| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20150813062810.GA13296@vkochan>
Date: Thu, 13 Aug 2015 09:28:10 +0300
From: vkochan <vadim4j@...il.com>
To: Pavel Šimerda <pavlix@...lix.net>
Cc: netdev@...r.kernel.org,
Stephen Hemminger <stephen@...workplumber.org>,
Daniel Borkmann <daniel@...earbox.net>,
Phil Sutter <psutter@...hat.com>,
Pavel Šimerda <psimerda@...hat.com>
Subject: Re: [PATCH iproute2 2/3] ip-link: fix and extend documentation
On Wed, Aug 12, 2015 at 10:04:07PM +0200, Pavel Šimerda wrote:
> From: Pavel Šimerda <psimerda@...hat.com>
>
> * Add `can` to list of supported link types
> * Document `addrgenmode`
> * Document `link-netnsid`
> * Document VLAN link type
> * Improve VXLAN link type documentation
> - Fix VXLAN srcport/dstport docs
> - Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
> ---
> man/man8/ip-link.8.in | 112 ++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 108 insertions(+), 4 deletions(-)
>
> diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
> index 372e6c6..9ff9a23 100644
> --- a/man/man8/ip-link.8.in
> +++ b/man/man8/ip-link.8.in
> @@ -143,9 +143,13 @@ ip-link \- network device configuration
> ] |
> .br
> .B master
> -.IR DEVICE
> +.IR DEVICE " |"
> .br
> -.B nomaster
> +.B nomaster " |"
> +.br
> +.B addrgenmode { eui64 | none }
> +.br
> +.B link-netnsid ID
> .BR " }"
>
>
> @@ -185,6 +189,8 @@ Link types:
> .sp
> .B bond
> - Bonding device
> +.B can
> +- Controller Area Network interface
> .sp
> .B dummy
> - Dummy network interface
> @@ -266,6 +272,66 @@ specifies the number of receive queues for new device.
> specifies the desired index of the new virtual device. The link creation fails, if the index is busy.
>
> .TP
> +VLAN Type Support
> +For a link of type
> +.I VLAN
> +the following additional arguments are supported:
> +
> +.BI "ip link add
> +.BI link " DEVICE "
> +.BI name " NAME "
> +.BI type " vlan "
> +.R " [ "
> +.BI protocol " VLAN_PROTO "
> +.R " ] "
> +.BI id " VLANID "
> +.R " [ "
> +.BR reorder_hdr " { " on " | " off " } "
> +.R " ] "
> +.R " [ "
> +.BR gvrp " { " on " | " off " } "
> +.R " ] "
> +.R " [ "
> +.BR mvrp " { " on " | " off " } "
> +.R " ] "
> +.R " [ "
> +.BR loose_binding " { " on " | " off " } "
> +.R " ] "
> +.R " [ "
> +.BI ingress-qos-map " QOS-MAP "
> +.R " ] "
> +.R " [ "
> +.BI egress-qos-map " QOS-MAP "
> +.R " ] "
> +
> +.in +8
> +.sp
> +.BI protocol " VLAN_PROTO "
> +- either 802.1Q or 802.1ad.
> +
> +.BI id " VLANID "
> +- specifies the VLAN Identifer to use. Note that numbers with a leading " 0 " or " 0x " are interpreted as octal or hexadeimal, respectively.
> +
> +.BR reorder_hdr " { " on " | " off " } "
> +- specifies whether ethernet headers are reordered or not.
May be it should have more detailed explanation like that this feature is ON by default and what it affects on ?
> +
> +.BR gvrp " { " on " | " off " } "
> +- specifies whether this VLAN should be registered using GARP VLAN Registration Protocol.
> +
> +.BR mvrp " { " on " | " off " } "
> +- specifies whether this VLAN should be registered using Multiple VLAN Registration Protocol.
> +
> +.BR loose_binding " { " on " | " off " } "
> +- specifies whether the VLAN device state is bound to the physical device state.
May be add some little explanation that it means that if physical device goes DOWN then the vlan device does the same ?
> +
> +.BI ingress-qos-map " QOS-MAP "
> +- defines a mapping between priority code points on incoming frames. The format is FROM:TO with multiple mappings separated by spaces.
Would it be useful if to add here explanation that under priority it means skb->priority and may be some example how it can be set by iptable CLASSIFY ?
> +
> +.BI egress-qos-map " QOS-MAP "
> +- the same as ingress-qos-map but for outgoing frames.
> +.in -8
> +
> +.TP
> VXLAN Type Support
> For a link of type
> .I VXLAN
> @@ -284,7 +350,9 @@ the following additional arguments are supported:
> .R " ] [ "
> .BI tos " TOS "
> .R " ] [ "
> -.BI port " MIN MAX "
> +.BI dstport " PORT "
> +.R " ] [ "
> +.BI srcport " MIN MAX "
> .R " ] [ "
> .I "[no]learning "
> .R " ] [ "
> @@ -296,6 +364,12 @@ the following additional arguments are supported:
> .R " ] [ "
> .I "[no]l3miss "
> .R " ] [ "
> +.I "[no]udpcsum "
> +.R " ] [ "
> +.I "[no]udp6zerocsumtx "
> +.R " ] [ "
> +.I "[no]udp6zerocsumrx "
> +.R " ] [ "
> .BI ageing " SECONDS "
> .R " ] [ "
> .BI maxaddress " NUMBER "
> @@ -340,7 +414,11 @@ parameter.
> - specifies the TOS value to use in outgoing packets.
>
> .sp
> -.BI port " MIN MAX"
> +.BI dstport " PORT"
> +- specifies the UDP destination port to communicate to the remote VXLAN tunnel endpoint.
> +
> +.sp
> +.BI srcport " MIN MAX"
> - specifies the range of port numbers to use as UDP
> source ports to communicate to the remote VXLAN tunnel endpoint.
>
> @@ -366,6 +444,18 @@ are entered into the VXLAN device forwarding database.
> - specifies if netlink IP ADDR miss notifications are generated.
>
> .sp
> +.I [no]udpcsum
> +- specifies if UDP checksum is filled in
> +
> +.sp
> +.I [no]udp6zerocsumtx
> +- specifies if UDP checksum is filled in
> +
> +.sp
> +.I [no]udp6zerocsumrx
> +- specifies if UDP checksum is received
> +
> +.sp
> .BI ageing " SECONDS"
> - specifies the lifetime in seconds of FDB entries learnt by the kernel.
>
> @@ -751,6 +841,12 @@ tool can be used. But it allows to change network namespace only for physical de
> give the device a symbolic name for easy reference.
>
> .TP
> +.BI group " GROUP"
> +specify the group the device belongs to.
> +The available groups are listed in file
> +.BR "@SYSCONFDIR@...oup" .
> +
> +.TP
> .BI vf " NUM"
> specify a Virtual Function device to be configured. The associated PF device
> must be specified using the
> @@ -829,6 +925,14 @@ set master device of the device (enslave device).
> .BI nomaster
> unset master device of the device (release device).
>
> +.TP
> +.BR "addrgenmode eui64 " or " addrgenmode none"
> +set IPv6 address generation mode
> +
> +.TP
> +.BR "link-netnsid "
> +set peer netnsid for a cross-netns interface
> +
> .PP
> .B Warning:
> If multiple parameter changes are requested,
> --
> 2.4.1
>
I just added my IMHOs, so please ignore them if you think they are useless.
Regards,
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists