[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <55A6E48E.3020206@cumulusnetworks.com>
Date: Thu, 16 Jul 2015 00:54:06 +0200
From: Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
To: "Eric W. Biederman" <ebiederm@...ssion.com>,
Nikolay Aleksandrov <razor@...ckwall.org>
CC: netdev@...r.kernel.org, j.vosburgh@...il.com,
gospo@...ulusnetworks.com, vfalico@...il.com,
clsoto@...ux.vnet.ibm.com, davem@...emloft.net
Subject: Re: [PATCH net] bonding: fix destruction of bond with devices different
from arphrd_ether
On 07/16/2015 12:39 AM, Eric W. Biederman wrote:
> Nikolay Aleksandrov <razor@...ckwall.org> writes:
>
>> From: Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
>>
>> When the bonding is being unloaded and the netdevice notifier is
>> unregistered it executes NETDEV_UNREGISTER for each device which should
>> remove the bond's proc entry but if the device enslaved is not of
>> ARPHRD_ETHER type and is in front of the bonding, it may execute
>> bond_release_and_destroy() first which would release the last slave and
>> destroy the bond device leaving the proc entry and thus we will get the
>> following error (with dynamic debug on for bond_netdev_event to see the
>> events order):
>
> I see the failure below. I am perplexed at the description. Does the
> bonding driver actually make sense on a non-ethernet device?
>
Sometimes it does, I've seen it used with infiniband devices a lot, also
there were cases of some ppp users.
> Would it not be better to make more sense to limit bonding to ethernet
> devices so we don't get weird behavior? I imagine there might be other
> problems with bonding non-ethernet devices that no one has spotted,
> or cares about.
>
> Eric
>
>
My personal opinion would be to disable non-ethernet devices, but support was
already added and has been there for a long time so we have to fix this for
the older releases, I don't mind removing non-ethernet device support for net-next
but I'm guessing there're people still using that like the case that started
this thread.
Cheers,
Nik
>> [ 908.963051] eql: event: 9
>> [ 908.963052] eql: IFF_SLAVE
>> [ 908.963054] eql: event: 2
>> [ 908.963056] eql: IFF_SLAVE
>> [ 908.963058] eql: event: 6
>> [ 908.963059] eql: IFF_SLAVE
>> [ 908.963110] bond0: Releasing active interface eql
>> [ 908.976168] bond0: Destroying bond bond0
>> [ 908.976266] bond0 (unregistering): Released all slaves
>> [ 908.984097] ------------[ cut here ]------------
>> [ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575
>> remove_proc_entry+0x112/0x160()
>> [ 908.984110] remove_proc_entry: removing non-empty directory
>> 'net/bonding', leaking at least 'bond0'
>> [ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss
>> oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
>> crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper
>> snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw
>> gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec
>> psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev
>> drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core
>> pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button
>> autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom
>> ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci
>> virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore
>> usb_common [last unloaded: bonding]
>>
>> [ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O
>> 4.2.0-rc2+ #8
>> [ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
>> [ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34
>> ffff8800358dfda8
>> [ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40
>> ffff88003e3a4280
>> [ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a
>> ffffffff8172ebd0
>> [ 908.984181] Call Trace:
>> [ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50
>> [ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0
>> [ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50
>> [ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160
>> [ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30
>> [bonding]
>> [ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding]
>> [ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70
>> [ 908.984225] [<ffffffff8142f52d>] ?
>> unregister_pernet_operations+0x8d/0xd0
>> [ 908.984228] [<ffffffff8142f58d>] ?
>> unregister_pernet_subsys+0x1d/0x30
>> [ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding]
>> [ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250
>> [ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0
>> [ 908.984244] [<ffffffff8152b732>] ?
>> entry_SYSCALL_64_fastpath+0x16/0x75
>> [ 908.984247] ---[ end trace 7c006ed4abbef24b ]---
>>
>> Thus remove the proc entry manually if bond_release_and_destroy() is
>> used. Because of the checks in bond_remove_proc_entry() it's not a
>> problem for a bond device to change namespaces (the bug fixed by the
>> Fixes commit) but since commit
>> f9399814927ad ("bonding: Don't allow bond devices to change network
>> namespaces.") that can't happen anyway.
>>
>> Reported-by: Carol Soto <clsoto@...ux.vnet.ibm.com>
>> Signed-off-by: Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
>> Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from
>> the netdev events")
>> ---
>> drivers/net/bonding/bond_main.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>> index 317a49480475..ec1404ec4d2f 100644
>> --- a/drivers/net/bonding/bond_main.c
>> +++ b/drivers/net/bonding/bond_main.c
>> @@ -1916,6 +1916,7 @@ static int bond_release_and_destroy(struct net_device *bond_dev,
>> bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
>> netdev_info(bond_dev, "Destroying bond %s\n",
>> bond_dev->name);
>> + bond_remove_proc_entry(bond);
>> unregister_netdevice(bond_dev);
>> }
>> return ret;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists