netdev - Re: [PATCH -next] smsc911x: Fix crash seen if neither ACPI nor OF is configured or used

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <55DE069C.7000402@roeck-us.net>
Date:	Wed, 26 Aug 2015 11:34:04 -0700
From:	Guenter Roeck <linux@...ck-us.net>
To:	Tony Lindgren <tony@...mide.com>
CC:	Steve Glendinning <steve.glendinning@...well.net>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Jeremy Linton <jeremy.linton@....com>,
	linux-omap@...r.kernel.org
Subject: Re: [PATCH -next] smsc911x: Fix crash seen if neither ACPI nor OF
 is configured or used

On 08/26/2015 10:04 AM, Tony Lindgren wrote:
> Hi,
>
> * Guenter Roeck <linux@...ck-us.net> [150817 13:48]:
>> Commit 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT") makes
>> the call to smsc911x_probe_config() unconditional, and no longer fails if
>> there is no device node. device_get_phy_mode() is called unconditionally,
>> and if there is no phy node configured returns an error code. This error
>> code is assigned to phy_interface, and interpreted elsewhere in the code
>> as valid phy mode. This in turn causes qemu to crash when running a
>> variant of realview_pb_defconfig.
>>
>> 	qemu: hardware error: lan9118_read: Bad reg 0x86
>>
>> Fixes: 0b50dc4fc971 ("Convert smsc911x to use ACPI as well as DT")
>> Cc: Jeremy Linton <jeremy.linton@....com>
>> Cc Graeme Gregory <graeme.gregory@...aro.org>
>> Signed-off-by: Guenter Roeck <linux@...ck-us.net>
>> ---
>>   drivers/net/ethernet/smsc/smsc911x.c | 7 ++++++-
>>   1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
>> index 0f21aa3bb537..34f97684506b 100644
>> --- a/drivers/net/ethernet/smsc/smsc911x.c
>> +++ b/drivers/net/ethernet/smsc/smsc911x.c
>> @@ -2367,12 +2367,17 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
>>   static int smsc911x_probe_config(struct smsc911x_platform_config *config,
>>   				 struct device *dev)
>>   {
>> +	int phy_interface;
>>   	u32 width = 0;
>>
>>   	if (!dev)
>>   		return -ENODEV;
>>
>> -	config->phy_interface = device_get_phy_mode(dev);
>> +	phy_interface = device_get_phy_mode(dev);
>> +	if (phy_interface < 0)
>> +		return phy_interface;
>> +
>> +	config->phy_interface = phy_interface;
>>
>>   	device_get_mac_address(dev, config->mac, ETH_ALEN);
>
> Looks like this change makes at least omap boards using smsc911x
> fail with -22 for me in Linux next.
>
> Do any of the the device tree configured smsc911x devices actually
> have a phy configured?
>

Ok, this is more subtle than I thought.

Previously, the code would not attempt any devicetree configuration
if devicetree was not configured.

Now it does.

The error return from device_get_phy_mode() isn't the actual problem.
Apparently it doesn't really matter if a nonsensical value is assigned
to phy_interface.

The problem is that the reg-io-width property is obviously not present
in the non-dt and non-acpi case. This overwrites the existing platform data
configuration and selects 16 bit mode, to which the (simulated) hardware
obviously reacts less than enthusiastic.

Fixing this properly won't be easy. If the "reg-io-width" property
is not present or wrong, the default register width is 16 bit. Obviously,
if neither DT nor ACPI is available, it won't be present. This causes
the crash I had observed.

Bad part is that there does not seem to be a reliable means to detect
that platform data should be used in that situation. Other device_get_XXX
functions return -ENXIO if that happens, but not device_property_read_u32().
It is _supposed_ to return it per its API, but it doesn't (it returns
-ENODATA).

We may need two separate patches, one to fix up device_property_read_u32()
to return -ENXIO, and one to fix smsc911x_probe_config() to ignore the error
from device_get_phy_mode(), and to bail out if device_property_read_u32()
returns -ENXIO.

The simpler alternative would be to check the return value from
device_property_read_u32() for both -ENXIO and -ENODATA.
This would make the code independent of the necessary core changes
(which may take a while). I tested this variant, and it works, at least
for the non-DT case.

Does this make sense ?

Thanks,
Guenter

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html