| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150624080438-mutt-send-email-mst@redhat.com>
Date: Wed, 24 Jun 2015 08:10:37 +0200
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Julio Faracco <jcfaracco@...il.com>
Cc: linux-kernel@...r.kernel.org, rusty@...tcorp.com.au,
virtualization@...ts.linux-foundation.org, netdev@...r.kernel.org,
Jason Wang <jasowang@...hat.com>
Subject: Re: [RFC] virtio_net: Adding tx_timeout function.
On Tue, Jun 23, 2015 at 10:44:29PM -0300, Julio Faracco wrote:
> virtio_net paravirtualized driver does not have a tx_timeout() function to
> guarantee that the driver will recover properly after receiving a timeout
> during a transmission of a packet. This patch add this feature and throw a
> timeout exception after 5 HZ. Considering some tests, this is the best
> time to use here.
>
> Signed-off-by: Julio Faracco <jcfaracco@...il.com>
> Cc: Jason Wang <jasowang@...hat.com>
Looks like a bunch of locks and flushes are missing in this patch. IMHO
that's just too painful with current hardware. IMO the right thing to
do here is to add ability to reset specific queues to hardware.
> ---
> drivers/net/virtio_net.c | 69 +++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 68 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 63c7810..75ac45c 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -135,6 +135,9 @@ struct virtnet_info {
> /* Work struct for config space updates */
> struct work_struct config_work;
>
> + /* Work struct for resetting the virtio-net driver. */
> + struct work_struct reset_task;
> +
> /* Does the affinity hint is set for virtqueues? */
> bool affinity_hint_set;
>
> @@ -1394,6 +1397,18 @@ static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
> return 0;
> }
>
> +static void virtnet_tx_timeout(struct net_device *dev)
> +{
> + struct virtnet_info *vi = netdev_priv(dev);
> +
> + dev_warn(&dev->dev, "TX Timeout exception with latency: %ld\n",
> + jiffies - dev_trans_start(dev));
> +
> + schedule_work(&vi->reset_task);
What if after this triggers user does something
to the device (e.g. attempts to remove it)?
Or if a packet is transmitted or used?
> +}
> +
> +static void virtnet_reset_task(struct work_struct *work);
> +
> static const struct net_device_ops virtnet_netdev = {
> .ndo_open = virtnet_open,
> .ndo_stop = virtnet_close,
> @@ -1405,6 +1420,7 @@ static const struct net_device_ops virtnet_netdev = {
> .ndo_get_stats64 = virtnet_stats,
> .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
> .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
> + .ndo_tx_timeout = virtnet_tx_timeout,
> #ifdef CONFIG_NET_POLL_CONTROLLER
> .ndo_poll_controller = virtnet_netpoll,
> #endif
> @@ -1750,6 +1766,7 @@ static int virtnet_probe(struct virtio_device *vdev)
> dev->netdev_ops = &virtnet_netdev;
> dev->features = NETIF_F_HIGHDMA;
>
> + dev->watchdog_timeo = 5 * HZ;
> dev->ethtool_ops = &virtnet_ethtool_ops;
> SET_NETDEV_DEV(dev, &vdev->dev);
>
> @@ -1811,6 +1828,7 @@ static int virtnet_probe(struct virtio_device *vdev)
> }
>
> INIT_WORK(&vi->config_work, virtnet_config_changed_work);
> + INIT_WORK(&vi->reset_task, virtnet_reset_task);
>
> /* If we can receive ANY GSO packets, we must allocate large ones. */
> if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
> @@ -1891,7 +1909,7 @@ static int virtnet_probe(struct virtio_device *vdev)
> netif_carrier_on(dev);
> }
>
> - pr_debug("virtnet: registered device %s with %d RX and TX vq's\n",
> + pr_debug("virtio_net: registered device %s with %d RX and TX vq's\n",
> dev->name, max_queue_pairs);
>
> return 0;
> @@ -2001,6 +2019,55 @@ static int virtnet_restore(struct virtio_device *vdev)
> }
> #endif
>
> +static void virtnet_reset_task(struct work_struct *work)
> +{
> + struct virtnet_info *vi =
> + container_of(work, struct virtnet_info, reset_task);
> + struct net_device *dev = vi->dev;
> + struct virtio_device *vdev = vi->vdev;
> + int err, i;
> +
> + flush_work(&vi->config_work);
> +
> + netif_device_detach(vi->dev);
> + cancel_delayed_work_sync(&vi->refill);
> +
> + if (netif_running(vi->dev)) {
> + for (i = 0; i < vi->max_queue_pairs; i++) {
> + napi_disable(&vi->rq[i].napi);
> + napi_hash_del(&vi->rq[i].napi);
> + netif_napi_del(&vi->rq[i].napi);
> + }
> + }
> +
> + remove_vq_common(vi);
> +
> + dev->stats.tx_errors++;
> +
> + err = init_vqs(vi);
> + if (err) {
> + dev_warn(&dev->dev, "virtio_net: virtqueue initialization failed.\n");
> + return;
> + }
> +
> + virtio_device_ready(vdev);
> +
> + if (netif_running(vi->dev)) {
> + for (i = 0; i < vi->curr_queue_pairs; i++)
> + if (!try_fill_recv(vi, &vi->rq[i], GFP_KERNEL))
> + schedule_delayed_work(&vi->refill, 0);
> +
> + for (i = 0; i < vi->max_queue_pairs; i++)
> + virtnet_napi_enable(&vi->rq[i]);
> + }
> +
> + netif_device_attach(vi->dev);
> +
> + rtnl_lock();
> + virtnet_set_queues(vi, vi->curr_queue_pairs);
> + rtnl_unlock();
Won't this lose a bunch of state, like mac addresses,
multicast, rx mode, etc etc?
> +}
> +
> static struct virtio_device_id id_table[] = {
> { VIRTIO_ID_NET, VIRTIO_DEV_ANY_ID },
> { 0 },
> --
> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists