| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1442912534-10821-3-git-send-email-m.grzeschik@pengutronix.de>
Date: Tue, 22 Sep 2015 11:01:43 +0200
From: Michael Grzeschik <m.grzeschik@...gutronix.de>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, joe@...ches.com, kernel@...gutronix.de
Subject: [PATCH 02/33] arcnet: Use normal kernel spacing style
From: Joe Perches <joe@...ches.com>
Standardized spacing is easier to read.
git diff -w shows no differences.
objdiff shows no differences.
Signed-off-by: Joe Perches <joe@...ches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@...gutronix.de>
---
drivers/net/arcnet/arc-rawmode.c | 10 +-
drivers/net/arcnet/arc-rimi.c | 30 ++--
drivers/net/arcnet/arcnet.c | 170 ++++++++++-----------
drivers/net/arcnet/capmode.c | 36 ++---
drivers/net/arcnet/com20020-isa.c | 2 +-
drivers/net/arcnet/com20020-pci.c | 2 +-
drivers/net/arcnet/com20020.c | 38 ++---
drivers/net/arcnet/com20020_cs.c | 306 +++++++++++++++++++-------------------
drivers/net/arcnet/com90io.c | 24 +--
drivers/net/arcnet/com90xx.c | 32 ++--
drivers/net/arcnet/rfc1051.c | 12 +-
drivers/net/arcnet/rfc1201.c | 36 ++---
include/linux/arcdevice.h | 90 +++++------
13 files changed, 394 insertions(+), 394 deletions(-)
diff --git a/drivers/net/arcnet/arc-rawmode.c b/drivers/net/arcnet/arc-rawmode.c
index 705e6ce..49f5819 100644
--- a/drivers/net/arcnet/arc-rawmode.c
+++ b/drivers/net/arcnet/arc-rawmode.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@@ -109,7 +109,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
skb_reset_mac_header(skb);
skb_pull(skb, ARC_HDR_SIZE);
@@ -136,7 +136,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE;
- struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+ struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
/*
* Set the source hardware address.
@@ -150,7 +150,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
+ /*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode.
*/
@@ -192,7 +192,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
hard->offset[0] = ofs = 256 - length;
BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
- length,ofs);
+ length, ofs);
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c
index b8b4c7b..4644d46 100644
--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@....cz>.
* Derived from skeleton.c by Donald Becker.
@@ -56,27 +56,27 @@ static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offse
/* Handy defines for ARCnet specific stuff */
/* Amount of I/O memory used by the card */
-#define BUFFER_SIZE (512)
-#define MIRROR_SIZE (BUFFER_SIZE*4)
+#define BUFFER_SIZE (512)
+#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0) /* writable */
-#define _STATUS (ioaddr+0) /* readable */
-#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
-#define _RESET (ioaddr+8) /* software reset (on read) */
-#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr+15) /* Control registers for said */
-#define _ADDR_LO (ioaddr+14)
-#define _CONFIG (ioaddr+2) /* Configuration register */
+#define _INTMASK (ioaddr + 0) /* writable */
+#define _STATUS (ioaddr + 0) /* readable */
+#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
+#define _RESET (ioaddr + 8) /* software reset (on read) */
+#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
+#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
+#define _ADDR_LO (ioaddr + 14)
+#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() readb(_STATUS)
-#define ACOMMAND(cmd) writeb((cmd),_COMMAND)
-#define AINTMASK(msk) writeb((msk),_INTMASK)
-#define SETCONF() writeb(lp->config,_CONFIG)
+#define ACOMMAND(cmd) writeb((cmd), _COMMAND)
+#define AINTMASK(msk) writeb((msk), _INTMASK)
+#define SETCONF() writeb(lp->config, _CONFIG)
/*
@@ -90,7 +90,7 @@ static int __init arcrimi_probe(struct net_device *dev)
BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n");
BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n",
- dev->dev_addr[0], dev->mem_start, dev->irq);
+ dev->dev_addr[0], dev->mem_start, dev->irq);
if (dev->mem_start <= 0 || dev->irq <= 0) {
BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you "
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 10f71c73..2a594d1 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - device-independent routines
- *
+ *
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@....cz>.
@@ -20,12 +20,12 @@
* modified by SRC, incorporated herein by reference.
*
* **********************
- *
+ *
* The change log is now in a file called ChangeLog in this directory.
*
* Sources:
* - Crynwr arcnet.com/arcether.com packet drivers.
- * - arcnet.c v0.00 dated 1/1/94 and apparently by
+ * - arcnet.c v0.00 dated 1/1/94 and apparently by
* Donald Becker - it didn't work :)
* - skeleton.c v0.05 dated 11/16/93 by Donald Becker
* (from Linux Kernel 1.1.45)
@@ -69,8 +69,8 @@ static void arcnet_rx(struct net_device *dev, int bufnum);
* arc_proto_default instead. It also must not be NULL; if you would like
* to set it to NULL, set it to &arc_proto_null instead.
*/
- struct ArcProto *arc_proto_map[256], *arc_proto_default,
- *arc_bcast_proto, *arc_raw_proto;
+struct ArcProto *arc_proto_map[256], *arc_proto_default,
+ *arc_bcast_proto, *arc_raw_proto;
static struct ArcProto arc_proto_null =
{
@@ -136,8 +136,8 @@ static int __init arcnet_init(void)
BUGLVL(D_DURING)
printk("arcnet: struct sizes: %Zd %Zd %Zd %Zd %Zd\n",
- sizeof(struct arc_hardware), sizeof(struct arc_rfc1201),
- sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap),
+ sizeof(struct arc_hardware), sizeof(struct arc_rfc1201),
+ sizeof(struct arc_rfc1051), sizeof(struct arc_eth_encap),
sizeof(struct archdr));
return 0;
@@ -184,11 +184,11 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
/* hw.copy_from_card expects IRQ context so take the IRQ lock
to keep it single threaded */
- if(take_arcnet_lock)
+ if (take_arcnet_lock)
spin_lock_irqsave(&lp->lock, flags);
lp->hw.copy_from_card(dev, bufnum, 0, buf, 512);
- if(take_arcnet_lock)
+ if (take_arcnet_lock)
spin_unlock_irqrestore(&lp->lock, flags);
/* if the offset[0] byte is nonzero, this is a 256-byte packet */
@@ -202,7 +202,7 @@ static void arcnet_dump_packet(struct net_device *dev, int bufnum,
#else
-#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
+#define arcnet_dump_packet(dev, bufnum, desc, take_arcnet_lock) do { } while (0)
#endif
@@ -233,7 +233,7 @@ void arcnet_unregister_proto(struct ArcProto *proto)
/*
* Add a buffer to the queue. Only the interrupt handler is allowed to do
* this, unless interrupts are disabled.
- *
+ *
* Note: we don't check for a full queue, since there aren't enough buffers
* to more than fill it.
*/
@@ -248,7 +248,7 @@ static void release_arcbuf(struct net_device *dev, int bufnum)
BUGLVL(D_DURING) {
BUGMSG(D_DURING, "release_arcbuf: freed #%d; buffer queue is now: ",
bufnum);
- for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
+ for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
BUGMSG2(D_DURING, "\n");
}
@@ -284,7 +284,7 @@ static int get_arcbuf(struct net_device *dev)
BUGLVL(D_DURING) {
BUGMSG(D_DURING, "get_arcbuf: got #%d; buffer queue is now: ", buf);
- for (i = lp->next_buf; i != lp->first_free_buf; i = (i+1) % 5)
+ for (i = lp->next_buf; i != lp->first_free_buf; i = (i + 1) % 5)
BUGMSG2(D_DURING, "#%d ", lp->buf_queue[i]);
BUGMSG2(D_DURING, "\n");
}
@@ -346,7 +346,7 @@ struct net_device *alloc_arcdev(const char *name)
dev = alloc_netdev(sizeof(struct arcnet_local),
name && *name ? name : "arc%d", NET_NAME_UNKNOWN,
arcdev_setup);
- if(dev) {
+ if (dev) {
struct arcnet_local *lp = netdev_priv(dev);
spin_lock_init(&lp->lock);
}
@@ -367,7 +367,7 @@ int arcnet_open(struct net_device *dev)
struct arcnet_local *lp = netdev_priv(dev);
int count, newmtu, error;
- BUGMSG(D_INIT,"opened.");
+ BUGMSG(D_INIT, "opened.");
if (!try_module_get(lp->hw.owner))
return -ENODEV;
@@ -431,24 +431,24 @@ int arcnet_open(struct net_device *dev)
BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse "
"DOS networking programs!\n");
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (ASTATUS() & RESETflag) {
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
ACOMMAND(CFLAGScmd | RESETclear);
}
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* make sure we're ready to receive IRQ's. */
AINTMASK(0);
udelay(1); /* give it time to set the mask before
* we reset it again. (may not even be
* necessary)
*/
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
lp->intmask = NORXflag | RECONflag;
AINTMASK(lp->intmask);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
netif_start_queue(dev);
@@ -489,29 +489,29 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
struct ArcProto *proto;
BUGMSG(D_DURING,
- "create header from %d to %d; protocol %d (%Xh); size %u.\n",
- saddr ? *(uint8_t *) saddr : -1,
- daddr ? *(uint8_t *) daddr : -1,
+ "create header from %d to %d; protocol %d (%Xh); size %u.\n",
+ saddr ? *(uint8_t *)saddr : -1,
+ daddr ? *(uint8_t *)daddr : -1,
type, type, len);
- if (skb->len!=0 && len != skb->len)
+ if (skb->len != 0 && len != skb->len)
BUGMSG(D_NORMAL, "arcnet_header: Yikes! skb->len(%d) != len(%d)!\n",
skb->len, len);
- /* Type is host order - ? */
- if(type == ETH_P_ARCNET) {
- proto = arc_raw_proto;
- BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n",proto->suffix);
- _daddr = daddr ? *(uint8_t *) daddr : 0;
- }
+ /* Type is host order - ? */
+ if (type == ETH_P_ARCNET) {
+ proto = arc_raw_proto;
+ BUGMSG(D_DEBUG, "arc_raw_proto used. proto='%c'\n", proto->suffix);
+ _daddr = daddr ? *(uint8_t *)daddr : 0;
+ }
else if (!daddr) {
/*
* if the dest addr isn't provided, we can't choose an encapsulation!
* Store the packet type (eg. ETH_P_IP) for now, and we'll push on a
* real header when we do rebuild_header.
*/
- *(uint16_t *) skb_push(skb, 2) = type;
+ *(uint16_t *)skb_push(skb, 2) = type;
/*
* XXX: Why not use skb->mac_len?
*/
@@ -522,7 +522,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
}
else {
/* otherwise, we can just add the header as usual. */
- _daddr = *(uint8_t *) daddr;
+ _daddr = *(uint8_t *)daddr;
proto_num = lp->default_proto[_daddr];
proto = arc_proto_map[proto_num];
BUGMSG(D_DURING, "building header for %02Xh using protocol '%c'\n",
@@ -538,7 +538,7 @@ static int arcnet_header(struct sk_buff *skb, struct net_device *dev,
/* Called by the kernel in order to transmit a packet. */
netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
- struct net_device *dev)
+ struct net_device *dev)
{
struct arcnet_local *lp = netdev_priv(dev);
struct archdr *pkt;
@@ -550,14 +550,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
BUGMSG(D_DURING,
"transmit requested (status=%Xh, txbufs=%d/%d, len=%d, protocol %x)\n",
- ASTATUS(), lp->cur_tx, lp->next_tx, skb->len,skb->protocol);
+ ASTATUS(), lp->cur_tx, lp->next_tx, skb->len, skb->protocol);
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
proto = arc_proto_map[soft->proto];
BUGMSG(D_SKB_SIZE, "skb: transmitting %d bytes to %02X\n",
- skb->len, pkt->hard.dest);
+ skb->len, pkt->hard.dest);
BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "tx");
/* fits in one packet? */
@@ -572,7 +572,7 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
spin_lock_irqsave(&lp->lock, flags);
AINTMASK(0);
- if(lp->next_tx == -1)
+ if (lp->next_tx == -1)
txbuf = get_arcbuf(dev);
else {
txbuf = -1;
@@ -594,9 +594,9 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
if (proto->continue_tx &&
proto->continue_tx(dev, txbuf)) {
- BUGMSG(D_NORMAL,
- "bug! continue_tx finished the first time! "
- "(proto='%c')\n", proto->suffix);
+ BUGMSG(D_NORMAL,
+ "bug! continue_tx finished the first time! "
+ "(proto='%c')\n", proto->suffix);
}
}
retval = NETDEV_TX_OK;
@@ -606,14 +606,14 @@ netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
freeskb = 0;
}
- BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
+ BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS());
/* make sure we didn't ignore a TX IRQ while we were in here */
AINTMASK(0);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
- lp->intmask |= TXFREEflag|EXCNAKflag;
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
+ lp->intmask |= TXFREEflag | EXCNAKflag;
AINTMASK(lp->intmask);
- BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
+ BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n", __FILE__, __LINE__, __func__, ASTATUS());
spin_unlock_irqrestore(&lp->lock, flags);
if (freeskb) {
@@ -649,7 +649,7 @@ static int go_tx(struct net_device *dev)
lp->lasttrans_dest = lp->lastload_dest;
lp->lastload_dest = 0;
lp->excnak_pending = 0;
- lp->intmask |= TXFREEflag|EXCNAKflag;
+ lp->intmask |= TXFREEflag | EXCNAKflag;
return 1;
}
@@ -676,12 +676,12 @@ void arcnet_timeout(struct net_device *dev)
/* make sure we didn't miss a TX or a EXC NAK IRQ */
AINTMASK(0);
- lp->intmask |= TXFREEflag|EXCNAKflag;
+ lp->intmask |= TXFREEflag | EXCNAKflag;
AINTMASK(lp->intmask);
-
+
spin_unlock_irqrestore(&lp->lock, flags);
- if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
+ if (time_after(jiffies, lp->last_timeout + 10 * HZ)) {
BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
msg, status, lp->intmask, lp->lasttrans_dest);
lp->last_timeout = jiffies;
@@ -710,7 +710,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
lp = netdev_priv(dev);
BUG_ON(!lp);
-
+
spin_lock(&lp->lock);
/*
@@ -731,16 +731,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
boguscount = 5;
do {
status = ASTATUS();
- diagstatus = (status >> 8) & 0xFF;
+ diagstatus = (status >> 8) & 0xFF;
BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n",
- __FILE__,__LINE__,__func__,status);
+ __FILE__, __LINE__, __func__, status);
didsomething = 0;
/*
* RESET flag was enabled - card is resetting and if RX is
* disabled, it's NOT because we just got a packet.
- *
+ *
* The card is in an undefined state. Clear it out and start over.
*/
if (status & RESETflag) {
@@ -751,14 +751,14 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
/* get out of the interrupt handler! */
break;
}
- /*
+ /*
* RX is inhibited - we must have received something. Prepare to
* receive into the next buffer.
- *
+ *
* We don't actually copy the received packet from the card until
* after the transmit handler runs (and possibly launches the next
* tx); this should improve latency slightly if we get both types
- * of interrupts at once.
+ * of interrupts at once.
*/
recbuf = -1;
if (status & lp->intmask & NORXflag) {
@@ -775,27 +775,27 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
didsomething++;
}
- if((diagstatus & EXCNAKflag)) {
+ if ((diagstatus & EXCNAKflag)) {
BUGMSG(D_DURING, "EXCNAK IRQ (diagstat=%Xh)\n",
diagstatus);
- ACOMMAND(NOTXcmd); /* disable transmit */
- lp->excnak_pending = 1;
+ ACOMMAND(NOTXcmd); /* disable transmit */
+ lp->excnak_pending = 1;
- ACOMMAND(EXCNAKclear);
+ ACOMMAND(EXCNAKclear);
lp->intmask &= ~(EXCNAKflag);
- didsomething++;
- }
+ didsomething++;
+ }
/* a transmit finished, and we're interested in it. */
if ((status & lp->intmask & TXFREEflag) || lp->timed_out) {
- lp->intmask &= ~(TXFREEflag|EXCNAKflag);
+ lp->intmask &= ~(TXFREEflag | EXCNAKflag);
BUGMSG(D_DURING, "TX IRQ (stat=%Xh)\n", status);
if (lp->cur_tx != -1 && !lp->timed_out) {
- if(!(status & TXACKflag)) {
+ if (!(status & TXACKflag)) {
if (lp->lasttrans_dest != 0) {
BUGMSG(D_EXTRA,
"transmit was not acknowledged! "
@@ -813,16 +813,16 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
if (lp->outgoing.proto &&
lp->outgoing.proto->ack_tx) {
- int ackstatus;
- if(status & TXACKflag)
- ackstatus=2;
- else if(lp->excnak_pending)
- ackstatus=1;
- else
- ackstatus=0;
-
- lp->outgoing.proto
- ->ack_tx(dev, ackstatus);
+ int ackstatus;
+ if (status & TXACKflag)
+ ackstatus = 2;
+ else if (lp->excnak_pending)
+ ackstatus = 1;
+ else
+ ackstatus = 0;
+
+ lp->outgoing.proto
+ ->ack_tx(dev, ackstatus);
}
}
if (lp->cur_tx != -1)
@@ -842,11 +842,11 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
if (lp->outgoing.proto->continue_tx(dev, txbuf)) {
/* that was the last segment */
dev->stats.tx_bytes += lp->outgoing.skb->len;
- if(!lp->outgoing.proto->ack_tx)
- {
- dev_kfree_skb_irq(lp->outgoing.skb);
- lp->outgoing.proto = NULL;
- }
+ if (!lp->outgoing.proto->ack_tx)
+ {
+ dev_kfree_skb_irq(lp->outgoing.skb);
+ lp->outgoing.proto = NULL;
+ }
}
lp->next_tx = txbuf;
}
@@ -871,8 +871,8 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_RECON, "Network reconfiguration detected (status=%Xh)\n",
status);
/* MYRECON bit is at bit 7 of diagstatus */
- if(diagstatus & 0x80)
- BUGMSG(D_RECON,"Put out that recon myself\n");
+ if (diagstatus & 0x80)
+ BUGMSG(D_RECON, "Put out that recon myself\n");
/* is the RECON info empty or old? */
if (!lp->first_recon || !lp->last_recon ||
@@ -889,7 +889,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_DURING, "recon: counter=%d, time=%lds, net=%d\n",
lp->num_recons,
- (lp->last_recon - lp->first_recon) / HZ,
+ (lp->last_recon - lp->first_recon) / HZ,
lp->network_down);
/* if network is marked up;
@@ -911,7 +911,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
}
}
} else if (lp->network_down &&
- time_after(jiffies, lp->last_recon + HZ * 10)) {
+ time_after(jiffies, lp->last_recon + HZ * 10)) {
if (lp->network_down)
BUGMSG(D_NORMAL, "cabling restored?\n");
lp->first_recon = lp->last_recon = 0;
@@ -920,7 +920,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
BUGMSG(D_DURING, "not recon: clearing counters anyway.\n");
}
- if(didsomething) {
+ if (didsomething) {
retval |= IRQ_HANDLED;
}
}
@@ -934,7 +934,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
AINTMASK(0);
udelay(1);
AINTMASK(lp->intmask);
-
+
spin_unlock(&lp->lock);
return retval;
}
@@ -1007,7 +1007,7 @@ static void null_rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
{
BUGMSG(D_PROTO,
- "rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
+ "rx: don't know how to deal with proto %02Xh from host %02Xh.\n",
pkthdr->soft.rfc1201.proto, pkthdr->hard.source);
}
diff --git a/drivers/net/arcnet/capmode.c b/drivers/net/arcnet/capmode.c
index 42fce91..95a6cf0 100644
--- a/drivers/net/arcnet/capmode.c
+++ b/drivers/net/arcnet/capmode.c
@@ -71,12 +71,12 @@ static void rx(struct net_device *dev, int bufnum,
/* use these variables to be sure we count in bytes, not in
sizeof(struct archdr) */
- pktbuf=(char*)pkt;
- pkthdrbuf=(char*)pkthdr;
- memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto));
- memcpy(pktbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto)+sizeof(int),
- pkthdrbuf+ARC_HDR_SIZE+sizeof(pkt->soft.cap.proto),
- sizeof(struct archdr)-ARC_HDR_SIZE-sizeof(pkt->soft.cap.proto));
+ pktbuf = (char *)pkt;
+ pkthdrbuf = (char *)pkthdr;
+ memcpy(pktbuf, pkthdrbuf, ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto));
+ memcpy(pktbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto) + sizeof(int),
+ pkthdrbuf + ARC_HDR_SIZE + sizeof(pkt->soft.cap.proto),
+ sizeof(struct archdr) - ARC_HDR_SIZE - sizeof(pkt->soft.cap.proto));
if (length > sizeof(pkt->soft))
lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
@@ -101,10 +101,10 @@ static int build_header(struct sk_buff *skb,
uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE;
- struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+ struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
BUGMSG(D_PROTO, "Preparing header for cap packet %x.\n",
- *((int*)&pkt->soft.cap.cookie[0]));
+ *((int *)&pkt->soft.cap.cookie[0]));
/*
* Set the source hardware address.
*
@@ -148,7 +148,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
lp->next_tx, lp->cur_tx, bufnum);
BUGMSG(D_PROTO, "Sending for cap packet %x.\n",
- *((int*)&pkt->soft.cap.cookie[0]));
+ *((int *)&pkt->soft.cap.cookie[0]));
if (length > XMTU) {
/* should never happen! other people already check for this. */
@@ -166,7 +166,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
hard->offset[0] = ofs = 256 - length;
BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
- length,ofs);
+ length, ofs);
/* Copy the arcnet-header + the protocol byte down: */
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
@@ -175,8 +175,8 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
/* Skip the extra integer we have written into it as a cookie
but write the rest of the message: */
- lp->hw.copy_to_card(dev, bufnum, ofs+1,
- ((unsigned char*)&pkt->soft.cap.mes),length-1);
+ lp->hw.copy_to_card(dev, bufnum, ofs + 1,
+ ((unsigned char *)&pkt->soft.cap.mes), length - 1);
lp->lastload_dest = hard->dest;
@@ -188,21 +188,21 @@ static int ack_tx(struct net_device *dev, int acked)
struct arcnet_local *lp = netdev_priv(dev);
struct sk_buff *ackskb;
struct archdr *ackpkt;
- int length=sizeof(struct arc_cap);
+ int length = sizeof(struct arc_cap);
BUGMSG(D_DURING, "capmode: ack_tx: protocol: %x: result: %d\n",
- lp->outgoing.skb->protocol, acked);
+ lp->outgoing.skb->protocol, acked);
BUGLVL(D_SKB) arcnet_dump_skb(dev, lp->outgoing.skb, "ack_tx");
/* Now alloc a skb to send back up through the layers: */
- ackskb = alloc_skb(length + ARC_HDR_SIZE , GFP_ATOMIC);
+ ackskb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
if (ackskb == NULL) {
BUGMSG(D_NORMAL, "Memory squeeze, can't acknowledge.\n");
goto free_outskb;
}
- skb_put(ackskb, length + ARC_HDR_SIZE );
+ skb_put(ackskb, length + ARC_HDR_SIZE);
ackskb->dev = dev;
skb_reset_mac_header(ackskb);
@@ -212,10 +212,10 @@ static int ack_tx(struct net_device *dev, int acked)
skb_copy_from_linear_data(lp->outgoing.skb, ackpkt,
ARC_HDR_SIZE + sizeof(struct arc_cap));
ackpkt->soft.cap.proto = 0; /* using protocol 0 for acknowledge */
- ackpkt->soft.cap.mes.ack=acked;
+ ackpkt->soft.cap.mes.ack = acked;
BUGMSG(D_PROTO, "Ackknowledge for cap packet %x.\n",
- *((int*)&ackpkt->soft.cap.cookie[0]));
+ *((int *)&ackpkt->soft.cap.cookie[0]));
ackskb->protocol = cpu_to_be16(ETH_P_ARCNET);
diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c
index 45c61a2..d8746ca 100644
--- a/drivers/net/arcnet/com20020-isa.c
+++ b/drivers/net/arcnet/com20020-isa.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 chipset support
- *
+ *
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@....cz>.
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 96edc13..e0f489a 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -1,7 +1,7 @@
/*
* Linux ARCnet driver - COM20020 PCI support
* Contemporary Controls PCI20 and SOHARD SH-ARC PCI
- *
+ *
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Written 1999-2000 by Martin Mares <mj@....cz>.
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 1a84378..cd2a5ca 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 chipset support
- *
+ *
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@....cz>.
@@ -108,7 +108,7 @@ int com20020_check(struct net_device *dev)
{
SET_SUBADR(SUB_SETUP2);
outb(lp->setup2, _XREG);
-
+
/* must now write the magic "restart operation" command */
mdelay(1);
outb(0x18, _COMMAND);
@@ -117,7 +117,7 @@ int com20020_check(struct net_device *dev)
lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
SETCONF;
- outb(0x42, ioaddr + BUS_ALIGN*7);
+ outb(0x42, ioaddr + BUS_ALIGN * 7);
status = ASTATUS();
@@ -129,7 +129,7 @@ int com20020_check(struct net_device *dev)
/* Enable TX */
outb(0x39, _CONFIG);
- outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
+ outb(inb(ioaddr + BUS_ALIGN * 8), ioaddr + BUS_ALIGN * 7);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
@@ -193,7 +193,7 @@ int com20020_found(struct net_device *dev, int shared)
lp->hw.close = com20020_close;
if (!dev->dev_addr[0])
- dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */
+ dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN * 8); /* FIXME: do this some other way! */
SET_SUBADR(SUB_SETUP1);
outb(lp->setup, _XREG);
@@ -202,7 +202,7 @@ int com20020_found(struct net_device *dev, int shared)
{
SET_SUBADR(SUB_SETUP2);
outb(lp->setup2, _XREG);
-
+
/* must now write the magic "restart operation" command */
mdelay(1);
outb(0x18, _COMMAND);
@@ -232,7 +232,7 @@ int com20020_found(struct net_device *dev, int shared)
BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
- lp->setup >> 1,
+ lp->setup >> 1,
clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
if (register_netdev(dev)) {
@@ -243,9 +243,9 @@ int com20020_found(struct net_device *dev, int shared)
}
-/*
+/*
* Do a hardware reset on the card, and set up necessary registers.
- *
+ *
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*
@@ -258,15 +258,15 @@ static int com20020_reset(struct net_device *dev, int really_reset)
u_char inbyte;
BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
- __FILE__,__LINE__,__func__,dev,lp,dev->name);
+ __FILE__, __LINE__, __func__, dev, lp, dev->name);
BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
dev->name, ASTATUS());
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
/* power-up defaults */
SETCONF;
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (really_reset) {
/* reset the card */
@@ -274,22 +274,22 @@ static int com20020_reset(struct net_device *dev, int really_reset)
mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
}
/* clear flags & end reset */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
/* verify that the ARCnet signature byte is present */
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (inbyte != TESTvalue) {
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
return 1;
}
/* enable extended (512-byte) packets */
ACOMMAND(CONFIGcmd | EXTconf);
- BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+ BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
/* done! return success. */
return 0;
@@ -299,7 +299,7 @@ static int com20020_reset(struct net_device *dev, int really_reset)
static void com20020_setmask(struct net_device *dev, int mask)
{
u_int ioaddr = dev->base_addr;
- BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
+ BUGMSG(D_DURING, "Setting mask to %x at %x\n", mask, ioaddr);
AINTMASK(mask);
}
@@ -315,7 +315,7 @@ static int com20020_status(struct net_device *dev)
{
u_int ioaddr = dev->base_addr;
- return ASTATUS() + (ADIAGSTATUS()<<8);
+ return ASTATUS() + (ADIAGSTATUS() << 8);
}
static void com20020_close(struct net_device *dev)
diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
index 057d958..f687521 100644
--- a/drivers/net/arcnet/com20020_cs.c
+++ b/drivers/net/arcnet/com20020_cs.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM20020 PCMCIA support
- *
+ *
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
@@ -19,14 +19,14 @@
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
- *
+ *
* **********************
* Changes:
* Arnaldo Carvalho de Melo <acme@...ectiva.com.br> - 08/08/2000
* - reorganize kmallocs in com20020_attach, checking all for failure
* and releasing the previous allocations if one fails
* **********************
- *
+ *
* For more details, see drivers/net/arcnet.c
*
* **********************
@@ -53,33 +53,33 @@
static void regdump(struct net_device *dev)
{
#ifdef DEBUG
- int ioaddr = dev->base_addr;
- int count;
-
- netdev_dbg(dev, "register dump:\n");
- for (count = ioaddr; count < ioaddr + 16; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
- pr_cont(" %02X", inb(count));
- }
- pr_cont("\n");
-
- netdev_dbg(dev, "buffer0 dump:\n");
+ int ioaddr = dev->base_addr;
+ int count;
+
+ netdev_dbg(dev, "register dump:\n");
+ for (count = ioaddr; count < ioaddr + 16; count++)
+ {
+ if (!(count % 16))
+ pr_cont("%04X:", count);
+ pr_cont(" %02X", inb(count));
+ }
+ pr_cont("\n");
+
+ netdev_dbg(dev, "buffer0 dump:\n");
/* set up the address register */
- count = 0;
+ count = 0;
outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
outb(count & 0xff, _ADDR_LO);
-
- for (count = 0; count < 256+32; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
-
- /* copy the data */
- pr_cont(" %02X", inb(_MEMDATA));
- }
- pr_cont("\n");
+
+ for (count = 0; count < 256 + 32; count++)
+ {
+ if (!(count % 16))
+ pr_cont("%04X:", count);
+
+ /* copy the data */
+ pr_cont(" %02X", inb(_MEMDATA));
+ }
+ pr_cont("\n");
#endif
}
@@ -114,169 +114,169 @@ static void com20020_detach(struct pcmcia_device *p_dev);
static int com20020_probe(struct pcmcia_device *p_dev)
{
- struct com20020_dev *info;
- struct net_device *dev;
- struct arcnet_local *lp;
+ struct com20020_dev *info;
+ struct net_device *dev;
+ struct arcnet_local *lp;
- dev_dbg(&p_dev->dev, "com20020_attach()\n");
+ dev_dbg(&p_dev->dev, "com20020_attach()\n");
- /* Create new network device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto fail_alloc_info;
+ /* Create new network device */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ goto fail_alloc_info;
- dev = alloc_arcdev("");
- if (!dev)
- goto fail_alloc_dev;
+ dev = alloc_arcdev("");
+ if (!dev)
+ goto fail_alloc_dev;
- lp = netdev_priv(dev);
- lp->timeout = timeout;
- lp->backplane = backplane;
- lp->clockp = clockp;
- lp->clockm = clockm & 3;
- lp->hw.owner = THIS_MODULE;
+ lp = netdev_priv(dev);
+ lp->timeout = timeout;
+ lp->backplane = backplane;
+ lp->clockp = clockp;
+ lp->clockm = clockm & 3;
+ lp->hw.owner = THIS_MODULE;
- /* fill in our module parameters as defaults */
- dev->dev_addr[0] = node;
+ /* fill in our module parameters as defaults */
+ dev->dev_addr[0] = node;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = 16;
- p_dev->config_flags |= CONF_ENABLE_IRQ;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
- info->dev = dev;
- p_dev->priv = info;
+ info->dev = dev;
+ p_dev->priv = info;
- return com20020_config(p_dev);
+ return com20020_config(p_dev);
fail_alloc_dev:
- kfree(info);
+ kfree(info);
fail_alloc_info:
- return -ENOMEM;
+ return -ENOMEM;
} /* com20020_attach */
static void com20020_detach(struct pcmcia_device *link)
{
- struct com20020_dev *info = link->priv;
- struct net_device *dev = info->dev;
+ struct com20020_dev *info = link->priv;
+ struct net_device *dev = info->dev;
- dev_dbg(&link->dev, "detach...\n");
+ dev_dbg(&link->dev, "detach...\n");
- dev_dbg(&link->dev, "com20020_detach\n");
+ dev_dbg(&link->dev, "com20020_detach\n");
- dev_dbg(&link->dev, "unregister...\n");
+ dev_dbg(&link->dev, "unregister...\n");
- unregister_netdev(dev);
+ unregister_netdev(dev);
- /*
- * this is necessary because we register our IRQ separately
- * from card services.
- */
- if (dev->irq)
- free_irq(dev->irq, dev);
+ /*
+ * this is necessary because we register our IRQ separately
+ * from card services.
+ */
+ if (dev->irq)
+ free_irq(dev->irq, dev);
- com20020_release(link);
+ com20020_release(link);
- /* Unlink device structure, free bits */
- dev_dbg(&link->dev, "unlinking...\n");
- if (link->priv)
- {
- dev = info->dev;
- if (dev)
+ /* Unlink device structure, free bits */
+ dev_dbg(&link->dev, "unlinking...\n");
+ if (link->priv)
{
- dev_dbg(&link->dev, "kfree...\n");
- free_netdev(dev);
+ dev = info->dev;
+ if (dev)
+ {
+ dev_dbg(&link->dev, "kfree...\n");
+ free_netdev(dev);
+ }
+ dev_dbg(&link->dev, "kfree2...\n");
+ kfree(info);
}
- dev_dbg(&link->dev, "kfree2...\n");
- kfree(info);
- }
} /* com20020_detach */
static int com20020_config(struct pcmcia_device *link)
{
- struct arcnet_local *lp;
- struct com20020_dev *info;
- struct net_device *dev;
- int i, ret;
- int ioaddr;
+ struct arcnet_local *lp;
+ struct com20020_dev *info;
+ struct net_device *dev;
+ int i, ret;
+ int ioaddr;
+
+ info = link->priv;
+ dev = info->dev;
- info = link->priv;
- dev = info->dev;
+ dev_dbg(&link->dev, "config...\n");
- dev_dbg(&link->dev, "config...\n");
+ dev_dbg(&link->dev, "com20020_config\n");
- dev_dbg(&link->dev, "com20020_config\n");
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int)link->resource[0]->start);
- dev_dbg(&link->dev, "baseport1 is %Xh\n",
- (unsigned int) link->resource[0]->start);
+ i = -ENODEV;
+ link->io_lines = 16;
- i = -ENODEV;
- link->io_lines = 16;
+ if (!link->resource[0]->start)
+ {
+ for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
+ {
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
+ if (i == 0)
+ break;
+ }
+ }
+ else
+ i = pcmcia_request_io(link);
+
+ if (i != 0)
+ {
+ dev_dbg(&link->dev, "requestIO failed totally!\n");
+ goto failed;
+ }
+
+ ioaddr = dev->base_addr = link->resource[0]->start;
+ dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
+
+ dev_dbg(&link->dev, "request IRQ %d\n",
+ link->irq);
+ if (!link->irq)
+ {
+ dev_dbg(&link->dev, "requestIRQ failed totally!\n");
+ goto failed;
+ }
- if (!link->resource[0]->start)
- {
- for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
+ dev->irq = link->irq;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ if (com20020_check(dev))
{
- link->resource[0]->start = ioaddr;
- i = pcmcia_request_io(link);
- if (i == 0)
- break;
+ regdump(dev);
+ goto failed;
}
- }
- else
- i = pcmcia_request_io(link);
-
- if (i != 0)
- {
- dev_dbg(&link->dev, "requestIO failed totally!\n");
- goto failed;
- }
-
- ioaddr = dev->base_addr = link->resource[0]->start;
- dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
-
- dev_dbg(&link->dev, "request IRQ %d\n",
- link->irq);
- if (!link->irq)
- {
- dev_dbg(&link->dev, "requestIRQ failed totally!\n");
- goto failed;
- }
-
- dev->irq = link->irq;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- if (com20020_check(dev))
- {
- regdump(dev);
- goto failed;
- }
-
- lp = netdev_priv(dev);
- lp->card_name = "PCMCIA COM20020";
- lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- i = com20020_found(dev, 0); /* calls register_netdev */
-
- if (i != 0) {
- dev_notice(&link->dev,
- "com20020_found() failed\n");
- goto failed;
- }
-
- netdev_dbg(dev, "port %#3lx, irq %d\n",
- dev->base_addr, dev->irq);
- return 0;
+
+ lp = netdev_priv(dev);
+ lp->card_name = "PCMCIA COM20020";
+ lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
+
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ i = com20020_found(dev, 0); /* calls register_netdev */
+
+ if (i != 0) {
+ dev_notice(&link->dev,
+ "com20020_found() failed\n");
+ goto failed;
+ }
+
+ netdev_dbg(dev, "port %#3lx, irq %d\n",
+ dev->base_addr, dev->irq);
+ return 0;
failed:
- dev_dbg(&link->dev, "com20020_config failed...\n");
- com20020_release(link);
- return -ENODEV;
+ dev_dbg(&link->dev, "com20020_config failed...\n");
+ com20020_release(link);
+ return -ENODEV;
} /* com20020_config */
static void com20020_release(struct pcmcia_device *link)
@@ -312,9 +312,9 @@ static int com20020_resume(struct pcmcia_device *link)
static const struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
- "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
+ "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
PCMCIA_DEVICE_PROD_ID12("SoHard AG",
- "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
+ "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index 487d780..23ac9ed 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM90xx chipset (IO-mapped buffers)
- *
+ *
* Written 1997 by David Woodhouse.
* Written 1994-1999 by Avery Pennarun.
* Written 1999-2000 by Martin Mares <mj@....cz>.
@@ -60,23 +60,23 @@ static void com90io_copy_from_card(struct net_device *dev, int bufnum, int offse
#define ARCNET_TOTAL_SIZE 16
/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0) /* writable */
-#define _STATUS (ioaddr+0) /* readable */
-#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
-#define _RESET (ioaddr+8) /* software reset (on read) */
-#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr+15) /* Control registers for said */
-#define _ADDR_LO (ioaddr+14)
-#define _CONFIG (ioaddr+2) /* Configuration register */
+#define _INTMASK (ioaddr + 0) /* writable */
+#define _STATUS (ioaddr + 0) /* readable */
+#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
+#define _RESET (ioaddr + 8) /* software reset (on read) */
+#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
+#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
+#define _ADDR_LO (ioaddr + 14)
+#define _CONFIG (ioaddr + 2) /* Configuration register */
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk) outb((msk),_INTMASK)
-#define SETCONF() outb((lp->config),_CONFIG)
+#define ACOMMAND(cmd) outb((cmd), _COMMAND)
+#define AINTMASK(msk) outb((msk), _INTMASK)
+#define SETCONF() outb((lp->config), _CONFIG)
/****************************************************************************
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index b80fbe4..a4c5d59 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - COM90xx chipset (memory-mapped buffers)
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@....cz>.
* Derived from skeleton.c by Donald Becker.
@@ -77,25 +77,25 @@ static int numcards;
/* Amount of I/O memory used by the card */
#define BUFFER_SIZE (512)
-#define MIRROR_SIZE (BUFFER_SIZE*4)
+#define MIRROR_SIZE (BUFFER_SIZE * 4)
/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0) /* writable */
-#define _STATUS (ioaddr+0) /* readable */
-#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
-#define _CONFIG (ioaddr+2) /* Configuration register */
-#define _RESET (ioaddr+8) /* software reset (on read) */
-#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr+15) /* Control registers for said */
-#define _ADDR_LO (ioaddr+14)
+#define _INTMASK (ioaddr + 0) /* writable */
+#define _STATUS (ioaddr + 0) /* readable */
+#define _COMMAND (ioaddr + 1) /* writable, returns random vals on read (?) */
+#define _CONFIG (ioaddr + 2) /* Configuration register */
+#define _RESET (ioaddr + 8) /* software reset (on read) */
+#define _MEMDATA (ioaddr + 12) /* Data port for IO-mapped memory */
+#define _ADDR_HI (ioaddr + 15) /* Control registers for said */
+#define _ADDR_LO (ioaddr + 14)
#undef ASTATUS
#undef ACOMMAND
#undef AINTMASK
#define ASTATUS() inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk) outb((msk),_INTMASK)
+#define ACOMMAND(cmd) outb((cmd), _COMMAND)
+#define AINTMASK(msk) outb((msk), _INTMASK)
static int com90xx_skip_probe __initdata = 0;
@@ -127,12 +127,12 @@ static void __init com90xx_probe(void)
if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
return;
- shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
+ shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long),
GFP_KERNEL);
if (!shmems)
return;
- iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
- GFP_KERNEL);
+ iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *),
+ GFP_KERNEL);
if (!iomem) {
kfree(shmems);
return;
@@ -579,7 +579,7 @@ static void com90xx_setmask(struct net_device *dev, int mask)
/*
* Do a hardware reset on the card, and set up necessary registers.
- *
+ *
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*
diff --git a/drivers/net/arcnet/rfc1051.c b/drivers/net/arcnet/rfc1051.c
index f81db40..ae1ded2 100644
--- a/drivers/net/arcnet/rfc1051.c
+++ b/drivers/net/arcnet/rfc1051.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@@ -84,12 +84,12 @@ MODULE_LICENSE("GPL");
/*
* Determine a packet's protocol ID.
- *
+ *
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
- struct archdr *pkt = (struct archdr *) skb->data;
+ struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
@@ -146,7 +146,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
/* up to sizeof(pkt->soft) has already been copied from the card */
memcpy(pkt, pkthdr, sizeof(struct archdr));
@@ -169,7 +169,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
- struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+ struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
/* set the protocol ID according to RFC1051 */
@@ -201,7 +201,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
+ /*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode.
*/
diff --git a/drivers/net/arcnet/rfc1201.c b/drivers/net/arcnet/rfc1201.c
index b71431a..bf2a8cb 100644
--- a/drivers/net/arcnet/rfc1201.c
+++ b/drivers/net/arcnet/rfc1201.c
@@ -1,6 +1,6 @@
/*
* Linux ARCnet driver - RFC1201 (standard) packet encapsulation
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
@@ -86,12 +86,12 @@ module_exit(arcnet_rfc1201_exit);
/*
* Determine a packet's protocol ID.
- *
+ *
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
- struct archdr *pkt = (struct archdr *) skb->data;
+ struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
@@ -169,7 +169,7 @@ static void rx(struct net_device *dev, int bufnum,
if (in->skb) { /* already assembling one! */
BUGMSG(D_EXTRA, "aborting assembly (seq=%d) for unsplit packet (splitflag=%d, seq=%d)\n",
- in->sequence, soft->split_flag, soft->sequence);
+ in->sequence, soft->split_flag, soft->sequence);
lp->rfc1201.aborted_seq = soft->sequence;
dev_kfree_skb_irq(in->skb);
dev->stats.rx_errors++;
@@ -187,7 +187,7 @@ static void rx(struct net_device *dev, int bufnum,
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
/* up to sizeof(pkt->soft) has already been copied from the card */
@@ -203,11 +203,11 @@ static void rx(struct net_device *dev, int bufnum,
* (which is impossible to fumble) and insert it ourselves.
*/
if (soft->proto == ARC_P_ARP) {
- struct arphdr *arp = (struct arphdr *) soft->payload;
+ struct arphdr *arp = (struct arphdr *)soft->payload;
/* make sure addresses are the right length */
if (arp->ar_hln == 1 && arp->ar_pln == 4) {
- uint8_t *cptr = (uint8_t *) arp + sizeof(struct arphdr);
+ uint8_t *cptr = (uint8_t *)arp + sizeof(struct arphdr);
if (!*cptr) { /* is saddr = 00? */
BUGMSG(D_EXTRA,
@@ -274,7 +274,7 @@ static void rx(struct net_device *dev, int bufnum,
dev_kfree_skb_irq(in->skb);
}
in->sequence = soft->sequence;
- in->numpackets = ((unsigned) soft->split_flag >> 1) + 2;
+ in->numpackets = ((unsigned)soft->split_flag >> 1) + 2;
in->lastpacket = 1;
if (in->numpackets > 16) {
@@ -294,7 +294,7 @@ static void rx(struct net_device *dev, int bufnum,
return;
}
skb->dev = dev;
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
soft = &pkt->soft.rfc1201;
memcpy(pkt, pkthdr, ARC_HDR_SIZE + RFC1201_HDR_SIZE);
@@ -302,7 +302,7 @@ static void rx(struct net_device *dev, int bufnum,
soft->split_flag = 0; /* end result won't be split */
} else { /* not first packet */
- int packetnum = ((unsigned) soft->split_flag >> 1) + 1;
+ int packetnum = ((unsigned)soft->split_flag >> 1) + 1;
/*
* if we're not assembling, there's no point trying to
@@ -341,7 +341,7 @@ static void rx(struct net_device *dev, int bufnum,
in->lastpacket = in->numpackets = 0;
return;
}
- pkt = (struct archdr *) in->skb->data;
+ pkt = (struct archdr *)in->skb->data;
soft = &pkt->soft.rfc1201;
}
@@ -357,10 +357,10 @@ static void rx(struct net_device *dev, int bufnum,
in->skb = NULL;
in->lastpacket = in->numpackets = 0;
- BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n",
- skb->len, pkt->hard.source);
- BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n",
- skb->len, pkt->hard.source);
+ BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (unsplit)\n",
+ skb->len, pkt->hard.source);
+ BUGMSG(D_SKB_SIZE, "skb: received %d bytes from %02X (split)\n",
+ skb->len, pkt->hard.source);
BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
skb->protocol = type_trans(skb, dev);
@@ -376,7 +376,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
{
struct arcnet_local *lp = netdev_priv(dev);
int hdr_size = ARC_HDR_SIZE + RFC1201_HDR_SIZE;
- struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+ struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
struct arc_rfc1201 *soft = &pkt->soft.rfc1201;
/* set the protocol ID according to RFC1201 */
@@ -424,7 +424,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
+ /*
* FIXME: fill in the last byte of the dest ipaddr here to better
* comply with RFC1051 in "noarp" mode. For now, always broadcasting
* will probably at least get packets sent out :)
@@ -517,7 +517,7 @@ static int continue_tx(struct net_device *dev, int bufnum)
int seglen;
BUGMSG(D_DURING,
- "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
+ "rfc1201 continue_tx: loading segment %d(+1) of %d (seq=%d)\n",
out->segnum, out->numsegs, soft->sequence);
/* the "new" soft header comes right before the data chunk */
diff --git a/include/linux/arcdevice.h b/include/linux/arcdevice.h
index df03562..ccfd1d2 100644
--- a/include/linux/arcdevice.h
+++ b/include/linux/arcdevice.h
@@ -51,7 +51,7 @@
/*
* Debugging bitflags: each option can be enabled individually.
- *
+ *
* Note: only debug flags included in the ARCNET_DEBUG_MAX define will
* actually be available. GCC will (at least, GCC 2.7.0 will) notice
* lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
@@ -77,33 +77,33 @@
#endif
#ifndef ARCNET_DEBUG
-#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
+#define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
#endif
extern int arcnet_debug;
/* macros to simplify debug checking */
-#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
-#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
-#define BUGMSG(x,msg,args...) \
- BUGMSG2(x, "%s%6s: " msg, \
- x==D_NORMAL ? KERN_WARNING \
- : x < D_DURING ? KERN_INFO : KERN_DEBUG, \
- dev->name , ## args)
+#define BUGLVL(x) if ((ARCNET_DEBUG_MAX) & arcnet_debug & (x))
+#define BUGMSG2(x, msg, args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
+#define BUGMSG(x, msg, args...) \
+ BUGMSG2(x, "%s%6s: " msg, \
+ x == D_NORMAL ? KERN_WARNING \
+ : x < D_DURING ? KERN_INFO : KERN_DEBUG, \
+ dev->name, ## args)
/* see how long a function call takes to run, expressed in CPU cycles */
-#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
- unsigned long _x, _y; \
- _x = get_cycles(); \
- call; \
- _y = get_cycles(); \
- BUGMSG(D_TIMING, \
- "%s: %d bytes in %lu cycles == " \
- "%lu Kbytes/100Mcycle\n",\
- name, bytes, _y - _x, \
- 100000000 / 1024 * bytes / (_y - _x + 1));\
- } \
- else { \
- call;\
+#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
+ unsigned long _x, _y; \
+ _x = get_cycles(); \
+ call; \
+ _y = get_cycles(); \
+ BUGMSG(D_TIMING, \
+ "%s: %d bytes in %lu cycles == " \
+ "%lu Kbytes/100Mcycle\n", \
+ name, bytes, _y - _x, \
+ 100000000 / 1024 * bytes / (_y - _x + 1)); \
+ } \
+ else { \
+ call; \
}
@@ -189,16 +189,16 @@ struct ArcProto {
int mtu; /* largest possible packet */
int is_ip; /* This is a ip plugin - not a raw thing */
- void (*rx) (struct net_device * dev, int bufnum,
- struct archdr * pkthdr, int length);
- int (*build_header) (struct sk_buff * skb, struct net_device *dev,
- unsigned short ethproto, uint8_t daddr);
+ void (*rx)(struct net_device *dev, int bufnum,
+ struct archdr *pkthdr, int length);
+ int (*build_header)(struct sk_buff *skb, struct net_device *dev,
+ unsigned short ethproto, uint8_t daddr);
/* these functions return '1' if the skb can now be freed */
- int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
- int bufnum);
- int (*continue_tx) (struct net_device * dev, int bufnum);
- int (*ack_tx) (struct net_device * dev, int acked);
+ int (*prepare_tx)(struct net_device *dev, struct archdr *pkt, int length,
+ int bufnum);
+ int (*continue_tx)(struct net_device *dev, int bufnum);
+ int (*ack_tx)(struct net_device *dev, int acked);
};
extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
@@ -263,13 +263,13 @@ struct arcnet_local {
* situations in which we (for example) want to pre-load a transmit
* buffer, or start receiving while we copy a received packet to
* memory.
- *
+ *
* The rules: only the interrupt handler is allowed to _add_ buffers to
* the queue; thus, this doesn't require a lock. Both the interrupt
* handler and the transmit function will want to _remove_ buffers, so
* we need to handle the situation where they try to do it at the same
* time.
- *
+ *
* If next_buf == first_free_buf, the queue is empty. Since there are
* only four possible buffers, the queue should never be full.
*/
@@ -298,17 +298,17 @@ struct arcnet_local {
/* hardware-specific functions */
struct {
struct module *owner;
- void (*command) (struct net_device * dev, int cmd);
- int (*status) (struct net_device * dev);
- void (*intmask) (struct net_device * dev, int mask);
- int (*reset) (struct net_device * dev, int really_reset);
- void (*open) (struct net_device * dev);
- void (*close) (struct net_device * dev);
-
- void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
- void *buf, int count);
- void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
- void *buf, int count);
+ void (*command)(struct net_device *dev, int cmd);
+ int (*status)(struct net_device *dev);
+ void (*intmask)(struct net_device *dev, int mask);
+ int (*reset)(struct net_device *dev, int really_reset);
+ void (*open)(struct net_device *dev);
+ void (*close)(struct net_device *dev);
+
+ void (*copy_to_card)(struct net_device *dev, int bufnum, int offset,
+ void *buf, int count);
+ void (*copy_from_card)(struct net_device *dev, int bufnum, int offset,
+ void *buf, int count);
} hw;
void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
@@ -325,7 +325,7 @@ struct arcnet_local {
#if ARCNET_DEBUG_MAX & D_SKB
void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
#else
-#define arcnet_dump_skb(dev,skb,desc) ;
+#define arcnet_dump_skb(dev, skb, desc) ;
#endif
void arcnet_unregister_proto(struct ArcProto *proto);
@@ -335,7 +335,7 @@ struct net_device *alloc_arcdev(const char *name);
int arcnet_open(struct net_device *dev);
int arcnet_close(struct net_device *dev);
netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
- struct net_device *dev);
+ struct net_device *dev);
void arcnet_timeout(struct net_device *dev);
#endif /* __KERNEL__ */
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists