[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGnW=BYMCXAu8f6TgiXCPB11ufKrKdt5wH0VhUH1x8oYkvtZ9g@mail.gmail.com>
Date: Mon, 15 Jun 2015 17:17:22 +0530
From: punnaiah choudary kalluri <punnaia@...inx.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, Punnaiah Choudary <kpc528@...il.com>,
punnaiah choudary kalluri <kalluripunnaiahchoudary@...il.com>,
appanad@...inx.com
Subject: Re: Support for Ethernet Phy interfaced through i2c bus
Any inputs on this ?
Regards,
Punnaiah
On Tue, May 26, 2015 at 9:23 PM, punnaiah choudary kalluri
<punnaia@...inx.com> wrote:
> Hi,
>
> I have a design for adding the sgmii support to the Ethernet mac.
> The Ethernet mac is interfaced to the SGMII core and the mdio interface
> from the mac is connected to the sgmii core for querying the link status
> and autonegotaiation status.
> The external phy is connected to the i2c bus and it is accessed through
> i2c controller.
>
> I have tested this design with out registering phy framework and configured
> the external phy using the i2c lib and modified the Ethernet driver to include
> code for accessing the sgmii core using the mdio interface.
>
> Now i am looking for a solution to implement the following requirement using the
> existing phy framework. But it looks the current phy framework is using only
> the mdio bus.
>
> Could some one suggest the better approach or solution for
> implementing the below
> requirement.
>
>
> --------
> | | I2C
> | I2c |----------------
> | ctrl| | |
> --------- |
> ---------- | -----------
> | | -------------------------------- | |
> | MAC | | |
> | | MDIO ------------ TX/RX | PHY |
> | |---------------- | |---------------- | |
> | | GMII | SGMII | | |
> | | --------------- | | -----------
> ---------- | |
> ----------
> Regards,
> Punnaiah
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists