| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <560358B5.3050403@hisilicon.com>
Date: Thu, 24 Sep 2015 09:58:13 +0800
From: huangdaode <huangdaode@...ilicon.com>
To: Rob Herring <robh@...nel.org>
CC: <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<catalin.marinas@....com>, <will.deacon@....com>,
<liguozhu@...ilicon.com>, <Yisen.Zhuang@...wei.com>,
<davem@...emloft.net>, <paul.gortmaker@...driver.com>,
<dingtianhong@...wei.com>, <zhangfei.gao@...aro.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
<linuxarm@...wei.com>, <salil.mehta@...wei.com>,
<kenneth-lee-2012@...mail.com>, <xuwei5@...ilicon.com>,
<lisheng011@...wei.com>
Subject: Re: [PATCH v2 1/5] net: add Hisilicon Network Subsystem support (config
and documents)
On 2015/9/21 22:52, Rob Herring wrote:
> On 09/17/2015 01:51 AM, huangdaode wrote:
>> The Hisilicon Network Subsystem is a long term evolution IP which is
>> supposed to be used in Hisilicon ICT SoC. The IP, which is called hns
>> for short, is a TCP/IP acceleration engine, which can directly decode
>> TCP/IP stream and distribute them to different ring buffers.
>>
>> HNS can be configured to work on different mode for different scenario.
>> This patch make use only some of the mode to make it as standard
>> ethernet NIC. The other mode will be added soon.
>>
>> The whole function has 4 kernel sub-modules:
>>
>> hnae: the HNS acceleration engine framework. It provides a abstract
>> interface between the engine and the upper layers which make use of the
>> engine by ring buffer.
>>
>> hns_enet_drv: a standard ethernet driver that base on the ring buffer.
>>
>> hns_dsaf: one of the implementation of HNS acceleration engine, which is
>> applied on Hililicon hip05, Hi1610 and other later-on SoCs
>>
>> hns_mdio: the mdio control to the PHY, used by acceleration engine
>>
>> This submit add basic config and documents
>>
>> Signed-off-by: huangdaode <huangdaode@...ilicon.com>
>> Signed-off-by: Kenneth Lee <liguozhu@...wei.com>
>> Signed-off-by: Yisen Zhuang <Yisen.Zhuang@...wei.com>
>> ---
>> .../bindings/net/hisilicon-hip04-net.txt | 4 +-
>> .../devicetree/bindings/net/hisilicon-hns-dsaf.txt | 49 ++++++
>> .../devicetree/bindings/net/hisilicon-hns-mdio.txt | 22 +++
>> .../devicetree/bindings/net/hisilicon-hns-nic.txt | 47 +++++
>> arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi | 193 +++++++++++++++++++++
>> 5 files changed, 313 insertions(+), 2 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
>>
>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
>> index 988fc69..d1df8a0 100644
>> --- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
>> @@ -32,13 +32,13 @@ Required properties:
>>
>> Required properties:
>>
>> -- compatible: should be "hisilicon,hip04-mdio".
>> +- compatible: should be "hisilicon,mdio".
> Why are you removing the old one? Please use more specific compatible
> strings, not less specific.
we have unified the hip04_mdio.c and hip05_mdio.c into hns_mdio.c, so
we plan use
"hisilicon,mdio", "hisilicon,hns-mdio" "hisilicon,hns-mdio Vx", in this
case, "hisilicon, mdio "
is more suitable for us, meanwhile, we will upstream hip04 dts file
later, and will apply the
compatible property with "hisilicon,mdio".
>> - Inherits from MDIO bus node binding [2]
>> [2] Documentation/devicetree/bindings/net/phy.txt
>>
>> Example:
>> mdio {
>> - compatible = "hisilicon,hip04-mdio";
>> + compatible = "hisilicon,mdio";
>> reg = <0x28f1000 0x1000>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
>> new file mode 100644
>> index 0000000..80411b2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
>> @@ -0,0 +1,49 @@
>> +Hisilicon DSA Fabric device controller
>> +
>> +Required properties:
>> +- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
>> + "hisilicon,hns-dsaf-v1" is for hip05.
>> + "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
>> +- dsa-name: dsa fabric name who provide this interface.
>> + should be "dsafX", X is the dsaf id.
> What is this for? Find a different way to distinguish instances other
> than an index.
our driver support multi dsaf, so X in dsafX is the dsaf id.
the enet driver interface use the dsa-name to match the dsaf engine,
then get it's handle.
when there are 2 dsafs ,we use dsaf0 and dsaf1 to distinguish them. The
default is dsaf0.
>> +- mode: dsa fabric mode string. only support one of dsaf modes like these:
>> + "2port-64vf",
>> + "6port-16rss",
>> + "6port-16vf".
>> +- interrupt-parent: the interrupt parent of this device.
>> +- interrupts: should contain the DSA Fabric and rcb interrupt.
>> +- reg: specifies base physical address(es) and size of the device registers.
>> + The first region is external interface control register base and size.
>> + The second region is SerDes base register and size.
>> + The third region is the PPE register base and size.
>> + The fourth region is dsa fabric base register and size.
>> + The fifth region is cpld base register and size, it is not required if do not use cpld.
>> +- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1].
>> +- buf-size: rx buffer size, should be 16-1024.
> This is a h/w property?
yes. it's.
>> +- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096.
> This is a h/w property?
yes.
>> +
>> +[1] Documentation/devicetree/bindings/net/phy.txt
>> +
>> +Example:
>> +
>> +dsa: dsa@...00000 {
>> + compatible = "hisilicon,hns-dsaf-v1";
>> + dsa_name = "dsaf0";
>> + mode = "6port-16rss";
>> + interrupt-parent = <&mbigen_dsa>;
>> + reg = <0x0 0xC0000000 0x0 0x420000
>> + 0x0 0xC2000000 0x0 0x300000
>> + 0x0 0xc5000000 0x0 0x890000
>> + 0x0 0xc7000000 0x0 0x60000>;
>> + phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>;
>> + interrupts = <131 4>,<132 4>, <133 4>,<134 4>,
>> + <135 4>,<136 4>, <137 4>,<138 4>,
>> + <139 4>,<140 4>, <141 4>,<142 4>,
>> + <143 4>,<144 4>, <145 4>,<146 4>,
>> + <147 4>,<148 4>, <384 1>,<385 1>,
>> + <386 1>,<387 1>, <388 1>,<389 1>,
>> + <390 1>,<391 1>,
>> + buf-size = <4096>;
>> + desc-num = <1024>;
>> + dma-coherent;
>> +};
>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
>> new file mode 100644
>> index 0000000..9940aa0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt
>> @@ -0,0 +1,22 @@
>> +Hisilicon MDIO bus controller
>> +
>> +Properties:
>> +- compatible: "hisilicon,mdio","hisilicon,hns-mdio".
> How is this related to the other MDIO ctrlr?
hns-mdio module only supports Hisilicon SoCs, such as hip04, hip05 and
other later on SoC MDIO ctrlr.
what does the other MDIO ctrlr mean?
>
> Most specific string should come first.
agreed.
>
>> +- reg: The base address of the MDIO bus controller register bank.
>> +- #address-cells: Must be <1>.
>> +- #size-cells: Must be <0>. MDIO addresses have no size component.
>> +
>> +Typically an MDIO bus might have several children.
>> +
>> +Example:
>> + mdio@...c0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "hisilicon,mdio","hisilicon,hns-mdio";
>> + reg = <0x0 0x803c0000 0x0 0x10000>;
>> +
>> + ethernet-phy@0 {
>> + ...
>> + reg = <0>;
>> + };
>> + };
>> diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
>> new file mode 100644
>> index 0000000..41d19be
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
>> @@ -0,0 +1,47 @@
>> +Hisilicon Network Subsystem NIC controller
>> +
>> +Required properties:
>> +- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
>> + "hisilicon,hns-nic-v1" is for hip05.
>> + "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
>> +- ae-name: accelerator name who provides this interface,
>> + is simply a name referring to the name of name in the accelerator node.
> Why is this needed?
this is used to distinguish the different SOCs, the driver use it
recognize the current SoC(such as hip05,hi1610 and later on SoCs ) on
board.
>> +- port-id: is the index of port provided by DSAF (the accelerator). DSAF can
>> + connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
>> + are called debug ports.
> Could the OF graph binding be used to describe this connection?
sorry, i can not exactly get your points.
could you please explain it clearly?
>> +
>> + The remaining 6 PHYs are taken according to the mode of DSAF.
>> +
>> + In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU. The
>> + port-id can be 2 to 7. Here is the diagram:
>> + +-----+---------------+
>> + | CPU |
>> + +-+-+-+---+-+-+-+-+-+-+
>> + | | | | | | | |
>> + debug service
>> + port port
>> + (0,1) (2-7)
>> +
>> + In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a
>> + LAN Switch while the CPU side assume itself have one single NIC connect to
>> + this switch. In this case, the port-id will be 2 only.
>> + +-----+---------------+
>> + | CPU |
>> + +-+-+-+---+-+-+-+-+-+-+
>> + | | service| port(2)
>> + debug +------------+
>> + port | switch |
>> + (0,1) +-+-+-+-+-+-++
>> + | | | | | |
>> + external port
>> +
>> +- local-mac-address: mac addr of the ethernet interface
>> +
>> +Example:
>> +
>> + ethernet@0{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <0>;
>> + local-mac-address = [a2 14 e4 4b 56 76];
>> + };
>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
>> new file mode 100644
>> index 0000000..3500586
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
>> @@ -0,0 +1,193 @@
>> +soc0: soc@...000000 {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + device_type = "soc";
>> + compatible = "simple-bus";
>> + ranges = <0x0 0x0 0x0 0x0 0x1 0x0>;
>> + chip-id = <0>;
>> +
>> + soc0_mdio0: mdio@...c0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "hisilicon,hns-mdio";
>> + reg = <0x0 0x803c0000 0x0 0x10000
>> + 0x0 0x80000000 0x0 0x10000>;
>> +
>> + soc0_phy4: ethernet-phy@4 {
>> + reg = <0x0>;
> Should be 4?
on hip05 d02 board, this Phy is connected to port4, since this is the
file describe the device
connection, so 4 is more specific than 0.
>
>> + device_type = "ethernet-phy";
> Drop device_type.
agreed.
>
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + };
>> + soc0_phy5: ethernet-phy@5 {
>> + reg = <0x1>;
> Should be 5? Or unit-address should be 1.
the reason is same with 4.
>
>> + device_type = "ethernet-phy";
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + };
>> + };
>> +
>> + dsa: dsa@...00000 {
>> + compatible = "hisilicon,hns-dsaf-v1";
>> + dsa_name = "dsaf0";
>> + mode = "6port-16rss";
>> + interrupt-parent = <&mbigen_dsa>;
>> +
>> + reg = <0x0 0xC0000000 0x0 0x420000
>> + 0x0 0xC2000000 0x0 0x300000
>> + 0x0 0xc5000000 0x0 0x890000
>> + 0x0 0xc7000000 0x0 0x60000
>> + >;
>> +
>> + phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>;
>> + interrupts = <
>> + /* [14] ge fifo err 8 / xge 6**/
>> + 149 0x4 150 0x4 151 0x4 152 0x4
>> + 153 0x4 154 0x4 26 0x4 27 0x4
>> + 155 0x4 156 0x4 157 0x4 158 0x4 159 0x4 160 0x4
>> + /* [12] rcb com 4*3**/
>> + 0x6 0x4 0x7 0x4 0x8 0x4 0x9 0x4
>> + 16 0x4 17 0x4 18 0x4 19 0x4
>> + 22 0x4 23 0x4 24 0x4 25 0x4
>> + /* [8] ppe tnl 0-7***/
>> + 0x0 0x4 0x1 0x4 0x2 0x4 0x3 0x4
>> + 0x4 0x4 0x5 0x4 12 0x4 13 0x4
>> + /* [21] dsaf event int 3+18**/
>> + 128 0x4 129 0x4 130 0x4
>> + 0x83 0x4 0x84 0x4 0x85 0x4 0x86 0x4 0x87 0x4 0x88 0x4
>> + 0x89 0x4 0x8a 0x4 0x8b 0x4 0x8c 0x4 0x8d 0x4 0x8e 0x4
>> + 0x8f 0x4 0x90 0x4 0x91 0x4 0x92 0x4 0x93 0x4 0x94 0x4
>> + /* [4] debug rcb 2*2*/
>> + 0xe 0x1 0xf 0x1 0x14 0x1 0x15 0x1
>> + /* [256] sevice rcb 2*128*/
>> + 0x180 0x1 0x181 0x1 0x182 0x1 0x183 0x1
>> + 0x184 0x1 0x185 0x1 0x186 0x1 0x187 0x1
>> + 0x188 0x1 0x189 0x1 0x18a 0x1 0x18b 0x1
>> + 0x18c 0x1 0x18d 0x1 0x18e 0x1 0x18f 0x1
>> + 0x190 0x1 0x191 0x1 0x192 0x1 0x193 0x1
>> + 0x194 0x1 0x195 0x1 0x196 0x1 0x197 0x1
>> + 0x198 0x1 0x199 0x1 0x19a 0x1 0x19b 0x1
>> + 0x19c 0x1 0x19d 0x1 0x19e 0x1 0x19f 0x1
>> + 0x1a0 0x1 0x1a1 0x1 0x1a2 0x1 0x1a3 0x1
>> + 0x1a4 0x1 0x1a5 0x1 0x1a6 0x1 0x1a7 0x1
>> + 0x1a8 0x1 0x1a9 0x1 0x1aa 0x1 0x1ab 0x1
>> + 0x1ac 0x1 0x1ad 0x1 0x1ae 0x1 0x1af 0x1
>> + 0x1b0 0x1 0x1b1 0x1 0x1b2 0x1 0x1b3 0x1
>> + 0x1b4 0x1 0x1b5 0x1 0x1b6 0x1 0x1b7 0x1
>> + 0x1b8 0x1 0x1b9 0x1 0x1ba 0x1 0x1bb 0x1
>> + 0x1bc 0x1 0x1bd 0x1 0x1be 0x1 0x1bf 0x1
>> + 0x1c0 0x1 0x1c1 0x1 0x1c2 0x1 0x1c3 0x1
>> + 0x1c4 0x1 0x1c5 0x1 0x1c6 0x1 0x1c7 0x1
>> + 0x1c8 0x1 0x1c9 0x1 0x1ca 0x1 0x1cb 0x1
>> + 0x1cc 0x1 0x1cd 0x1 0x1ce 0x1 0x1cf 0x1
>> + 0x1d0 0x1 0x1d1 0x1 0x1d2 0x1 0x1d3 0x1
>> + 0x1d4 0x1 0x1d5 0x1 0x1d6 0x1 0x1d7 0x1
>> + 0x1d8 0x1 0x1d9 0x1 0x1da 0x1 0x1db 0x1
>> + 0x1dc 0x1 0x1dd 0x1 0x1de 0x1 0x1df 0x1
>> + 0x1e0 0x1 0x1e1 0x1 0x1e2 0x1 0x1e3 0x1
>> + 0x1e4 0x1 0x1e5 0x1 0x1e6 0x1 0x1e7 0x1
>> + 0x1e8 0x1 0x1e9 0x1 0x1ea 0x1 0x1eb 0x1
>> + 0x1ec 0x1 0x1ed 0x1 0x1ee 0x1 0x1ef 0x1
>> + 0x1f0 0x1 0x1f1 0x1 0x1f2 0x1 0x1f3 0x1
>> + 0x1f4 0x1 0x1f5 0x1 0x1f6 0x1 0x1f7 0x1
>> + 0x1f8 0x1 0x1f9 0x1 0x1fa 0x1 0x1fb 0x1
>> + 0x1fc 0x1 0x1fd 0x1 0x1fe 0x1 0x1ff 0x1
>> + 0x200 0x1 0x201 0x1 0x202 0x1 0x203 0x1
>> + 0x204 0x1 0x205 0x1 0x206 0x1 0x207 0x1
>> + 0x208 0x1 0x209 0x1 0x20a 0x1 0x20b 0x1
>> + 0x20c 0x1 0x20d 0x1 0x20e 0x1 0x20f 0x1
>> + 0x210 0x1 0x211 0x1 0x212 0x1 0x213 0x1
>> + 0x214 0x1 0x215 0x1 0x216 0x1 0x217 0x1
>> + 0x218 0x1 0x219 0x1 0x21a 0x1 0x21b 0x1
>> + 0x21c 0x1 0x21d 0x1 0x21e 0x1 0x21f 0x1
>> + 0x220 0x1 0x221 0x1 0x222 0x1 0x223 0x1
>> + 0x224 0x1 0x225 0x1 0x226 0x1 0x227 0x1
>> + 0x228 0x1 0x229 0x1 0x22a 0x1 0x22b 0x1
>> + 0x22c 0x1 0x22d 0x1 0x22e 0x1 0x22f 0x1
>> + 0x230 0x1 0x231 0x1 0x232 0x1 0x233 0x1
>> + 0x234 0x1 0x235 0x1 0x236 0x1 0x237 0x1
>> + 0x238 0x1 0x239 0x1 0x23a 0x1 0x23b 0x1
>> + 0x23c 0x1 0x23d 0x1 0x23e 0x1 0x23f 0x1
>> + 0x240 0x1 0x241 0x1 0x242 0x1 0x243 0x1
>> + 0x244 0x1 0x245 0x1 0x246 0x1 0x247 0x1
>> + 0x248 0x1 0x249 0x1 0x24a 0x1 0x24b 0x1
>> + 0x24c 0x1 0x24d 0x1 0x24e 0x1 0x24f 0x1
>> + 0x250 0x1 0x251 0x1 0x252 0x1 0x253 0x1
>> + 0x254 0x1 0x255 0x1 0x256 0x1 0x257 0x1
>> + 0x258 0x1 0x259 0x1 0x25a 0x1 0x25b 0x1
>> + 0x25c 0x1 0x25d 0x1 0x25e 0x1 0x25f 0x1
>> + 0x260 0x1 0x261 0x1 0x262 0x1 0x263 0x1
>> + 0x264 0x1 0x265 0x1 0x266 0x1 0x267 0x1
>> + 0x268 0x1 0x269 0x1 0x26a 0x1 0x26b 0x1
>> + 0x26c 0x1 0x26d 0x1 0x26e 0x1 0x26f 0x1
>> + 0x270 0x1 0x271 0x1 0x272 0x1 0x273 0x1
>> + 0x274 0x1 0x275 0x1 0x276 0x1 0x277 0x1
>> + 0x278 0x1 0x279 0x1 0x27a 0x1 0x27b 0x1
>> + 0x27c 0x1 0x27d 0x1 0x27e 0x1 0x27f 0x1>;
>> + buf-size = <4096>;
>> + desc-num = <1024>;
>> + dma-coherent;
>> + };
>> +
>> + eth0: ethernet@0{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <0>;
> These should perhaps be subnodes of dsaf. That would solve associating
> them with a particular dsaf.
>
> There is no register interface for these?
hns_enet works on top of the abstraction of ring buffer. It does not
touch the hardware configuration.
>> + local-mac-address = [00 00 00 01 00 58];
>> + status = "disabled";
>> + dma-coherent;
> Is this really per port?
in non dsaf mode, a port is a network interface, so the property is per
port under non dsaf mode.
we should specify every port information, so that the enet module can
identify each of them.
>> + };
>> + eth1: ethernet@1{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <1>;
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth2: ethernet@2{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <2>;
>> + local-mac-address = [00 00 00 01 00 5a];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth3: ethernet@3{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <3>;
>> + local-mac-address = [00 00 00 01 00 5b];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth4: ethernet@4{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <4>;
>> + local-mac-address = [00 00 00 01 00 5c];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth5: ethernet@5{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <5>;
>> + local-mac-address = [00 00 00 01 00 5d];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth6: ethernet@6{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <6>;
>> + local-mac-address = [00 00 00 01 00 5e];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> + eth7: ethernet@7{
>> + compatible = "hisilicon,hns-nic-v1";
>> + ae-name = "dsaf0";
>> + port-id = <7>;
>> + local-mac-address = [00 00 00 01 00 5f];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> +};
>>
thanks.
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists