lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1440151756-18165-1-git-send-email-vinschen@redhat.com>
Date:	Fri, 21 Aug 2015 12:09:16 +0200
From:	Corinna Vinschen <vinschen@...hat.com>
To:	netdev@...r.kernel.org
Cc:	Hayes Wang <hayeswang@...ltek.com>,
	Francois Romieu <romieu@...zoreil.com>,
	Ivan Vecera <ivecera@...hat.com>,
	David Miller <davem@...emloft.net>,
	nic_swsd <nic_swsd@...ltek.com>
Subject: [PATCH v2 net-next] r8169: Add values missing in @get_stats64 from HW counters

The r8169 driver collects statistical information returned by
@get_stats64 by counting them in the driver itself, even though many
(but not all) of the values are already collected by tally counters
(TCs) in the NIC.  Some of these TC values are not returned by
@get_stats64.  Especially the received multicast packages are missing
from /proc/net/dev.

Rectify this by fetching the TCs and returning them from
rtl8169_get_stats64.

The counters collected in the driver obviously disappear as soon as the
driver is unloaded so after a driver is loaded the counters always start
at 0. The TCs on the other hand are only reset by a power cycle.  Without
further considerations the values collected by the driver would not match
up against the TC values.

This patch introduces a new function rtl8169_reset_counters which
resets the TCs.

Unfortunately chip versions prior to RTL_GIGA_MAC_VER_19 don't allow
to reset the TCs programatically.  Therefore introduce an addition to
the rtl8169_private struct and a function rtl8169_init_counter_offsets
to store the TCs at first rtl_open.  Use these values as offsets in
rtl8169_get_stats64.

Signed-off-by: Corinna Vinschen <vinschen@...hat.com>
---
 drivers/net/ethernet/realtek/r8169.c | 107 +++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index f790f61..f26a48d 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -637,6 +637,9 @@ enum rtl_register_content {
 	/* _TBICSRBit */
 	TBILinkOK	= 0x02000000,
 
+	/* ResetCounterCommand */
+	CounterReset	= 0x1,
+
 	/* DumpCounterCommand */
 	CounterDump	= 0x8,
 
@@ -747,6 +750,14 @@ struct rtl8169_counters {
 	__le16	tx_underun;
 };
 
+struct rtl8169_tc_offsets {
+	bool	inited;
+	__le64	tx_errors;
+	__le32	tx_multi_collision;
+	__le32	rx_multicast;
+	__le16	tx_aborted;
+};
+
 enum rtl_flag {
 	RTL_FLAG_TASK_ENABLED,
 	RTL_FLAG_TASK_SLOW_PENDING,
@@ -824,6 +835,7 @@ struct rtl8169_private {
 
 	struct mii_if_info mii;
 	struct rtl8169_counters counters;
+	struct rtl8169_tc_offsets tc_offset;
 	u32 saved_wolopts;
 	u32 opts1_mask;
 
@@ -2179,6 +2191,47 @@ static int rtl8169_get_sset_count(struct net_device *dev, int sset)
 	}
 }
 
+DECLARE_RTL_COND(rtl_reset_counters_cond)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	return RTL_R32(CounterAddrLow) & CounterReset;
+}
+
+static void rtl8169_reset_counters(struct net_device *dev)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct device *d = &tp->pci_dev->dev;
+	struct rtl8169_counters *counters;
+	dma_addr_t paddr;
+	u32 cmd;
+
+	/*
+	 * Versions prior to RTL_GIGA_MAC_VER_19 don't support resetting the
+	 * tally counters.
+	 */
+	if (tp->mac_version < RTL_GIGA_MAC_VER_19)
+		return;
+
+	counters = dma_alloc_coherent(d, sizeof(*counters), &paddr, GFP_KERNEL);
+	if (!counters)
+		return;
+
+	RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
+	cmd = (u64)paddr & DMA_BIT_MASK(32);
+	RTL_W32(CounterAddrLow, cmd);
+	RTL_W32(CounterAddrLow, cmd | CounterReset);
+
+	if (!rtl_udelay_loop_wait_low(tp, &rtl_reset_counters_cond, 10, 1000))
+		netif_warn(tp, hw, dev, "counter reset failed\n");
+
+	RTL_W32(CounterAddrLow, 0);
+	RTL_W32(CounterAddrHigh, 0);
+
+	dma_free_coherent(d, sizeof(*counters), counters, paddr);
+}
+
 DECLARE_RTL_COND(rtl_counters_cond)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
@@ -2220,6 +2273,39 @@ static void rtl8169_update_counters(struct net_device *dev)
 	dma_free_coherent(d, sizeof(*counters), counters, paddr);
 }
 
+static void rtl8169_init_counter_offsets(struct net_device *dev)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+
+	/*
+	 * rtl8169_init_counter_offsets is called from rtl_open.  On chip
+	 * versions prior to RTL_GIGA_MAC_VER_19 the tally counters are only
+	 * reset by a power cycle, while the counter values collected by the
+	 * driver are reset at every driver unload/load cycle.
+	 *
+	 * To make sure the HW values returned by @get_stats64 match the SW
+	 * values, we collect the initial values at first open(*) and use them
+	 * as offsets to normalize the values returned by @get_stats64.
+	 *
+	 * (*) We can't call rtl8169_init_counter_offsets from rtl_init_one
+	 * for the reason stated in rtl8169_update_counters; CmdRxEnb is only
+	 * set at open time by rtl_hw_start.
+	 */
+
+	if (tp->tc_offset.inited)
+		return;
+
+	rtl8169_reset_counters(dev);
+
+	rtl8169_update_counters(dev);
+
+	tp->tc_offset.tx_errors = tp->counters.tx_errors;
+	tp->tc_offset.tx_multi_collision = tp->counters.tx_multi_collision;
+	tp->tc_offset.rx_multicast = tp->counters.rx_multicast;
+	tp->tc_offset.tx_aborted = tp->counters.tx_aborted;
+	tp->tc_offset.inited = true;
+}
+
 static void rtl8169_get_ethtool_stats(struct net_device *dev,
 				      struct ethtool_stats *stats, u64 *data)
 {
@@ -7631,6 +7717,8 @@ static int rtl_open(struct net_device *dev)
 
 	rtl_hw_start(dev);
 
+	rtl8169_init_counter_offsets(dev);
+
 	netif_start_queue(dev);
 
 	rtl_unlock_work(tp);
@@ -7689,6 +7777,25 @@ rtl8169_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 	stats->rx_fifo_errors	= dev->stats.rx_fifo_errors;
 	stats->rx_missed_errors = dev->stats.rx_missed_errors;
 
+	/*
+	 * Fetch additonal counter values missing in stats collected by driver
+	 * from tally counters.
+	 */
+	rtl8169_update_counters(dev);
+
+	/*
+	 * Subtract values fetched during initalization.
+	 * See rtl8169_init_counter_offsets for a description why we do that.
+	 */
+	stats->tx_errors = le64_to_cpu(tp->counters.tx_errors) -
+		le64_to_cpu(tp->tc_offset.tx_errors);
+	stats->collisions = le32_to_cpu(tp->counters.tx_multi_collision) -
+		le32_to_cpu(tp->tc_offset.tx_multi_collision);
+	stats->multicast = le32_to_cpu(tp->counters.rx_multicast) -
+		le32_to_cpu(tp->tc_offset.rx_multicast);
+	stats->tx_aborted_errors = le16_to_cpu(tp->counters.tx_aborted) -
+		le16_to_cpu(tp->tc_offset.tx_aborted);
+
 	return stats;
 }
 
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ