| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 15 Oct 2015 21:00:22 +0100
From: Simon Arlott <simon@...e.lp0.eu>
To: netdev <netdev@...r.kernel.org>
Subject: [PATCH] bcm63xx_enet: check 1000BASE-T advertisement configuration
If a gigabit ethernet PHY is connected to a fast ethernet MAC,
then it can detect 1000 support from the partner but not use it.
This results in a forced speed of 1000 and RX/TX failure.
Check for 1000BASE-T support and then check the advertisement
configuration before setting the MAC speed to 1000mbit.
Signed-off-by: Simon Arlott <simon@...e.lp0.eu>
---
The BCM63168 has a gigabit ethernet PHY for one of the ports but only
a fast ethernet MAC as part of the enetsw interface.
The BCM63268 includes a configurable gigabit ethernet MAC with a
different interface "gmac" (this is a MIPS chip and it's not the same
interface as the ARM version).
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 33 ++++++++++++++++------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index a7f2cc3..4183c2a 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -2049,7 +2049,7 @@ static void swphy_poll_timer(unsigned long data)
for (i = 0; i < priv->num_ports; i++) {
struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
+ int val, j, up, advertise, lpa, speed, duplex, media;
int external_phy = bcm_enet_port_is_rgmii(i);
u8 override;
@@ -2092,22 +2092,27 @@ static void swphy_poll_timer(unsigned long data)
lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
MII_LPA);
- lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
- MII_STAT1000);
-
/* figure out media and duplex from advertise and LPA values */
media = mii_nway_result(lpa & advertise);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
- if (lpa2 & LPA_1000FULL)
- duplex = 1;
-
- if (lpa2 & (LPA_1000FULL | LPA_1000HALF))
- speed = 1000;
- else {
- if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
- speed = 100;
- else
- speed = 10;
+
+ if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+ speed = 100;
+ else
+ speed = 10;
+
+ if (val & BMSR_ESTATEN) {
+ advertise = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_CTRL1000);
+
+ lpa = bcmenet_sw_mdio_read(priv, external_phy,
+ port->phy_id, MII_STAT1000);
+
+ if (advertise & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)
+ && lpa & (LPA_1000FULL | LPA_1000HALF)) {
+ speed = 1000;
+ duplex = (lpa & LPA_1000FULL);
+ }
}
dev_info(&priv->pdev->dev,
--
2.1.4
--
Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists