| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1443106819-5549-9-git-send-email-madalin.bucur@freescale.com>
Date: Thu, 24 Sep 2015 18:00:19 +0300
From: Madalin Bucur <madalin.bucur@...escale.com>
To: <netdev@...r.kernel.org>
CC: <linuxppc-dev@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
<davem@...emloft.net>, <scottwood@...escale.com>,
<igal.liberman@...escale.com>, <roy.pledge@...escale.com>,
<ppc@...dchasers.com>, <joe@...ches.com>, <pebolle@...cali.nl>,
<joakim.tjernlund@...nsmode.se>, <f.fainelli@...il.com>,
<stsp@...t.ru>, Madalin Bucur <madalin.bucur@...escale.com>,
Ruxandra Ioana Radulescu <ruxandra.radulescu@...escale.com>
Subject: [v3 8/8] dpaa_eth: add trace points
Add trace points on the hot processing path.
Signed-off-by: Ruxandra Ioana Radulescu <ruxandra.radulescu@...escale.com>
---
drivers/net/ethernet/freescale/dpaa/Makefile | 1 +
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 12 ++
drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 4 +
.../net/ethernet/freescale/dpaa/dpaa_eth_trace.h | 141 +++++++++++++++++++++
4 files changed, 158 insertions(+)
create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile
index 141ade4..15ed1c4 100644
--- a/drivers/net/ethernet/freescale/dpaa/Makefile
+++ b/drivers/net/ethernet/freescale/dpaa/Makefile
@@ -9,3 +9,4 @@ ccflags-y += -I$(FMAN)
obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o
fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o dpaa_ethtool.o dpaa_eth_sysfs.o
+CFLAGS_dpaa_eth.o := -I$(src)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 6d241a3..2b99428 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -57,6 +57,12 @@
#include "dpaa_eth.h"
#include "dpaa_eth_common.h"
+/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
+ * using trace events only need to #include <trace/events/sched.h>
+ */
+#define CREATE_TRACE_POINTS
+#include "dpaa_eth_trace.h"
+
#define DPA_NAPI_WEIGHT 64
/* Valid checksum indication */
@@ -229,6 +235,9 @@ priv_rx_default_dqrr(struct qman_portal *portal,
priv = netdev_priv(net_dev);
dpa_bp = priv->dpa_bp;
+ /* Trace the Rx fd */
+ trace_dpa_rx_fd(net_dev, fq, &dq->fd);
+
/* IRQ handler, non-migratable; safe to use raw_cpu_ptr here */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
count_ptr = raw_cpu_ptr(dpa_bp->percpu_count);
@@ -285,6 +294,9 @@ priv_tx_conf_default_dqrr(struct qman_portal *portal,
net_dev = ((struct dpa_fq *)fq)->net_dev;
priv = netdev_priv(net_dev);
+ /* Trace the fd */
+ trace_dpa_tx_conf_fd(net_dev, fq, &dq->fd);
+
/* Non-migratable context, safe to use raw_cpu_ptr */
percpu_priv = raw_cpu_ptr(priv->percpu_priv);
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index a16119e..44368c8 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -36,6 +36,7 @@
#include "fman.h"
#include "mac.h"
+#include "dpaa_eth_trace.h"
extern int dpa_rx_extra_headroom;
extern int dpa_max_frm;
@@ -406,6 +407,9 @@ static inline int dpa_xmit(struct dpa_priv_s *priv,
if (fd->bpid == 0xff)
fd->cmd |= qman_fq_fqid(priv->conf_fqs[queue]);
+ /* Trace this Tx fd */
+ trace_dpa_tx_fd(priv->net_dev, egress_fq, fd);
+
for (i = 0; i < 100000; i++) {
err = qman_enqueue(egress_fq, fd, 0);
if (err != -EBUSY)
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
new file mode 100644
index 0000000..3b67477
--- /dev/null
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth_trace.h
@@ -0,0 +1,141 @@
+/* Copyright 2013-2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dpaa_eth
+
+#if !defined(_DPAA_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _DPAA_ETH_TRACE_H
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include "dpaa_eth.h"
+#include <linux/tracepoint.h>
+
+#define fd_format_name(format) { qm_fd_##format, #format }
+#define fd_format_list \
+ fd_format_name(contig), \
+ fd_format_name(sg)
+
+/* This is used to declare a class of events.
+ * individual events of this type will be defined below.
+ */
+
+/* Store details about a frame descriptor and the FQ on which it was
+ * transmitted/received.
+ */
+DECLARE_EVENT_CLASS(dpaa_eth_fd,
+ /* Trace function prototype */
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ /* Repeat argument list here */
+ TP_ARGS(netdev, fq, fd),
+
+ /* A structure containing the relevant information we want to record.
+ * Declare name and type for each normal element, name, type and size
+ * for arrays. Use __string for variable length strings.
+ */
+ TP_STRUCT__entry(
+ __field(u32, fqid)
+ __field(u64, fd_addr)
+ __field(u8, fd_format)
+ __field(u16, fd_offset)
+ __field(u32, fd_length)
+ __field(u32, fd_status)
+ __string(name, netdev->name)
+ ),
+
+ /* The function that assigns values to the above declared fields */
+ TP_fast_assign(
+ __entry->fqid = fq->fqid;
+ __entry->fd_addr = qm_fd_addr_get64(fd);
+ __entry->fd_format = fd->format;
+ __entry->fd_offset = dpa_fd_offset(fd);
+ __entry->fd_length = dpa_fd_length(fd);
+ __entry->fd_status = fd->status;
+ __assign_str(name, netdev->name);
+ ),
+
+ /* This is what gets printed when the trace event is triggered */
+ TP_printk("[%s] fqid=%d, fd: addr=0x%llx, format=%s, off=%u, len=%u, status=0x%08x",
+ __get_str(name), __entry->fqid, __entry->fd_addr,
+ __print_symbolic(__entry->fd_format, fd_format_list),
+ __entry->fd_offset, __entry->fd_length, __entry->fd_status)
+);
+
+/* Now declare events of the above type. Format is:
+ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class
+ */
+
+/* Tx (egress) fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Rx fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_rx_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* Tx confirmation fd */
+DEFINE_EVENT(dpaa_eth_fd, dpa_tx_conf_fd,
+
+ TP_PROTO(struct net_device *netdev,
+ struct qman_fq *fq,
+ const struct qm_fd *fd),
+
+ TP_ARGS(netdev, fq, fd)
+);
+
+/* If only one event of a certain type needs to be declared, use TRACE_EVENT().
+ * The syntax is the same as for DECLARE_EVENT_CLASS().
+ */
+
+#endif /* _DPAA_ETH_TRACE_H */
+
+/* This must be outside ifdef _DPAA_ETH_TRACE_H */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE dpaa_eth_trace
+#include <trace/define_trace.h>
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists