[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <yw1xmvulpi6r.fsf@unicorn.mansr.com>
Date: Tue, 10 Nov 2015 23:07:24 +0000
From: Måns Rullgård <mans@...sr.com>
To: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: "linux-kernel\@vger.kernel.org" <linux-kernel@...r.kernel.org>,
netdev <netdev@...r.kernel.org>, slash.tmp@...e.fr
Subject: Re: [PATCH v5] net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controller
Andy Shevchenko <andy.shevchenko@...il.com> writes:
> On Wed, Nov 11, 2015 at 12:34 AM, Måns Rullgård <mans@...sr.com> wrote:
>> Andy Shevchenko <andy.shevchenko@...il.com> writes:
>>
>>>> +static inline void nb8800_maskb(struct nb8800_priv *priv, int reg,
>>>> + u32 mask, u32 val)
>>>> +{
>>>> + u32 old = nb8800_readb(priv, reg);
>>>> + u32 new = (old & ~mask) | val;
>>>
>>> Shoudn't be "… | (val & mask);" ?
>>
>> No, it's meant to replace the bits in mask with the corresponding bits
>> from val.
>
> But you unconditionally use entire val value which might bring bits
> outside of mask.
Very well, I'll apply the mask to both then.
>>>> + nb8800_writel(priv, NB8800_TX_DESC_ADDR, txb->dma_desc);
>>>> + wmb(); /* ensure desc addr is written before starting DMA */
>>>
>>> Hm… Have I missed corresponding rmb() ? If it's about MMIO, perhaps mmiowb() ?
>>
>> Possibly.
>
> Standalone wmb() doesn't make sense.
It does if you need to enforce ordering between normal and I/O memory.
In fact, since the descriptor is filled in using normal memory accesses,
my understanding is that mmiowb() would be insufficient here. The
comment could be improved, however.
--
Måns Rullgård
mans@...sr.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists