| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1448181658-38111-4-git-send-email-blogic@openwrt.org>
Date: Sun, 22 Nov 2015 09:40:54 +0100
From: John Crispin <blogic@...nwrt.org>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Michael Lee <igvtee@...il.com>,
Felix Fietkau <nbd@...nwrt.org>,
Steven Liu (劉人豪)
<steven.liu@...iatek.com>,
Fred Chang (張嘉宏)
<Fred.Chang@...iatek.com>, John Crispin <blogic@...nwrt.org>
Subject: [RFC 4/8] net-next: ralink: add support for rt2880
rt2880 is the oldest SoC with this core. It has a single gBit port that will
normally be attached to an external phy of switch. The patch also adds the
code required to drive the mdio bus.
Signed-off-by: John Crispin <blogic@...nwrt.org>
Signed-off-by: Felix Fietkau <nbd@...nwrt.org>
Signed-off-by: Michael Lee <igvtee@...il.com>
---
drivers/net/ethernet/ralink/mdio_rt2880.c | 231 +++++++++++++++++++++++++++++
drivers/net/ethernet/ralink/mdio_rt2880.h | 23 +++
drivers/net/ethernet/ralink/soc_rt2880.c | 76 ++++++++++
3 files changed, 330 insertions(+)
create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c
create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h
create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c
diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
new file mode 100644
index 0000000..f3d19f0
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
@@ -0,0 +1,231 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@...nwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@...nwrt.org>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@...il.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+
+#include "ralink_soc_eth.h"
+#include "mdio_rt2880.h"
+#include "mdio.h"
+
+#define FE_MDIO_RETRY 1000
+
+static unsigned char *rt2880_speed_str(struct fe_priv *priv)
+{
+ switch (priv->phy->speed[0]) {
+ case SPEED_1000:
+ return "1000";
+ case SPEED_100:
+ return "100";
+ case SPEED_10:
+ return "10";
+ }
+
+ return "?";
+}
+
+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port)
+{
+ u32 mdio_cfg;
+
+ if (!priv->link[0]) {
+ netif_carrier_off(priv->netdev);
+ netdev_info(priv->netdev, "link down\n");
+ return;
+ }
+
+ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 |
+ FE_MDIO_CFG_RX_CLK_SKEW_200 |
+ FE_MDIO_CFG_GP1_FRC_EN;
+
+ if (priv->phy->duplex[0] == DUPLEX_FULL)
+ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX;
+
+ if (priv->phy->tx_fc[0])
+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX;
+
+ if (priv->phy->rx_fc[0])
+ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX;
+
+ switch (priv->phy->speed[0]) {
+ case SPEED_10:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10;
+ break;
+ case SPEED_100:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100;
+ break;
+ case SPEED_1000:
+ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ fe_w32(mdio_cfg, FE_MDIO_CFG);
+
+ netif_carrier_on(priv->netdev);
+ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n",
+ rt2880_speed_str(priv),
+ (priv->phy->duplex[0] == DUPLEX_FULL) ? "Full" : "Half");
+}
+
+static int rt2880_mdio_wait_ready(struct fe_priv *priv)
+{
+ int retries;
+
+ retries = FE_MDIO_RETRY;
+ while (1) {
+ u32 t;
+
+ t = fe_r32(FE_MDIO_ACCESS);
+ if ((t & BIT(31)) == 0)
+ return 0;
+
+ if (retries-- == 0)
+ break;
+
+ udelay(1);
+ }
+
+ dev_err(priv->device, "MDIO operation timed out\n");
+ return -ETIMEDOUT;
+}
+
+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg)
+{
+ struct fe_priv *priv = bus->priv;
+ int err;
+ u32 t;
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return 0xffff;
+
+ t = (phy_addr << 24) | (phy_reg << 16);
+ fe_w32(t, FE_MDIO_ACCESS);
+ t |= BIT(31);
+ fe_w32(t, FE_MDIO_ACCESS);
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return 0xffff;
+
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
+}
+
+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val)
+{
+ struct fe_priv *priv = bus->priv;
+ int err;
+ u32 t;
+
+ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ err = rt2880_mdio_wait_ready(priv);
+ if (err)
+ return err;
+
+ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val;
+ fe_w32(t, FE_MDIO_ACCESS);
+ t |= BIT(31);
+ fe_w32(t, FE_MDIO_ACCESS);
+
+ return rt2880_mdio_wait_ready(priv);
+}
+
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np)
+{
+ const __be32 *id = of_get_property(np, "reg", NULL);
+ const __be32 *link;
+ int size;
+ int phy_mode;
+
+ if (!id || (be32_to_cpu(*id) != 0)) {
+ pr_err("%s: invalid port id\n", np->name);
+ return;
+ }
+
+ priv->phy->phy_fixed[0] = of_get_property(np,
+ "ralink,fixed-link", &size);
+ if (priv->phy->phy_fixed[0] &&
+ (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) {
+ pr_err("%s: invalid fixed link property\n", np->name);
+ priv->phy->phy_fixed[0] = NULL;
+ return;
+ }
+
+ phy_mode = of_get_phy_mode(np);
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ break;
+ default:
+ if (!priv->phy->phy_fixed[0])
+ dev_err(priv->device, "port %d - invalid phy mode\n",
+ priv->phy->speed[0]);
+ break;
+ }
+
+ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0);
+ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0])
+ return;
+
+ if (priv->phy->phy_fixed[0]) {
+ link = priv->phy->phy_fixed[0];
+ priv->phy->speed[0] = be32_to_cpup(link++);
+ priv->phy->duplex[0] = be32_to_cpup(link++);
+ priv->phy->tx_fc[0] = be32_to_cpup(link++);
+ priv->phy->rx_fc[0] = be32_to_cpup(link++);
+
+ priv->link[0] = 1;
+ switch (priv->phy->speed[0]) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ break;
+ case SPEED_1000:
+ break;
+ default:
+ dev_err(priv->device, "invalid link speed: %d\n",
+ priv->phy->speed[0]);
+ priv->phy->phy_fixed[0] = 0;
+ return;
+ }
+ dev_info(priv->device, "using fixed link parameters\n");
+ rt2880_mdio_link_adjust(priv, 0);
+ return;
+ }
+
+ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0])
+ fe_connect_phy_node(priv, priv->phy->phy_node[0]);
+}
diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
new file mode 100644
index 0000000..6884894
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
@@ -0,0 +1,23 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@...nwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@...nwrt.org>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@...il.com>
+ */
+
+#ifndef _RALINK_MDIO_RT2880_H__
+#define _RALINK_MDIO_RT2880_H__
+
+void rt2880_mdio_link_adjust(struct fe_priv *priv, int port);
+int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg);
+int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val);
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+
+#endif
diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
new file mode 100644
index 0000000..eb9b9c2
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt2880.c
@@ -0,0 +1,76 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@...nwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@...nwrt.org>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@...il.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "ralink_soc_eth.h"
+#include "mdio_rt2880.h"
+
+#define RT2880_RESET_FE BIT(18)
+
+static void rt2880_init_data(struct fe_soc_data *data,
+ struct net_device *netdev)
+{
+ struct fe_priv *priv = netdev_priv(netdev);
+
+ priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+ FE_FLAG_JUMBO_FRAME;
+ netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_TX;
+ /* this should work according to the datasheet but actually does not*/
+ /* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
+}
+
+void rt2880_fe_reset(void)
+{
+ fe_reset(RT2880_RESET_FE);
+}
+
+static int rt2880_fwd_config(struct fe_priv *priv)
+{
+ int ret;
+
+ ret = fe_set_clock_cycle(priv);
+ if (ret)
+ return ret;
+
+ fe_fwd_config(priv);
+ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
+ fe_csum_config(priv);
+
+ return ret;
+}
+
+struct fe_soc_data rt2880_data = {
+ .init_data = rt2880_init_data,
+ .reset_fe = rt2880_fe_reset,
+ .fwd_config = rt2880_fwd_config,
+ .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+ .checksum_bit = RX_DMA_L4VALID,
+ .rx_int = FE_RX_DONE_INT,
+ .tx_int = FE_TX_DONE_INT,
+ .status_int = FE_CNT_GDM_AF,
+ .mdio_read = rt2880_mdio_read,
+ .mdio_write = rt2880_mdio_write,
+ .mdio_adjust_link = rt2880_mdio_link_adjust,
+ .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_fe_match[] = {
+ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists