netdev - [net-next 13/17] i40e: Fix order of checks when enabling/disabling autoneg in ethtool

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1445059711-45992-14-git-send-email-jeffrey.t.kirsher@intel.com>
Date:	Fri, 16 Oct 2015 22:28:27 -0700
From:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:	davem@...emloft.net
Cc:	Catherine Sullivan <catherine.sullivan@...el.com>,
	netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
	jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 13/17] i40e: Fix order of checks when enabling/disabling autoneg in ethtool

From: Catherine Sullivan <catherine.sullivan@...el.com>

We were previously checking if autoneg was allowed to change before
checking if autoneg was changing. We need to do this in the other order
or else we will erroneously return EINVAL when autoneg is not changing.

Change-ID: Iff9f7d1c9bddc1ad1e5d227d4f42754f90155410
Signed-off-by: Catherine Sullivan <catherine.sullivan@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 29 ++++++++++++++------------
 1 file changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 767b1db..6e5f931 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -661,28 +661,31 @@ static int i40e_set_settings(struct net_device *netdev,
 
 	/* Check autoneg */
 	if (autoneg == AUTONEG_ENABLE) {
-		/* If autoneg is not supported, return error */
-		if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
-			netdev_info(netdev, "Autoneg not supported on this phy\n");
-			return -EINVAL;
-		}
 		/* If autoneg was not already enabled */
 		if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
+			/* If autoneg is not supported, return error */
+			if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
+				netdev_info(netdev, "Autoneg not supported on this phy\n");
+				return -EINVAL;
+			}
+			/* Autoneg is allowed to change */
 			config.abilities = abilities.abilities |
 					   I40E_AQ_PHY_ENABLE_AN;
 			change = true;
 		}
 	} else {
-		/* If autoneg is supported 10GBASE_T is the only phy that
-		 * can disable it, so otherwise return error
-		 */
-		if (safe_ecmd.supported & SUPPORTED_Autoneg &&
-		    hw->phy.link_info.phy_type != I40E_PHY_TYPE_10GBASE_T) {
-			netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
-			return -EINVAL;
-		}
 		/* If autoneg is currently enabled */
 		if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
+			/* If autoneg is supported 10GBASE_T is the only PHY
+			 * that can disable it, so otherwise return error
+			 */
+			if (safe_ecmd.supported & SUPPORTED_Autoneg &&
+			    hw->phy.link_info.phy_type !=
+			    I40E_PHY_TYPE_10GBASE_T) {
+				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
+				return -EINVAL;
+			}
+			/* Autoneg is allowed to change */
 			config.abilities = abilities.abilities &
 					   ~I40E_AQ_PHY_ENABLE_AN;
 			change = true;
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html