lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5645C0A5.2080506@cumulusnetworks.com>
Date:	Fri, 13 Nov 2015 11:51:17 +0100
From:	Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
To:	Jiri Pirko <jiri@...nulli.us>,
	Florian Fainelli <f.fainelli@...il.com>
Cc:	David Miller <davem@...emloft.net>, jarod@...hat.com,
	linux-kernel@...r.kernel.org, edumazet@...gle.com,
	j.vosburgh@...il.com, vfalico@...il.com, gospo@...ulusnetworks.com,
	razor@...ckwall.org, mkubecek@...e.cz, alexander.duyck@...il.com,
	netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
	Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: Re: [PATCH v2 net-next] net/core: ensure features get disabled on new
 lower devs

On 11/13/2015 11:29 AM, Jiri Pirko wrote:
> Fri, Nov 13, 2015 at 01:26:18AM CET, f.fainelli@...il.com wrote:
>> On 04/11/15 18:56, David Miller wrote:
>>>> Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
>>>  ...
>>>> Reported-by: Nikolay Aleksandrov <nikolay@...ulusnetworks.com>
>>>> Signed-off-by: Jarod Wilson <jarod@...hat.com>
>>>> ---
>>>> v2: Based on suggestions from Alex, and with not changing err to ret, this
>>>> patch actually becomes quite minimal and doesn't ugly up the code much.
>>>
>>> Applied, thanks.
>>
>> This causes some warnings to be displayed for DSA stacked devices:
>>
>> [    1.272297] brcm-sf2 f0b00000.ethernet_switch: Starfighter 2 top:
>> 4.00, core: 2.00 base: 0xf0c80000, IRQs: 68, 69
>> [    1.283181] libphy: dsa slave smi: probed
>> [    1.344088] f0b403c0.mdio:05: Broadcom BCM7445 PHY revision: 0xd0,
>> patch: 3
>> [    1.658917] brcm-sf2 f0b00000.ethernet_switch gphy (uninitialized):
>> attached PHY at address 5 [Broadcom BCM7445]
>> [    1.669414] brcm-sf2 f0b00000.ethernet_switch gphy: set_features()
>> failed (-1); wanted 0x0000000000004020, left 0x0000000000004820
>> [    1.734202] brcm-sf2 f0b00000.ethernet_switch rgmii_1
>> (uninitialized): attached PHY at address 0 [Generic PHY]
>> [    1.744486] brcm-sf2 f0b00000.ethernet_switch rgmii_1: set_features()
>> failed (-1); wanted 0x0000000000004020, left 0x0000000000004820
>> [    1.809091] brcm-sf2 f0b00000.ethernet_switch rgmii_2
>> (uninitialized): attached PHY at address 1 [Generic PHY]
>> [    1.819364] brcm-sf2 f0b00000.ethernet_switch rgmii_2: set_features()
>> failed (-1); wanted 0x0000000000004020, left 0x0000000000004820
>> [    1.884090] brcm-sf2 f0b00000.ethernet_switch moca (uninitialized):
>> attached PHY at address 2 [Generic PHY]
>> [    1.894109] brcm-sf2 f0b00000.ethernet_switch moca: set_features()
>> failed (-1); wanted 0x0000000000004020, left 0x0000000000004820
>>
>> DSA slave network devices are not associated with their master network
>> device using the typical lower/upper netdev helpers.
>>
>> I do not have a good fix to come up with yet, but if you see something
>> obvious with net/dsa/slave.c, feel free to send patches for testing, I
>> can boot net-next on this platform.
> 
> I'm having similar issues with bridge, with linus's git now:
> 
[snip]

Hmm, I think it's because the bridge and dsa/slave don't have ndo_set_features()
so err is left as -1 and thus an error is reported which isn't actually true.
Before in this case the features would just get set, so could you please try
the following patch ?


diff --git a/net/core/dev.c b/net/core/dev.c
index ab9b8d0d115e..4a1d198dbbff 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6426,6 +6426,8 @@ int __netdev_update_features(struct net_device *dev)
 
 	if (dev->netdev_ops->ndo_set_features)
 		err = dev->netdev_ops->ndo_set_features(dev, features);
+	else
+		err = 0;
 
 	if (unlikely(err < 0)) {
 		netdev_err(dev,
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ