[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1432645679-4759-1-git-send-email-dmurphy@ti.com>
Date: Tue, 26 May 2015 08:07:59 -0500
From: Dan Murphy <dmurphy@...com>
To: <netdev@...r.kernel.org>
CC: <f.fainelli@...il.com>, Dan Murphy <dmurphy@...com>
Subject: [PATCH] net: phy: dp83867: Add TI dp83867 phy
Add support for the TI dp83867 Gigabit ethernet phy
device.
The DP83867 is a robust, low power, fully featured
Physical Layer transceiver with integrated PMD
sublayers to support 10BASE-T, 100BASE-TX and
1000BASE-T Ethernet protocols.
Signed-off-by: Dan Murphy <dmurphy@...com>
---
drivers/net/phy/Kconfig | 6 +-
drivers/net/phy/Makefile | 1 +
drivers/net/phy/dp83867.c | 208 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 214 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/phy/dp83867.c
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 70641d2..939f06e 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -119,6 +119,11 @@ config MICREL_PHY
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
+config DP83867_PHY
+ tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
+ ---help---
+ Currently supports the DP83867 PHY.
+
config FIXED_PHY
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
@@ -212,7 +217,6 @@ config MDIO_BCM_UNIMAC
This hardware can be found in the Broadcom GENET Ethernet MAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
-
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 501ea76..58e6131 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
+obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
new file mode 100644
index 0000000..cc8466b
--- /dev/null
+++ b/drivers/net/phy/dp83867.c
@@ -0,0 +1,208 @@
+/*
+ * Driver for the Texas Instruments DP83867 PHY
+ *
+ * Copyright (C) 2015 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define DP83867_PHY_ID 0x2000a231
+#define DP83867_DEVADDR 0x1f
+
+#define MII_DP83867_PHYCTRL 0x10
+#define MII_DP83867_MICR 0x12
+#define MII_DP83867_ISR 0x13
+#define DP83867_CTRL 0x1f
+
+/* Extended Registers */
+#define DP83867_RGMIICTL 0x0032
+#define DP83867_RGMIIDCTL 0x0086
+
+#define DP83867_SW_RESET BIT(15)
+#define DP83867_SW_RESTART BIT(14)
+
+/* MICR Interrupt bits */
+#define MII_DP83867_MICR_AN_ERR_INT_EN BIT(15)
+#define MII_DP83867_MICR_SPEED_CHNG_INT_EN BIT(14)
+#define MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN BIT(13)
+#define MII_DP83867_MICR_PAGE_RXD_INT_EN BIT(12)
+#define MII_DP83867_MICR_AUTONEG_COMP_INT_EN BIT(11)
+#define MII_DP83867_MICR_LINK_STS_CHNG_INT_EN BIT(10)
+#define MII_DP83867_MICR_FALSE_CARRIER_INT_EN BIT(8)
+#define MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN BIT(4)
+#define MII_DP83867_MICR_WOL_INT_EN BIT(3)
+#define MII_DP83867_MICR_XGMII_ERR_INT_EN BIT(2)
+#define MII_DP83867_MICR_POL_CHNG_INT_EN BIT(1)
+#define MII_DP83867_MICR_JABBER_INT_EN BIT(0)
+
+/* RGMIICTL bits */
+#define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1)
+#define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0)
+
+/* PHY CTRL bits */
+#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
+#define DP83867_PHYCR_FIFO_DEPTH_3_B_NIB 0x00
+#define DP83867_PHYCR_FIFO_DEPTH_4_B_NIB 0x01
+#define DP83867_PHYCR_FIFO_DEPTH_6_B_NIB 0x02
+#define DP83867_PHYCR_FIFO_DEPTH_8_B_NIB 0x03
+
+/* RGMIIDCTL bits */
+#define DP83867_RGMII_RX_CLK_DELAY_SHIFT 4
+enum {
+ DP83867_RGMIIDCTL_250_PS,
+ DP83867_RGMIIDCTL_500_PS,
+ DP83867_RGMIIDCTL_750_PS,
+ DP83867_RGMIIDCTL_1_NS,
+ DP83867_RGMIIDCTL_1_25_NS,
+ DP83867_RGMIIDCTL_1_50_NS,
+ DP83867_RGMIIDCTL_1_75_NS,
+ DP83867_RGMIIDCTL_2_00_NS,
+ DP83867_RGMIIDCTL_2_25_NS,
+ DP83867_RGMIIDCTL_2_50_NS,
+ DP83867_RGMIIDCTL_2_75_NS,
+ DP83867_RGMIIDCTL_3_00_NS,
+ DP83867_RGMIIDCTL_3_25_NS,
+ DP83867_RGMIIDCTL_3_50_NS,
+ DP83867_RGMIIDCTL_3_75_NS,
+ DP83867_RGMIIDCTL_4_00_NS,
+};
+
+int rx_tx_delay = (DP83867_RGMIIDCTL_2_75_NS << DP83867_RGMII_RX_CLK_DELAY_SHIFT) | DP83867_RGMIIDCTL_2_25_NS;
+module_param(rx_tx_delay, int, 0664);
+
+
+static int dp83867_ack_interrupt(struct phy_device *phydev)
+{
+ int err = phy_read(phydev, MII_DP83867_ISR);
+
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int dp83867_config_intr(struct phy_device *phydev)
+{
+ int micr_status;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+ micr_status = phy_read(phydev, MII_DP83867_MICR);
+ if (micr_status < 0)
+ return micr_status;
+
+ micr_status |=
+ (MII_DP83867_MICR_AN_ERR_INT_EN |
+ MII_DP83867_MICR_SPEED_CHNG_INT_EN |
+ MII_DP83867_MICR_DUP_MODE_CHNG_INT_EN |
+ MII_DP83867_MICR_SLEEP_MODE_CHNG_INT_EN);
+
+ return phy_write(phydev, MII_DP83867_MICR, micr_status);
+ }
+
+ micr_status = 0x0;
+ return phy_write(phydev, MII_DP83867_MICR, micr_status);
+}
+
+static int dp83867_config_init(struct phy_device *phydev)
+{
+ int val;
+
+ if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID))
+ phy_write(phydev, MII_DP83867_PHYCTRL,
+ (DP83867_PHYCR_FIFO_DEPTH_4_B_NIB << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
+
+ if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
+ val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
+ DP83867_DEVADDR, phydev->addr);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ val |= DP83867_RGMII_TX_CLK_DELAY_EN;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ val |= DP83867_RGMII_RX_CLK_DELAY_EN;
+
+ phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
+ DP83867_DEVADDR, phydev->addr, val);
+
+ phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
+ DP83867_DEVADDR, phydev->addr, rx_tx_delay);
+ }
+
+ return 0;
+}
+
+static int dp83867_phy_reset(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
+ if (err < 0)
+ return err;
+
+ err = dp83867_config_init(phydev);
+ return err;
+}
+
+static struct phy_driver dp83867_driver = {
+ .phy_id = DP83867_PHY_ID,
+ .phy_id_mask = 0xfffffff0,
+ .name = "TI DP83867",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+
+ .config_init = dp83867_config_init,
+ .soft_reset = dp83867_phy_reset,
+
+ /* IRQ related */
+ .ack_interrupt = dp83867_ack_interrupt,
+ .config_intr = dp83867_config_intr,
+
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+
+ .driver = {.owner = THIS_MODULE,}
+};
+
+static int __init dp83867_init(void)
+{
+ return phy_driver_register(&dp83867_driver);
+}
+
+static void __exit dp83867_exit(void)
+{
+ phy_driver_unregister(&dp83867_driver);
+}
+
+module_init(dp83867_init);
+module_exit(dp83867_exit);
+
+static struct mdio_device_id __maybe_unused dp83867_tbl[] = {
+ { DP83867_PHY_ID, 0xfffffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, dp83867_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83867 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@...com");
+MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists