netdev - Re: [PATCH v4] net/bonding: send arp in interval if no active slave

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5633BE00.5090509@redknee.com>
Date:	Fri, 30 Oct 2015 19:59:12 +0100
From:	Uwe Koziolek <uwe.koziolek@...knee.com>
To:	Jarod Wilson <jarod@...hat.com>,
	Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
CC:	<linux-kernel@...r.kernel.org>,
	Jay Vosburgh <jay.vosburgh@...onical.com>,
	Andy Gospodarek <gospo@...ulusnetworks.com>,
	Veaceslav Falico <vfalico@...il.com>, <netdev@...r.kernel.org>
Subject: Re: [PATCH v4] net/bonding: send arp in interval if no active slave

> Nikolay Aleksandrov wrote:
>> On 10/06/2015 09:53 PM, Jarod Wilson wrote:
>>> From: Uwe Koziolek<uwe.koziolek@...knee.com>
>>>
>>> With some very finicky switch hardware, active backup bonding can get into
>>> a situation where we play ping-pong between interfaces, trying to get one
>>> to come up as the active slave. There seems to be an issue with the
>>> switch's arp replies either taking too long, or simply getting lost, so we
>>> wind up unable to get any interface up and active. Sometimes, the issue
>>> sorts itself out after a while, sometimes it doesn't.
>>>
>>> Testing with num_grat_arp has proven fruitless, but sending an additional
>>> arp on curr_arp_slave if we're still in the arp_interval timeslice in
>>> bond_ab_arp_probe(), has shown to produce 100% reliability in testing with
>>> this hardware combination.
>>>
>>> [jarod: manufacturing of changelog, addition of modparam gating]
>>> CC: Jay Vosburgh<jay.vosburgh@...onical.com>
>>> CC: Andy Gospodarek<gospo@...ulusnetworks.com>
>>> CC: Veaceslav Falico<vfalico@...il.com>
>>> CC: netdev@...r.kernel.org
>>> Signed-off-by: Uwe Koziolek<uwe.koziolek@...knee.com>
>>> Signed-off-by: Jarod Wilson<jarod@...hat.com>
>>> ---
>>> v2: add code comment as to why change is needed
>>> v3: fix wrapping of comments
>>> v4: [jarod] add module parameter gating of code addition
>>>
>> Hi all,
>> As Andy already stated I'm not a fan of such workarounds either but it's
>> necessary sometimes so if this is going to be actually considered then a
>> few things need to be fixed. Please make this a proper bonding option
>> which can be changed at runtime and not only via a module parameter.
>
> Okay, I can give that a shot, however...
>
>> Now, I saw that you've only tested with 500 ms, can't this be fixed by using
>> a different interval ? This seems like a very specific problem to have a
>> whole new option for.
>
> ...I'll wait until we've heard confirmation from Uwe that intervals other than 500ms don't fix things.
>
A test with 5000 ms don't fix the problem. Tested with Cisco C3750, 4 bonds.

>> I really want to say fix the switch but I know that's not an option. :-)
>
> Yeah, unfortunately not!
>
>> A few minor nits below,
>>
>>>   drivers/net/bonding/bond_main.c | 24 ++++++++++++++++++++++++
>>>   include/net/bonding.h           |  1 +
>>>   2 files changed, 25 insertions(+)
>>>
>>> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>>> index 90f2615..72ab512 100644
>>> --- a/drivers/net/bonding/bond_main.c
>>> +++ b/drivers/net/bonding/bond_main.c
>>> @@ -95,6 +95,7 @@ static int miimon;
>>>   static int updelay;
>>>   static int downdelay;
>>>   static int use_carrier    = 1;
>>> +static int arp_slow_switch;
>>>   static char *mode;
>>>   static char *primary;
>>>   static char *primary_reselect;
>>> @@ -133,6 +134,10 @@ MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
>>>   module_param(use_carrier, int, 0);
>>>   MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
>>>                     "0 for off, 1 for on (default)");
>>> +module_param(arp_slow_switch, int, 0);
>>> +MODULE_PARM_DESC(arp_slow_switch, "Do extra arp checks for switches with arp "
>>> +                  "caches that are slow to update; "
>>> +                  "0 for off (default), 1 for on");
>>>   module_param(mode, charp, 0);
>>>   MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, "
>>>                  "1 for active-backup, 2 for balance-xor, "
>>> @@ -2793,6 +2798,18 @@ static bool bond_ab_arp_probe(struct bonding *bond)
>>>               return should_notify_rtnl;
>>>       }
>>>
>>> +    /* Sometimes the forwarding tables of the switches are not update
>> ^ s/update/updated/
>
> D'oh. Fixed locally.
>
>>> @@ -4280,6 +4297,12 @@ static int bond_check_params(struct bond_params *params)
>>>           use_carrier = 1;
>>>       }
>>>
>>> +    if ((arp_slow_switch != 0) &&  (arp_slow_switch != 1)) {
>> ^^ no need for the extra ()
>
> Copy-pasta from use_carrier checks right above it. Never quite sure if I should stick with the same possibly sub-optimal
> formatting conventions already in the file, try to fix them while also fixing bugs, or just mix styles...
>
>
>>> +        pr_warn("Warning: arp_slow_switch module parameter (%d), not of valid value (0/1), so it was set to 1\n",
>>> +            arp_slow_switch);
>>> +        arp_slow_switch = 1;
>> ^^ please default to old behaviour in this case (0)
>
> Will do.
>
Uwe Koziolek

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html