[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1442363803-47237-19-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Tue, 15 Sep 2015 17:36:43 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Jacob Keller <jacob.e.keller@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com, jogreene@...hat.com,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 18/18] fm10k: fix iov_msg_mac_vlan_pf VID checks
From: Jacob Keller <jacob.e.keller@...el.com>
The VF will send a message to request multicast addresses with the
default VID. In the current code, if the PF has statically assigned a
VLAN to a VF, then the VF will not get the multicast addresses. Fix up
all of the various VLAN messages to use identical checks (since each
check was different). Also use set as a variable, so that it simplifies
our check for whether VLAN matches the pf_vid.
The new logic will allow set of a VLAN if it is zero, automatically
converting to the default VID. Otherwise it will allow setting the PF
VID, or any VLAN if PF has not statically assigned a VLAN. This is
consistent behavior, and allows VF to request either 0 or the
default_vid without silently failing.
Note that we need the check for zero since VFs might not get the default
VID message in time to actually request non-zero VLANs.
Signed-off-by: Jacob Keller <jacob.e.keller@...el.com>
Tested-by: Krishneil Singh <krishneil.k.singh@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 85 ++++++++++++++++++-----------
1 file changed, 52 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index d806d87..8c0bdc4 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -1155,6 +1155,24 @@ s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results,
}
/**
+ * fm10k_iov_select_vid - Select correct default VID
+ * @hw: Pointer to hardware structure
+ * @vid: VID to correct
+ *
+ * Will report an error if VID is out of range. For VID = 0, it will return
+ * either the pf_vid or sw_vid depending on which one is set.
+ */
+static inline s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
+{
+ if (!vid)
+ return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid;
+ else if (vf_info->pf_vid && vid != vf_info->pf_vid)
+ return FM10K_ERR_PARAM;
+ else
+ return vid;
+}
+
+/**
* fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF
* @hw: Pointer to hardware structure
* @results: Pointer array to message, results[0] is pointer to message
@@ -1168,9 +1186,10 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
struct fm10k_mbx_info *mbx)
{
struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
- int err = 0;
u8 mac[ETH_ALEN];
u32 *result;
+ int err = 0;
+ bool set;
u16 vlan;
u32 vid;
@@ -1186,19 +1205,21 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (err)
return err;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vid || (vid == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vid |= vf_info->pf_vid;
- else
- vid |= vf_info->sw_vid;
- } else if (vid != vf_info->pf_vid) {
+ /* verify upper 16 bits are zero */
+ if (vid >> 16)
return FM10K_ERR_PARAM;
- }
+
+ set = !(vid & FM10K_VLAN_CLEAR);
+ vid &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vid);
+ if (err < 0)
+ return err;
+ else
+ vid = err;
/* update VSI info for VF in regards to VLAN table */
- err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi,
- !(vid & FM10K_VLAN_CLEAR));
+ err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
@@ -1214,19 +1235,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
memcmp(mac, vf_info->mac, ETH_ALEN))
return FM10K_ERR_PARAM;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vlan |= vf_info->pf_vid;
- else
- vlan |= vf_info->sw_vid;
- } else if (vf_info->pf_vid) {
- return FM10K_ERR_PARAM;
- }
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+ else
+ vlan = err;
/* notify switch of request for new unicast address */
- err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, mac, vlan,
- !(vlan & FM10K_VLAN_CLEAR), 0);
+ err = hw->mac.ops.update_uc_addr(hw, vf_info->glort,
+ mac, vlan, set, 0);
}
if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
@@ -1241,19 +1261,18 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
return FM10K_ERR_PARAM;
- /* if VLAN ID is 0, set the default VLAN ID instead of 0 */
- if (!vlan || (vlan == FM10K_VLAN_CLEAR)) {
- if (vf_info->pf_vid)
- vlan |= vf_info->pf_vid;
- else
- vlan |= vf_info->sw_vid;
- } else if (vf_info->pf_vid) {
- return FM10K_ERR_PARAM;
- }
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+ else
+ vlan = err;
/* notify switch of request for new multicast address */
- err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, mac, vlan,
- !(vlan & FM10K_VLAN_CLEAR));
+ err = hw->mac.ops.update_mc_addr(hw, vf_info->glort,
+ mac, vlan, set);
}
return err;
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists