[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1433183947-13095-6-git-send-email-sfeldma@gmail.com>
Date: Mon, 1 Jun 2015 11:39:06 -0700
From: sfeldma@...il.com
To: netdev@...r.kernel.org
Cc: jiri@...nulli.us, simon.horman@...ronome.com
Subject: [PATCH net-next 5/5] rocker: remove support for legacy VLAN ndo ops
From: Scott Feldman <sfeldma@...il.com>
Remove support for legacy ndo ops
.ndo_vlan_rx_add_vid/.ndo_vlan_rx_kill_vid. Rocker will use
bridge_setlink/dellink exclusively for VLAN add/del operations.
The legacy ops are needed if using 8021q driver module to setup VLANs on
the port. But an alternative exists in using bridge_setlink/delink to
setup VLANs, which doesn't depend on 8021q module. So rocker will switch
to the newer setlink/dellink ops. VLANs can added/delete from the port,
regardless if port is bridged or not, using the bridge commands:
bridge vlan [add|del] vid VID dev DEV self
(Yes, I agree it's confusing to use the "bridge" command to set a VLAN on a
non-bridged port).
Using setlink/dellink over legacy ops let's us handle the stacked driver
case automatically. It's built-in. setlink also pass additional flags
(PVID, egress untagged) that aren't available with the legacy ops.
Signed-off-by: Scott Feldman <sfeldma@...il.com>
---
drivers/net/ethernet/rocker/rocker.c | 34 +---------------------------------
1 file changed, 1 insertion(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c
index 3eb3eba..e3fb97a 100644
--- a/drivers/net/ethernet/rocker/rocker.c
+++ b/drivers/net/ethernet/rocker/rocker.c
@@ -4185,35 +4185,6 @@ static int rocker_port_set_mac_address(struct net_device *dev, void *p)
return 0;
}
-static int rocker_port_vlan_rx_add_vid(struct net_device *dev,
- __be16 proto, u16 vid)
-{
- struct rocker_port *rocker_port = netdev_priv(dev);
- int err;
-
- err = rocker_port_vlan(rocker_port, SWITCHDEV_TRANS_NONE, 0, vid);
- if (err)
- return err;
-
- return rocker_port_router_mac(rocker_port, SWITCHDEV_TRANS_NONE,
- 0, htons(vid));
-}
-
-static int rocker_port_vlan_rx_kill_vid(struct net_device *dev,
- __be16 proto, u16 vid)
-{
- struct rocker_port *rocker_port = netdev_priv(dev);
- int err;
-
- err = rocker_port_router_mac(rocker_port, SWITCHDEV_TRANS_NONE,
- ROCKER_OP_FLAG_REMOVE, htons(vid));
- if (err)
- return err;
-
- return rocker_port_vlan(rocker_port, SWITCHDEV_TRANS_NONE,
- ROCKER_OP_FLAG_REMOVE, vid);
-}
-
static int rocker_port_get_phys_port_name(struct net_device *dev,
char *buf, size_t len)
{
@@ -4235,8 +4206,6 @@ static const struct net_device_ops rocker_port_netdev_ops = {
.ndo_stop = rocker_port_stop,
.ndo_start_xmit = rocker_port_xmit,
.ndo_set_mac_address = rocker_port_set_mac_address,
- .ndo_vlan_rx_add_vid = rocker_port_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = rocker_port_vlan_rx_kill_vid,
.ndo_bridge_getlink = switchdev_port_bridge_getlink,
.ndo_bridge_setlink = switchdev_port_bridge_setlink,
.ndo_bridge_dellink = switchdev_port_bridge_dellink,
@@ -4908,8 +4877,7 @@ static int rocker_probe_port(struct rocker *rocker, unsigned int port_number)
NAPI_POLL_WEIGHT);
rocker_carrier_init(rocker_port);
- dev->features |= NETIF_F_NETNS_LOCAL |
- NETIF_F_HW_VLAN_CTAG_FILTER;
+ dev->features |= NETIF_F_NETNS_LOCAL;
err = register_netdev(dev);
if (err) {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists