lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1445560348-29872-3-git-send-email-bpoirier@suse.com>
Date:	Thu, 22 Oct 2015 17:32:28 -0700
From:	Benjamin Poirier <bpoirier@...e.com>
To:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Cc:	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Shannon Nelson <shannon.nelson@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Matthew Vick <matthew.vick@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	Mitch Williams <mitch.a.williams@...el.com>,
	intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] e1000e: Fix msi-x interrupt automask

Since the introduction of 82574 support in e1000e, the driver has worked on
the assumption that msi-x interrupt generation is automatically disabled
after each irq. As it turns out, this is not the case. Currently, rx
interrupts can fire multiple times before and during napi processing. This
can be a problem for users because frames that arrive in a certain window
(after adapter->clean_rx() but before napi_complete_done() has cleared
NAPI_STATE_SCHED) generate an interrupt which does not lead to
napi_schedule(). These frames sit in the rx queue until another frame
arrives (a tcp retransmit for example).

While the EIAC and CTRL_EXT registers are properly configured for irq
automask, the modification of IAM in e1000_configure_msix() is what
prevents automask from working as intended.

This patch removes that erroneous write and fixes interrupt rearming for tx
and "other" interrupts. Since e1000_msix_other() reads ICR, all interrupts
must be rearmed in that function.

Reported-by: Frank Steiner <steiner-reg@....ifi.lmu.de>
Signed-off-by: Benjamin Poirier <bpoirier@...e.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index a228167..8881256 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -1921,7 +1921,8 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
 
 no_link_interrupt:
 	if (!test_bit(__E1000_DOWN, &adapter->state))
-		ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
+		ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
+		     E1000_IMS_LSC);
 
 	return IRQ_HANDLED;
 }
@@ -1940,6 +1941,9 @@ static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
 		/* Ring was not completely cleaned, so fire another interrupt */
 		ew32(ICS, tx_ring->ims_val);
 
+	if (!test_bit(__E1000_DOWN, &adapter->state))
+		ew32(IMS, E1000_IMS_TXQ0);
+
 	return IRQ_HANDLED;
 }
 
@@ -2027,11 +2031,7 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
 
 	/* enable MSI-X PBA support */
 	ctrl_ext = er32(CTRL_EXT);
-	ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
-
-	/* Auto-Mask Other interrupts upon ICR read */
-	ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
-	ctrl_ext |= E1000_CTRL_EXT_EIAME;
+	ctrl_ext |= E1000_CTRL_EXT_PBA_CLR | E1000_CTRL_EXT_EIAME;
 	ew32(CTRL_EXT, ctrl_ext);
 	e1e_flush();
 }
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ