| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1441936878-18290-4-git-send-email-horms+renesas@verge.net.au>
Date: Fri, 11 Sep 2015 11:01:17 +0900
From: Simon Horman <horms+renesas@...ge.net.au>
To: netdev@...r.kernel.org, linux-sh@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org,
Magnus Damm <magnus.damm@...il.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Florian Fainelli <f.fainelli@...il.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Kazuya Mizuguchi <kazuya.mizuguchi.ks@...esas.com>,
Simon Horman <horms+renesas@...ge.net.au>
Subject: [PATCH/RFC v2 net-next 3/4] ravb: Document binding for r8a7795 SoC
From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@...esas.com>
This patch updates the ravb binding to support the r8a7795 SoC by:
- Adding a compat string for the new hardware
- Adding 25 named interrupts to binding for the new SoC;
older SoCs continue to use a single multiplexed interrupt
The example is also updated to reflect the r8a7795 as this is the
more complex case.
Based on work by Kazuya Mizuguchi and others.
Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
---
v2
* First post; broken out of a driver update patch
* As discussed with Geert Uytterhoeven and Sergei Shtylyov
- Binding: Make all interrupts mandatory as named-interrupts of
the form ch%u
---
.../devicetree/bindings/net/renesas,ravb.txt | 65 +++++++++++++++++++---
1 file changed, 58 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 1fd8831437bf..6c360f993d33 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -6,8 +6,11 @@ interface contains.
Required properties:
- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
+ "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
- reg: offset and length of (1) the register block and (2) the stream buffer.
-- interrupts: interrupt specifier for the sole interrupt.
+- interrupts: interrupt specifiers.
+ One for each entry in interrupt-names the R8A7795 SoC;
+ One entry for a multiplexed interrupt otherwise.
- phy-mode: see ethernet.txt file in the same directory.
- phy-handle: see ethernet.txt file in the same directory.
- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
@@ -18,6 +21,9 @@ Required properties:
Optional properties:
- interrupt-parent: the phandle for the interrupt controller that services
interrupts for this device.
+- interrupt-names: One entry per interrupt named "ch%u".
+ For the R8A7795 SoC this property is mandatory,
+ and "ch0" through "ch24" are mandatory.
- pinctrl-names: pin configuration state name ("default").
- renesas,no-ether-link: boolean, specify when a board does not provide a proper
AVB_LINK signal.
@@ -27,13 +33,46 @@ Optional properties:
Example:
ethernet@...00000 {
- compatible = "renesas,etheravb-r8a7790";
- reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ compatible = "renesas,etheravb-r8a7795";
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupt-parent = <&gic>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
- phy-mode = "rmii";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
+ phy-mode = "rgmii-id";
+ phy-reset-gpio = <&gpio2 10 0>;
phy-handle = <&phy0>;
+
pinctrl-0 = <ðer_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
@@ -41,8 +80,20 @@ Example:
#size-cells = <0>;
phy0: ethernet-phy@0 {
+ rxc-skew-ps = <900>;
+ rxdv-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txc-skew-ps = <900>;
+ txen-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists