netdev - [PATCH 11/16] batman-adv: Use safer default config for optional features

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1432890328-8247-12-git-send-email-antonio@meshcoding.com>
Date:	Fri, 29 May 2015 11:05:23 +0200
From:	Antonio Quartulli <antonio@...hcoding.com>
To:	davem@...emloft.net
Cc:	netdev@...r.kernel.org, b.a.t.m.a.n@...ts.open-mesh.org,
	Sven Eckelmann <sven@...fation.org>,
	Marek Lindner <mareklindner@...mailbox.ch>,
	Antonio Quartulli <antonio@...hcoding.com>
Subject: [PATCH 11/16] batman-adv: Use safer default config for optional features

From: Sven Eckelmann <sven@...fation.org>

The current default settings for optional features in batman-adv seems to
be based around the idea that the user only compiles what he requires. They
will automatically enabled when they are compiled in. For example the
network coding part of batman-adv is by default disabled in the out-of-tree
module but will be enabled when the code is compiled during the module
build.

But distributions like Debian just enable all features of the batman-adv
kernel module and hope that more experimental features or features with
possible negative effects have to be enabled using some runtime
configuration interface.

The network_coding feature can help in specific setups but also has
drawbacks and is not disabled by default in the out-of-tree module.
Disabling by default in the runtime config seems to be also quite sane.

The bridge_loop_avoidance is the only feature which is disabled by default
but may be necessary even in simple setups. Packet loops may even be
created during the initial node setup when this is not enabled. This is
different than STP on bridges because mesh is usually used on Adhoc WiFi.
Having two nodes (by accident) in the same LAN segment and in the same mesh
network is rather common in this situation.

Signed-off-by: Sven Eckelmann <sven@...fation.org>
Acked-by: Martin Hundebøll <martin@...deboll.net>
Signed-off-by: Marek Lindner <mareklindner@...mailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@...hcoding.com>
---
 net/batman-adv/network-coding.c | 2 +-
 net/batman-adv/soft-interface.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c
index 89e1d47..4cb70bb 100644
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -155,7 +155,7 @@ err:
  */
 void batadv_nc_init_bat_priv(struct batadv_priv *bat_priv)
 {
-	atomic_set(&bat_priv->network_coding, 1);
+	atomic_set(&bat_priv->network_coding, 0);
 	bat_priv->nc.min_tq = 200;
 	bat_priv->nc.max_fwd_delay = 10;
 	bat_priv->nc.max_buffer_time = 200;
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index d85a45c..9426b83 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -732,7 +732,7 @@ static int batadv_softif_init_late(struct net_device *dev)
 	atomic_set(&bat_priv->aggregated_ogms, 1);
 	atomic_set(&bat_priv->bonding, 0);
 #ifdef CONFIG_BATMAN_ADV_BLA
-	atomic_set(&bat_priv->bridge_loop_avoidance, 0);
+	atomic_set(&bat_priv->bridge_loop_avoidance, 1);
 #endif
 #ifdef CONFIG_BATMAN_ADV_DAT
 	atomic_set(&bat_priv->distributed_arp_table, 1);
-- 
2.4.2

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html