| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1442499839-22762-6-git-send-email-Yuval.Mintz@qlogic.com>
Date: Thu, 17 Sep 2015 17:23:54 +0300
From: Yuval Mintz <Yuval.Mintz@...gic.com>
To: <netdev@...r.kernel.org>
CC: <Ariel.Elior@...gic.com>, <Yuval.Mintz@...gic.com>,
Sudarsana Kalluru <Sudarsana.Kalluru@...gic.com>
Subject: [RFC v2 net-next 05/10] qede: Add basic network device support
From: Sudarsana Kalluru <Sudarsana.Kalluru@...gic.com>
This patch includes the basic Rx/Tx support for the driver [although
carrier will still never be turned on].
Following this patch the driver registers a network device, initializes
it and prepares it for traffic.
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@...gic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@...gic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@...gic.com>
---
drivers/net/ethernet/qlogic/qede/qede.h | 132 ++
drivers/net/ethernet/qlogic/qede/qede_main.c | 1801 ++++++++++++++++++++++++++
2 files changed, 1933 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index 7e2bcfa..7680106 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -36,6 +36,8 @@
#define DRV_MODULE_SYM qede
+#define QEDE_NAPI_WEIGHT (NAPI_POLL_WEIGHT)
+
struct qede_dev {
struct qed_dev *cdev;
struct net_device *ndev;
@@ -51,6 +53,7 @@ struct qede_dev {
#define QEDE_MAX_TSS_CNT(edev) ((edev)->dev_info.num_queues * \
(edev)->dev_info.num_tc)
+ struct qede_fastpath *fp_array;
u16 num_rss;
u8 num_tc;
#define QEDE_RSS_CNT(edev) ((edev)->num_rss)
@@ -58,6 +61,9 @@ struct qede_dev {
(edev)->num_tc)
#define QEDE_TSS_IDX(edev, txqidx) ((txqidx) % (edev)->num_rss)
#define QEDE_TC_IDX(edev, txqidx) ((txqidx) / (edev)->num_rss)
+#define QEDE_TX_QUEUE(edev, txqidx) \
+ (&(edev)->fp_array[QEDE_TSS_IDX((edev), (txqidx))].txqs[QEDE_TC_IDX( \
+ (edev), (txqidx))])
struct qed_int_info int_info;
unsigned char primary_mac[ETH_ALEN];
@@ -65,9 +71,135 @@ struct qede_dev {
/* Smaller private varaiant of the RTNL lock */
struct mutex qede_lock;
u32 state; /* Protected by qede_lock */
+ u16 rx_buf_size;
+ /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */
+#define ETH_OVERHEAD (ETH_HLEN + 8 + 8)
+ /* Max supported alignment is 256 (8 shift)
+ * minimal alignment shift 6 is optimal for 57xxx HW performance
+ */
+#define QEDE_RX_ALIGN_SHIFT max(6, min(8, L1_CACHE_SHIFT))
+ /* We assume skb_build() uses sizeof(struct skb_shared_info) bytes
+ * at the end of skb->data, to avoid wasting a full cache line.
+ * This reduces memory use (skb->truesize).
+ */
+#define QEDE_FW_RX_ALIGN_END \
+ max_t(u64, 1UL << QEDE_RX_ALIGN_SHIFT, \
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+
+ struct qed_update_vport_rss_params rss_params;
+ u16 q_num_rx_buffers; /* Must be a power of two */
+ u16 q_num_tx_buffers; /* Must be a power of two */
+};
+
+enum QEDE_STATE {
+ QEDE_STATE_CLOSED,
+ QEDE_STATE_OPEN,
+};
+
+#define U64_LO(x) ((u32)(((u64)(x)) & 0xffffffff))
+#define U64_HI(x) ((u32)(((u64)(x)) >> 32))
+#define HILO_U64(hi, lo) ((((u64)(hi)) << 32) + (lo))
+
+#define MAX_NUM_TC 8
+#define MAX_NUM_PRI 8
+
+/* The driver supports the new build_skb() API:
+ * RX ring buffer contains pointer to kmalloc() data only,
+ * skb are built only after the frame was DMA-ed.
+ */
+struct sw_rx_data {
+ u8 *data;
+
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+};
+
+struct qede_rx_queue {
+ __le16 *hw_cons_ptr;
+ struct sw_rx_data *sw_rx_ring;
+ u16 sw_rx_cons;
+ u16 sw_rx_prod;
+ struct qed_chain rx_bd_ring;
+ struct qed_chain rx_comp_ring;
+ void __iomem *hw_rxq_prod_addr;
+
+ int rx_buf_size;
+
+ u16 num_rx_buffers;
+ u16 rxq_id;
+
+ u64 rx_hw_errors;
+ u64 rx_alloc_errors;
+};
+
+union db_prod {
+ struct eth_db_data data;
+ u32 raw;
+};
+
+struct sw_tx_bd {
+ struct sk_buff *skb;
+ u8 flags;
+/* Set on the first BD descriptor when there is a split BD */
+#define QEDE_TSO_SPLIT_BD BIT(0)
+};
+
+struct qede_tx_queue {
+ int index; /* Queue index */
+ __le16 *hw_cons_ptr;
+ struct sw_tx_bd *sw_tx_ring;
+ u16 sw_tx_cons;
+ u16 sw_tx_prod;
+ struct qed_chain tx_pbl;
+ void __iomem *doorbell_addr;
+ union db_prod tx_db;
+
+ u16 num_tx_buffers;
+};
+
+#define BD_UNMAP_ADDR(bd) HILO_U64(le32_to_cpu((bd)->addr.hi), \
+ le32_to_cpu((bd)->addr.lo))
+#define BD_SET_UNMAP_ADDR_LEN(bd, maddr, len) \
+ do { \
+ (bd)->addr.hi = cpu_to_le32(U64_HI(maddr)); \
+ (bd)->addr.lo = cpu_to_le32(U64_LO(maddr)); \
+ (bd)->nbytes = cpu_to_le16(len); \
+ } while (0)
+#define BD_UNMAP_LEN(bd) (le16_to_cpu((bd)->nbytes))
+
+struct qede_fastpath {
+ struct qede_dev *edev;
+ u8 rss_id;
+ struct napi_struct napi;
+ struct qed_sb_info *sb_info;
+ struct qede_rx_queue *rxq;
+ struct qede_tx_queue *txqs;
+
+#define VEC_NAME_SIZE (sizeof(((struct net_device *)0)->name) + 8)
+ char name[VEC_NAME_SIZE];
};
/* Debug print definitions */
#define DP_NAME(edev) ((edev)->ndev->name)
+#define XMIT_PLAIN 0
+#define XMIT_L4_CSUM BIT(0)
+#define XMIT_LSO BIT(1)
+#define XMIT_ENC BIT(2)
+
+#define QEDE_CSUM_ERROR BIT(0)
+#define QEDE_CSUM_UNNECESSARY BIT(1)
+#define RX_RING_SIZE_POW 13
+#define RX_RING_SIZE BIT(RX_RING_SIZE_POW)
+#define NUM_RX_BDS_MAX (RX_RING_SIZE - 1)
+#define NUM_RX_BDS_MIN 128
+#define NUM_RX_BDS_DEF NUM_RX_BDS_MAX
+
+#define TX_RING_SIZE_POW 13
+#define TX_RING_SIZE BIT(TX_RING_SIZE_POW)
+#define NUM_TX_BDS_MAX (TX_RING_SIZE - 1)
+#define NUM_TX_BDS_MIN 128
+#define NUM_TX_BDS_DEF NUM_TX_BDS_MAX
+
+#define for_each_rss(i) for (i = 0; i < edev->num_rss; i++)
+
#endif /* _QEDE_H_ */
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 35065dc..14e0b09 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -85,6 +85,8 @@ static int qede_probe(struct pci_dev *pdev, const struct pci_device_id *id);
#define TX_TIMEOUT (5 * HZ)
static void qede_remove(struct pci_dev *pdev);
+static int qede_alloc_rx_buffer(struct qede_dev *edev,
+ struct qede_rx_queue *rxq);
static struct pci_driver qede_pci_driver = {
.name = "qede",
@@ -93,6 +95,41 @@ static struct pci_driver qede_pci_driver = {
.remove = qede_remove,
};
+static int qede_netdev_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ struct net_device *ndev = netdev_notifier_info_to_dev(ptr);
+ struct ethtool_drvinfo drvinfo;
+ struct qede_dev *edev;
+
+ /* Currently only support name change */
+ if (event != NETDEV_CHANGENAME)
+ goto done;
+
+ /* Check whether this is a qede device */
+ if (!ndev || !ndev->ethtool_ops || !ndev->ethtool_ops->get_drvinfo)
+ goto done;
+
+ memset(&drvinfo, 0, sizeof(drvinfo));
+ ndev->ethtool_ops->get_drvinfo(ndev, &drvinfo);
+ if (strcmp(drvinfo.driver, "qede"))
+ goto done;
+ edev = netdev_priv(ndev);
+
+ /* Notify qed of the name change */
+ if (!edev->ops || !edev->ops->common)
+ goto done;
+ edev->ops->common->set_id(edev->cdev, edev->ndev->name,
+ "qede");
+
+done:
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block qede_netdev_notifier = {
+ .notifier_call = qede_netdev_event,
+};
+
static
int __init qede_init(void)
{
@@ -115,9 +152,20 @@ int __init qede_init(void)
return -EINVAL;
}
+ /* Must register notifier before pci ops, since we might miss
+ * interface rename after pci probe and netdev registeration.
+ */
+ ret = register_netdevice_notifier(&qede_netdev_notifier);
+ if (ret) {
+ pr_notice("Failed to register netdevice_notifier\n");
+ qed_put_eth_ops();
+ return -EINVAL;
+ }
+
ret = pci_register_driver(&qede_pci_driver);
if (ret) {
pr_notice("Failed to register driver\n");
+ unregister_netdevice_notifier(&qede_netdev_notifier);
qed_put_eth_ops();
return -EINVAL;
}
@@ -129,6 +177,7 @@ static void __exit qede_cleanup(void)
{
pr_notice("qede_cleanup called\n");
+ unregister_netdevice_notifier(&qede_netdev_notifier);
pci_unregister_driver(&qede_pci_driver);
qed_put_eth_ops();
}
@@ -137,6 +186,858 @@ module_init(qede_init);
module_exit(qede_cleanup);
/* -------------------------------------------------------------------------
+ * START OF FAST-PATH
+ * -------------------------------------------------------------------------
+ */
+
+/* Unmap the data and free skb */
+static int qede_free_tx_pkt(struct qede_dev *edev,
+ struct qede_tx_queue *txq,
+ int *len)
+{
+ u16 idx = txq->sw_tx_cons & NUM_TX_BDS_MAX;
+ struct sk_buff *skb = txq->sw_tx_ring[idx].skb;
+ struct eth_tx_1st_bd *first_bd;
+ struct eth_tx_bd *tx_data_bd;
+ int bds_consumed = 0;
+ int nbds;
+ bool data_split = txq->sw_tx_ring[idx].flags & QEDE_TSO_SPLIT_BD;
+ int i, split_bd_len = 0;
+
+ if (unlikely(!skb)) {
+ DP_ERR(edev,
+ "skb is null for txq idx=%d txq->sw_tx_cons=%d txq->sw_tx_prod=%d\n",
+ idx, txq->sw_tx_cons, txq->sw_tx_prod);
+ return -1;
+ }
+
+ *len = skb->len;
+
+ first_bd = (struct eth_tx_1st_bd *)qed_chain_consume(&txq->tx_pbl);
+
+ bds_consumed++;
+
+ nbds = first_bd->data.nbds;
+
+ if (data_split) {
+ struct eth_tx_bd *split = (struct eth_tx_bd *)
+ qed_chain_consume(&txq->tx_pbl);
+ split_bd_len = BD_UNMAP_LEN(split);
+ bds_consumed++;
+ }
+ dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+ BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+ /* Unmap the data of the skb frags */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, bds_consumed++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_consume(&txq->tx_pbl);
+ dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+ }
+
+ while (bds_consumed++ < nbds)
+ qed_chain_consume(&txq->tx_pbl);
+
+ /* Free skb */
+ dev_kfree_skb_any(skb);
+ txq->sw_tx_ring[idx].skb = NULL;
+ txq->sw_tx_ring[idx].flags = 0;
+
+ return 0;
+}
+
+/* Unmap the data and free skb when mapping failed during start_xmit */
+static void qede_free_failed_tx_pkt(struct qede_dev *edev,
+ struct qede_tx_queue *txq,
+ struct eth_tx_1st_bd *first_bd,
+ int nbd,
+ bool data_split)
+{
+ u16 idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+ struct sk_buff *skb = txq->sw_tx_ring[idx].skb;
+ struct eth_tx_bd *tx_data_bd;
+ int i, split_bd_len = 0;
+
+ /* Return prod to its position before this skb was handled */
+ qed_chain_set_prod(&txq->tx_pbl,
+ le16_to_cpu(txq->tx_db.data.bd_prod),
+ first_bd);
+
+ first_bd = (struct eth_tx_1st_bd *)qed_chain_produce(&txq->tx_pbl);
+
+ if (data_split) {
+ struct eth_tx_bd *split = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ split_bd_len = BD_UNMAP_LEN(split);
+ nbd--;
+ }
+
+ dma_unmap_page(&edev->pdev->dev, BD_UNMAP_ADDR(first_bd),
+ BD_UNMAP_LEN(first_bd) + split_bd_len, DMA_TO_DEVICE);
+
+ /* Unmap the data of the skb frags */
+ for (i = 0; i < nbd; i++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ if (tx_data_bd->nbytes)
+ dma_unmap_page(&edev->pdev->dev,
+ BD_UNMAP_ADDR(tx_data_bd),
+ BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE);
+ }
+
+ /* Return again prod to its position before this skb was handled */
+ qed_chain_set_prod(&txq->tx_pbl,
+ le16_to_cpu(txq->tx_db.data.bd_prod),
+ first_bd);
+
+ /* Free skb */
+ dev_kfree_skb_any(skb);
+ txq->sw_tx_ring[idx].skb = NULL;
+ txq->sw_tx_ring[idx].flags = 0;
+}
+
+static u32 qede_xmit_type(struct qede_dev *edev,
+ struct sk_buff *skb,
+ int *ipv6_ext)
+{
+ u32 rc = XMIT_L4_CSUM;
+ __be16 l3_proto;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return XMIT_PLAIN;
+
+ l3_proto = vlan_get_protocol(skb);
+ if (l3_proto == htons(ETH_P_IPV6) &&
+ (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
+ *ipv6_ext = 1;
+
+ if (skb_is_gso(skb))
+ rc |= XMIT_LSO;
+
+ return rc;
+}
+
+static void qede_set_params_for_ipv6_ext(struct sk_buff *skb,
+ struct eth_tx_2nd_bd *second_bd,
+ struct eth_tx_3rd_bd *third_bd)
+{
+ u8 l4_proto;
+ u16 bd2_bits = 0, bd2_bits2 = 0;
+
+ bd2_bits2 |= (1 << ETH_TX_DATA_2ND_BD_IPV6_EXT_SHIFT);
+
+ bd2_bits |= ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) &
+ ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_MASK)
+ << ETH_TX_DATA_2ND_BD_L4_HDR_START_OFFSET_W_SHIFT;
+
+ bd2_bits2 |= (ETH_L4_PSEUDO_CSUM_CORRECT_LENGTH <<
+ ETH_TX_DATA_2ND_BD_L4_PSEUDO_CSUM_MODE_SHIFT);
+
+ if (vlan_get_protocol(skb) == htons(ETH_P_IPV6))
+ l4_proto = ipv6_hdr(skb)->nexthdr;
+ else
+ l4_proto = ip_hdr(skb)->protocol;
+
+ if (l4_proto == IPPROTO_UDP)
+ bd2_bits2 |= 1 << ETH_TX_DATA_2ND_BD_L4_UDP_SHIFT;
+
+ if (third_bd) {
+ third_bd->data.bitfields |=
+ ((tcp_hdrlen(skb) / 4) &
+ ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_MASK) <<
+ ETH_TX_DATA_3RD_BD_TCP_HDR_LEN_DW_SHIFT;
+ }
+
+ second_bd->data.bitfields = cpu_to_le16(bd2_bits);
+ second_bd->data.bitfields2 = cpu_to_le16(bd2_bits2);
+}
+
+static int map_frag_to_bd(struct qede_dev *edev,
+ skb_frag_t *frag,
+ struct eth_tx_bd *bd)
+{
+ dma_addr_t mapping;
+
+ /* Map skb non-linear frag data for DMA */
+ mapping = skb_frag_dma_map(&edev->pdev->dev, frag, 0,
+ skb_frag_size(frag),
+ DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+ DP_NOTICE(edev, "Unable to map frag - dropping packet\n");
+ return -ENOMEM;
+ }
+
+ /* Setup the data pointer of the frag data */
+ BD_SET_UNMAP_ADDR_LEN(bd, mapping, skb_frag_size(frag));
+
+ return 0;
+}
+
+/* Main transmit function */
+static
+netdev_tx_t qede_start_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+ struct netdev_queue *netdev_txq;
+ struct qede_tx_queue *txq;
+ struct eth_tx_1st_bd *first_bd;
+ struct eth_tx_2nd_bd *second_bd = NULL;
+ struct eth_tx_3rd_bd *third_bd = NULL;
+ struct eth_tx_bd *tx_data_bd = NULL;
+ u16 txq_index;
+ u8 nbd = 0;
+ dma_addr_t mapping;
+ int rc, frag_idx = 0, ipv6_ext = 0;
+ u8 xmit_type;
+ u16 idx;
+ u16 hlen;
+ bool data_split;
+
+ /* Get tx-queue context and netdev index */
+ txq_index = skb_get_queue_mapping(skb);
+ WARN_ON(txq_index >= QEDE_TSS_CNT(edev));
+ txq = QEDE_TX_QUEUE(edev, txq_index);
+ netdev_txq = netdev_get_tx_queue(ndev, txq_index);
+
+ /* Current code doesn't support SKB linearization, since the max number
+ * of skb frags can be passed in the FW HSI.
+ */
+ BUILD_BUG_ON(MAX_SKB_FRAGS > ETH_TX_MAX_BDS_PER_NON_LSO_PACKET);
+
+ WARN_ON(qed_chain_get_elem_left(&txq->tx_pbl) <
+ (MAX_SKB_FRAGS + 1));
+
+ xmit_type = qede_xmit_type(edev, skb, &ipv6_ext);
+
+ /* Fill the entry in the SW ring and the BDs in the FW ring */
+ idx = txq->sw_tx_prod & NUM_TX_BDS_MAX;
+ txq->sw_tx_ring[idx].skb = skb;
+ first_bd = (struct eth_tx_1st_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(first_bd, 0, sizeof(*first_bd));
+ first_bd->data.bd_flags.bitfields =
+ 1 << ETH_TX_1ST_BD_FLAGS_START_BD_SHIFT;
+
+ /* Map skb linear data for DMA and set in the first BD */
+ mapping = dma_map_single(&edev->pdev->dev, skb->data,
+ skb_headlen(skb), DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+ DP_NOTICE(edev, "SKB mapping failed\n");
+ qede_free_failed_tx_pkt(edev, txq, first_bd, 0, false);
+ return NETDEV_TX_OK;
+ }
+ nbd++;
+ BD_SET_UNMAP_ADDR_LEN(first_bd, mapping, skb_headlen(skb));
+
+ /* In case there is IPv6 with extension headers or LSO we need 2nd and
+ * 3rd BDs.
+ */
+ if (unlikely((xmit_type & XMIT_LSO) | ipv6_ext)) {
+ second_bd = (struct eth_tx_2nd_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(second_bd, 0, sizeof(*second_bd));
+
+ nbd++;
+ third_bd = (struct eth_tx_3rd_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+ memset(third_bd, 0, sizeof(*third_bd));
+
+ nbd++;
+ /* We need to fill in additional data in second_bd... */
+ tx_data_bd = (struct eth_tx_bd *)second_bd;
+ }
+
+ if (skb_vlan_tag_present(skb)) {
+ first_bd->data.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_VLAN_INSERTION_SHIFT;
+ }
+
+ /* Fill the parsing flags & params according to the requested offload */
+ if (xmit_type & XMIT_L4_CSUM) {
+ /* We don't re-calculate IP checksum as it is already done by
+ * the upper stack
+ */
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_L4_CSUM_SHIFT;
+
+ /* If the packet is IPv6 with extension header, indicate that
+ * to FW and pass few params, since the device cracker doesn't
+ * support parsing IPv6 with extension header/s.
+ */
+ if (unlikely(ipv6_ext))
+ qede_set_params_for_ipv6_ext(skb, second_bd, third_bd);
+ }
+
+ if (xmit_type & XMIT_LSO) {
+ first_bd->data.bd_flags.bitfields |=
+ (1 << ETH_TX_1ST_BD_FLAGS_LSO_SHIFT);
+ third_bd->data.lso_mss =
+ cpu_to_le16(skb_shinfo(skb)->gso_size);
+
+ first_bd->data.bd_flags.bitfields |=
+ 1 << ETH_TX_1ST_BD_FLAGS_IP_CSUM_SHIFT;
+ hlen = skb_transport_header(skb) +
+ tcp_hdrlen(skb) - skb->data;
+
+ /* @@@TBD - if will not be removed need to check */
+ third_bd->data.bitfields |=
+ (1 << ETH_TX_DATA_3RD_BD_HDR_NBD_SHIFT);
+
+ /* Make life easier for FW guys who can't deal with header and
+ * data on same BD. If we need to split, use the second bd...
+ */
+ if (unlikely(skb_headlen(skb) > hlen)) {
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "TSO split header size is %d (%x:%x)\n",
+ first_bd->nbytes, first_bd->addr.hi,
+ first_bd->addr.lo);
+
+ mapping = HILO_U64(le32_to_cpu(first_bd->addr.hi),
+ le32_to_cpu(first_bd->addr.lo)) +
+ hlen;
+
+ BD_SET_UNMAP_ADDR_LEN(tx_data_bd, mapping,
+ le16_to_cpu(first_bd->nbytes) -
+ hlen);
+
+ /* this marks the BD as one that has no
+ * individual mapping
+ */
+ txq->sw_tx_ring[idx].flags |= QEDE_TSO_SPLIT_BD;
+
+ first_bd->nbytes = cpu_to_le16(hlen);
+
+ tx_data_bd = (struct eth_tx_bd *)third_bd;
+ data_split = true;
+ }
+ }
+
+ /* Handle fragmented skb */
+ /* special handle for frags inside 2nd and 3rd bds.. */
+ while (tx_data_bd && frag_idx < skb_shinfo(skb)->nr_frags) {
+ rc = map_frag_to_bd(edev,
+ &skb_shinfo(skb)->frags[frag_idx],
+ tx_data_bd);
+ if (rc) {
+ qede_free_failed_tx_pkt(edev, txq, first_bd, nbd,
+ data_split);
+ return NETDEV_TX_OK;
+ }
+
+ if (tx_data_bd == (struct eth_tx_bd *)second_bd)
+ tx_data_bd = (struct eth_tx_bd *)third_bd;
+ else
+ tx_data_bd = NULL;
+
+ frag_idx++;
+ }
+
+ /* map last frags into 4th, 5th .... */
+ for (; frag_idx < skb_shinfo(skb)->nr_frags; frag_idx++, nbd++) {
+ tx_data_bd = (struct eth_tx_bd *)
+ qed_chain_produce(&txq->tx_pbl);
+
+ memset(tx_data_bd, 0, sizeof(*tx_data_bd));
+
+ rc = map_frag_to_bd(edev,
+ &skb_shinfo(skb)->frags[frag_idx],
+ tx_data_bd);
+ if (rc) {
+ qede_free_failed_tx_pkt(edev, txq, first_bd, nbd,
+ data_split);
+ return NETDEV_TX_OK;
+ }
+ }
+
+ /* update the first BD with the actual num BDs */
+ first_bd->data.nbds = nbd;
+
+ netdev_tx_sent_queue(netdev_txq, skb->len);
+
+ skb_tx_timestamp(skb);
+
+ /* Advance packet producer only before sending the packet since mapping
+ * of pages may fail.
+ */
+ txq->sw_tx_prod++;
+
+ /* 'next page' entries are counted in the producer value */
+ txq->tx_db.data.bd_prod =
+ cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl));
+
+ /* wmb makes sure that the BDs data is updated before updating the
+ * producer, otherwise FW may read old data from the BDs.
+ */
+ wmb();
+ barrier();
+ writel(txq->tx_db.raw, txq->doorbell_addr);
+
+ /* mmiowb is needed to synchronize doorbell writes from more than one
+ * processor. It guarantees that the write arrives to the device before
+ * the queue lock is released and another start_xmit is called (possibly
+ * on another CPU). Without this barrier, the next doorbell can bypass
+ * this doorbell. This is applicable to IA64/Altix systems.
+ */
+ mmiowb();
+
+ if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl)
+ < (MAX_SKB_FRAGS + 1))) {
+ netif_tx_stop_queue(netdev_txq);
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "Stop queue was called\n");
+ /* paired memory barrier is in qede_tx_int(), we have to keep
+ * ordering of set_bit() in netif_tx_stop_queue() and read of
+ * fp->bd_tx_cons
+ */
+ smp_mb();
+
+ if (qed_chain_get_elem_left(&txq->tx_pbl)
+ >= (MAX_SKB_FRAGS + 1) &&
+ (edev->state == QEDE_STATE_OPEN)) {
+ netif_tx_wake_queue(netdev_txq);
+ DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED,
+ "Wake queue was called\n");
+ }
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int qede_txq_has_work(struct qede_tx_queue *txq)
+{
+ u16 hw_bd_cons;
+
+ /* Tell compiler that consumer and producer can change */
+ barrier();
+ hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+ if (qed_chain_get_cons_idx(&txq->tx_pbl) == hw_bd_cons + 1)
+ return 0;
+
+ return hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl);
+}
+
+static int qede_tx_int(struct qede_dev *edev,
+ struct qede_tx_queue *txq)
+{
+ struct netdev_queue *netdev_txq;
+ u16 hw_bd_cons;
+ unsigned int pkts_compl = 0, bytes_compl = 0;
+ int rc;
+
+ netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index);
+
+ hw_bd_cons = le16_to_cpu(*txq->hw_cons_ptr);
+ barrier();
+
+ while (hw_bd_cons != qed_chain_get_cons_idx(&txq->tx_pbl)) {
+ int len = 0;
+
+ rc = qede_free_tx_pkt(edev, txq, &len);
+ if (rc) {
+ DP_NOTICE(edev, "hw_bd_cons = %d, chain_cons=%d\n",
+ hw_bd_cons,
+ qed_chain_get_cons_idx(&txq->tx_pbl));
+ break;
+ }
+
+ bytes_compl += len;
+ pkts_compl++;
+ txq->sw_tx_cons++;
+ }
+
+ netdev_tx_completed_queue(netdev_txq, pkts_compl, bytes_compl);
+
+ /* Need to make the tx_bd_cons update visible to start_xmit()
+ * before checking for netif_tx_queue_stopped(). Without the
+ * memory barrier, there is a small possibility that
+ * start_xmit() will miss it and cause the queue to be stopped
+ * forever.
+ * On the other hand we need an rmb() here to ensure the proper
+ * ordering of bit testing in the following
+ * netif_tx_queue_stopped(txq) call.
+ */
+ smp_mb();
+
+ if (unlikely(netif_tx_queue_stopped(netdev_txq))) {
+ /* Taking tx_lock is needed to prevent reenabling the queue
+ * while it's empty. This could have happen if rx_action() gets
+ * suspended in qede_tx_int() after the condition before
+ * netif_tx_wake_queue(), while tx_action (qede_start_xmit()):
+ *
+ * stops the queue->sees fresh tx_bd_cons->releases the queue->
+ * sends some packets consuming the whole queue again->
+ * stops the queue
+ */
+
+ __netif_tx_lock(netdev_txq, smp_processor_id());
+
+ if ((netif_tx_queue_stopped(netdev_txq)) &&
+ (edev->state == QEDE_STATE_OPEN) &&
+ (qed_chain_get_elem_left(&txq->tx_pbl)
+ >= (MAX_SKB_FRAGS + 1))) {
+ netif_tx_wake_queue(netdev_txq);
+ DP_VERBOSE(edev, NETIF_MSG_TX_DONE,
+ "Wake queue was called\n");
+ }
+
+ __netif_tx_unlock(netdev_txq);
+ }
+
+ return 0;
+}
+
+static bool qede_has_rx_work(struct qede_rx_queue *rxq)
+{
+ u16 hw_comp_cons, sw_comp_cons;
+
+ /* Tell compiler that status block fields can change */
+ barrier();
+
+ hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+ return hw_comp_cons != sw_comp_cons;
+}
+
+static bool qede_has_tx_work(struct qede_fastpath *fp)
+{
+ u8 tc;
+
+ for (tc = 0; tc < fp->edev->num_tc; tc++)
+ if (qede_txq_has_work(&fp->txqs[tc]))
+ return true;
+ return false;
+}
+
+/* This function copies the Rx buffer from the CONS position to the PROD
+ * position, since we failed to allocate a new Rx buffer.
+ */
+static void qede_reuse_rx_data(struct qede_rx_queue *rxq)
+{
+ struct eth_rx_bd *rx_bd_cons = qed_chain_consume(&rxq->rx_bd_ring);
+ struct eth_rx_bd *rx_bd_prod = qed_chain_produce(&rxq->rx_bd_ring);
+ struct sw_rx_data *sw_rx_data_cons =
+ &rxq->sw_rx_ring[rxq->sw_rx_cons & NUM_RX_BDS_MAX];
+ struct sw_rx_data *sw_rx_data_prod =
+ &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+
+ dma_unmap_addr_set(sw_rx_data_prod, mapping,
+ dma_unmap_addr(sw_rx_data_cons, mapping));
+
+ sw_rx_data_prod->data = sw_rx_data_cons->data;
+ memcpy(rx_bd_prod, rx_bd_cons, sizeof(struct eth_rx_bd));
+
+ rxq->sw_rx_cons++;
+ rxq->sw_rx_prod++;
+}
+
+static inline void qede_update_rx_prod(struct qede_dev *edev,
+ struct qede_rx_queue *rxq)
+{
+ u16 bd_prod = qed_chain_get_prod_idx(&rxq->rx_bd_ring);
+ u16 cqe_prod = qed_chain_get_prod_idx(&rxq->rx_comp_ring);
+ struct eth_rx_prod_data rx_prods = {0};
+
+ /* Update producers */
+ rx_prods.bd_prod = cpu_to_le16(bd_prod);
+ rx_prods.cqe_prod = cpu_to_le16(cqe_prod);
+
+ /* Make sure that the BD and SGE data is updated before updating the
+ * producers since FW might read the BD/SGE right after the producer
+ * is updated.
+ */
+ wmb();
+
+ internal_ram_wr(rxq->hw_rxq_prod_addr, sizeof(rx_prods),
+ (u32 *)&rx_prods);
+
+ /* mmiowb is needed to synchronize doorbell writes from more than one
+ * processor. It guarantees that the write arrives to the device before
+ * the napi lock is released and another qede_poll is called (possibly
+ * on another CPU). Without this barrier, the next doorbell can bypass
+ * this doorbell. This is applicable to IA64/Altix systems.
+ */
+ mmiowb();
+}
+
+static u32 qede_get_rxhash(struct qede_dev *edev,
+ u8 bitfields,
+ __le32 rss_hash,
+ enum pkt_hash_types *rxhash_type)
+{
+ enum rss_hash_type htype;
+
+ htype = GET_FIELD(bitfields, ETH_FAST_PATH_RX_REG_CQE_RSS_HASH_TYPE);
+
+ if ((edev->ndev->features & NETIF_F_RXHASH) && htype) {
+ *rxhash_type = ((htype == RSS_HASH_TYPE_IPV4) ||
+ (htype == RSS_HASH_TYPE_IPV6)) ?
+ PKT_HASH_TYPE_L3 : PKT_HASH_TYPE_L4;
+ return le32_to_cpu(rss_hash);
+ }
+ *rxhash_type = PKT_HASH_TYPE_NONE;
+ return 0;
+}
+
+static void qede_set_skb_csum(struct sk_buff *skb, u8 csum_flag)
+{
+ skb_checksum_none_assert(skb);
+
+ if (csum_flag & QEDE_CSUM_UNNECESSARY)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static inline void qede_skb_receive(struct qede_dev *edev,
+ struct qede_fastpath *fp,
+ struct sk_buff *skb,
+ u16 vlan_tag)
+{
+ if (vlan_tag)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+ vlan_tag);
+
+ napi_gro_receive(&fp->napi, skb);
+}
+
+static u8 qede_check_csum(u16 flag)
+{
+ u16 csum_flag = 0;
+ u8 csum = 0;
+
+ if ((PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED_SHIFT) & flag) {
+ csum_flag |= PARSING_AND_ERR_FLAGS_L4CHKSMERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_L4CHKSMERROR_SHIFT;
+ csum = QEDE_CSUM_UNNECESSARY;
+ }
+
+ csum_flag |= PARSING_AND_ERR_FLAGS_IPHDRERROR_MASK <<
+ PARSING_AND_ERR_FLAGS_IPHDRERROR_SHIFT;
+
+ if (csum_flag & flag)
+ return QEDE_CSUM_ERROR;
+
+ return csum;
+}
+
+static int qede_rx_int(struct qede_fastpath *fp, int budget)
+{
+ struct qede_dev *edev = fp->edev;
+ struct qede_rx_queue *rxq = fp->rxq;
+
+ u16 hw_comp_cons, sw_comp_cons, sw_rx_index, parse_flag;
+ int rx_pkt = 0;
+ u8 csum_flag;
+
+ hw_comp_cons = le16_to_cpu(*rxq->hw_cons_ptr);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+
+ /* Memory barrier to prevent the CPU from doing speculative reads of CQE
+ * / BD in the while-loop before reading hw_comp_cons. If the CQE is
+ * read before it is written by FW, then FW writes CQE and SB, and then
+ * the CPU reads the hw_comp_cons, it will use an old CQE.
+ */
+ rmb();
+
+ /* Loop to complete all indicated BDs */
+ while (sw_comp_cons != hw_comp_cons) {
+ struct eth_fast_path_rx_reg_cqe *fp_cqe;
+ enum pkt_hash_types rxhash_type;
+ enum eth_rx_cqe_type cqe_type;
+ struct sw_rx_data *sw_rx_data;
+ union eth_rx_cqe *cqe;
+ struct sk_buff *skb;
+ u16 len, pad;
+ u32 rx_hash;
+ u8 *data;
+
+ /* Get the CQE from the completion ring */
+ cqe = (union eth_rx_cqe *)
+ qed_chain_consume(&rxq->rx_comp_ring);
+ cqe_type = cqe->fast_path_regular.type;
+
+ if (unlikely(cqe_type == ETH_RX_CQE_TYPE_SLOW_PATH)) {
+ edev->ops->eth_cqe_completion(
+ edev->cdev, fp->rss_id,
+ (struct eth_slow_path_rx_cqe *)cqe);
+ goto next_cqe;
+ }
+
+ /* Get the data from the SW ring */
+ sw_rx_index = rxq->sw_rx_cons & NUM_RX_BDS_MAX;
+ sw_rx_data = &rxq->sw_rx_ring[sw_rx_index];
+ data = sw_rx_data->data;
+
+ fp_cqe = &cqe->fast_path_regular;
+ len = le16_to_cpu(fp_cqe->pkt_len);
+ pad = fp_cqe->placement_offset;
+
+ /* For every Rx BD consumed, we allocate a new BD so the BD ring
+ * is always with a fixed size. If allocation fails, we take the
+ * consumed BD and return it to the ring in the PROD position.
+ * The packet that was received on that BD will be dropped (and
+ * not passed to the upper stack).
+ */
+ if (likely(qede_alloc_rx_buffer(edev, rxq) == 0)) {
+ dma_unmap_single(&edev->pdev->dev,
+ dma_unmap_addr(sw_rx_data, mapping),
+ rxq->rx_buf_size, DMA_FROM_DEVICE);
+
+ /* If this is an error packet then drop it */
+ parse_flag =
+ le16_to_cpu(cqe->fast_path_regular.pars_flags.flags);
+ csum_flag = qede_check_csum(parse_flag);
+ if (QEDE_CSUM_ERROR == csum_flag) {
+ DP_NOTICE(edev,
+ "CQE in CONS = %u has error, flags = %x, dropping incoming packet\n",
+ sw_comp_cons, parse_flag);
+ rxq->rx_hw_errors++;
+ kfree(data);
+ goto next_rx;
+ }
+
+ skb = build_skb(data, 0);
+
+ if (unlikely(!skb)) {
+ DP_NOTICE(edev,
+ "Build_skb failed, dropping incoming packet\n");
+ kfree(data);
+ rxq->rx_alloc_errors++;
+ goto next_rx;
+ }
+
+ skb_reserve(skb, pad);
+
+ } else {
+ DP_NOTICE(edev,
+ "New buffer allocation failed, dropping incoming packet and reusing its buffer\n");
+ qede_reuse_rx_data(rxq);
+ rxq->rx_alloc_errors++;
+ goto next_cqe;
+ }
+
+ sw_rx_data->data = NULL;
+
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, edev->ndev);
+
+ rx_hash = qede_get_rxhash(edev, fp_cqe->bitfields,
+ fp_cqe->rss_hash,
+ &rxhash_type);
+
+ skb_set_hash(skb, rx_hash, rxhash_type);
+
+ qede_set_skb_csum(skb, csum_flag);
+
+ skb_record_rx_queue(skb, fp->rss_id);
+
+ qede_skb_receive(edev, fp, skb, le16_to_cpu(fp_cqe->vlan_tag));
+
+ qed_chain_consume(&rxq->rx_bd_ring);
+
+next_rx:
+ rxq->sw_rx_cons++;
+ rx_pkt++;
+
+next_cqe: /* don't consume bd rx buffer */
+ qed_chain_recycle_consumed(&rxq->rx_comp_ring);
+ sw_comp_cons = qed_chain_get_cons_idx(&rxq->rx_comp_ring);
+ /* CR TPA - revisit how to handle budget in TPA perhaps
+ * increase on "end"
+ */
+ if (rx_pkt == budget)
+ break;
+ } /* repeat while sw_comp_cons != hw_comp_cons... */
+
+ /* Update producers */
+ qede_update_rx_prod(edev, rxq);
+
+ return rx_pkt;
+}
+
+static int qede_poll(struct napi_struct *napi, int budget)
+{
+ int work_done = 0;
+ struct qede_fastpath *fp = container_of(napi, struct qede_fastpath,
+ napi);
+ struct qede_dev *edev = fp->edev;
+
+ while (1) {
+ u8 tc;
+
+ for (tc = 0; tc < edev->num_tc; tc++)
+ if (qede_txq_has_work(&fp->txqs[tc]))
+ qede_tx_int(edev, &fp->txqs[tc]);
+
+ if (qede_has_rx_work(fp->rxq)) {
+ work_done += qede_rx_int(fp, budget - work_done);
+
+ /* must not complete if we consumed full budget */
+ if (work_done >= budget)
+ break;
+ }
+
+ /* Fall out from the NAPI loop if needed */
+ if (!(qede_has_rx_work(fp->rxq) || qede_has_tx_work(fp))) {
+ qed_sb_update_sb_idx(fp->sb_info);
+ /* *_has_*_work() reads the status block,
+ * thus we need to ensure that status block indices
+ * have been actually read (qed_sb_update_sb_idx)
+ * prior to this check (*_has_*_work) so that
+ * we won't write the "newer" value of the status block
+ * to HW (if there was a DMA right after
+ * qede_has_rx_work and if there is no rmb, the memory
+ * reading (qed_sb_update_sb_idx) may be postponed
+ * to right before *_ack_sb). In this case there
+ * will never be another interrupt until there is
+ * another update of the status block, while there
+ * is still unhandled work.
+ */
+ rmb();
+
+ if (!(qede_has_rx_work(fp->rxq) ||
+ qede_has_tx_work(fp))) {
+ napi_complete(napi);
+ /* Update and reenable interrupts */
+ qed_sb_ack(fp->sb_info, IGU_INT_ENABLE,
+ 1 /*update*/);
+ break;
+ }
+ }
+ }
+
+ return work_done;
+}
+
+static irqreturn_t qede_msix_fp_int(int irq, void *fp_cookie)
+{
+ struct qede_fastpath *fp = fp_cookie;
+
+ qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/);
+
+ napi_schedule_irqoff(&fp->napi);
+ return IRQ_HANDLED;
+}
+
+/* -------------------------------------------------------------------------
+ * END OF FAST-PATH
+ * -------------------------------------------------------------------------
+ */
+
+static int qede_open(struct net_device *ndev);
+static int qede_close(struct net_device *ndev);
+static const struct net_device_ops qede_netdev_ops = {
+ .ndo_open = qede_open,
+ .ndo_stop = qede_close,
+ .ndo_start_xmit = qede_start_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* -------------------------------------------------------------------------
* START OF PROBE / REMOVE
* -------------------------------------------------------------------------
*/
@@ -165,6 +1066,8 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
edev->dp_module = dp_module;
edev->dp_level = dp_level;
edev->ops = qed_ops;
+ edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+ edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
DP_INFO(edev, "Allocated netdev with 64 tx queues and 64 rx queues\n");
@@ -192,6 +1095,8 @@ static void qede_init_ndev(struct qede_dev *edev)
ndev->watchdog_timeo = TX_TIMEOUT;
+ ndev->netdev_ops = &qede_netdev_ops;
+
/* user-changeble features */
hw_features = NETIF_F_GRO | NETIF_F_SG |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -235,6 +1140,64 @@ static void qede_config_debug(uint debug, u32 *p_dp_module, u8 *p_dp_level)
}
}
+static void qede_free_fp_array(struct qede_dev *edev)
+{
+ if (edev->fp_array) {
+ struct qede_fastpath *fp;
+ int i;
+
+ for_each_rss(i) {
+ fp = &edev->fp_array[i];
+
+ kfree(fp->sb_info);
+ kfree(fp->rxq);
+ kfree(fp->txqs);
+ }
+ kfree(edev->fp_array);
+ }
+ edev->num_rss = 0;
+}
+
+static int qede_alloc_fp_array(struct qede_dev *edev)
+{
+ struct qede_fastpath *fp;
+ int i;
+
+ edev->fp_array = kcalloc(QEDE_RSS_CNT(edev),
+ sizeof(*edev->fp_array), GFP_KERNEL);
+ if (!edev->fp_array) {
+ DP_NOTICE(edev, "fp array allocation failed\n");
+ goto err;
+ }
+
+ for_each_rss(i) {
+ fp = &edev->fp_array[i];
+
+ fp->sb_info = kcalloc(1, sizeof(*fp->sb_info), GFP_KERNEL);
+ if (!fp->sb_info) {
+ DP_NOTICE(edev, "sb info struct allocation failed\n");
+ goto err;
+ }
+
+ fp->rxq = kcalloc(1, sizeof(*fp->rxq), GFP_KERNEL);
+ if (!fp->rxq) {
+ DP_NOTICE(edev, "RXQ struct allocation failed\n");
+ goto err;
+ }
+
+ fp->txqs = kcalloc(edev->num_tc, sizeof(*fp->txqs), GFP_KERNEL);
+ if (!fp->txqs) {
+ DP_NOTICE(edev, "TXQ array allocation failed\n");
+ goto err;
+ }
+ }
+
+ return 0;
+err:
+ qede_free_fp_array(edev);
+ return -ENOMEM;
+}
+
static void qede_update_pf_params(struct qed_dev *cdev)
{
struct qed_pf_params pf_params;
@@ -298,12 +1261,20 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level,
qede_init_ndev(edev);
+ rc = register_netdev(edev->ndev);
+ if (rc) {
+ DP_NOTICE(edev, "Cannot register net-device\n");
+ goto err3;
+ }
+
edev->ops->common->set_id(cdev, edev->ndev->name, DRV_MODULE_VERSION);
DP_INFO(edev, "Ending successfully qede probe\n");
return 0;
+err3:
+ free_netdev(edev->ndev);
err2:
qed_ops->common->slowpath_stop(cdev);
err1:
@@ -335,6 +1306,8 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
DP_INFO(edev, "Starting qede_remove\n");
+ unregister_netdev(ndev);
+
edev->ops->common->set_power_state(cdev, PCI_D0);
pci_set_drvdata(pdev, NULL);
@@ -352,3 +1325,831 @@ static void qede_remove(struct pci_dev *pdev)
{
__qede_remove(pdev, QEDE_REMOVE_NORMAL);
}
+
+/* -------------------------------------------------------------------------
+ * START OF LOAD / UNLOAD
+ * -------------------------------------------------------------------------
+ */
+
+static int qede_set_num_queues(struct qede_dev *edev)
+{
+ int rc;
+ u16 rss_num;
+
+ /* Setup queues according to possible resources*/
+ rss_num = netif_get_num_default_rss_queues() *
+ edev->dev_info.common.num_hwfns;
+
+ rss_num = min_t(u16, QEDE_MAX_RSS_CNT(edev), rss_num);
+
+ rc = edev->ops->common->set_fp_int(edev->cdev, rss_num);
+ if (rc > 0) {
+ /* Managed to request interrupts for our queues */
+ edev->num_rss = rc;
+ DP_INFO(edev, "Managed %d [of %d] RSS queues\n",
+ QEDE_RSS_CNT(edev), rss_num);
+ rc = 0;
+ }
+ return rc;
+}
+
+static void qede_free_mem_sb(struct qede_dev *edev,
+ struct qed_sb_info *sb_info)
+{
+ if (sb_info->sb_virt)
+ dma_free_coherent(&edev->pdev->dev, sizeof(*sb_info->sb_virt),
+ (void *)sb_info->sb_virt, sb_info->sb_phys);
+}
+
+/* This function allocates fast-path status block memory */
+static int qede_alloc_mem_sb(struct qede_dev *edev,
+ struct qed_sb_info *sb_info,
+ u16 sb_id)
+{
+ struct status_block *sb_virt;
+ dma_addr_t sb_phys;
+ int rc;
+
+ sb_virt = dma_alloc_coherent(&edev->pdev->dev,
+ sizeof(*sb_virt),
+ &sb_phys, GFP_KERNEL);
+ if (!sb_virt) {
+ DP_ERR(edev, "Status block allocation failed\n");
+ return -ENOMEM;
+ }
+
+ rc = edev->ops->common->sb_init(edev->cdev, sb_info,
+ sb_virt, sb_phys, sb_id,
+ QED_SB_TYPE_L2_QUEUE);
+ if (rc) {
+ DP_ERR(edev, "Status block initialization failed\n");
+ dma_free_coherent(&edev->pdev->dev, sizeof(*sb_virt),
+ sb_virt, sb_phys);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void qede_free_rx_buffers(struct qede_dev *edev,
+ struct qede_rx_queue *rxq)
+{
+ u16 i;
+
+ for (i = rxq->sw_rx_cons; i != rxq->sw_rx_prod; i++) {
+ struct sw_rx_data *rx_buf;
+ u8 *data;
+
+ rx_buf = &rxq->sw_rx_ring[i & NUM_RX_BDS_MAX];
+ data = rx_buf->data;
+
+ dma_unmap_single(&edev->pdev->dev,
+ dma_unmap_addr(rx_buf, mapping),
+ rxq->rx_buf_size, DMA_FROM_DEVICE);
+
+ rx_buf->data = NULL;
+ kfree(data);
+ }
+}
+
+static void qede_free_mem_rxq(struct qede_dev *edev,
+ struct qede_rx_queue *rxq)
+{
+ /* Free rx buffers */
+ qede_free_rx_buffers(edev, rxq);
+
+ /* Free the parallel SW ring */
+ kfree(rxq->sw_rx_ring);
+
+ /* Free the real RQ ring used by FW */
+ edev->ops->common->chain_free(edev->cdev, &rxq->rx_bd_ring);
+ edev->ops->common->chain_free(edev->cdev, &rxq->rx_comp_ring);
+}
+
+static int qede_alloc_rx_buffer(struct qede_dev *edev,
+ struct qede_rx_queue *rxq)
+{
+ struct sw_rx_data *sw_rx_data;
+ struct eth_rx_bd *rx_bd;
+ dma_addr_t mapping;
+ u16 rx_buf_size;
+ u8 *data;
+
+ rx_buf_size = rxq->rx_buf_size;
+
+ data = kmalloc(rx_buf_size, GFP_ATOMIC);
+ if (unlikely(!data)) {
+ DP_NOTICE(edev, "Failed to allocate Rx data\n");
+ return -ENOMEM;
+ }
+
+ mapping = dma_map_single(&edev->pdev->dev, data,
+ rx_buf_size, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) {
+ kfree(data);
+ DP_NOTICE(edev, "Failed to map Rx buffer\n");
+ return -ENOMEM;
+ }
+
+ sw_rx_data = &rxq->sw_rx_ring[rxq->sw_rx_prod & NUM_RX_BDS_MAX];
+ sw_rx_data->data = data;
+
+ dma_unmap_addr_set(sw_rx_data, mapping, mapping);
+
+ /* Advance PROD and get BD pointer */
+ rx_bd = (struct eth_rx_bd *)qed_chain_produce(&rxq->rx_bd_ring);
+ WARN_ON(!rx_bd);
+ rx_bd->addr.hi = cpu_to_le32(U64_HI(mapping));
+ rx_bd->addr.lo = cpu_to_le32(U64_LO(mapping));
+
+ rxq->sw_rx_prod++;
+
+ return 0;
+}
+
+/* This function allocates all memory needed per Rx queue */
+static int qede_alloc_mem_rxq(struct qede_dev *edev,
+ struct qede_rx_queue *rxq)
+{
+ int i, rc, size, num_allocated;
+
+ rxq->num_rx_buffers = edev->q_num_rx_buffers;
+
+ rxq->rx_buf_size = NET_IP_ALIGN +
+ ETH_OVERHEAD +
+ edev->ndev->mtu +
+ QEDE_FW_RX_ALIGN_END;
+
+ /* Allocate the parallel driver ring for Rx buffers */
+ size = sizeof(*rxq->sw_rx_ring) * NUM_RX_BDS_MAX;
+ rxq->sw_rx_ring = kzalloc(size, GFP_KERNEL);
+ if (!rxq->sw_rx_ring) {
+ DP_ERR(edev, "Rx buffers ring allocation failed\n");
+ goto err;
+ }
+
+ /* Allocate FW Rx ring */
+ rc = edev->ops->common->chain_alloc(edev->cdev,
+ QED_CHAIN_USE_TO_CONSUME_PRODUCE,
+ QED_CHAIN_MODE_NEXT_PTR,
+ NUM_RX_BDS_MAX,
+ sizeof(struct eth_rx_bd),
+ &rxq->rx_bd_ring);
+
+ if (rc)
+ goto err;
+
+ /* Allocate FW completion ring */
+ rc = edev->ops->common->chain_alloc(edev->cdev,
+ QED_CHAIN_USE_TO_CONSUME,
+ QED_CHAIN_MODE_PBL,
+ NUM_RX_BDS_MAX,
+ sizeof(union eth_rx_cqe),
+ &rxq->rx_comp_ring);
+ if (rc)
+ goto err;
+
+ /* Allocate buffers for the Rx ring */
+ for (i = 0; i < rxq->num_rx_buffers; i++) {
+ rc = qede_alloc_rx_buffer(edev, rxq);
+ if (rc)
+ break;
+ }
+ num_allocated = i;
+ if (!num_allocated) {
+ DP_ERR(edev, "Rx buffers allocation failed\n");
+ goto err;
+ } else if (num_allocated < rxq->num_rx_buffers) {
+ DP_NOTICE(edev,
+ "Allocated less buffers than desired (%d allocated)\n",
+ num_allocated);
+ }
+
+ return 0;
+
+err:
+ qede_free_mem_rxq(edev, rxq);
+ return -ENOMEM;
+}
+
+static void qede_free_mem_txq(struct qede_dev *edev,
+ struct qede_tx_queue *txq)
+{
+ /* Free the parallel SW ring */
+ kfree(txq->sw_tx_ring);
+
+ /* Free the real RQ ring used by FW */
+ edev->ops->common->chain_free(edev->cdev, &txq->tx_pbl);
+}
+
+/* This function allocates all memory needed per Tx queue */
+static int qede_alloc_mem_txq(struct qede_dev *edev,
+ struct qede_tx_queue *txq)
+{
+ int size, rc;
+ union eth_tx_bd_types *p_virt;
+
+ txq->num_tx_buffers = edev->q_num_tx_buffers;
+
+ /* Allocate the parallel driver ring for Tx buffers */
+ size = sizeof(*txq->sw_tx_ring) * NUM_TX_BDS_MAX;
+ txq->sw_tx_ring = kzalloc(size, GFP_KERNEL);
+ if (!txq->sw_tx_ring) {
+ DP_NOTICE(edev, "Tx buffers ring allocation failed\n");
+ goto err;
+ }
+
+ rc = edev->ops->common->chain_alloc(edev->cdev,
+ QED_CHAIN_USE_TO_CONSUME_PRODUCE,
+ QED_CHAIN_MODE_PBL,
+ NUM_TX_BDS_MAX,
+ sizeof(*p_virt),
+ &txq->tx_pbl);
+ if (rc)
+ goto err;
+
+ return 0;
+
+err:
+ qede_free_mem_txq(edev, txq);
+ return -ENOMEM;
+}
+
+/* This function frees all memory of a single fp */
+static void qede_free_mem_fp(struct qede_dev *edev,
+ struct qede_fastpath *fp)
+{
+ int tc;
+
+ qede_free_mem_sb(edev, fp->sb_info);
+
+ qede_free_mem_rxq(edev, fp->rxq);
+
+ for (tc = 0; tc < edev->num_tc; tc++)
+ qede_free_mem_txq(edev, &fp->txqs[tc]);
+}
+
+/* This function allocates all memory needed for a single fp (i.e. an entity
+ * which contains status block, one rx queue and multiple per-TC tx queues.
+ */
+static int qede_alloc_mem_fp(struct qede_dev *edev,
+ struct qede_fastpath *fp)
+{
+ int rc, tc;
+
+ rc = qede_alloc_mem_sb(edev, fp->sb_info, fp->rss_id);
+ if (rc)
+ goto err;
+
+ rc = qede_alloc_mem_rxq(edev, fp->rxq);
+ if (rc)
+ goto err;
+
+ for (tc = 0; tc < edev->num_tc; tc++) {
+ rc = qede_alloc_mem_txq(edev, &fp->txqs[tc]);
+ if (rc)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ qede_free_mem_fp(edev, fp);
+ return -ENOMEM;
+}
+
+static void qede_free_mem_load(struct qede_dev *edev)
+{
+ int i;
+
+ for_each_rss(i) {
+ struct qede_fastpath *fp = &edev->fp_array[i];
+
+ qede_free_mem_fp(edev, fp);
+ }
+}
+
+/* This function allocates all qede memory at NIC load. */
+static int qede_alloc_mem_load(struct qede_dev *edev)
+{
+ int rc = 0, rss_id;
+
+ for (rss_id = 0; rss_id < QEDE_RSS_CNT(edev); rss_id++) {
+ struct qede_fastpath *fp = &edev->fp_array[rss_id];
+
+ rc = qede_alloc_mem_fp(edev, fp);
+ if (rc)
+ break;
+ }
+
+ if (rss_id != QEDE_RSS_CNT(edev)) {
+ /* Failed allocating memory for all the queues */
+ if (!rss_id) {
+ DP_ERR(edev,
+ "Failed to allocate memory for the leading queue\n");
+ rc = -ENOMEM;
+ } else {
+ DP_NOTICE(edev,
+ "Failed to allocate memory for all of RSS queues\n Desired: %d queues, allocated: %d queues\n",
+ QEDE_RSS_CNT(edev), rss_id);
+ }
+ edev->num_rss = rss_id;
+ }
+
+ return 0;
+}
+
+/* This function inits fp content and resets the SB, RXQ and TXQ structures */
+static void qede_init_fp(struct qede_dev *edev)
+{
+ int rss_id, txq_index, tc;
+ struct qede_fastpath *fp;
+
+ for_each_rss(rss_id) {
+ fp = &edev->fp_array[rss_id];
+
+ fp->edev = edev;
+ fp->rss_id = rss_id;
+
+ memset((void *)&fp->napi, 0, sizeof(fp->napi));
+
+ memset((void *)fp->sb_info, 0, sizeof(*fp->sb_info));
+
+ memset((void *)fp->rxq, 0, sizeof(*fp->rxq));
+ fp->rxq->rxq_id = rss_id;
+
+ memset((void *)fp->txqs, 0, (edev->num_tc * sizeof(*fp->txqs)));
+ for (tc = 0; tc < edev->num_tc; tc++) {
+ txq_index = tc * QEDE_RSS_CNT(edev) + rss_id;
+ fp->txqs[tc].index = txq_index;
+ }
+
+ snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
+ edev->ndev->name, rss_id);
+ }
+}
+
+static int qede_set_real_num_queues(struct qede_dev *edev)
+{
+ int rc = 0;
+
+ rc = netif_set_real_num_tx_queues(edev->ndev, QEDE_TSS_CNT(edev));
+ if (rc) {
+ DP_NOTICE(edev, "Failed to set real number of Tx queues\n");
+ return rc;
+ }
+ rc = netif_set_real_num_rx_queues(edev->ndev, QEDE_RSS_CNT(edev));
+ if (rc) {
+ DP_NOTICE(edev, "Failed to set real number of Rx queues\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static void qede_napi_disable_remove(struct qede_dev *edev)
+{
+ int i;
+
+ for_each_rss(i) {
+ napi_disable(&edev->fp_array[i].napi);
+
+ netif_napi_del(&edev->fp_array[i].napi);
+ }
+}
+
+static void qede_napi_add_enable(struct qede_dev *edev)
+{
+ int i;
+
+ /* Add NAPI objects */
+ for_each_rss(i) {
+ netif_napi_add(edev->ndev, &edev->fp_array[i].napi,
+ qede_poll, QEDE_NAPI_WEIGHT);
+ napi_enable(&edev->fp_array[i].napi);
+ }
+}
+
+static void qede_sync_free_irqs(struct qede_dev *edev)
+{
+ int i;
+
+ for (i = 0; i < edev->int_info.used_cnt; i++) {
+ if (edev->int_info.msix_cnt) {
+ synchronize_irq(edev->int_info.msix[i].vector);
+ free_irq(edev->int_info.msix[i].vector,
+ &edev->fp_array[i]);
+ } else {
+ edev->ops->common->simd_handler_clean(edev->cdev, i);
+ }
+ }
+
+ edev->int_info.used_cnt = 0;
+}
+
+static int qede_req_msix_irqs(struct qede_dev *edev)
+{
+ int i, rc;
+
+ /* Sanitize number of interrupts == number of prepared RSS queues */
+ if (QEDE_RSS_CNT(edev) > edev->int_info.msix_cnt) {
+ DP_ERR(edev,
+ "Interrupt mismatch: %d RSS queues > %d MSI-x vectors\n",
+ QEDE_RSS_CNT(edev), edev->int_info.msix_cnt);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < QEDE_RSS_CNT(edev); i++) {
+ rc = request_irq(edev->int_info.msix[i].vector,
+ qede_msix_fp_int, 0, edev->fp_array[i].name,
+ &edev->fp_array[i]);
+ if (rc) {
+ DP_ERR(edev, "Request fp %d irq failed\n", i);
+ qede_sync_free_irqs(edev);
+ return rc;
+ }
+ DP_VERBOSE(edev, NETIF_MSG_INTR,
+ "Requested fp irq for %s [entry %d]. Cookie is at %p\n",
+ edev->fp_array[i].name, i,
+ &edev->fp_array[i]);
+ edev->int_info.used_cnt++;
+ }
+
+ return 0;
+}
+
+static void qede_simd_fp_handler(void *cookie)
+{
+ struct qede_fastpath *fp = (struct qede_fastpath *)cookie;
+
+ napi_schedule_irqoff(&fp->napi);
+}
+
+static int qede_setup_irqs(struct qede_dev *edev)
+{
+ int i, rc = 0;
+
+ /* Learn Interrupt configuration */
+ rc = edev->ops->common->get_fp_int(edev->cdev, &edev->int_info);
+ if (rc)
+ return rc;
+
+ if (edev->int_info.msix_cnt) {
+ rc = qede_req_msix_irqs(edev);
+ if (rc)
+ return rc;
+ edev->ndev->irq = edev->int_info.msix[0].vector;
+ } else {
+ const struct qed_common_ops *ops;
+
+ /* qed should learn receive the RSS ids and callbacks */
+ ops = edev->ops->common;
+ for (i = 0; i < QEDE_RSS_CNT(edev); i++)
+ ops->simd_handler_config(edev->cdev,
+ &edev->fp_array[i], i,
+ qede_simd_fp_handler);
+ edev->int_info.used_cnt = QEDE_RSS_CNT(edev);
+ }
+ return 0;
+}
+
+static int qede_drain_txq(struct qede_dev *edev,
+ struct qede_tx_queue *txq,
+ bool allow_drain)
+{
+ int rc, cnt = 1000;
+
+ while (txq->sw_tx_cons != txq->sw_tx_prod) {
+ if (!cnt) {
+ if (allow_drain) {
+ DP_NOTICE(edev,
+ "Tx queue[%d] is stuck, requesting MCP to drain\n",
+ txq->index);
+ rc = edev->ops->common->drain(edev->cdev);
+ if (rc)
+ return rc;
+ return qede_drain_txq(edev, txq, false);
+ }
+ DP_NOTICE(edev,
+ "Timeout waiting for tx queue[%d]: PROD=%d, CONS=%d\n",
+ txq->index, txq->sw_tx_prod,
+ txq->sw_tx_cons);
+ return -ENODEV;
+ }
+ cnt--;
+ usleep_range(1000, 2000);
+ barrier();
+ }
+
+ /* FW finished processing, wait for HW to transmit all tx packets */
+ usleep_range(1000, 2000);
+
+ return 0;
+}
+
+static int qede_stop_queues(struct qede_dev *edev)
+{
+ struct qed_update_vport_params vport_update_params;
+ struct qed_dev *cdev = edev->cdev;
+ int rc, tc, i;
+
+ /* Disable the vport */
+ memset(&vport_update_params, 0, sizeof(vport_update_params));
+ vport_update_params.vport_id = 0;
+ vport_update_params.update_vport_active_flg = 1;
+ vport_update_params.vport_active_flg = 0;
+ vport_update_params.update_rss_flg = 0;
+
+ rc = edev->ops->vport_update(cdev, &vport_update_params);
+ if (rc) {
+ DP_ERR(edev, "Failed to update vport\n");
+ return rc;
+ }
+
+ /* Flush Tx queues. If needed, request drain from MCP */
+ for_each_rss(i) {
+ struct qede_fastpath *fp = &edev->fp_array[i];
+
+ for (tc = 0; tc < edev->num_tc; tc++) {
+ struct qede_tx_queue *txq = &fp->txqs[tc];
+
+ rc = qede_drain_txq(edev, txq, true);
+ if (rc)
+ return rc;
+ }
+ }
+
+ /* Stop all Queues in reverse order*/
+ for (i = QEDE_RSS_CNT(edev) - 1; i >= 0; i--) {
+ struct qed_stop_rxq_params rx_params;
+
+ /* Stop the Tx Queue(s)*/
+ for (tc = 0; tc < edev->num_tc; tc++) {
+ struct qed_stop_txq_params tx_params;
+
+ tx_params.rss_id = i;
+ tx_params.tx_queue_id = tc * QEDE_RSS_CNT(edev) + i;
+ rc = edev->ops->q_tx_stop(cdev, &tx_params);
+ if (rc) {
+ DP_ERR(edev, "Failed to stop TXQ #%d\n",
+ tx_params.tx_queue_id);
+ return rc;
+ }
+ }
+
+ /* Stop the Rx Queue*/
+ memset(&rx_params, 0, sizeof(rx_params));
+ rx_params.rss_id = i;
+ rx_params.rx_queue_id = i;
+
+ rc = edev->ops->q_rx_stop(cdev, &rx_params);
+ if (rc) {
+ DP_ERR(edev, "Failed to stop RXQ #%d\n", i);
+ return rc;
+ }
+ }
+
+ /* Stop the vport */
+ rc = edev->ops->vport_stop(cdev, 0);
+ if (rc)
+ DP_ERR(edev, "Failed to stop VPORT\n");
+
+ return rc;
+}
+
+static int qede_start_queues(struct qede_dev *edev)
+{
+ int rc, tc, i;
+ int vport_id = 0, drop_ttl0_flg = 1, vlan_removal_en = 1;
+ struct qed_dev *cdev = edev->cdev;
+ struct qed_update_vport_rss_params *rss_params = &edev->rss_params;
+ struct qed_update_vport_params vport_update_params;
+
+ if (!edev->num_rss) {
+ DP_ERR(edev,
+ "Cannot update V-VPORT as active as there are no Rx queues\n");
+ return -EINVAL;
+ }
+
+ rc = edev->ops->vport_start(cdev, vport_id,
+ edev->ndev->mtu,
+ drop_ttl0_flg,
+ vlan_removal_en);
+
+ if (rc) {
+ DP_ERR(edev, "Start V-PORT failed %d\n", rc);
+ return rc;
+ }
+
+ DP_VERBOSE(edev, NETIF_MSG_IFUP,
+ "Start vport ramrod passed, vport_id = %d, MTU = %d, vlan_removal_en = %d\n",
+ vport_id, edev->ndev->mtu + 0xe, vlan_removal_en);
+
+ for_each_rss(i) {
+ struct qede_fastpath *fp = &edev->fp_array[i];
+ dma_addr_t phys_table = fp->rxq->rx_comp_ring.pbl.p_phys_table;
+
+ rc = edev->ops->q_rx_start(cdev, i, i, 0,
+ fp->sb_info->igu_sb_id,
+ RX_PI,
+ fp->rxq->rx_buf_size,
+ fp->rxq->rx_bd_ring.p_phys_addr,
+ phys_table,
+ fp->rxq->rx_comp_ring.page_cnt,
+ &fp->rxq->hw_rxq_prod_addr);
+ if (rc) {
+ DP_ERR(edev, "Start RXQ #%d failed %d\n", i, rc);
+ return rc;
+ }
+
+ fp->rxq->hw_cons_ptr = &fp->sb_info->sb_virt->pi_array[RX_PI];
+
+ qede_update_rx_prod(edev, fp->rxq);
+
+ for (tc = 0; tc < edev->num_tc; tc++) {
+ struct qede_tx_queue *txq = &fp->txqs[tc];
+ int txq_index = tc * QEDE_RSS_CNT(edev) + i;
+
+ rc = edev->ops->q_tx_start(cdev, i, txq_index,
+ 0, fp->sb_info->igu_sb_id,
+ TX_PI(tc),
+ txq->tx_pbl.pbl.p_phys_table,
+ txq->tx_pbl.page_cnt,
+ &txq->doorbell_addr);
+ if (rc) {
+ DP_ERR(edev, "Start TXQ #%d failed %d\n",
+ txq_index, rc);
+ return rc;
+ }
+
+ txq->hw_cons_ptr =
+ &fp->sb_info->sb_virt->pi_array[TX_PI(tc)];
+ SET_FIELD(txq->tx_db.data.params,
+ ETH_DB_DATA_DEST, DB_DEST_XCM);
+ SET_FIELD(txq->tx_db.data.params, ETH_DB_DATA_AGG_CMD,
+ DB_AGG_CMD_SET);
+ SET_FIELD(txq->tx_db.data.params,
+ ETH_DB_DATA_AGG_VAL_SEL,
+ DQ_XCM_ETH_TX_BD_PROD_CMD);
+
+ txq->tx_db.data.agg_flags = DQ_XCM_ETH_DQ_CF_CMD;
+ }
+ }
+
+ /* Prepare and send the vport enable */
+ memset(&vport_update_params, 0, sizeof(vport_update_params));
+ vport_update_params.vport_id = vport_id;
+ vport_update_params.update_vport_active_flg = 1;
+ vport_update_params.vport_active_flg = 1;
+
+ /* Fill struct with RSS params */
+ if (QEDE_RSS_CNT(edev) > 1) {
+ vport_update_params.update_rss_flg = 1;
+ for (i = 0; i < 128; i++)
+ rss_params->rss_ind_table[i] =
+ ethtool_rxfh_indir_default(i, QEDE_RSS_CNT(edev));
+ netdev_rss_key_fill(rss_params->rss_key,
+ sizeof(rss_params->rss_key));
+ } else {
+ memset(rss_params, 0, sizeof(*rss_params));
+ }
+ memcpy(&vport_update_params.rss_params, rss_params,
+ sizeof(*rss_params));
+
+ rc = edev->ops->vport_update(cdev, &vport_update_params);
+ if (rc) {
+ DP_ERR(edev, "Update V-PORT failed %d\n", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+enum qede_unload_mode {
+ QEDE_UNLOAD_NORMAL,
+};
+
+static void qede_unload(struct qede_dev *edev, enum qede_unload_mode mode)
+{
+ int rc;
+
+ DP_INFO(edev, "Starting qede unload\n");
+
+ /* Close OS Tx */
+ netif_tx_disable(edev->ndev);
+ netif_carrier_off(edev->ndev);
+
+ rc = qede_stop_queues(edev);
+ if (rc) {
+ qede_sync_free_irqs(edev);
+ goto out;
+ }
+
+ DP_INFO(edev, "Stopped Queues\n");
+
+ edev->ops->fastpath_stop(edev->cdev);
+
+ /* Release the interrupts */
+ qede_sync_free_irqs(edev);
+ edev->ops->common->set_fp_int(edev->cdev, 0);
+
+ qede_napi_disable_remove(edev);
+
+ qede_free_mem_load(edev);
+ qede_free_fp_array(edev);
+
+out:
+ mutex_unlock(&edev->qede_lock);
+ DP_INFO(edev, "Ending qede unload\n");
+}
+
+enum qede_load_mode {
+ QEDE_LOAD_NORMAL,
+};
+
+static int qede_load(struct qede_dev *edev, enum qede_load_mode mode)
+{
+ int rc;
+
+ DP_INFO(edev, "Starting qede load\n");
+
+ rc = qede_set_num_queues(edev);
+ if (rc)
+ goto err0;
+
+ rc = qede_alloc_fp_array(edev);
+ if (rc)
+ goto err0;
+
+ qede_init_fp(edev);
+
+ rc = qede_alloc_mem_load(edev);
+ if (rc)
+ goto err1;
+ DP_INFO(edev, "Allocated %d RSS queues on %d TC/s\n",
+ QEDE_RSS_CNT(edev), edev->num_tc);
+
+ rc = qede_set_real_num_queues(edev);
+ if (rc)
+ goto err2;
+
+ qede_napi_add_enable(edev);
+ DP_INFO(edev, "Napi added and enabled\n");
+
+ rc = qede_setup_irqs(edev);
+ if (rc)
+ goto err3;
+ DP_INFO(edev, "Setup IRQs succeeded\n");
+
+ rc = qede_start_queues(edev);
+ if (rc)
+ goto err4;
+ DP_INFO(edev, "Start VPORT, RXQ and TXQ succeeded\n");
+
+ /* Add primary mac and set Rx filters */
+ ether_addr_copy(edev->primary_mac, edev->ndev->dev_addr);
+
+ DP_INFO(edev, "Ending successfully qede load\n");
+
+ return 0;
+
+err4:
+ qede_sync_free_irqs(edev);
+ memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
+err3:
+ qede_napi_disable_remove(edev);
+err2:
+ qede_free_mem_load(edev);
+err1:
+ edev->ops->common->set_fp_int(edev->cdev, 0);
+ qede_free_fp_array(edev);
+ edev->num_rss = 0;
+err0:
+ return rc;
+}
+
+/* called with rtnl_lock */
+static int qede_open(struct net_device *ndev)
+{
+ int rc;
+ struct qede_dev *edev = netdev_priv(ndev);
+
+ netif_carrier_off(ndev);
+
+ edev->ops->common->set_power_state(edev->cdev, PCI_D0);
+
+ rc = qede_load(edev, QEDE_LOAD_NORMAL);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+static int qede_close(struct net_device *ndev)
+{
+ struct qede_dev *edev = netdev_priv(ndev);
+
+ qede_unload(edev, QEDE_UNLOAD_NORMAL);
+
+ return 0;
+}
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists