netdev - Re: SoCFPGA ethernet broken

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <56200E15.9080603@caviumnetworks.com>
Date:	Thu, 15 Oct 2015 13:35:33 -0700
From:	David Daney <ddaney@...iumnetworks.com>
To:	Florian Fainelli <f.fainelli@...il.com>,
	Dinh Nguyen <dinguyen@...nsource.altera.com>
CC:	"David S. Miller" <davem@...emloft.net>, <david.daney@...ium.com>,
	<netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: SoCFPGA ethernet broken

On 10/15/2015 01:25 PM, Florian Fainelli wrote:
> On 15/10/15 12:59, Dinh Nguyen wrote:
>> On 10/15/2015 03:03 PM, Florian Fainelli wrote:
>>> On 15/10/15 12:09, Dinh Nguyen wrote:
>>>> Hi,
>>>>
>>>> commit "8b63ec1837fa phylib: Make PHYs children of their MDIO bus, not
>>>> the bus' parent." seems to have broken ethernet support for the SoCFPGA
>>>> platform which is using the stmmac ethernet driver.
>>>
>>> It is not clear to me how this relates to what you are seeing yet.
>>>
>>>>
>>>> It appears that during DHCP, it cannot get an IP address. This only
>>>> happens if ethernet was not used by the bootloader to tftp an kernel
>>>> image. If I use the bootloader to tftp an image then ethernet is working
>>>> fine. So I think the PHY is not getting enabled properly.
>>>>
>>>> If I revert this patch, then ethernet is back to working on the platform.
>>>
>>> Is the Device Tree source for this platform available somewhere to look at?
>>>
>>
>> Yes, I'm using the DTS that is in the mainline:
>>
>> arch/arm/boot/dts/socfpga.dtsi
>> arch/arm/boot/dts/socfpga_cyclone5.dtsi
>> arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
>
> There are no PHY devices in any of these DTS files, instead there is the
> non-standard "phy-addr" property which is set to 0xffffffff supposedly
> to indicate that the MDIO bus should be scanned. This is likely part of
> your problem. The stmmac driver seems to be looking for "snps,phy-addr"
> and not "phy-addr", so I am not even clear how this is supposed to work,
> and the driver mentions this custom property is deprecated anyway.
>

I think it is OK not to expose the PHYs in the device tree if they can 
be accurately probed without knowing information from the device tree.

> The core problem is in
> drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c::stmmac_mdio_register
> which manually detects the PHY, that is mostly fine, except that it does
> not really seem to work here for a reason that is still unclear to me.
>

I agree with this analysis.  I have also been looking at the code and 
cannot see anything that depends on what the parent device of the PHY 
is.  So it is a bit mystifying.


I noticed in your original message you had in the boot log this:

.
.
.
[    0.804992] libphy: stmmac: probed
[    0.808410] eth0: PHY ID 00221611 at 4 IRQ POLL (stmmac-0:04) active
.
.
.

Does this text change with and without the 8b63ec1837fa patch?
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html