[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1445960180-3450-3-git-send-email-ogerlitz@mellanox.com>
Date: Tue, 27 Oct 2015 17:36:20 +0200
From: Or Gerlitz <ogerlitz@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Carol L Soto <clsoto@...ux.vnet.ibm.com>,
Jack Morgenstein <jackm@....mellanox.co.il>,
Or Gerlitz <ogerlitz@...lanox.com>
Subject: [PATCH net 2/2] net/mlx4: Copy/set only sizeof struct mlx4_eqe bytes
From: Carol L Soto <clsoto@...ux.vnet.ibm.com>
When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.
If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.
When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure. This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).
However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct. This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".
Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@...ux.vnet.ibm.com>
Signed-off-by: Jack Morgenstein <jackm@....mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 0a32020..2177e56 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2398,7 +2398,7 @@ int mlx4_multi_func_init(struct mlx4_dev *dev)
}
}
- memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+ memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
INIT_WORK(&priv->mfunc.master.comm_work,
mlx4_master_comm_channel);
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index c344884..603d1c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -196,7 +196,7 @@ static void slave_event(struct mlx4_dev *dev, u8 slave, struct mlx4_eqe *eqe)
return;
}
- memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+ memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
s_eqe->slave_id = slave;
/* ensure all information is written before setting the ownersip bit */
dma_wmb();
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists