| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f970215bd46efe3ea3dc5c7fccfa0509@visp.net.lb> Date: Tue, 03 Nov 2015 22:24:15 +0200 From: Denys Fedoryshchenko <nuclearcat@...learcat.com> To: Eric Dumazet <eric.dumazet@...il.com> Cc: Netdev <netdev@...r.kernel.org> Subject: Re: HTB, HFSC, PIE, FIFO stuck on 2.4Gbit on default values On 2015-11-03 21:49, Eric Dumazet wrote: > > Well, I am telling you. > > Say no to people advising to turn off GRO/TSO. > > If you were the guy adviding others to do so, it is time to see the > light. > > Lets fix the bugs if any, instead of spreading disinformation. > > I am so tired of telling these very simple facts guys. > > If you prefer, continue to work on linux-2.0 but don't ask help on > netdev. I wont argue on that, you are right. Ok, then it is a bit offtopic in current case, different setup, but i know this one has easy to reproduce issues with offloading. but this is bug related to that, directly appearing when i enable tso/gso/gro. I am losing access to remote box, so max i can do right now: ethtool -K eth0 tso on gso on gro on; sleep 5;ethtool -K eth0 tso off gso off gro off No shapers, just plain nat. I suspect it might be specific to network card, but not sure. 4.1.4 02:00.0 "Class 0200" "8086" "10d3" "8086" "357a" driver: e1000e version: 2.3.2-k firmware-version: 0.13-4 bus-info: 0000:00:19.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: no But after that messages, honestly i don't know where to dig. [6606122.904234] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang: [6606122.904234] TDH <a5> [6606122.904234] TDT <ad> [6606122.904234] next_to_use <ad> [6606122.904234] next_to_clean <a3> [6606122.904234] buffer_info[next_to_clean]: [6606122.904234] time_stamp <12761e88c> [6606122.904234] next_to_watch <a5> [6606122.904234] jiffies <12761e928> [6606122.904234] next_to_watch.status <0> [6606122.904234] MAC Status <40080083> [6606122.904234] PHY Status <796d> [6606122.904234] PHY 1000BASE-T Status <3800> [6606122.904234] PHY Extended Status <3000> [6606122.904234] PCI Status <10> [6606124.903733] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang: [6606124.903733] TDH <a5> [6606124.903733] TDT <ad> [6606124.903733] next_to_use <ad> [6606124.903733] next_to_clean <a3> [6606124.903733] buffer_info[next_to_clean]: [6606124.903733] time_stamp <12761e88c> [6606124.903733] next_to_watch <a5> [6606124.903733] jiffies <12761e9f0> [6606124.903733] next_to_watch.status <0> [6606124.903733] MAC Status <40080083> [6606124.903733] PHY Status <796d> [6606124.903733] PHY 1000BASE-T Status <3800> [6606124.903733] PHY Extended Status <3000> [6606124.903733] PCI Status <10> [6606126.903291] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang: [6606126.903291] TDH <a5> [6606126.903291] TDT <ad> [6606126.903291] next_to_use <ad> [6606126.903291] next_to_clean <a3> [6606126.903291] buffer_info[next_to_clean]: [6606126.903291] time_stamp <12761e88c> [6606126.903291] next_to_watch <a5> [6606126.903291] jiffies <12761eab8> [6606126.903291] next_to_watch.status <0> [6606126.903291] MAC Status <40080083> [6606126.903291] PHY Status <796d> [6606126.903291] PHY 1000BASE-T Status <3800> [6606126.903291] PHY Extended Status <3000> [6606126.903291] PCI Status <10> [6606127.912352] ------------[ cut here ]------------ [6606127.912566] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x180/0x1e6() [6606127.912877] NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out [6606127.913067] Modules linked in: xt_CLASSIFY xt_set ipt_REJECT nf_reject_ipv4 nf_log_ipv4 nf_log_common xt_LOG xt_recent ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_nat xt_tcpudp nf_nat_pptp nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre ip_set_hash_net ip_set nfnetlink iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables act_nat cls_u32 sch_ingress [6606127.915843] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.4-build-0084 #1 [6606127.916035] Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0041.120520121743 12/05/2012 [6606127.916356] 0000000000000009 ffff88042f003dd8 ffffffff81896390 00000000000000fb [6606127.916903] ffff88042f003e28 ffff88042f003e18 ffffffff810bc024 ffffffff820aad98 [6606127.917451] ffffffff81830ab3 ffff8800be47c000 ffff88042a8dce00 0000000000000001 [6606127.917991] Call Trace: [6606127.918175] <IRQ> [<ffffffff81896390>] dump_stack+0x45/0x57 [6606127.918429] [<ffffffff810bc024>] warn_slowpath_common+0x97/0xb1 [6606127.918621] [<ffffffff81830ab3>] ? dev_watchdog+0x180/0x1e6 [6606127.918812] [<ffffffff810bc07f>] warn_slowpath_fmt+0x41/0x43 [6606127.919007] [<ffffffffa003930f>] ? nf_ct_delete+0x1ef/0x202 [nf_conntrack] [6606127.919201] [<ffffffff81830ab3>] dev_watchdog+0x180/0x1e6 [6606127.919396] [<ffffffffa0039322>] ? nf_ct_delete+0x202/0x202 [nf_conntrack] [6606127.919589] [<ffffffff81830933>] ? dev_graft_qdisc+0x65/0x65 [6606127.919781] [<ffffffff810ef971>] call_timer_fn.isra.27+0x17/0x6d [6606127.919975] [<ffffffff810f0235>] run_timer_softirq+0x1a0/0x1c4 [6606127.920169] [<ffffffff810be861>] __do_softirq+0xc3/0x1b2 [6606127.920359] [<ffffffff810bea9c>] irq_exit+0x37/0x7c [6606127.920551] [<ffffffff81028c2a>] smp_apic_timer_interrupt+0x3e/0x4a [6606127.920745] [<ffffffff8189d9b8>] apic_timer_interrupt+0x68/0x70 [6606127.920937] <EOI> [<ffffffff8100a34c>] ? mwait_idle+0x68/0x7e [6606127.921189] [<ffffffff8100aa07>] arch_cpu_idle+0xa/0xc [6606127.921379] [<ffffffff810e22af>] cpu_startup_entry+0x207/0x238 [6606127.921574] [<ffffffff818915d0>] rest_init+0x77/0x79 [6606127.921768] [<ffffffff820c7de8>] start_kernel+0x3f6/0x403 [6606127.921957] [<ffffffff820c77ea>] ? set_init_arg+0x55/0x55 [6606127.922149] [<ffffffff820c7442>] x86_64_start_reservations+0x2a/0x2c [6606127.922341] [<ffffffff820c7500>] x86_64_start_kernel+0xbc/0xc0 [6606127.922532] ---[ end trace c83a65027c0499d1 ]--- [6606127.922734] e1000e 0000:00:19.0 eth0: Reset adapter unexpectedly [6606131.827524] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists