| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1435234769-5625-3-git-send-email-Yuval.Mintz@qlogic.com>
Date: Thu, 25 Jun 2015 15:19:22 +0300
From: Yuval Mintz <Yuval.Mintz@...gic.com>
To: <davem@...emloft.net>, <netdev@...r.kernel.org>
CC: <Ariel.Elior@...gic.com>, Yuval Mintz <Yuval.Mintz@...gic.com>,
Yaniv Rosner <Yaniv.Rosner@...gic.com>
Subject: [PATCH net 2/9] bnx2x: Correct speed from baseT into KR.
ethtool shows KR supported/advertised speeds incorrectly as baseT
in cases the board is in fact KR-base.
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@...gic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@...gic.com>
---
.../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 55 ++++++++++++++++------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 13 +++++
3 files changed, 59 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 48ed005..733b0fc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -257,14 +257,15 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2x *bp = netdev_priv(dev);
int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+ u32 media_type;
/* Dual Media boards present all available port types */
cmd->supported = bp->port.supported[cfg_idx] |
(bp->port.supported[cfg_idx ^ 1] &
(SUPPORTED_TP | SUPPORTED_FIBRE));
cmd->advertising = bp->port.advertising[cfg_idx];
- if (bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type ==
- ETH_PHY_SFP_1G_FIBER) {
+ media_type = bp->link_params.phy[bnx2x_get_cur_phy_idx(bp)].media_type;
+ if (media_type == ETH_PHY_SFP_1G_FIBER) {
cmd->supported &= ~(SUPPORTED_10000baseT_Full);
cmd->advertising &= ~(ADVERTISED_10000baseT_Full);
}
@@ -312,12 +313,26 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->lp_advertising |= ADVERTISED_100baseT_Full;
if (status & LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_1000baseT_Half;
- if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE)
- cmd->lp_advertising |= ADVERTISED_1000baseT_Full;
+ if (status & LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE) {
+ if (media_type == ETH_PHY_KR) {
+ cmd->lp_advertising |=
+ ADVERTISED_1000baseKX_Full;
+ } else {
+ cmd->lp_advertising |=
+ ADVERTISED_1000baseT_Full;
+ }
+ }
if (status & LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_2500baseX_Full;
- if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE)
- cmd->lp_advertising |= ADVERTISED_10000baseT_Full;
+ if (status & LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE) {
+ if (media_type == ETH_PHY_KR) {
+ cmd->lp_advertising |=
+ ADVERTISED_10000baseKR_Full;
+ } else {
+ cmd->lp_advertising |=
+ ADVERTISED_10000baseT_Full;
+ }
+ }
if (status & LINK_STATUS_LINK_PARTNER_20GXFD_CAPABLE)
cmd->lp_advertising |= ADVERTISED_20000baseKR2_Full;
}
@@ -564,15 +579,20 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- if (!(bp->port.supported[cfg_idx] &
- SUPPORTED_1000baseT_Full)) {
+ if (bp->port.supported[cfg_idx] &
+ SUPPORTED_1000baseT_Full) {
+ advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_TP);
+
+ } else if (bp->port.supported[cfg_idx] &
+ SUPPORTED_1000baseKX_Full) {
+ advertising = ADVERTISED_1000baseKX_Full;
+ } else {
DP(BNX2X_MSG_ETHTOOL,
"1G full not supported\n");
return -EINVAL;
}
- advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_TP);
break;
case SPEED_2500:
@@ -600,17 +620,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
phy_idx = bnx2x_get_cur_phy_idx(bp);
- if (!(bp->port.supported[cfg_idx]
- & SUPPORTED_10000baseT_Full) ||
- (bp->link_params.phy[phy_idx].media_type ==
+ if ((bp->port.supported[cfg_idx] &
+ SUPPORTED_10000baseT_Full) &&
+ (bp->link_params.phy[phy_idx].media_type !=
ETH_PHY_SFP_1G_FIBER)) {
+ advertising = (ADVERTISED_10000baseT_Full |
+ ADVERTISED_FIBRE);
+ } else if (bp->port.supported[cfg_idx] &
+ SUPPORTED_10000baseKR_Full) {
+ advertising = (ADVERTISED_10000baseKR_Full |
+ ADVERTISED_FIBRE);
+ } else {
DP(BNX2X_MSG_ETHTOOL,
"10G full not supported\n");
return -EINVAL;
}
- advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_FIBRE);
break;
default:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index b287fc8..a0b03c2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -11493,7 +11493,9 @@ static const struct bnx2x_phy phy_warpcore = {
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseKX_Full |
SUPPORTED_10000baseT_Full |
+ SUPPORTED_10000baseKR_Full |
SUPPORTED_20000baseKR2_Full |
SUPPORTED_20000baseMLD2_Full |
SUPPORTED_FIBRE |
@@ -11999,8 +12001,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
break;
case PORT_HW_CFG_NET_SERDES_IF_KR:
phy->media_type = ETH_PHY_KR;
- phy->supported &= (SUPPORTED_1000baseT_Full |
- SUPPORTED_10000baseT_Full |
+ phy->supported &= (SUPPORTED_1000baseKX_Full |
+ SUPPORTED_10000baseKR_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
@@ -12018,8 +12020,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
phy->media_type = ETH_PHY_KR;
phy->flags |= FLAGS_WC_DUAL_MODE;
phy->supported &= (SUPPORTED_20000baseKR2_Full |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseKR_Full |
+ SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index a03a9f2..bf5f5df 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11143,6 +11143,12 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->port.advertising[idx] |=
(ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
+ } else if (bp->port.supported[idx] &
+ SUPPORTED_1000baseKX_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_1000;
+ bp->port.advertising[idx] |=
+ ADVERTISED_1000baseKX_Full;
} else {
BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
link_config,
@@ -11175,6 +11181,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp)
bp->port.advertising[idx] |=
(ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
+ } else if (bp->port.supported[idx] &
+ SUPPORTED_10000baseKR_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_10000;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_10000baseKR_Full |
+ ADVERTISED_FIBRE);
} else {
BNX2X_ERR("NVRAM config error. Invalid link_config 0x%x speed_cap_mask 0x%x\n",
link_config,
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists