lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1440629373-21287-5-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Wed, 26 Aug 2015 15:49:23 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Anjali Singhai Jain <anjali.singhai@...el.com>,
	netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
	jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v2 04/14] i40e: Fix legacy interrupt mode in the driver

From: Anjali Singhai Jain <anjali.singhai@...el.com>

This patch fixes the driver flow to take into account legacy interrupts.
Over time we added code that assumes MSIX is the only mode that the
driver runs in. It also enables a legacy workaround to trigger SWINT
when the TX ring has non-cache aligned descriptors pending and interrupts
are disabled.

We work with a single vector in MSI mode too, so apply the same
restrictions as Legacy.

Change-ID: I826ddff1f9bd45d2dbe11f56a3ddcef0dbf42563
Signed-off-by: Anjali Singhai Jain <anjali.singhai@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 07bfe61..481f427 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1550,7 +1550,10 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 	 * vectors available and so we need to lower the used
 	 * q count.
 	 */
-	qcount = min_t(int, vsi->alloc_queue_pairs, pf->num_lan_msix);
+	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+		qcount = min_t(int, vsi->alloc_queue_pairs, pf->num_lan_msix);
+	else
+		qcount = vsi->alloc_queue_pairs;
 	num_tc_qps = qcount / numtc;
 	num_tc_qps = min_t(int, num_tc_qps, i40e_pf_get_max_q_per_tc(pf));
 
@@ -1614,7 +1617,7 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 	if ((vsi->type == I40E_VSI_MAIN) && (numtc == 1)) {
 		if (vsi->req_queue_pairs > 0)
 			vsi->num_queue_pairs = vsi->req_queue_pairs;
-		else
+		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 			vsi->num_queue_pairs = pf->num_lan_msix;
 	}
 
@@ -3416,7 +3419,7 @@ static irqreturn_t i40e_fdir_clean_ring(int irq, void *data)
  * @v_idx: vector index
  * @qp_idx: queue pair index
  **/
-static void map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
+static void i40e_map_vector_to_qp(struct i40e_vsi *vsi, int v_idx, int qp_idx)
 {
 	struct i40e_q_vector *q_vector = vsi->q_vectors[v_idx];
 	struct i40e_ring *tx_ring = vsi->tx_rings[qp_idx];
@@ -3470,7 +3473,7 @@ static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi *vsi)
 		q_vector->tx.ring = NULL;
 
 		while (num_ringpairs--) {
-			map_vector_to_qp(vsi, v_start, qp_idx);
+			i40e_map_vector_to_qp(vsi, v_start, qp_idx);
 			qp_idx++;
 			qp_remaining--;
 		}
@@ -8798,6 +8801,11 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 		goto vector_setup_out;
 	}
 
+	/* In Legacy mode, we do not have to get any other vector since we
+	 * piggyback on the misc/ICR0 for queue interrupts.
+	*/
+	if (!(pf->flags & I40E_FLAG_MSIX_ENABLED))
+		return ret;
 	if (vsi->num_q_vectors)
 		vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
 						 vsi->num_q_vectors, vsi->idx);
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ