| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1442912534-10821-23-git-send-email-m.grzeschik@pengutronix.de>
Date: Tue, 22 Sep 2015 11:02:03 +0200
From: Michael Grzeschik <m.grzeschik@...gutronix.de>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, joe@...ches.com, kernel@...gutronix.de
Subject: [PATCH 22/33] arcnet: com90io: Use arcnet_<I/O> routines
From: Joe Perches <joe@...ches.com>
Simplify and make consistent the current uses of inb/outb
by using the newly introduced arcnet_<I/O> equivalents.
o Add new #defines for register offsets
o Remove old #defines that included the ioaddr
o Remove obfuscating macros by expanding them in-place where appropriate
Signed-off-by: Joe Perches <joe@...ches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@...gutronix.de>
---
drivers/net/arcnet/com90io.c | 101 ++++++++++++++++++++-----------------------
1 file changed, 48 insertions(+), 53 deletions(-)
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index ce15d191..7e084f1 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -59,23 +59,14 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum,
#define ARCNET_TOTAL_SIZE 16
/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr + 0) /* writable */
-#define _STATUS (ioaddr + 0) /* readable */
-#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
-#define _RESET (ioaddr + 8) /* software reset (on read) */
-#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
-#define _ADDR_LO (ioaddr + 14)
-#define _CONFIG (ioaddr + 2) /* Configuration register */
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS() inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd), _COMMAND)
-#define AINTMASK(msk) outb((msk), _INTMASK)
-#define SETCONF() outb((lp->config), _CONFIG)
+#define COM9026_REG_W_INTMASK 0 /* writable */
+#define COM9026_REG_R_STATUS 0 /* readable */
+#define COM9026_REG_W_COMMAND 1 /* writable, returns random vals on read (?) */
+#define COM9026_REG_RW_CONFIG 2 /* Configuration register */
+#define COM9026_REG_R_RESET 8 /* software reset (on read) */
+#define COM9026_REG_RW_MEMDATA 12 /* Data port for IO-mapped memory */
+#define COM9026_REG_W_ADDR_LO 14 /* Control registers for said */
+#define COM9026_REG_W_ADDR_HI 15
/****************************************************************************
* *
@@ -90,10 +81,10 @@ static u_char get_buffer_byte(struct net_device *dev, unsigned offset)
{
int ioaddr = dev->base_addr;
- outb(offset >> 8, _ADDR_HI);
- outb(offset & 0xff, _ADDR_LO);
+ arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+ arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
- return inb(_MEMDATA);
+ return arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
}
#ifdef ONE_AT_A_TIME_TX
@@ -102,10 +93,10 @@ static void put_buffer_byte(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
- outb(offset >> 8, _ADDR_HI);
- outb(offset & 0xff, _ADDR_LO);
+ arcnet_outb(offset >> 8, ioaddr, COM9026_REG_W_ADDR_HI);
+ arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
- outb(datum, _MEMDATA);
+ arcnet_outb(datum, ioaddr, COM9026_REG_RW_MEMDATA);
}
#endif
@@ -115,14 +106,14 @@ static void get_whole_buffer(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
- outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
- outb(offset & 0xff, _ADDR_LO);
+ arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+ arcnet_outb(offset & 0xff, ioaddr, COM9026_REG_W_ADDR_LO);
while (length--)
#ifdef ONE_AT_A_TIME_RX
*(dest++) = get_buffer_byte(dev, offset++);
#else
- *(dest++) = inb(_MEMDATA);
+ *(dest++) = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
#endif
}
@@ -131,14 +122,14 @@ static void put_whole_buffer(struct net_device *dev, unsigned offset,
{
int ioaddr = dev->base_addr;
- outb((offset >> 8) | AUTOINCflag, _ADDR_HI);
- outb(offset & 0xff, _ADDR_LO);
+ arcnet_outb((offset >> 8) | AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+ arcnet_outb(offset & 0xff, ioaddr,COM9026_REG_W_ADDR_LO);
while (length--)
#ifdef ONE_AT_A_TIME_TX
put_buffer_byte(dev, offset++, *(dest++));
#else
- outb(*(dest++), _MEMDATA);
+ arcnet_outb(*(dest++), ioaddr, COM9026_REG_RW_MEMDATA);
#endif
}
@@ -164,15 +155,15 @@ static int __init com90io_probe(struct net_device *dev)
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
return -ENXIO;
}
- if (ASTATUS() == 0xFF) {
+ if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
arc_printk(D_INIT_REASONS, dev, "IO address %x empty\n",
ioaddr);
goto err_out;
}
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
- status = ASTATUS();
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if ((status & 0x9D) != (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
arc_printk(D_INIT_REASONS, dev, "Status invalid (%Xh)\n",
@@ -181,26 +172,28 @@ static int __init com90io_probe(struct net_device *dev)
}
arc_printk(D_INIT_REASONS, dev, "Status after reset: %X\n", status);
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+ arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+ ioaddr, COM9026_REG_W_COMMAND);
arc_printk(D_INIT_REASONS, dev, "Status after reset acknowledged: %X\n",
status);
- status = ASTATUS();
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if (status & RESETflag) {
arc_printk(D_INIT_REASONS, dev, "Eternal reset (status=%Xh)\n",
status);
goto err_out;
}
- outb((0x16 | IOMAPflag) & ~ENABLE16flag, _CONFIG);
+ arcnet_outb((0x16 | IOMAPflag) & ~ENABLE16flag,
+ ioaddr, COM9026_REG_RW_CONFIG);
/* Read first loc'n of memory */
- outb(AUTOINCflag, _ADDR_HI);
- outb(0, _ADDR_LO);
+ arcnet_outb(AUTOINCflag, ioaddr, COM9026_REG_W_ADDR_HI);
+ arcnet_outb(0, ioaddr, COM9026_REG_W_ADDR_LO);
- status = inb(_MEMDATA);
+ status = arcnet_inb(ioaddr, COM9026_REG_RW_MEMDATA);
if (status != 0xd1) {
arc_printk(D_INIT_REASONS, dev, "Signature byte not found (%Xh instead).\n",
status);
@@ -213,9 +206,9 @@ static int __init com90io_probe(struct net_device *dev)
*/
airqmask = probe_irq_on();
- outb(NORXflag, _INTMASK);
+ arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
udelay(1);
- outb(0, _INTMASK);
+ arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
dev->irq = probe_irq_off(airqmask);
if ((int)dev->irq <= 0) {
@@ -264,7 +257,7 @@ static int __init com90io_found(struct net_device *dev)
lp->hw.copy_from_card = com90io_copy_from_card;
lp->config = (0x16 | IOMAPflag) & ~ENABLE16flag;
- SETCONF();
+ arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
/* get and check the station ID from offset 1 in shmem */
@@ -272,7 +265,8 @@ static int __init com90io_found(struct net_device *dev)
err = register_netdev(dev);
if (err) {
- outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+ arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+ ioaddr, COM9026_REG_RW_CONFIG);
free_irq(dev->irq, dev);
release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
return err;
@@ -297,19 +291,20 @@ static int com90io_reset(struct net_device *dev, int really_reset)
short ioaddr = dev->base_addr;
arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
- dev->name, ASTATUS());
+ dev->name, arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
if (really_reset) {
/* reset the card */
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
}
/* Set the thing to IO-mapped, 8-bit mode */
lp->config = (0x1C | IOMAPflag) & ~ENABLE16flag;
- SETCONF();
+ arcnet_outb(lp->config, ioaddr, COM9026_REG_RW_CONFIG);
- ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */
- ACOMMAND(CFLAGScmd | CONFIGclear);
+ arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+ /* clear flags & end reset */
+ arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
/* verify that the ARCnet signature byte is present */
if (get_buffer_byte(dev, 0) != TESTvalue) {
@@ -317,8 +312,7 @@ static int com90io_reset(struct net_device *dev, int really_reset)
return 1;
}
/* enable extended (512-byte) packets */
- ACOMMAND(CONFIGcmd | EXTconf);
-
+ arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
/* done! return success. */
return 0;
}
@@ -327,21 +321,21 @@ static void com90io_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
- ACOMMAND(cmd);
+ arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
}
static int com90io_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
- return ASTATUS();
+ return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
}
static void com90io_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
- AINTMASK(mask);
+ arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
}
static void com90io_copy_to_card(struct net_device *dev, int bufnum,
@@ -427,7 +421,8 @@ static void __exit com90io_exit(void)
/* In case the old driver is loaded later,
* set the thing back to MMAP mode
*/
- outb((inb(_CONFIG) & ~IOMAPflag), _CONFIG);
+ arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) & ~IOMAPflag,
+ ioaddr, COM9026_REG_RW_CONFIG);
free_irq(dev->irq, dev);
release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists