
+
+#define DEFAULT_PORT_frm_discard_override false
+
+#define DEFAULT_PORT_FORWARD_INT_CONTENT_REUSE false
+#define DEFAULT_PORT_BUF_MARGINS_END_MAARGINS 0
+#define DEFAULT_PORT_sync_req true
+#define DEFAULT_PORT_color FM_PORT_COLOR_GREEN
+#define DEFAULT_PORT_errors_to_discard \
+FM_PORT_FRM_ERR_CLS_DISCARD
+#define DEFAULT_PORT_exception IM_EV_BSY
+#define DEFAULT_PORT_max_frame_length 9600
+
+#define DEFAULT_NOT_SUPPORTED 0xff
+
+#define DFLT_PORT_RX_FIFO_PRI_ELEVATION_LEV(bmi_max_fifo_size) \
+ MAX_PORT_FIFO_SIZE(bmi_max_fifo_size)
+
+#define DFLT_PORT_RX_FIFO_THRESHOLD(major, bmi_max_fifo_size) \
+ (major == 6 ? \
+ MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) : \
+ (MAX_PORT_FIFO_SIZE(bmi_max_fifo_size) * 3 / 4)) \
+
+#define DFLT_PORT_TX_FIFO_MIN_FILL_LEVEL 0
+#define DFLT_PORT_TX_FIFO_LOW_COMF_LEVEL (5 * 1024)
+
+/* OP - 2, 10G - 4, 1G (FMAN V3 - 2, FMAN V2 - 1) */
+#define DFLT_PORT_FIFO_DEQ_PIPELINE_DEPTH(major, type, speed) \
+ ((type == FM_PORT_TYPE_OP) ? 2 : \
+ ((speed == FM_PORT_SPEED_10G) ? 4 : \
+ ((major >= 6) ? 2 : 1)))
+
+#define DFLT_PORT_EXTRA_NUM_OF_FIFO_BUFS 0
+
+/* FMAN V3: OP - 6, 10G (RX/TX 16), 1G (RX/TX) 4
+ * FMAN V2: OP - 3, 10G (TX/TX 16), 1G (RX/TX) 3
+ */
+#define DFLT_PORT_NUM_OF_TASKS(major, type, speed) \
+ ((major >= 6) ? \
+ ((type == FM_PORT_TYPE_OP) ? 6 : \
+ ((speed == FM_PORT_SPEED_10G) ? 16 : 4)) : \
+ ((speed == FM_PORT_SPEED_10G) ? 16 : 3))
+
+/* FMAN V3: 0 for all ports
+ * FMAN V2: RX 10G - 8, RX 1G 2, TX/OP - 0
+ */
+#define DFLT_PORT_EXTRA_NUM_OF_TASKS(major, type, speed) \
+ ((major >= 6) ? 0 : \
+ ((type == FM_PORT_TYPE_RX) ? \
+ ((speed == FM_PORT_SPEED_10G) ? 8 : 2) : 0))
+
+/* FMAN V3: 10G RX - 8, 1G RX - 2, 10G TX - 12, 1G TX 3, OP - 6
+ * FMAN V2: 10G RX/TX - 8, 1G(TX/RX)/OP - 1
+ */
+#define DFLT_PORT_NUM_OF_OPEN_DMAS(major, type, speed) \
+ ((major >= 6) ? \
+ ((type == FM_PORT_TYPE_RX) ? \
+ ((speed == FM_PORT_SPEED_10G) ? 8 : 2) : \
+ ((type == FM_PORT_TYPE_TX) ? \
+ ((speed == FM_PORT_SPEED_10G) ? 12 : 3) : 4)) : \
+ ((speed == FM_PORT_SPEED_10G) ? 8 : 1))
+
+/* FMAN V3: 0 for all ports
+ * FMAN V2: RX 10G - 8, 1G RX/TX & OP - 1
+ */
+#define DFLT_PORT_EXTRA_NUM_OF_OPEN_DMAS(major, type, speed) \
+ ((major >= 6) ? 0 : \
+ ((speed == FM_PORT_SPEED_10G) ? 8 : 1))
+
+/* FMAN V3: 10G RX - 96, 10G TX 64, 1G/OP 50
+ * FMAN V2: 10G - 48, 1G RX 45, 1G TX 44, OP = 8
+ */
+#define DFLT_PORT_NUM_OF_FIFO_BUFS(major, type, speed) \
+ (major >= 6 ? \
+ (((speed == FM_PORT_SPEED_10G) ? \
+ ((type == FM_PORT_TYPE_RX) ? (96) : (64)) : (50))) : \
+ ((speed == FM_PORT_SPEED_10G) ? 48 : \
+ ((type == FM_PORT_TYPE_OP) ? 8 : \
+ ((type == FM_PORT_TYPE_RX) ? 45 : 44)))) \
+
+#define FM_PORT_MAX_NUM_OF_CONGESTION_GRPS_ALL_INTEGRATIONS 256
+
+#define FM_OH_PORT_ID 1
+
+/* Memory Mapped Registers */
+
+struct fm_port_rx_bmi_regs_t {
+ uint32_t fmbm_rcfg; /* Rx Configuration */
+ uint32_t fmbm_rst; /* Rx Status */
+ uint32_t fmbm_rda; /* Rx DMA attributes*/
+ uint32_t fmbm_rfp; /* Rx FIFO Parameters*/
+ uint32_t fmbm_rfed; /* Rx Frame End Data*/
+ uint32_t fmbm_ricp; /* Rx Internal Context Parameters*/
+ uint32_t fmbm_rim; /* Rx Internal Buffer Margins*/
+ uint32_t fmbm_rebm; /* Rx External Buffer Margins*/
+ uint32_t fmbm_rfne; /* Rx Frame Next Engine*/
+ uint32_t fmbm_rfca; /* Rx Frame Command Attributes.*/
+ uint32_t fmbm_rfpne; /* Rx Frame Parser Next Engine*/
+ uint32_t fmbm_rpso; /* Rx Parse Start Offset*/
+ uint32_t fmbm_rpp; /* Rx Policer Profile */
+ uint32_t fmbm_rccb; /* Rx Coarse Classification Base */
+ uint32_t fmbm_reth; /* Rx Excessive Threshold */
+ uint32_t reserved1[0x01];
+ /* (0x03C) */
+ uint32_t fmbm_rprai[FM_PORT_PRS_RESULT_NUM_OF_WORDS];
+ /* Rx Parse Results Array Initialization*/
+ uint32_t fmbm_rfqid; /* Rx Frame Queue ID*/
+ uint32_t fmbm_refqid; /* Rx Error Frame Queue ID*/
+ uint32_t fmbm_rfsdm; /* Rx Frame Status Discard Mask*/
+ uint32_t fmbm_rfsem; /* Rx Frame Status Error Mask*/
+ uint32_t fmbm_rfene; /* Rx Frame Enqueue Next Engine */
+ uint32_t reserved2[0x02];
+ /* (0x074-0x078) */
+ /* Rx Frame Continuous Mode Next Engine */
+ uint32_t fmbm_rcmne;
+ uint32_t reserved3[0x20];
+ /* (0x080 0x0FF) */
+ uint32_t fmbm_ebmpi[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /* Buffer Manager pool Information-*/
+ uint32_t fmbm_acnt[FM_PORT_MAX_NUM_OF_EXT_POOLS];
+ /* Allocate Counter-*/
+ uint32_t reserved4[0x08];
+ /* 0x130/0x140 - 0x15F reserved -*/
+ uint32_t
+ fmbm_rcgm[FM_PORT_MAX_NUM_OF_CONGESTION_GRPS_ALL_INTEGRATIONS / 32];
+ /* Congestion Group Map*/
+ uint32_t fmbm_rmpd; /* BM Pool Depletion */
+ uint32_t reserved5[0x1F];
+ /* (0x184 0x1FF) */
+ uint32_t fmbm_rstc; /* Rx Statistics Counters*/
+ uint32_t fmbm_rfrc; /* Rx Frame Counter*/
+ uint32_t fmbm_rfbc; /* Rx Bad Frames Counter*/
+ uint32_t fmbm_rlfc; /* Rx Large Frames Counter*/
+ uint32_t fmbm_rffc; /* Rx Filter Frames Counter*/
+ uint32_t fmbm_rfcd; /* Rx Frame Discard Counter*/
+ uint32_t fmbm_rfldec; /* Rx Frames List DMA Error Counter*/
+ uint32_t fmbm_rodc;/* Rx Out of Buffers Discard Counter-*/
+ uint32_t fmbm_rbdc; /* Rx Buffers Deallocate Counter-*/
+ uint32_t fmbm_rpec; /* Rx RX Prepare to enqueue Counter-*/
+ uint32_t reserved6[0x16];
+ /* (0x228 0x27F) */
+ uint32_t fmbm_rpc; /* Rx Performance Counters*/
+ uint32_t fmbm_rpcp; /* Rx Performance Count Parameters*/
+ uint32_t fmbm_rccn; /* Rx Cycle Counter*/
+ uint32_t fmbm_rtuc; /* Rx Tasks Utilization Counter*/
+ uint32_t fmbm_rrquc;/* Rx Receive Queue Utilization Counter*/
+ uint32_t fmbm_rduc; /* Rx DMA Utilization Counter*/
+ uint32_t fmbm_rfuc; /* Rx FIFO Utilization Counter*/
+ uint32_t fmbm_rpac; /* Rx Pause Activation Counter*/
+ uint32_t reserved7[0x18];
+ /* (0x2A0-0x2FF) */
+ uint32_t fmbm_rdcfg[0x3];
+ /* Rx Debug-*/
+ uint32_t fmbm_rgpr; /* Rx General Purpose Register. */
+ uint32_t reserved8[0x3a];
+ /* (0x310-0x3FF) */
+} __attribute__((__packed__));
+
+struct fm_port_tx_bmi_regs_t {
+ uint32_t fmbm_tcfg; /* Tx Configuration */
+ uint32_t fmbm_tst; /* Tx Status */
+ uint32_t fmbm_tda; /* Tx DMA attributes */
+ uint32_t fmbm_tfp; /* Tx FIFO Parameters */
+ uint32_t fmbm_tfed; /* Tx Frame End Data */
+ uint32_t fmbm_ticp; /* Tx Internal Context Parameters */
+ uint32_t fmbm_tfdne; /* Tx Frame Dequeue Next Engine. */
+ uint32_t fmbm_tfca; /* Tx Frame Command attribute. */
+ uint32_t fmbm_tcfqid; /* Tx Confirmation Frame Queue ID. */
+ uint32_t fmbm_tfeqid; /* Tx Frame Error Queue ID */
+ uint32_t fmbm_tfene; /* Tx Frame Enqueue Next Engine */
+ uint32_t fmbm_trlmts; /* Tx Rate Limiter Scale */
+ uint32_t fmbm_trlmt; /* Tx Rate Limiter */
+ uint32_t fmbm_tccb; /* Tx Coarse Classification Base */
+ uint32_t reserved0[0x0e];
+ /* (0x038-0x070) */
+ uint32_t fmbm_tfne; /* Tx Frame Next Engine */
+ uint32_t fmbm_tpfcm[0x02];
+ /* Tx Priority based Flow Control (PFC) Mapping */
+ /* Tx Frame Continuous Mode Next Engine */
+ uint32_t fmbm_tcmne;
+ uint32_t reserved2[0x60];
+ /* (0x080-0x200) */
+ uint32_t fmbm_tstc; /* Tx Statistics Counters */
+ uint32_t fmbm_tfrc; /* Tx Frame Counter */
+ uint32_t fmbm_tfdc; /* Tx Frames Discard Counter */
+ uint32_t fmbm_tfledc; /* Tx Frame Length error discard counter */
+ /* Tx Frame unsupported format discard Counter */
+ uint32_t fmbm_tfufdc;
+ uint32_t fmbm_tbdc; /* Tx Buffers Deallocate Counter */
+ uint32_t reserved3[0x1A];
+ /* (0x218-0x280) */
+ uint32_t fmbm_tpc; /* Tx Performance Counters*/
+ uint32_t fmbm_tpcp; /* Tx Performance Count Parameters*/
+ uint32_t fmbm_tccn; /* Tx Cycle Counter*/
+ uint32_t fmbm_ttuc; /* Tx Tasks Utilization Counter*/
+ /* Tx Transmit Confirm Queue Utilization Counter*/
+ uint32_t fmbm_ttcquc;
+ uint32_t fmbm_tduc; /* Tx DMA Utilization Counter*/
+ uint32_t fmbm_tfuc; /* Tx FIFO Utilization Counter*/
+ uint32_t reserved4[16];/* (0x29C-0x2FF) */
+ uint32_t fmbm_tdcfg[0x3];
+ /* Tx Debug-*/
+ uint32_t fmbm_tgpr; /* O/H General Purpose Register */
+ uint32_t reserved5[0x3a];
+ /* (0x310-0x3FF) */
+} __attribute__((__packed__));
+
+struct fm_port_oh_bmi_regs_t {
+ uint32_t fmbm_ocfg; /* O/H Configuration */
+ uint32_t fmbm_ost; /* O/H Status */
+ uint32_t fmbm_oda; /* O/H DMA attributes */
+ uint32_t fmbm_oicp; /* O/H Internal Context Parameters*/
+ uint32_t fmbm_ofdne; /* O/H Frame Dequeue Next Engine */
+ uint32_t fmbm_ofne; /* O/H Frame Next Engine */
+ uint32_t fmbm_ofca; /* O/H Frame Command Attributes. */
+ uint32_t fmbm_ofpne; /* O/H Frame Parser Next Engine */
+ uint32_t fmbm_opso; /* O/H Parse Start Offset */
+ uint32_t fmbm_opp; /* O/H Policer Profile */
+ uint32_t fmbm_occb; /* O/H Coarse Classification base */
+ uint32_t fmbm_oim; /* O/H Internal margins*/
+ uint32_t fmbm_ofp; /* O/H Fifo Parameters*/
+ uint32_t fmbm_ofed; /* O/H Frame End Data*/
+ uint32_t reserved0[2]; /* (0x038 - 0x03F) */
+ uint32_t fmbm_oprai[FM_PORT_PRS_RESULT_NUM_OF_WORDS];
+ /* O/H Parse Results Array Initialization */
+ uint32_t fmbm_ofqid; /* O/H Frame Queue ID */
+ uint32_t fmbm_oefqid; /* O/H Error Frame Queue ID */
+ uint32_t fmbm_ofsdm; /* O/H Frame Status Discard Mask */
+ uint32_t fmbm_ofsem; /* O/H Frame Status Error Mask */
+ uint32_t fmbm_ofene; /* O/H Frame Enqueue Next Engine */
+ uint32_t fmbm_orlmts; /* O/H Rate Limiter Scale */
+ uint32_t fmbm_orlmt; /* O/H Rate Limiter */
+ uint32_t fmbm_ocmne; /* O/H Continuous Mode Next Engine*/
+ uint32_t reserved1[0x20];
+ /* (0x080 - 0x0FF) */
+ /* Buffer Manager Observed Pool Information */
+ uint32_t fmbm_oebmpi[2];
+ uint32_t reserved2[0x16];
+ /* (0x108 - 0x15F) */
+ uint32_t fmbm_ocgm; /* Observed Congestion Group Map */
+ uint32_t reserved3[0x7];
+ /* (0x164 - 0x17F) */
+ uint32_t fmbm_ompd; /* Observed BMan Pool Depletion */
+ uint32_t reserved4[0x1F];
+ /* (0x184 - 0x1FF) */
+ uint32_t fmbm_ostc; /* O/H Statistics Counters */
+ uint32_t fmbm_ofrc; /* O/H Frame Counter */
+ uint32_t fmbm_ofdc; /* O/H Frames Discard Counter */
+ /* O/H Frames Length Error Discard Counter */
+ uint32_t fmbm_ofledc;
+ /* O/H Frames Unsupported Format Discard Counter */
+ uint32_t fmbm_ofufdc;
+ uint32_t fmbm_offc; /* O/H Filter Frames Counter */
+ uint32_t fmbm_ofwdc; /* - Rx Frames WRED Discard Counter*/
+ /* O/H Frames List DMA Error Counter */
+ uint32_t fmbm_ofldec;
+ /* O/H Buffers Deallocate Counter */
+ uint32_t fmbm_obdc;
+ /* O/H Out of Buffers Discard Counter */
+ uint32_t fmbm_oodc;
+ /* O/H Prepare to enqueue Counter */
+ uint32_t fmbm_opec;
+ uint32_t reserved5[0x15];
+ /* ( - 0x27F) */
+ uint32_t fmbm_opc; /* O/H Performance Counters */
+ uint32_t fmbm_opcp; /* O/H Performance Count Parameters*/
+ uint32_t fmbm_occn; /* O/H Cycle Counter */
+ uint32_t fmbm_otuc; /* O/H Tasks Utilization Counter */
+ uint32_t fmbm_oduc; /* O/H DMA Utilization Counter */
+ uint32_t fmbm_ofuc; /* O/H FIFO Utilization Counter */
+ uint32_t reserved6[26];/* (0x298-0x2FF) */
+ uint32_t fmbm_odcfg[0x3];
+ /* O/H Debug (only 1 in P1023) */
+ uint32_t fmbm_ogpr; /* O/H General Purpose Register. */
+ uint32_t reserved7[0x3a];
+ /* (0x310 0x3FF) */
+} __attribute__((__packed__));
+
+union fm_port_bmi_regs_u {
+ struct fm_port_rx_bmi_regs_t rx_port_bmi_regs;
+ struct fm_port_tx_bmi_regs_t tx_port_bmi_regs;
+ struct fm_port_oh_bmi_regs_t oh_port_bmi_regs;
+} __attribute__((__packed__));
+
+struct fm_port_non_rx_qmi_regs_t {
+ /* 0xn024 - 0x02B */
+ uint32_t reserved1[2];
+ /* PortID n Dequeue NIA Register */
+ uint32_t fmqm_pndn;
+ /* PortID n Dequeue Config Register */
+ uint32_t fmqm_pndc;
+ /* PortID n Dequeue Total Frame Counter */
+ uint32_t fmqm_pndtfc;
+ /* PortID n Dequeue FQID from Default Counter */
+ uint32_t fmqm_pndfdc;
+ /* PortID n Dequeue Confirm Counter */
+ uint32_t fmqm_pndcc;
+} __attribute__((__packed__));
+
+struct fm_port_qmi_regs_t {
+ /* PortID n Configuration Register */
+ uint32_t fmqm_pnc;
+ /* PortID n Status Register */
+ uint32_t fmqm_pns;
+ /* PortID n Task Status Register */
+ uint32_t fmqm_pnts;
+ /* 0xn00C - 0xn01B */
+ uint32_t reserved0[4];
+ /* PortID n Enqueue NIA Register */
+ uint32_t fmqm_pnen;
+ /* PortID n Enqueue Total Frame Counter */
+ uint32_t fmqm_pnetfc;
+ /* Registers for Tx Hc&Op ports */
+ struct fm_port_non_rx_qmi_regs_t non_rx_qmi_regs;
+} __attribute__((__packed__));
+
+/* Registers bit fields */
+
+/* BMI defines */
+#define BMI_PORT_CFG_EN 0x80000000
+#define BMI_PORT_CFG_FDOVR 0x02000000
+#define BMI_PORT_CFG_IM 0x01000000
+#define BMI_PORT_STATUS_BSY 0x80000000
+#define BMI_COUNTERS_EN 0x80000000
+
+#define BMI_PORT_RFNE_FRWD_DCL4C 0x10000000
+#define BMI_PORT_RFNE_FRWD_RPD 0x40000000
+#define BMI_RFNE_FDCS_MASK 0xFF000000
+
+#define BMI_CMD_MR_LEAC 0x00200000
+#define BMI_CMD_MR_SLEAC 0x00100000
+#define BMI_CMD_MR_MA 0x00080000
+#define BMI_CMD_MR_DEAS 0x00040000
+#define BMI_CMD_RX_MR_DEF \
+(BMI_CMD_MR_LEAC | \
+BMI_CMD_MR_SLEAC | \
+BMI_CMD_MR_MA | \
+BMI_CMD_MR_DEAS)
+#define BMI_CMD_ATTR_ORDER 0x80000000
+#define BMI_CMD_ATTR_SYNC 0x02000000
+#define BMI_CMD_ATTR_MODE_MISS_ALIGN_ADDR_EN 0x00080000
+#define BMI_CMD_ATTR_MACCMD_MASK 0x0000ff00
+#define BMI_CMD_ATTR_MACCMD_OVERRIDE 0x00008000
+#define BMI_CMD_ATTR_MACCMD_SECURED 0x00001000
+#define BMI_CMD_ATTR_MACCMD_SC_MASK 0x00000f00
+
+#define BMI_EXT_BUF_POOL_ID_MASK 0x003F0000
+#define BMI_STATUS_RX_MASK_UNUSED \
+(uint32_t)(~(FM_PORT_FRM_ERR_DMA | \
+FM_PORT_FRM_ERR_PHYSICAL | \
+FM_PORT_FRM_ERR_SIZE | \
+FM_PORT_FRM_ERR_CLS_DISCARD | \
+FM_PORT_FRM_ERR_EXTRACTION | \
+FM_PORT_FRM_ERR_NO_SCHEME | \
+FM_PORT_FRM_ERR_COLOR_RED | \
+FM_PORT_FRM_ERR_COLOR_YELLOW | \
+FM_PORT_FRM_ERR_PRS_TIMEOUT | \
+FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \
+FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED | \
+FM_PORT_FRM_ERR_PRS_HDR_ERR | \
+FM_PORT_FRM_ERR_IPRE | \
+FM_PORT_FRM_ERR_IPR_NCSP | \
+FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW))
+
+#define BMI_STATUS_OP_MASK_UNUSED \
+ (uint32_t)(BMI_STATUS_RX_MASK_UNUSED & \
+ ~(FM_PORT_FRM_ERR_LENGTH | \
+ FM_PORT_FRM_ERR_NON_FM | \
+ FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT))
+
+#define BMI_RX_FIFO_THRESHOLD_BC 0x80000000
+
+#define BMI_PRS_RESULT_HIGH 0x00000000
+#define BMI_PRS_RESULT_LOW 0xFFFFFFFF
+
+#define RX_ERRS_TO_ENQ \
+(FM_PORT_FRM_ERR_DMA | \
+FM_PORT_FRM_ERR_PHYSICAL | \
+FM_PORT_FRM_ERR_SIZE | \
+FM_PORT_FRM_ERR_EXTRACTION | \
+FM_PORT_FRM_ERR_NO_SCHEME | \
+FM_PORT_FRM_ERR_PRS_TIMEOUT | \
+FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT | \
+FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED | \
+FM_PORT_FRM_ERR_PRS_HDR_ERR | \
+FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW | \
+FM_PORT_FRM_ERR_IPRE)
+
+#define OP_ERRS_TO_ENQ \
+(RX_ERRS_TO_ENQ | \
+FM_PORT_FRM_ERR_LENGTH | \
+FM_PORT_FRM_ERR_NON_FM | \
+FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT)
+
+#define BMI_RX_FIFO_PRI_ELEVATION_MASK 0x03FF0000
+#define BMI_RX_FIFO_THRESHOLD_MASK 0x000003FF
+#define BMI_TX_FIFO_MIN_FILL_MASK 0x03FF0000
+#define BMI_FIFO_PIPELINE_DEPTH_MASK 0x0000F000
+#define BMI_TX_LOW_COMF_MASK 0x000003FF
+
+/* shifts */
+#define BMI_PORT_CFG_MS_SEL_SHIFT 16
+#define BMI_DMA_ATTR_IC_CACHE_SHIFT FMAN_SP_DMA_ATTR_IC_CACHE_SHIFT
+#define BMI_DMA_ATTR_HDR_CACHE_SHIFT FMAN_SP_DMA_ATTR_HDR_CACHE_SHIFT
+#define BMI_DMA_ATTR_SG_CACHE_SHIFT FMAN_SP_DMA_ATTR_SG_CACHE_SHIFT
+
+#define BMI_IM_FOF_SHIFT 28
+#define BMI_PR_PORTID_SHIFT 24
+
+#define BMI_RX_FIFO_PRI_ELEVATION_SHIFT 16
+#define BMI_RX_FIFO_THRESHOLD_SHIFT 0
+
+#define BMI_RX_FRAME_END_CS_IGNORE_SHIFT 24
+#define BMI_RX_FRAME_END_CUT_SHIFT 16
+
+#define BMI_IC_SIZE_SHIFT FMAN_SP_IC_SIZE_SHIFT
+
+#define BMI_INT_BUF_MARG_SHIFT 28
+
+#define BMI_EXT_BUF_MARG_END_SHIFT FMAN_SP_EXT_BUF_MARG_END_SHIFT
+
+#define BMI_CMD_ATTR_COLOR_SHIFT 26
+#define BMI_CMD_ATTR_COM_MODE_SHIFT 16
+#define BMI_CMD_ATTR_MACCMD_SHIFT 8
+#define BMI_CMD_ATTR_MACCMD_OVERRIDE_SHIFT 15
+#define BMI_CMD_ATTR_MACCMD_SECURED_SHIFT 12
+#define BMI_CMD_ATTR_MACCMD_SC_SHIFT 8
+
+#define BMI_POOL_DEP_NUM_OF_POOLS_VECTOR_SHIFT 24
+
+#define BMI_TX_FIFO_MIN_FILL_SHIFT 16
+#define BMI_TX_LOW_COMF_SHIFT 0
+
+#define BMI_PERFORMANCE_TASK_COMP_SHIFT 24
+#define BMI_PERFORMANCE_PORT_COMP_SHIFT 16
+#define BMI_PERFORMANCE_DMA_COMP_SHIFT 12
+#define BMI_PERFORMANCE_FIFO_COMP_SHIFT 0
+
+#define BMI_MAX_BURST_SHIFT 16
+#define BMI_COUNT_RATE_UNIT_SHIFT 16
+
+/* sizes */
+#define FRAME_END_DATA_SIZE 16
+#define FRAME_OFFSET_UNITS 16
+#define MIN_TX_INT_OFFSET 16
+#define MAX_FRAME_OFFSET 64
+#define MAX_FIFO_PIPELINE_DEPTH 8
+#define MAX_PERFORMANCE_TASK_COMP 64
+#define MAX_PERFORMANCE_TX_QUEUE_COMP 8
+#define MAX_PERFORMANCE_RX_QUEUE_COMP 64
+#define MAX_PERFORMANCE_DMA_COMP 16
+#define MAX_NUM_OF_TASKS 64
+#define MAX_NUM_OF_EXTRA_TASKS 8
+#define MAX_NUM_OF_DMAS 16
+#define MAX_NUM_OF_EXTRA_DMAS 8
+#define MAX_BURST_SIZE 1024
+#define MIN_NUM_OF_OP_DMAS 2
+
+/* QMI defines */
+/* masks */
+#define QMI_PORT_CFG_EN 0x80000000
+#define QMI_PORT_CFG_EN_COUNTERS 0x10000000
+#define QMI_PORT_STATUS_DEQ_TNUM_BSY 0x80000000
+#define QMI_PORT_STATUS_DEQ_FD_BSY 0x20000000
+
+#define QMI_DEQ_CFG_PREFETCH_NO_TNUM 0x02000000
+#define QMI_DEQ_CFG_PREFETCH_WAITING_TNUM 0
+#define QMI_DEQ_CFG_PREFETCH_1_FRAME 0
+#define QMI_DEQ_CFG_PREFETCH_3_FRAMES 0x01000000
+
+#define QMI_DEQ_CFG_PRI 0x80000000
+#define QMI_DEQ_CFG_TYPE1 0x10000000
+#define QMI_DEQ_CFG_TYPE2 0x20000000
+#define QMI_DEQ_CFG_TYPE3 0x30000000
+
+#define QMI_DEQ_CFG_SUBPORTAL_MASK 0x1f
+#define QMI_DEQ_CFG_SUBPORTAL_SHIFT 20
+
+/* PARSER defines */
+/* masks */
+#define PRS_HDR_ERROR_DIS 0x00000800
+#define PRS_HDR_SW_PRS_EN 0x00000400
+#define PRS_CP_OFFSET_MASK 0x0000000F
+#define PRS_TPID1_MASK 0xFFFF0000
+#define PRS_TPID2_MASK 0x0000FFFF
+#define PRS_TPID_DFLT 0x91009100
+
+#define PRS_HDR_MPLS_LBL_INTER_EN 0x00200000
+#define PRS_HDR_IPV6_ROUTE_HDR_EN 0x00008000
+#define PRS_HDR_PPPOE_MTU_CHECK_EN 0x80000000
+#define PRS_HDR_UDP_PAD_REMOVAL 0x80000000
+#define PRS_HDR_TCP_PAD_REMOVAL 0x80000000
+#define PRS_CAC_STOP 0x00000001
+#define PRS_CAC_ACTIVE 0x00000100
+
+/* shifts */
+#define PRS_PCTPID_SHIFT 16
+#define PRS_HDR_MPLS_NEXT_HDR_SHIFT 22
+#define PRS_HDR_ETH_BC_SHIFT 28
+#define PRS_HDR_ETH_MC_SHIFT 24
+#define PRS_HDR_VLAN_STACKED_SHIFT 16
+#define PRS_HDR_MPLS_STACKED_SHIFT 16
+#define PRS_HDR_IPV4_1_BC_SHIFT 28
+#define PRS_HDR_IPV4_1_MC_SHIFT 24
+#define PRS_HDR_IPV4_2_UC_SHIFT 20
+#define PRS_HDR_IPV4_2_MC_BC_SHIFT 16
+#define PRS_HDR_IPV6_1_MC_SHIFT 24
+#define PRS_HDR_IPV6_2_UC_SHIFT 20
+#define PRS_HDR_IPV6_2_MC_SHIFT 16
+
+#define PRS_HDR_ETH_BC_MASK 0x0fffffff
+#define PRS_HDR_ETH_MC_MASK 0xf0ffffff
+#define PRS_HDR_VLAN_STACKED_MASK 0xfff0ffff
+#define PRS_HDR_MPLS_STACKED_MASK 0xfff0ffff
+#define PRS_HDR_IPV4_1_BC_MASK 0x0fffffff
+#define PRS_HDR_IPV4_1_MC_MASK 0xf0ffffff
+#define PRS_HDR_IPV4_2_UC_MASK 0xff0fffff
+#define PRS_HDR_IPV4_2_MC_BC_MASK 0xfff0ffff
+#define PRS_HDR_IPV6_1_MC_MASK 0xf0ffffff
+#define PRS_HDR_IPV6_2_UC_MASK 0xff0fffff
+#define PRS_HDR_IPV6_2_MC_MASK 0xfff0ffff
+
+/* others */
+#define PRS_HDR_ENTRY_SIZE 8
+#define DEFAULT_CLS_PLAN_VECTOR 0xFFFFFFFF
+
+#define IPSEC_SW_PATCH_START 0x20
+#define SCTP_SW_PATCH_START 0x4D
+#define DCCP_SW_PATCH_START 0x41
+
+/* Additional defines */
+
+struct fm_port_drv_param_t {
+ struct fman_port_cfg dflt_cfg;
+ uint32_t dflt_fqid;
+ uint32_t err_fqid;
+ uintptr_t base_addr;
+ uint8_t deq_sub_portal;
+ bool deq_high_priority;
+ enum fm_port_deq_type deq_type;
+ enum fm_port_deq_prefetch_option deq_prefetch_option;
+ uint16_t deq_byte_cnt;
+ uint8_t cheksum_last_bytes_ignore;
+ uint8_t cut_bytes_from_end;
+ struct fm_buf_pool_depletion_t buf_pool_depletion;
+ bool frm_discard_override;
+ bool en_buf_pool_depletion;
+ uint16_t liodn_offset;
+ uint16_t liodn_base;
+ struct fm_ext_pools_t ext_buf_pools;
+ enum fm_dma_swap_option dma_swap_data;
+ uint32_t tx_fifo_min_fill_level;
+ uint32_t tx_fifo_low_comf_level;
+ uint32_t rx_fifo_pri_elevation_level;
+ uint32_t rx_fifo_threshold;
+ struct fm_sp_buf_margins_t buf_margins;
+ struct fm_sp_int_context_data_copy_t int_context;
+ bool sync_req;
+ enum fm_port_color color;
+ uint32_t errors_to_discard;
+ uint32_t errors_to_enq;
+ bool forward_reuse_int_context;
+ struct fm_buffer_prefix_content_t buffer_prefix_content;
+ struct fm_backup_bm_pools_t *p_backup_bm_pools;
+ bool dont_release_buf;
+ bool set_num_of_tasks;
+ bool set_num_of_open_dmas;
+ bool set_size_of_fifo;
+
+#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
+ bool bcb_workaround;
+#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
+};
+
+struct fm_port_rx_pools_params_t {
+ uint8_t num_of_pools;
+ uint16_t second_largest_buf_size;
+ uint16_t largest_buf_size;
+};
+
+struct fm_port_intg_t {
+ uint32_t max_port_fifo_size;
+ uint32_t max_num_of_ext_pools;
+ uint32_t fm_max_num_of_sub_portals;
+ uint32_t bm_max_num_of_pools;
+};
+
+/* No PCD Engine indicated */
+#define FM_PCD_NONE 0
+struct fm_port_t {
+ struct fman_port port;
+ void *h_fm;
+ struct fm_revision_info_t fm_rev_info;
+ uint8_t port_id;
+ enum fm_port_type port_type;
+ enum fm_port_speed port_speed;
+ int enabled;
+ char name[MODULE_NAME_SIZE];
+ uint16_t fm_clk_freq;
+ struct fm_port_qmi_regs_t __iomem *p_fm_port_qmi_regs;
+
+ union fm_port_bmi_regs_u __iomem *p_fm_port_bmi_regs;
+ /* The optional engines are devined avobe */
+ uint32_t saved_bmi_nia;
+ uint8_t private_info;
+ struct fm_sp_buffer_offsets_t buffer_offsets;
+
+ volatile bool lock;
+ /* Spinlock for port use */
+ spinlock_t *spinlock;
+ fm_port_exception_cb *f_exception;
+ void *h_app;
+ uint8_t internal_buf_offset;
+ uint32_t exceptions;
+ bool polling;
+ struct fm_ext_pools_t ext_buf_pools;
+ uint32_t required_action;
+ uint32_t saved_qmi_pnen;
+ uint32_t saved_bmi_fene;
+ uint32_t saved_bmi_fpne;
+ uint32_t saved_bmi_cmne;
+ uint32_t saved_non_rx_qmi_regs_pndn;
+ uint32_t orig_non_rx_qmi_regs_pndn;
+ bool include_in_prs_statistics;
+ uint16_t max_frame_length;
+ uint32_t or_fman_ctrl;
+ struct fm_port_rsrc_t open_dmas;
+ struct fm_port_rsrc_t tasks;
+ struct fm_port_rsrc_t fifo_bufs;
+ struct fm_port_rx_pools_params_t rx_pools_params;
+
+ struct fm_port_drv_param_t *p_fm_port_drv_param;
+
+ struct fm_port_intg_t *port_intg;
+
+};
+
+#endif /* __FM_PORT_H */
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists