| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LFD.2.11.1506301229520.1799@denkbrett>
Date: Tue, 30 Jun 2015 12:45:12 +0200 (CEST)
From: Sebastian Ott <sebott@...ux.vnet.ibm.com>
To: Eran Ben Elisha <eranbe@...lanox.com>,
Or Gerlitz <ogerlitz@...lanox.com>,
Jack Morgenstein <jackm@....mellanox.co.il>,
Hadar Hen Zion <hadarh@...lanox.com>
cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: mlx4: "failed to allocate default counter port 1"
Hello,
after the latest mellanox update the mlx4 driver fails to probe a VF:
[ 88.909562] mlx4_core 0000:00:00.0: mlx4_allocate_default_counters: failed to allocate default counter port 1 err -22
[ 88.909564] mlx4_core 0000:00:00.0: Failed to allocate default counters, aborting
[ 88.961735] mlx4_core: probe of 0000:00:00.0 failed with error -22
PFs still work. See below for more dmesg output - I also added a line of
debug output...maybe this helps.
Regards,
Sebastian
# git diff
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c
b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 8204013..e0c41c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -565,6 +565,9 @@ static int mlx4_slave_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
}
}
ret = mlx4_status_to_errno(vhcr->status);
+ if (ret)
+ printk(KERN_WARNING"%s op=%d, ret=%d, status=%d\n",
+ __func__, op, ret, vhcr->status);
} else {
if (dev->persist->state &
MLX4_DEVICE_STATE_INTERNAL_ERROR)
# git describe
v4.1-11355-g6aaf0da
# dmesg
[ 88.518946] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 88.518967] mlx4_core: Initializing 0000:00:00.0
[ 88.519101] mlx4_core 0000:00:00.0: enabling device (0000 -> 0002)
[ 88.519661] mlx4_core 0000:00:00.0: enabling bus mastering
[ 88.520279] mlx4_core 0000:00:00.0: Detected virtual function - running in slave mode
[ 88.520404] mlx4_core 0000:00:00.0: Sending reset
[ 88.526726] mlx4_core 0000:00:00.0: Sending vhcr0
[ 88.539676] mlx4_core 0000:00:00.0: BlueFlame not available
[ 88.539678] mlx4_core 0000:00:00.0: Base MM extensions: flags 31104ec2, rsvd L_Key 00008000
[ 88.539680] mlx4_core 0000:00:00.0: Max ICM size 4294967296 MB
[ 88.539682] mlx4_core 0000:00:00.0: Max QPs: 16777216, reserved QPs: 64, entry size: 256
[ 88.539683] mlx4_core 0000:00:00.0: Max SRQs: 16777216, reserved SRQs: 64, entry size: 128
[ 88.539685] mlx4_core 0000:00:00.0: Max CQs: 16777216, reserved CQs: 128, entry size: 128
[ 88.539687] mlx4_core 0000:00:00.0: Num sys EQs: 1024, max EQs: 512, reserved EQs: 8, entry size: 128
[ 88.539688] mlx4_core 0000:00:00.0: reserved MPTs: 256, reserved MTTs: 64
[ 88.539690] mlx4_core 0000:00:00.0: Max PDs: 131072, reserved PDs: 4, reserved UARs: 2
[ 88.539691] mlx4_core 0000:00:00.0: Max QP/MCG: 131072, reserved MGMs: 0
[ 88.539693] mlx4_core 0000:00:00.0: Max CQEs: 4194304, max WQEs: 16384, max SRQ WQEs: 16384
[ 88.539695] mlx4_core 0000:00:00.0: Local CA ACK delay: 15, max MTU: 4096, port width cap: 3
[ 88.539696] mlx4_core 0000:00:00.0: Max SQ desc size: 1008, max SQ S/G: 62
[ 88.539698] mlx4_core 0000:00:00.0: Max RQ desc size: 512, max RQ S/G: 32
[ 88.539699] mlx4_core 0000:00:00.0: Max GSO size: 131072
[ 88.539701] mlx4_core 0000:00:00.0: Max counters: 256
[ 88.539702] mlx4_core 0000:00:00.0: Max RSS Table size: 256
[ 88.539704] mlx4_core 0000:00:00.0: DMFS high rate steer QPn base: 64
[ 88.539705] mlx4_core 0000:00:00.0: DMFS high rate steer QPn range: 254
[ 88.539707] mlx4_core 0000:00:00.0: QP Rate-Limit: #rates 1024, unit/val max 3/40, min 1/512
[ 88.539709] mlx4_core 0000:00:00.0: DEV_CAP flags:
[ 88.539710] mlx4_core 0000:00:00.0: RC transport
[ 88.539711] mlx4_core 0000:00:00.0: UC transport
[ 88.539713] mlx4_core 0000:00:00.0: UD transport
[ 88.539714] mlx4_core 0000:00:00.0: XRC transport
[ 88.539716] mlx4_core 0000:00:00.0: SRQ support
[ 88.539717] mlx4_core 0000:00:00.0: IPoIB checksum offload
[ 88.539719] mlx4_core 0000:00:00.0: P_Key violation counter
[ 88.539720] mlx4_core 0000:00:00.0: Q_Key violation counter
[ 88.539722] mlx4_core 0000:00:00.0: Big LSO headers
[ 88.539723] mlx4_core 0000:00:00.0: MW support
[ 88.539724] mlx4_core 0000:00:00.0: APM support
[ 88.539726] mlx4_core 0000:00:00.0: Atomic ops support
[ 88.539727] mlx4_core 0000:00:00.0: Address vector port checking support
[ 88.539729] mlx4_core 0000:00:00.0: UD multicast support
[ 88.539730] mlx4_core 0000:00:00.0: IBoE support
[ 88.539732] mlx4_core 0000:00:00.0: Unicast loopback support
[ 88.539733] mlx4_core 0000:00:00.0: FCS header control
[ 88.539735] mlx4_core 0000:00:00.0: UDP RSS support
[ 88.539736] mlx4_core 0000:00:00.0: Unicast VEP steering support
[ 88.539738] mlx4_core 0000:00:00.0: Multicast VEP steering support
[ 88.539739] mlx4_core 0000:00:00.0: Counters support
[ 88.539741] mlx4_core 0000:00:00.0: RSS IP fragments support
[ 88.539742] mlx4_core 0000:00:00.0: Port ETS Scheduler support
[ 88.539744] mlx4_core 0000:00:00.0: Port link type sensing support
[ 88.539745] mlx4_core 0000:00:00.0: Port management change event support
[ 88.539747] mlx4_core 0000:00:00.0: 64 byte EQE support
[ 88.539748] mlx4_core 0000:00:00.0: 64 byte CQE support
[ 88.539749] mlx4_core 0000:00:00.0: RSS support
[ 88.539751] mlx4_core 0000:00:00.0: RSS Toeplitz Hash Function support
[ 88.539752] mlx4_core 0000:00:00.0: RSS XOR Hash Function support
[ 88.539754] mlx4_core 0000:00:00.0: Device managed flow steering support
[ 88.539755] mlx4_core 0000:00:00.0: Automatic MAC reassignment support
[ 88.539757] mlx4_core 0000:00:00.0: Time stamping support
[ 88.539758] mlx4_core 0000:00:00.0: VST (control vlan insertion/stripping) support
[ 88.539760] mlx4_core 0000:00:00.0: FSM (MAC anti-spoofing) support
[ 88.539761] mlx4_core 0000:00:00.0: Dynamic QP updates support
[ 88.539763] mlx4_core 0000:00:00.0: MAD DEMUX (Secure-Host) support
[ 88.539764] mlx4_core 0000:00:00.0: Large cache line (>64B) CQE stride support
[ 88.539766] mlx4_core 0000:00:00.0: Large cache line (>64B) EQE stride support
[ 88.539767] mlx4_core 0000:00:00.0: Ethernet protocol control support
[ 88.539769] mlx4_core 0000:00:00.0: Ethernet Backplane autoneg support
[ 88.539770] mlx4_core 0000:00:00.0: CONFIG DEV support
[ 88.539771] mlx4_core 0000:00:00.0: Asymmetric EQs support
[ 88.539773] mlx4_core 0000:00:00.0: More than 80 VFs support
[ 88.539774] mlx4_core 0000:00:00.0: Recoverable error events support
[ 88.539776] mlx4_core 0000:00:00.0: Port Remap support
[ 88.539777] mlx4_core 0000:00:00.0: QCN support
[ 88.539779] mlx4_core 0000:00:00.0: QP rate limiting support
[ 88.539780] mlx4_core 0000:00:00.0: Ethernet Flow control statistics support
[ 88.539782] mlx4_core 0000:00:00.0: Granular QoS per VF support
[ 88.539783] mlx4_core 0000:00:00.0: Port beacon support
[ 88.540492] mlx4_core 0000:00:00.0: HCA minimum page size:512
[ 88.543436] mlx4_core 0000:00:00.0: Timestamping is not supported in slave mode
[ 88.543438] mlx4_core 0000:00:00.0: Steering mode is: Device managed flow steering
[ 88.543440] mlx4_core 0000:00:00.0: RSS support for IP fragments is off
[ 88.543441] mlx4_core 0000:00:00.0: Failed to map blue flame area
[ 88.909056] mlx4_core 0000:00:00.0: NOP command IRQ test passed
[ 88.909558] mlx4_slave_cmd op=3840, ret=-22, status=3
[ 88.909562] mlx4_core 0000:00:00.0: mlx4_allocate_default_counters: failed to allocate default counter port 1 err -22
[ 88.909564] mlx4_core 0000:00:00.0: Failed to allocate default counters, aborting
[ 88.961735] mlx4_core: probe of 0000:00:00.0 failed with error -22
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists