| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1438759670-2134-2-git-send-email-sathya.perla@avagotech.com>
Date: Wed, 5 Aug 2015 03:27:48 -0400
From: Sathya Perla <sathya.perla@...gotech.com>
To: netdev@...r.kernel.org
Subject: [PATCH 1/3] be2net: enable IFACE filters only after creating RXQs
From: Kalesh AP <kalesh.purayil@...gotech.com>
HW issues were observed on Lancer adapters if IFACE filters
(flags, mac addrs etc) are enabled *before* creating RXQs. This patch
changes the driver design by enabling filters in be_open() --
instead of be_setup() -- after RXQs are created and buffers posted.
Two new wrapper functions, be_enable_if_filters() and
be_disable_if_filters() are introduced to enable/disable IFACE filters in
be_open()/be_close() respectively. In be_setup() the IFACE is now created
only with the RSS flag.
Signed-off-by: Kalesh AP <kalesh.purayil@...gotech.com>
Signed-off-by: Sathya Perla <sathya.perla@...gotech.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.h | 5 ++
drivers/net/ethernet/emulex/benet/be_main.c | 127 ++++++++++++++++++----------
2 files changed, 85 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 2716e6f..00e3a6b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -620,6 +620,11 @@ enum be_if_flags {
BE_IF_FLAGS_VLAN_PROMISCUOUS |\
BE_IF_FLAGS_MCAST_PROMISCUOUS)
+#define BE_IF_EN_FLAGS (BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PASS_L3L4_ERRORS |\
+ BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_UNTAGGED)
+
+#define BE_IF_ALL_FILT_FLAGS (BE_IF_EN_FLAGS | BE_IF_FLAGS_ALL_PROMISCUOUS)
+
/* An RX interface is an object with one or more MAC addresses and
* filtering capabilities. */
struct be_cmd_req_if_create {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 6f64242..7730f21 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -273,6 +273,10 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
if (ether_addr_equal(addr->sa_data, netdev->dev_addr))
return 0;
+ /* if device is not running, copy MAC to netdev->dev_addr */
+ if (!netif_running(netdev))
+ goto done;
+
/* The PMAC_ADD cmd may fail if the VF doesn't have FILTMGMT
* privilege or if PF did not provision the new MAC address.
* On BE3, this cmd will always fail if the VF doesn't have the
@@ -307,9 +311,9 @@ static int be_mac_addr_set(struct net_device *netdev, void *p)
status = -EPERM;
goto err;
}
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- dev_info(dev, "MAC address changed to %pM\n", mac);
+done:
+ ether_addr_copy(netdev->dev_addr, addr->sa_data);
+ dev_info(dev, "MAC address changed to %pM\n", addr->sa_data);
return 0;
err:
dev_warn(dev, "MAC address change to %pM failed\n", addr->sa_data);
@@ -3361,6 +3365,33 @@ static void be_rx_qs_destroy(struct be_adapter *adapter)
}
}
+static void be_disable_if_filters(struct be_adapter *adapter)
+{
+ be_cmd_pmac_del(adapter, adapter->if_handle,
+ adapter->pmac_id[0], 0);
+
+ be_clear_uc_list(adapter);
+
+ /* The IFACE flags are enabled in the open path and cleared
+ * in the close path. When a VF gets detached from the host and
+ * assigned to a VM the following happens:
+ * - VF's IFACE flags get cleared in the detach path
+ * - IFACE create is issued by the VF in the attach path
+ * Due to a bug in the BE3/Skyhawk-R FW
+ * (Lancer FW doesn't have the bug), the IFACE capability flags
+ * specified along with the IFACE create cmd issued by a VF are not
+ * honoured by FW. As a consequence, if a *new* driver
+ * (that enables/disables IFACE flags in open/close)
+ * is loaded in the host and an *old* driver is * used by a VM/VF,
+ * the IFACE gets created *without* the needed flags.
+ * To avoid this, disable RX-filter flags only for Lancer.
+ */
+ if (lancer_chip(adapter)) {
+ be_cmd_rx_filter(adapter, BE_IF_ALL_FILT_FLAGS, OFF);
+ adapter->if_flags &= ~BE_IF_ALL_FILT_FLAGS;
+ }
+}
+
static int be_close(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
@@ -3373,6 +3404,8 @@ static int be_close(struct net_device *netdev)
if (!(adapter->flags & BE_FLAGS_SETUP_DONE))
return 0;
+ be_disable_if_filters(adapter);
+
be_roce_dev_close(adapter);
if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
@@ -3392,7 +3425,6 @@ static int be_close(struct net_device *netdev)
be_tx_compl_clean(adapter);
be_rx_qs_destroy(adapter);
- be_clear_uc_list(adapter);
for_all_evt_queues(adapter, eqo, i) {
if (msix_enabled(adapter))
@@ -3477,6 +3509,31 @@ static int be_rx_qs_create(struct be_adapter *adapter)
return 0;
}
+static int be_enable_if_filters(struct be_adapter *adapter)
+{
+ int status;
+
+ status = be_cmd_rx_filter(adapter, BE_IF_EN_FLAGS, ON);
+ if (status)
+ return status;
+
+ /* For BE3 VFs, the PF programs the initial MAC address */
+ if (!(BEx_chip(adapter) && be_virtfn(adapter))) {
+ status = be_cmd_pmac_add(adapter, adapter->netdev->dev_addr,
+ adapter->if_handle,
+ &adapter->pmac_id[0], 0);
+ if (status)
+ return status;
+ }
+
+ if (adapter->vlans_added)
+ be_vid_config(adapter);
+
+ be_set_rx_mode(adapter->netdev);
+
+ return 0;
+}
+
static int be_open(struct net_device *netdev)
{
struct be_adapter *adapter = netdev_priv(netdev);
@@ -3490,6 +3547,10 @@ static int be_open(struct net_device *netdev)
if (status)
goto err;
+ status = be_enable_if_filters(adapter);
+ if (status)
+ goto err;
+
status = be_irq_register(adapter);
if (status)
goto err;
@@ -3686,16 +3747,6 @@ static void be_cancel_err_detection(struct be_adapter *adapter)
}
}
-static void be_mac_clear(struct be_adapter *adapter)
-{
- if (adapter->pmac_id) {
- be_cmd_pmac_del(adapter, adapter->if_handle,
- adapter->pmac_id[0], 0);
- kfree(adapter->pmac_id);
- adapter->pmac_id = NULL;
- }
-}
-
#ifdef CONFIG_BE2NET_VXLAN
static void be_disable_vxlan_offloads(struct be_adapter *adapter)
{
@@ -3770,8 +3821,8 @@ static int be_clear(struct be_adapter *adapter)
#ifdef CONFIG_BE2NET_VXLAN
be_disable_vxlan_offloads(adapter);
#endif
- /* delete the primary mac along with the uc-mac list */
- be_mac_clear(adapter);
+ kfree(adapter->pmac_id);
+ adapter->pmac_id = NULL;
be_cmd_if_destroy(adapter, adapter->if_handle, 0);
@@ -3782,25 +3833,11 @@ static int be_clear(struct be_adapter *adapter)
return 0;
}
-static int be_if_create(struct be_adapter *adapter, u32 *if_handle,
- u32 cap_flags, u32 vf)
-{
- u32 en_flags;
-
- en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
- BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS |
- BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS;
-
- en_flags &= cap_flags;
-
- return be_cmd_if_create(adapter, cap_flags, en_flags, if_handle, vf);
-}
-
static int be_vfs_if_create(struct be_adapter *adapter)
{
struct be_resources res = {0};
+ u32 cap_flags, en_flags, vf;
struct be_vf_cfg *vf_cfg;
- u32 cap_flags, vf;
int status;
/* If a FW profile exists, then cap_flags are updated */
@@ -3821,8 +3858,12 @@ static int be_vfs_if_create(struct be_adapter *adapter)
}
}
- status = be_if_create(adapter, &vf_cfg->if_handle,
- cap_flags, vf + 1);
+ en_flags = cap_flags & (BE_IF_FLAGS_UNTAGGED |
+ BE_IF_FLAGS_BROADCAST |
+ BE_IF_FLAGS_MULTICAST |
+ BE_IF_FLAGS_PASS_L3L4_ERRORS);
+ status = be_cmd_if_create(adapter, cap_flags, en_flags,
+ &vf_cfg->if_handle, vf + 1);
if (status)
return status;
}
@@ -4194,15 +4235,8 @@ static int be_mac_setup(struct be_adapter *adapter)
memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
- } else {
- /* Maybe the HW was reset; dev_addr must be re-programmed */
- memcpy(mac, adapter->netdev->dev_addr, ETH_ALEN);
}
- /* For BE3-R VFs, the PF programs the initial MAC address */
- if (!(BEx_chip(adapter) && be_virtfn(adapter)))
- be_cmd_pmac_add(adapter, mac, adapter->if_handle,
- &adapter->pmac_id[0], 0);
return 0;
}
@@ -4342,6 +4376,7 @@ static int be_func_init(struct be_adapter *adapter)
static int be_setup(struct be_adapter *adapter)
{
struct device *dev = &adapter->pdev->dev;
+ u32 en_flags;
int status;
status = be_func_init(adapter);
@@ -4364,8 +4399,11 @@ static int be_setup(struct be_adapter *adapter)
if (status)
goto err;
- status = be_if_create(adapter, &adapter->if_handle,
- be_if_cap_flags(adapter), 0);
+ /* will enable all the needed filter flags in be_open() */
+ en_flags = BE_IF_FLAGS_RSS | BE_IF_FLAGS_DEFQ_RSS;
+ en_flags = en_flags & be_if_cap_flags(adapter);
+ status = be_cmd_if_create(adapter, be_if_cap_flags(adapter), en_flags,
+ &adapter->if_handle, 0);
if (status)
goto err;
@@ -4391,11 +4429,6 @@ static int be_setup(struct be_adapter *adapter)
dev_err(dev, "Please upgrade firmware to version >= 4.0\n");
}
- if (adapter->vlans_added)
- be_vid_config(adapter);
-
- be_set_rx_mode(adapter->netdev);
-
status = be_cmd_set_flow_control(adapter, adapter->tx_fc,
adapter->rx_fc);
if (status)
--
2.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists