lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAKh23Fnv5t=y_EhuvjBwoeN3nwPmx8bBCCAF5aH-4kLfk7_TzA@mail.gmail.com>
Date:	Fri, 23 Oct 2015 11:02:19 -0700
From:	Iyappan Subramanian <isubramanian@....com>
To:	Florian Fainelli <f.fainelli@...il.com>
Cc:	David Miller <davem@...emloft.net>,
	netdev <netdev@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>, patches <patches@....com>
Subject: Re: [PATCH net-next 1/2] drivers: net: xgene: Add support RGMII TX/RX
 delay configuration

On Fri, Oct 16, 2015 at 2:36 PM, Florian Fainelli <f.fainelli@...il.com> wrote:
> On 16/10/15 13:35, Iyappan Subramanian wrote:
>> Add RGMII TX/RX delay configuration support. RGMII standard requires 2ns
>> delay to help the RGMII bridge receiver to sample data correctly. If the
>> default value does not provide proper centering of the data sample, the
>> TX/RX delay parameters can be used to adjust accordingly.
>
> There is a standard 'phy-mode' property which can take multiple values
> for RGMII: "rgmii" (no delay), "rgmii-txid" (transmit delay),
> "rgmii-rxid" (receive delay) and "rgmii-id" (symetric delay). There does
> not seem to be any verification of whether the rx or tx delay parameters
> you introduce are going to be either sensible, or not conflicting with
> the 'phy-mode' that should be configured.

X-Gene RGMII ethernet controller has a RGMII bridge that performs the
task of converting the RGMII signal {RX_CLK,RX_CTL, RX_DATA[3:0]} from
PHY to GMII signal {RX_DV,RX_ER,RX_DATA[7:0]} and vice versa.  This
RGMII bridge has a provision to internally delay the input RX_CLK and
the output TX_CLK using configuration registers. This will help in
maintain the CLK-CTL delay relationship in various operating
conditions.

This is similar to the following patch that got accepted.
https://lkml.org/lkml/2014/12/29/77

I will submit v2 with updated documentation.

>
>>
>> Signed-off-by: Iyappan Subramanian <isubramanian@....com>
>> ---
>>  drivers/net/ethernet/apm/xgene/xgene_enet_hw.c   |  8 +++-
>>  drivers/net/ethernet/apm/xgene/xgene_enet_hw.h   |  1 +
>>  drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 49 ++++++++++++++++++++++++
>>  drivers/net/ethernet/apm/xgene/xgene_enet_main.h |  2 +
>>  4 files changed, 59 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> index 652f218..33850a0 100644
>> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
>> @@ -461,6 +461,7 @@ static void xgene_gmac_reset(struct xgene_enet_pdata *pdata)
>>
>>  static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
>>  {
>> +     struct device *dev = &pdata->pdev->dev;
>>       u32 value, mc2;
>>       u32 intf_ctl, rgmii;
>>       u32 icm0, icm2;
>> @@ -490,7 +491,12 @@ static void xgene_gmac_init(struct xgene_enet_pdata *pdata)
>>       default:
>>               ENET_INTERFACE_MODE2_SET(&mc2, 2);
>>               intf_ctl |= ENET_GHD_MODE;
>> -             CFG_TXCLK_MUXSEL0_SET(&rgmii, 4);
>> +
>> +             if (dev->of_node) {
>> +                     CFG_TXCLK_MUXSEL0_SET(&rgmii, pdata->tx_delay);
>> +                     CFG_RXCLK_MUXSEL0_SET(&rgmii, pdata->rx_delay);
>> +             }
>> +
>>               xgene_enet_rd_csr(pdata, DEBUG_REG_ADDR, &value);
>>               value |= CFG_BYPASS_UNISEC_TX | CFG_BYPASS_UNISEC_RX;
>>               xgene_enet_wr_csr(pdata, DEBUG_REG_ADDR, value);
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
>> index ff05bbc..6dee73c 100644
>> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
>> @@ -144,6 +144,7 @@ enum xgene_enet_rm {
>>  #define CFG_BYPASS_UNISEC_RX         BIT(1)
>>  #define CFG_CLE_BYPASS_EN0           BIT(31)
>>  #define CFG_TXCLK_MUXSEL0_SET(dst, val)      xgene_set_bits(dst, val, 29, 3)
>> +#define CFG_RXCLK_MUXSEL0_SET(dst, val)      xgene_set_bits(dst, val, 26, 3)
>>
>>  #define CFG_CLE_IP_PROTOCOL0_SET(dst, val)   xgene_set_bits(dst, val, 16, 2)
>>  #define CFG_CLE_DSTQID0_SET(dst, val)                xgene_set_bits(dst, val, 0, 12)
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> index 6b1846d..ce10687 100644
>> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
>> @@ -1118,6 +1118,47 @@ static int xgene_get_port_id_dt(struct device *dev, struct xgene_enet_pdata *pda
>>       return ret;
>>  }
>>
>> +static int xgene_get_tx_delay(struct xgene_enet_pdata *pdata)
>> +{
>> +     struct device *dev = &pdata->pdev->dev;
>> +     int delay, ret;
>> +
>> +     ret = of_property_read_u32(dev->of_node, "tx-delay", &delay);
>> +     if (ret) {
>> +             pdata->tx_delay = 4;
>> +             return 0;
>> +     }
>> +
>> +     if (delay < 0 || delay > 7) {
>> +             dev_err(dev, "Invalid tx-delay specified\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     pdata->tx_delay = delay;
>> +
>> +     return 0;
>> +}
>> +
>> +static int xgene_get_rx_delay(struct xgene_enet_pdata *pdata)
>> +{
>> +     struct device *dev = &pdata->pdev->dev;
>> +     int delay, ret;
>> +
>> +     ret = of_property_read_u32(dev->of_node, "rx-delay", &delay);
>> +     if (ret) {
>> +             pdata->rx_delay = 2;
>> +             return 0;
>> +     }
>> +
>> +     if (delay < 0 || delay > 7) {
>> +             dev_err(dev, "Invalid rx-delay specified\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     pdata->rx_delay = delay;
>> +
>> +     return 0;
>> +}
>>
>>  static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
>>  {
>> @@ -1194,6 +1235,14 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)
>>               return -ENODEV;
>>       }
>>
>> +     ret = xgene_get_tx_delay(pdata);
>> +     if (ret)
>> +             return ret;
>> +
>> +     ret = xgene_get_rx_delay(pdata);
>> +     if (ret)
>> +             return ret;
>> +
>>       ret = platform_get_irq(pdev, 0);
>>       if (ret <= 0) {
>>               dev_err(dev, "Unable to get ENET Rx IRQ\n");
>> diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
>> index ff89a5d..a6e56b8 100644
>> --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
>> +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
>> @@ -184,6 +184,8 @@ struct xgene_enet_pdata {
>>       u8 bp_bufnum;
>>       u16 ring_num;
>>       u32 mss;
>> +     u8 tx_delay;
>> +     u8 rx_delay;
>>  };
>>
>>  struct xgene_indirect_ctl {
>>
>
>
> --
> Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ