| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 30 Nov 2015 11:34:09 +0100
From: Arnd Bergmann <arnd@...db.de>
To: Karsten Keil <isdn@...ux-pingi.de>,
"David S. Miller" <davem@...emloft.net>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH] isdn: remove spellcaster driver
The 'sc' ISDN driver relies on using readl() to access ISA I/O memory.
This has been deprecated and produced warnings since linux-2.3.23,
disabled by default since 2.4.10 and finally removed in 2.6.5.
I found this because the compiling the driver for ARM produces
a warning:
In file included from ../drivers/isdn/sc/includes.h:8:0,
from ../drivers/isdn/sc/init.c:13:
../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int'
It is pretty clear that this driver has not been used for a long time
and there is no point fixing it now, so let's remove it.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
There has been some discussion about removing all the ISA based ISDN
drivers in the past. I'm not trying to restart that discussion at the
moment, and I did not find the same bug in the other drivers, so
let's just remove this one for now.
drivers/isdn/Makefile | 1 -
drivers/isdn/i4l/Kconfig | 2 -
drivers/isdn/sc/Kconfig | 8 -
drivers/isdn/sc/Makefile | 10 -
drivers/isdn/sc/card.h | 131 ----------
drivers/isdn/sc/command.c | 363 ---------------------------
drivers/isdn/sc/event.c | 68 ------
drivers/isdn/sc/hardware.h | 110 ---------
drivers/isdn/sc/includes.h | 16 --
drivers/isdn/sc/init.c | 549 -----------------------------------------
drivers/isdn/sc/interrupt.c | 247 -------------------
drivers/isdn/sc/ioctl.c | 582 --------------------------------------------
drivers/isdn/sc/message.c | 230 -----------------
drivers/isdn/sc/message.h | 245 -------------------
drivers/isdn/sc/packet.c | 204 ----------------
drivers/isdn/sc/scioc.h | 110 ---------
drivers/isdn/sc/shmem.c | 138 -----------
drivers/isdn/sc/timer.c | 122 ----------
18 files changed, 3136 deletions(-)
diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile
index f1f777570e8e..91c81965e7ca 100644
--- a/drivers/isdn/Makefile
+++ b/drivers/isdn/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_ISDN_DIVERSION) += divert/
obj-$(CONFIG_ISDN_DRV_HISAX) += hisax/
obj-$(CONFIG_ISDN_DRV_ICN) += icn/
obj-$(CONFIG_ISDN_DRV_PCBIT) += pcbit/
-obj-$(CONFIG_ISDN_DRV_SC) += sc/
obj-$(CONFIG_ISDN_DRV_LOOP) += isdnloop/
obj-$(CONFIG_ISDN_DRV_ACT2000) += act2000/
obj-$(CONFIG_HYSDN) += hysdn/
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index 9c6650ea848e..f5b714cd7618 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -130,8 +130,6 @@ source "drivers/isdn/icn/Kconfig"
source "drivers/isdn/pcbit/Kconfig"
-source "drivers/isdn/sc/Kconfig"
-
source "drivers/isdn/act2000/Kconfig"
endmenu
diff --git a/drivers/isdn/sc/Kconfig b/drivers/isdn/sc/Kconfig
deleted file mode 100644
index 7469863a7925..000000000000
--- a/drivers/isdn/sc/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config ISDN_DRV_SC
- tristate "Spellcaster support"
- depends on ISA
- help
- This enables support for the Spellcaster BRI ISDN boards. This
- driver currently builds only in a modularized version.
- To build it, choose M here: the module will be called sc.
- See <file:Documentation/isdn/README.sc> for more information.
diff --git a/drivers/isdn/sc/Makefile b/drivers/isdn/sc/Makefile
deleted file mode 100644
index 0f2b7d602ac0..000000000000
--- a/drivers/isdn/sc/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# Makefile for the sc ISDN device driver
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_SC) += sc.o
-
-# Multipart objects.
-
-sc-y := shmem.o init.o packet.o command.o event.o \
- ioctl.o interrupt.o message.o timer.o
diff --git a/drivers/isdn/sc/card.h b/drivers/isdn/sc/card.h
deleted file mode 100644
index 3da69ee43da7..000000000000
--- a/drivers/isdn/sc/card.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* $Id: card.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Driver parameters for SpellCaster ISA ISDN adapters
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#ifndef CARD_H
-#define CARD_H
-
-/*
- * We need these if they're not already included
- */
-#include <linux/timer.h>
-#include <linux/time.h>
-#include <linux/isdnif.h>
-#include <linux/irqreturn.h>
-#include "message.h"
-#include "scioc.h"
-
-/*
- * Amount of time to wait for a reset to complete
- */
-#define CHECKRESET_TIME msecs_to_jiffies(4000)
-
-/*
- * Amount of time between line status checks
- */
-#define CHECKSTAT_TIME msecs_to_jiffies(8000)
-
-/*
- * The maximum amount of time to wait for a message response
- * to arrive. Use exclusively by send_and_receive
- */
-#define SAR_TIMEOUT msecs_to_jiffies(10000)
-
-/*
- * Macro to determine is a card id is valid
- */
-#define IS_VALID_CARD(x) ((x >= 0) && (x <= cinst))
-
-/*
- * Per channel status and configuration
- */
-typedef struct {
- int l2_proto;
- int l3_proto;
- char dn[50];
- unsigned long first_sendbuf; /* Offset of first send buffer */
- unsigned int num_sendbufs; /* Number of send buffers */
- unsigned int free_sendbufs; /* Number of free sendbufs */
- unsigned int next_sendbuf; /* Next sequential buffer */
- char eazlist[50]; /* Set with SETEAZ */
- char sillist[50]; /* Set with SETSIL */
- int eazclear; /* Don't accept calls if TRUE */
-} bchan;
-
-/*
- * Everything you want to know about the adapter ...
- */
-typedef struct {
- int model;
- int driverId; /* LL Id */
- char devicename[20]; /* The device name */
- isdn_if *card; /* ISDN4Linux structure */
- bchan *channel; /* status of the B channels */
- char nChannels; /* Number of channels */
- unsigned int interrupt; /* Interrupt number */
- int iobase; /* I/O Base address */
- int ioport[MAX_IO_REGS]; /* Index to I/O ports */
- int shmem_pgport; /* port for the exp mem page reg. */
- int shmem_magic; /* adapter magic number */
- unsigned int rambase; /* Shared RAM base address */
- unsigned int ramsize; /* Size of shared memory */
- RspMessage async_msg; /* Async response message */
- int want_async_messages; /* Snoop the Q ? */
- unsigned char seq_no; /* Next send seq. number */
- struct timer_list reset_timer; /* Check reset timer */
- struct timer_list stat_timer; /* Check startproc timer */
- unsigned char nphystat; /* Latest PhyStat info */
- unsigned char phystat; /* Last PhyStat info */
- HWConfig_pl hwconfig; /* Hardware config info */
- char load_ver[11]; /* CommManage Version string */
- char proc_ver[11]; /* CommEngine Version */
- int StartOnReset; /* Indicates startproc after reset */
- int EngineUp; /* Indicates CommEngine Up */
- int trace_mode; /* Indicate if tracing is on */
- spinlock_t lock; /* local lock */
-} board;
-
-
-extern board *sc_adapter[];
-extern int cinst;
-
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n);
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n);
-int get_card_from_id(int driver);
-int indicate_status(int card, int event, ulong Channel, char *Data);
-irqreturn_t interrupt_handler(int interrupt, void *cardptr);
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data);
-void rcvpkt(int card, RspMessage *rcvmsg);
-int command(isdn_ctrl *cmd);
-int reset(int card);
-int startproc(int card);
-int send_and_receive(int card, unsigned int procid, unsigned char type,
- unsigned char class, unsigned char code,
- unsigned char link, unsigned char data_len,
- unsigned char *data, RspMessage *mesgdata, int timeout);
-void flushreadfifo(int card);
-int sendmessage(int card, unsigned int procid, unsigned int type,
- unsigned int class, unsigned int code, unsigned int link,
- unsigned int data_len, unsigned int *data);
-int receivemessage(int card, RspMessage *rspmsg);
-int sc_ioctl(int card, scs_ioctl *data);
-int setup_buffers(int card, int c);
-void sc_check_reset(unsigned long data);
-void check_phystat(unsigned long data);
-
-#endif /* CARD_H */
diff --git a/drivers/isdn/sc/command.c b/drivers/isdn/sc/command.c
deleted file mode 100644
index 4a4e66152ce7..000000000000
--- a/drivers/isdn/sc/command.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/* $Id: command.c,v 1.4.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include <linux/module.h>
-#include "includes.h" /* This must be first */
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include "scioc.h"
-
-static int dial(int card, unsigned long channel, setup_parm setup);
-static int hangup(int card, unsigned long channel);
-static int answer(int card, unsigned long channel);
-static int clreaz(int card, unsigned long channel);
-static int seteaz(int card, unsigned long channel, char *);
-static int setl2(int card, unsigned long arg);
-static int setl3(int card, unsigned long arg);
-static int acceptb(int card, unsigned long channel);
-
-#ifdef DEBUG
-/*
- * Translate command codes to strings
- */
-static char *commands[] = { "ISDN_CMD_IOCTL",
- "ISDN_CMD_DIAL",
- "ISDN_CMD_ACCEPTB",
- "ISDN_CMD_ACCEPTB",
- "ISDN_CMD_HANGUP",
- "ISDN_CMD_CLREAZ",
- "ISDN_CMD_SETEAZ",
- NULL,
- NULL,
- NULL,
- "ISDN_CMD_SETL2",
- NULL,
- "ISDN_CMD_SETL3",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL, };
-
-/*
- * Translates ISDN4Linux protocol codes to strings for debug messages
- */
-static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" };
-static char *l2protos[] = { "ISDN_PROTO_L2_X75I",
- "ISDN_PROTO_L2_X75UI",
- "ISDN_PROTO_L2_X75BUI",
- "ISDN_PROTO_L2_HDLC",
- "ISDN_PROTO_L2_TRANS" };
-#endif
-
-int get_card_from_id(int driver)
-{
- int i;
-
- for (i = 0; i < cinst; i++) {
- if (sc_adapter[i]->driverId == driver)
- return i;
- }
- return -ENODEV;
-}
-
-/*
- * command
- */
-
-int command(isdn_ctrl *cmd)
-{
- int card;
-
- card = get_card_from_id(cmd->driver);
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- /*
- * Dispatch the command
- */
- switch (cmd->command) {
- case ISDN_CMD_IOCTL:
- {
- unsigned long cmdptr;
- scs_ioctl ioc;
-
- memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
- if (copy_from_user(&ioc, (scs_ioctl __user *)cmdptr,
- sizeof(scs_ioctl))) {
- pr_debug("%s: Failed to verify user space 0x%lx\n",
- sc_adapter[card]->devicename, cmdptr);
- return -EFAULT;
- }
- return sc_ioctl(card, &ioc);
- }
- case ISDN_CMD_DIAL:
- return dial(card, cmd->arg, cmd->parm.setup);
- case ISDN_CMD_HANGUP:
- return hangup(card, cmd->arg);
- case ISDN_CMD_ACCEPTD:
- return answer(card, cmd->arg);
- case ISDN_CMD_ACCEPTB:
- return acceptb(card, cmd->arg);
- case ISDN_CMD_CLREAZ:
- return clreaz(card, cmd->arg);
- case ISDN_CMD_SETEAZ:
- return seteaz(card, cmd->arg, cmd->parm.num);
- case ISDN_CMD_SETL2:
- return setl2(card, cmd->arg);
- case ISDN_CMD_SETL3:
- return setl3(card, cmd->arg);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/*
- * start the onboard firmware
- */
-int startproc(int card)
-{
- int status;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- /*
- * send start msg
- */
- status = sendmessage(card, CMPID, cmReqType2,
- cmReqClass0,
- cmReqStartProc,
- 0, 0, NULL);
- pr_debug("%s: Sent startProc\n", sc_adapter[card]->devicename);
-
- return status;
-}
-
-
-/*
- * Dials the number passed in
- */
-static int dial(int card, unsigned long channel, setup_parm setup)
-{
- int status;
- char Phone[48];
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- /*extract ISDN number to dial from eaz/msn string*/
- strcpy(Phone, setup.phone);
-
- /*send the connection message*/
- status = sendmessage(card, CEPID, ceReqTypePhy,
- ceReqClass1,
- ceReqPhyConnect,
- (unsigned char)channel + 1,
- strlen(Phone),
- (unsigned int *)Phone);
-
- pr_debug("%s: Dialing %s on channel %lu\n",
- sc_adapter[card]->devicename, Phone, channel + 1);
-
- return status;
-}
-
-/*
- * Answer an incoming call
- */
-static int answer(int card, unsigned long channel)
-{
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- if (setup_buffers(card, channel + 1)) {
- hangup(card, channel + 1);
- return -ENOBUFS;
- }
-
- indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
- pr_debug("%s: Answered incoming call on channel %lu\n",
- sc_adapter[card]->devicename, channel + 1);
- return 0;
-}
-
-/*
- * Hangup up the call on specified channel
- */
-static int hangup(int card, unsigned long channel)
-{
- int status;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- status = sendmessage(card, CEPID, ceReqTypePhy,
- ceReqClass1,
- ceReqPhyDisconnect,
- (unsigned char)channel + 1,
- 0,
- NULL);
- pr_debug("%s: Sent HANGUP message to channel %lu\n",
- sc_adapter[card]->devicename, channel + 1);
- return status;
-}
-
-/*
- * Set the layer 2 protocol (X.25, HDLC, Raw)
- */
-static int setl2(int card, unsigned long arg)
-{
- int status = 0;
- int protocol, channel;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
- protocol = arg >> 8;
- channel = arg & 0xff;
- sc_adapter[card]->channel[channel].l2_proto = protocol;
-
- /*
- * check that the adapter is also set to the correct protocol
- */
- pr_debug("%s: Sending GetFrameFormat for channel %d\n",
- sc_adapter[card]->devicename, channel + 1);
- status = sendmessage(card, CEPID, ceReqTypeCall,
- ceReqClass0,
- ceReqCallGetFrameFormat,
- (unsigned char)channel + 1,
- 1,
- (unsigned int *)protocol);
- if (status)
- return status;
- return 0;
-}
-
-/*
- * Set the layer 3 protocol
- */
-static int setl3(int card, unsigned long channel)
-{
- int protocol = channel >> 8;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- sc_adapter[card]->channel[channel].l3_proto = protocol;
- return 0;
-}
-
-static int acceptb(int card, unsigned long channel)
-{
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- if (setup_buffers(card, channel + 1))
- {
- hangup(card, channel + 1);
- return -ENOBUFS;
- }
-
- pr_debug("%s: B-Channel connection accepted on channel %lu\n",
- sc_adapter[card]->devicename, channel + 1);
- indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
- return 0;
-}
-
-static int clreaz(int card, unsigned long arg)
-{
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- strcpy(sc_adapter[card]->channel[arg].eazlist, "");
- sc_adapter[card]->channel[arg].eazclear = 1;
- pr_debug("%s: EAZ List cleared for channel %lu\n",
- sc_adapter[card]->devicename, arg + 1);
- return 0;
-}
-
-static int seteaz(int card, unsigned long arg, char *num)
-{
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- strcpy(sc_adapter[card]->channel[arg].eazlist, num);
- sc_adapter[card]->channel[arg].eazclear = 0;
- pr_debug("%s: EAZ list for channel %lu set to: %s\n",
- sc_adapter[card]->devicename, arg + 1,
- sc_adapter[card]->channel[arg].eazlist);
- return 0;
-}
-
-int reset(int card)
-{
- unsigned long flags;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- indicate_status(card, ISDN_STAT_STOP, 0, NULL);
-
- if (sc_adapter[card]->EngineUp) {
- del_timer(&sc_adapter[card]->stat_timer);
- }
-
- sc_adapter[card]->EngineUp = 0;
-
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
- init_timer(&sc_adapter[card]->reset_timer);
- sc_adapter[card]->reset_timer.function = sc_check_reset;
- sc_adapter[card]->reset_timer.data = card;
- sc_adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
- add_timer(&sc_adapter[card]->reset_timer);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
- outb(0x1, sc_adapter[card]->ioport[SFT_RESET]);
-
- pr_debug("%s: Adapter Reset\n", sc_adapter[card]->devicename);
- return 0;
-}
-
-void flushreadfifo(int card)
-{
- while (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA)
- inb(sc_adapter[card]->ioport[FIFO_READ]);
-}
diff --git a/drivers/isdn/sc/event.c b/drivers/isdn/sc/event.c
deleted file mode 100644
index 833d96c2cf92..000000000000
--- a/drivers/isdn/sc/event.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* $Id: event.c,v 1.4.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-#ifdef DEBUG
-static char *events[] = { "ISDN_STAT_STAVAIL",
- "ISDN_STAT_ICALL",
- "ISDN_STAT_RUN",
- "ISDN_STAT_STOP",
- "ISDN_STAT_DCONN",
- "ISDN_STAT_BCONN",
- "ISDN_STAT_DHUP",
- "ISDN_STAT_BHUP",
- "ISDN_STAT_CINF",
- "ISDN_STAT_LOAD",
- "ISDN_STAT_UNLOAD",
- "ISDN_STAT_BSENT",
- "ISDN_STAT_NODCH",
- "ISDN_STAT_ADDCH",
- "ISDN_STAT_CAUSE" };
-#endif
-
-int indicate_status(int card, int event, ulong Channel, char *Data)
-{
- isdn_ctrl cmd;
-
-#ifdef DEBUG
- pr_debug("%s: Indicating event %s on Channel %d\n",
- sc_adapter[card]->devicename, events[event - 256], Channel);
-#endif
- if (Data != NULL) {
- pr_debug("%s: Event data: %s\n", sc_adapter[card]->devicename,
- Data);
- switch (event) {
- case ISDN_STAT_BSENT:
- memcpy(&cmd.parm.length, Data, sizeof(cmd.parm.length));
- break;
- case ISDN_STAT_ICALL:
- memcpy(&cmd.parm.setup, Data, sizeof(cmd.parm.setup));
- break;
- default:
- strlcpy(cmd.parm.num, Data, sizeof(cmd.parm.num));
- }
- }
-
- cmd.command = event;
- cmd.driver = sc_adapter[card]->driverId;
- cmd.arg = Channel;
- return sc_adapter[card]->card->statcallb(&cmd);
-}
diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h
deleted file mode 100644
index 81fbe78701f0..000000000000
--- a/drivers/isdn/sc/hardware.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Hardware specific macros, defines and structures
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef HARDWARE_H
-#define HARDWARE_H
-
-#include <asm/param.h> /* For HZ */
-
-/*
- * General hardware parameters common to all ISA adapters
- */
-
-#define MAX_CARDS 4 /* The maximum number of cards to
- control or probe for. */
-
-#define SIGNATURE 0x87654321 /* Board reset signature */
-#define SIG_OFFSET 0x1004 /* Where to find signature in shared RAM */
-#define TRACE_OFFSET 0x1008 /* Trace enable word offset in shared RAM */
-#define BUFFER_OFFSET 0x1800 /* Beginning of buffers */
-
-/* I/O Port parameters */
-#define IOBASE_MIN 0x180 /* Lowest I/O port address */
-#define IOBASE_MAX 0x3C0 /* Highest I/O port address */
-#define IOBASE_OFFSET 0x20 /* Inter-board I/O port gap used during
- probing */
-#define FIFORD_OFFSET 0x0
-#define FIFOWR_OFFSET 0x400
-#define FIFOSTAT_OFFSET 0x1000
-#define RESET_OFFSET 0x2800
-#define PG0_OFFSET 0x3000 /* Offset from I/O Base for Page 0 register */
-#define PG1_OFFSET 0x3400 /* Offset from I/O Base for Page 1 register */
-#define PG2_OFFSET 0x3800 /* Offset from I/O Base for Page 2 register */
-#define PG3_OFFSET 0x3C00 /* Offset from I/O Base for Page 3 register */
-
-#define FIFO_READ 0 /* FIFO Read register */
-#define FIFO_WRITE 1 /* FIFO Write rgister */
-#define LO_ADDR_PTR 2 /* Extended RAM Low Addr Pointer */
-#define HI_ADDR_PTR 3 /* Extended RAM High Addr Pointer */
-#define NOT_USED_1 4
-#define FIFO_STATUS 5 /* FIFO Status Register */
-#define NOT_USED_2 6
-#define MEM_OFFSET 7
-#define SFT_RESET 10 /* Reset Register */
-#define EXP_BASE 11 /* Shared RAM Base address */
-#define EXP_PAGE0 12 /* Shared RAM Page0 register */
-#define EXP_PAGE1 13 /* Shared RAM Page1 register */
-#define EXP_PAGE2 14 /* Shared RAM Page2 register */
-#define EXP_PAGE3 15 /* Shared RAM Page3 register */
-#define IRQ_SELECT 16 /* IRQ selection register */
-#define MAX_IO_REGS 17 /* Total number of I/O ports */
-
-/* FIFO register values */
-#define RF_HAS_DATA 0x01 /* fifo has data */
-#define RF_QUART_FULL 0x02 /* fifo quarter full */
-#define RF_HALF_FULL 0x04 /* fifo half full */
-#define RF_NOT_FULL 0x08 /* fifo not full */
-#define WF_HAS_DATA 0x10 /* fifo has data */
-#define WF_QUART_FULL 0x20 /* fifo quarter full */
-#define WF_HALF_FULL 0x40 /* fifo half full */
-#define WF_NOT_FULL 0x80 /* fifo not full */
-
-/* Shared RAM parameters */
-#define SRAM_MIN 0xC0000 /* Lowest host shared RAM address */
-#define SRAM_MAX 0xEFFFF /* Highest host shared RAM address */
-#define SRAM_PAGESIZE 0x4000 /* Size of one RAM page (16K) */
-
-/* Shared RAM buffer parameters */
-#define BUFFER_SIZE 0x800 /* The size of a buffer in bytes */
-#define BUFFER_BASE BUFFER_OFFSET /* Offset from start of shared RAM
- where buffer start */
-#define BUFFERS_MAX 16 /* Maximum number of send/receive
- buffers per channel */
-#define HDLC_PROTO 0x01 /* Frame Format for Layer 2 */
-
-#define BRI_BOARD 0
-#define POTS_BOARD 1
-#define PRI_BOARD 2
-
-/*
- * Specific hardware parameters for the DataCommute/BRI
- */
-#define BRI_CHANNELS 2 /* Number of B channels */
-#define BRI_BASEPG_VAL 0x98
-#define BRI_MAGIC 0x60000 /* Magic Number */
-#define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */
-#define BRI_PARTNO "72-029"
-#define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-/*
- * Specific hardware parameters for the DataCommute/PRI
- */
-#define PRI_CHANNELS 23 /* Number of B channels */
-#define PRI_BASEPG_VAL 0x88
-#define PRI_MAGIC 0x20000 /* Magic Number */
-#define PRI_MEMSIZE 0x100000 /* Amount of RAM (1M) */
-#define PRI_PARTNO "72-030"
-#define PRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS;
-
-/*
- * Some handy macros
- */
-
-/* Determine if a channel number is valid for the adapter */
-#define IS_VALID_CHANNEL(y, x) ((x > 0) && (x <= sc_adapter[y]->channels))
-
-#endif
diff --git a/drivers/isdn/sc/includes.h b/drivers/isdn/sc/includes.h
deleted file mode 100644
index 4766e5b77378..000000000000
--- a/drivers/isdn/sc/includes.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/isdnif.h>
diff --git a/drivers/isdn/sc/init.c b/drivers/isdn/sc/init.c
deleted file mode 100644
index 3597ef47b28a..000000000000
--- a/drivers/isdn/sc/init.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include "includes.h"
-#include "hardware.h"
-#include "card.h"
-
-MODULE_DESCRIPTION("ISDN4Linux: Driver for Spellcaster card");
-MODULE_AUTHOR("Spellcaster Telecommunications Inc.");
-MODULE_LICENSE("GPL");
-
-board *sc_adapter[MAX_CARDS];
-int cinst;
-
-static char devname[] = "scX";
-static const char version[] = "2.0b1";
-
-static const char *boardname[] = { "DataCommute/BRI", "DataCommute/PRI", "TeleCommute/BRI" };
-
-/* insmod set parameters */
-static unsigned int io[] = {0, 0, 0, 0};
-static unsigned char irq[] = {0, 0, 0, 0};
-static unsigned long ram[] = {0, 0, 0, 0};
-static bool do_reset;
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, byte, NULL, 0);
-module_param_array(ram, long, NULL, 0);
-module_param(do_reset, bool, 0);
-
-static int identify_board(unsigned long, unsigned int);
-
-static int __init sc_init(void)
-{
- int b = -1;
- int i, j;
- int status = -ENODEV;
-
- unsigned long memsize = 0;
- unsigned long features = 0;
- isdn_if *interface;
- unsigned char channels;
- unsigned char pgport;
- unsigned long magic;
- int model;
- int last_base = IOBASE_MIN;
- int probe_exhasted = 0;
-
-#ifdef MODULE
- pr_info("SpellCaster ISA ISDN Adapter Driver rev. %s Loaded\n", version);
-#else
- pr_info("SpellCaster ISA ISDN Adapter Driver rev. %s\n", version);
-#endif
- pr_info("Copyright (C) 1996 SpellCaster Telecommunications Inc.\n");
-
- while (b++ < MAX_CARDS - 1) {
- pr_debug("Probing for adapter #%d\n", b);
- /*
- * Initialize reusable variables
- */
- model = -1;
- magic = 0;
- channels = 0;
- pgport = 0;
-
- /*
- * See if we should probe for IO base
- */
- pr_debug("I/O Base for board %d is 0x%x, %s probe\n", b, io[b],
- io[b] == 0 ? "will" : "won't");
- if (io[b]) {
- /*
- * No, I/O Base has been provided
- */
- for (i = 0; i < MAX_IO_REGS - 1; i++) {
- if (!request_region(io[b] + i * 0x400, 1, "sc test")) {
- pr_debug("request_region for 0x%x failed\n", io[b] + i * 0x400);
- io[b] = 0;
- break;
- } else
- release_region(io[b] + i * 0x400, 1);
- }
-
- /*
- * Confirm the I/O Address with a test
- */
- if (io[b] == 0) {
- pr_debug("I/O Address invalid.\n");
- continue;
- }
-
- outb(0x18, io[b] + 0x400 * EXP_PAGE0);
- if (inb(io[b] + 0x400 * EXP_PAGE0) != 0x18) {
- pr_debug("I/O Base 0x%x fails test\n",
- io[b] + 0x400 * EXP_PAGE0);
- continue;
- }
- } else {
- /*
- * Yes, probe for I/O Base
- */
- if (probe_exhasted) {
- pr_debug("All probe addresses exhausted, skipping\n");
- continue;
- }
- pr_debug("Probing for I/O...\n");
- for (i = last_base; i <= IOBASE_MAX; i += IOBASE_OFFSET) {
- int found_io = 1;
- if (i == IOBASE_MAX) {
- probe_exhasted = 1; /* No more addresses to probe */
- pr_debug("End of Probes\n");
- }
- last_base = i + IOBASE_OFFSET;
- pr_debug(" checking 0x%x...", i);
- for (j = 0; j < MAX_IO_REGS - 1; j++) {
- if (!request_region(i + j * 0x400, 1, "sc test")) {
- pr_debug("Failed\n");
- found_io = 0;
- break;
- } else
- release_region(i + j * 0x400, 1);
- }
-
- if (found_io) {
- io[b] = i;
- outb(0x18, io[b] + 0x400 * EXP_PAGE0);
- if (inb(io[b] + 0x400 * EXP_PAGE0) != 0x18) {
- pr_debug("Failed by test\n");
- continue;
- }
- pr_debug("Passed\n");
- break;
- }
- }
- if (probe_exhasted) {
- continue;
- }
- }
-
- /*
- * See if we should probe for shared RAM
- */
- if (do_reset) {
- pr_debug("Doing a SAFE probe reset\n");
- outb(0xFF, io[b] + RESET_OFFSET);
- msleep_interruptible(10000);
- }
- pr_debug("RAM Base for board %d is 0x%lx, %s probe\n", b,
- ram[b], ram[b] == 0 ? "will" : "won't");
-
- if (ram[b]) {
- /*
- * No, the RAM base has been provided
- * Just look for a signature and ID the
- * board model
- */
- if (request_region(ram[b], SRAM_PAGESIZE, "sc test")) {
- pr_debug("request_region for RAM base 0x%lx succeeded\n", ram[b]);
- model = identify_board(ram[b], io[b]);
- release_region(ram[b], SRAM_PAGESIZE);
- }
- } else {
- /*
- * Yes, probe for free RAM and look for
- * a signature and id the board model
- */
- for (i = SRAM_MIN; i < SRAM_MAX; i += SRAM_PAGESIZE) {
- pr_debug("Checking RAM address 0x%x...\n", i);
- if (request_region(i, SRAM_PAGESIZE, "sc test")) {
- pr_debug(" request_region succeeded\n");
- model = identify_board(i, io[b]);
- release_region(i, SRAM_PAGESIZE);
- if (model >= 0) {
- pr_debug(" Identified a %s\n",
- boardname[model]);
- ram[b] = i;
- break;
- }
- pr_debug(" Unidentified or inaccessible\n");
- continue;
- }
- pr_debug(" request failed\n");
- }
- }
- /*
- * See if we found free RAM and the board model
- */
- if (!ram[b] || model < 0) {
- /*
- * Nope, there was no place in RAM for the
- * board, or it couldn't be identified
- */
- pr_debug("Failed to find an adapter at 0x%lx\n", ram[b]);
- continue;
- }
-
- /*
- * Set the board's magic number, memory size and page register
- */
- switch (model) {
- case PRI_BOARD:
- channels = 23;
- magic = 0x20000;
- memsize = 0x100000;
- features = PRI_FEATURES;
- break;
-
- case BRI_BOARD:
- case POTS_BOARD:
- channels = 2;
- magic = 0x60000;
- memsize = 0x10000;
- features = BRI_FEATURES;
- break;
- }
- switch (ram[b] >> 12 & 0x0F) {
- case 0x0:
- pr_debug("RAM Page register set to EXP_PAGE0\n");
- pgport = EXP_PAGE0;
- break;
-
- case 0x4:
- pr_debug("RAM Page register set to EXP_PAGE1\n");
- pgport = EXP_PAGE1;
- break;
-
- case 0x8:
- pr_debug("RAM Page register set to EXP_PAGE2\n");
- pgport = EXP_PAGE2;
- break;
-
- case 0xC:
- pr_debug("RAM Page register set to EXP_PAGE3\n");
- pgport = EXP_PAGE3;
- break;
-
- default:
- pr_debug("RAM base address doesn't fall on 16K boundary\n");
- continue;
- }
-
- pr_debug("current IRQ: %d b: %d\n", irq[b], b);
-
- /*
- * Make sure we got an IRQ
- */
- if (!irq[b]) {
- /*
- * No interrupt could be used
- */
- pr_debug("Failed to acquire an IRQ line\n");
- continue;
- }
-
- /*
- * Horray! We found a board, Make sure we can register
- * it with ISDN4Linux
- */
- interface = kzalloc(sizeof(isdn_if), GFP_KERNEL);
- if (interface == NULL) {
- /*
- * Oops, can't malloc isdn_if
- */
- continue;
- }
-
- interface->owner = THIS_MODULE;
- interface->hl_hdrlen = 0;
- interface->channels = channels;
- interface->maxbufsize = BUFFER_SIZE;
- interface->features = features;
- interface->writebuf_skb = sndpkt;
- interface->writecmd = NULL;
- interface->command = command;
- strcpy(interface->id, devname);
- interface->id[2] = '0' + cinst;
-
- /*
- * Allocate the board structure
- */
- sc_adapter[cinst] = kzalloc(sizeof(board), GFP_KERNEL);
- if (sc_adapter[cinst] == NULL) {
- /*
- * Oops, can't alloc memory for the board
- */
- kfree(interface);
- continue;
- }
- spin_lock_init(&sc_adapter[cinst]->lock);
-
- if (!register_isdn(interface)) {
- /*
- * Oops, couldn't register for some reason
- */
- kfree(interface);
- kfree(sc_adapter[cinst]);
- continue;
- }
-
- sc_adapter[cinst]->card = interface;
- sc_adapter[cinst]->driverId = interface->channels;
- strcpy(sc_adapter[cinst]->devicename, interface->id);
- sc_adapter[cinst]->nChannels = channels;
- sc_adapter[cinst]->ramsize = memsize;
- sc_adapter[cinst]->shmem_magic = magic;
- sc_adapter[cinst]->shmem_pgport = pgport;
- sc_adapter[cinst]->StartOnReset = 1;
-
- /*
- * Allocate channels status structures
- */
- sc_adapter[cinst]->channel = kzalloc(sizeof(bchan) * channels, GFP_KERNEL);
- if (sc_adapter[cinst]->channel == NULL) {
- /*
- * Oops, can't alloc memory for the channels
- */
- indicate_status(cinst, ISDN_STAT_UNLOAD, 0, NULL); /* Fix me */
- kfree(interface);
- kfree(sc_adapter[cinst]);
- continue;
- }
-
- /*
- * Lock down the hardware resources
- */
- sc_adapter[cinst]->interrupt = irq[b];
- if (request_irq(sc_adapter[cinst]->interrupt, interrupt_handler,
- 0, interface->id,
- (void *)(unsigned long) cinst)) {
- kfree(sc_adapter[cinst]->channel);
- indicate_status(cinst, ISDN_STAT_UNLOAD, 0, NULL); /* Fix me */
- kfree(interface);
- kfree(sc_adapter[cinst]);
- continue;
-
- }
- sc_adapter[cinst]->iobase = io[b];
- for (i = 0; i < MAX_IO_REGS - 1; i++) {
- sc_adapter[cinst]->ioport[i] = io[b] + i * 0x400;
- request_region(sc_adapter[cinst]->ioport[i], 1,
- interface->id);
- pr_debug("Requesting I/O Port %#x\n",
- sc_adapter[cinst]->ioport[i]);
- }
- sc_adapter[cinst]->ioport[IRQ_SELECT] = io[b] + 0x2;
- request_region(sc_adapter[cinst]->ioport[IRQ_SELECT], 1,
- interface->id);
- pr_debug("Requesting I/O Port %#x\n",
- sc_adapter[cinst]->ioport[IRQ_SELECT]);
- sc_adapter[cinst]->rambase = ram[b];
- request_region(sc_adapter[cinst]->rambase, SRAM_PAGESIZE,
- interface->id);
-
- pr_info(" %s (%d) - %s %d channels IRQ %d, I/O Base 0x%x, RAM Base 0x%lx\n",
- sc_adapter[cinst]->devicename,
- sc_adapter[cinst]->driverId,
- boardname[model], channels, irq[b], io[b], ram[b]);
-
- /*
- * reset the adapter to put things in motion
- */
- reset(cinst);
-
- cinst++;
- status = 0;
- }
- if (status)
- pr_info("Failed to find any adapters, driver unloaded\n");
- return status;
-}
-
-static void __exit sc_exit(void)
-{
- int i, j;
-
- for (i = 0; i < cinst; i++) {
- pr_debug("Cleaning up after adapter %d\n", i);
- /*
- * kill the timers
- */
- del_timer_sync(&(sc_adapter[i]->reset_timer));
- del_timer_sync(&(sc_adapter[i]->stat_timer));
-
- /*
- * Tell I4L we're toast
- */
- indicate_status(i, ISDN_STAT_STOP, 0, NULL);
- indicate_status(i, ISDN_STAT_UNLOAD, 0, NULL);
-
- /*
- * Release shared RAM
- */
- release_region(sc_adapter[i]->rambase, SRAM_PAGESIZE);
-
- /*
- * Release the IRQ
- */
- free_irq(sc_adapter[i]->interrupt, NULL);
-
- /*
- * Reset for a clean start
- */
- outb(0xFF, sc_adapter[i]->ioport[SFT_RESET]);
-
- /*
- * Release the I/O Port regions
- */
- for (j = 0; j < MAX_IO_REGS - 1; j++) {
- release_region(sc_adapter[i]->ioport[j], 1);
- pr_debug("Releasing I/O Port %#x\n",
- sc_adapter[i]->ioport[j]);
- }
- release_region(sc_adapter[i]->ioport[IRQ_SELECT], 1);
- pr_debug("Releasing I/O Port %#x\n",
- sc_adapter[i]->ioport[IRQ_SELECT]);
-
- /*
- * Release any memory we alloced
- */
- kfree(sc_adapter[i]->channel);
- kfree(sc_adapter[i]->card);
- kfree(sc_adapter[i]);
- }
- pr_info("SpellCaster ISA ISDN Adapter Driver Unloaded.\n");
-}
-
-static int identify_board(unsigned long rambase, unsigned int iobase)
-{
- unsigned int pgport;
- unsigned long sig;
- DualPortMemory *dpm;
- RspMessage rcvmsg;
- ReqMessage sndmsg;
- HWConfig_pl hwci;
- int x;
-
- pr_debug("Attempting to identify adapter @ 0x%lx io 0x%x\n",
- rambase, iobase);
-
- /*
- * Enable the base pointer
- */
- outb(rambase >> 12, iobase + 0x2c00);
-
- switch (rambase >> 12 & 0x0F) {
- case 0x0:
- pgport = iobase + PG0_OFFSET;
- pr_debug("Page Register offset is 0x%x\n", PG0_OFFSET);
- break;
-
- case 0x4:
- pgport = iobase + PG1_OFFSET;
- pr_debug("Page Register offset is 0x%x\n", PG1_OFFSET);
- break;
-
- case 0x8:
- pgport = iobase + PG2_OFFSET;
- pr_debug("Page Register offset is 0x%x\n", PG2_OFFSET);
- break;
-
- case 0xC:
- pgport = iobase + PG3_OFFSET;
- pr_debug("Page Register offset is 0x%x\n", PG3_OFFSET);
- break;
- default:
- pr_debug("Invalid rambase 0x%lx\n", rambase);
- return -1;
- }
-
- /*
- * Try to identify a PRI card
- */
- outb(PRI_BASEPG_VAL, pgport);
- msleep_interruptible(1000);
- sig = readl(rambase + SIG_OFFSET);
- pr_debug("Looking for a signature, got 0x%lx\n", sig);
- if (sig == SIGNATURE)
- return PRI_BOARD;
-
- /*
- * Try to identify a PRI card
- */
- outb(BRI_BASEPG_VAL, pgport);
- msleep_interruptible(1000);
- sig = readl(rambase + SIG_OFFSET);
- pr_debug("Looking for a signature, got 0x%lx\n", sig);
- if (sig == SIGNATURE)
- return BRI_BOARD;
-
- return -1;
-
- /*
- * Try to spot a card
- */
- sig = readl(rambase + SIG_OFFSET);
- pr_debug("Looking for a signature, got 0x%lx\n", sig);
- if (sig != SIGNATURE)
- return -1;
-
- dpm = (DualPortMemory *) rambase;
-
- memset(&sndmsg, 0, MSG_LEN);
- sndmsg.msg_byte_cnt = 3;
- sndmsg.type = cmReqType1;
- sndmsg.class = cmReqClass0;
- sndmsg.code = cmReqHWConfig;
- memcpy_toio(&(dpm->req_queue[dpm->req_head++]), &sndmsg, MSG_LEN);
- outb(0, iobase + 0x400);
- pr_debug("Sent HWConfig message\n");
- /*
- * Wait for the response
- */
- x = 0;
- while ((inb(iobase + FIFOSTAT_OFFSET) & RF_HAS_DATA) && x < 100) {
- schedule_timeout_interruptible(1);
- x++;
- }
- if (x == 100) {
- pr_debug("Timeout waiting for response\n");
- return -1;
- }
-
- memcpy_fromio(&rcvmsg, &(dpm->rsp_queue[dpm->rsp_tail]), MSG_LEN);
- pr_debug("Got HWConfig response, status = 0x%x\n", rcvmsg.rsp_status);
- memcpy(&hwci, &(rcvmsg.msg_data.HWCresponse), sizeof(HWConfig_pl));
- pr_debug("Hardware Config: Interface: %s, RAM Size: %ld, Serial: %s\n"
- " Part: %s, Rev: %s\n",
- hwci.st_u_sense ? "S/T" : "U", hwci.ram_size,
- hwci.serial_no, hwci.part_no, hwci.rev_no);
-
- if (!strncmp(PRI_PARTNO, hwci.part_no, 6))
- return PRI_BOARD;
- if (!strncmp(BRI_PARTNO, hwci.part_no, 6))
- return BRI_BOARD;
-
- return -1;
-}
-
-module_init(sc_init);
-module_exit(sc_exit);
diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c
deleted file mode 100644
index e80cc76bc314..000000000000
--- a/drivers/isdn/sc/interrupt.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include <linux/interrupt.h>
-
-/*
- *
- */
-irqreturn_t interrupt_handler(int dummy, void *card_inst)
-{
-
- RspMessage rcvmsg;
- int channel;
- int card = (int)(unsigned long) card_inst;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return IRQ_NONE;
- }
-
- pr_debug("%s: Entered Interrupt handler\n",
- sc_adapter[card]->devicename);
-
- /*
- * Pull all of the waiting messages off the response queue
- */
- while (!receivemessage(card, &rcvmsg)) {
- /*
- * Push the message to the adapter structure for
- * send_and_receive to snoop
- */
- if (sc_adapter[card]->want_async_messages)
- memcpy(&(sc_adapter[card]->async_msg),
- &rcvmsg, sizeof(RspMessage));
-
- channel = (unsigned int) rcvmsg.phy_link_no;
-
- /*
- * Trap Invalid request messages
- */
- if (IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) {
- pr_debug("%s: Invalid request Message, rsp_status = %d\n",
- sc_adapter[card]->devicename,
- rcvmsg.rsp_status);
- break;
- }
-
- /*
- * Check for a linkRead message
- */
- if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read))
- {
- pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n",
- sc_adapter[card]->devicename,
- rcvmsg.msg_data.response.msg_len,
- rcvmsg.msg_data.response.buff_offset);
- rcvpkt(card, &rcvmsg);
- continue;
-
- }
-
- /*
- * Handle a write acknoledgement
- */
- if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) {
- pr_debug("%s: Packet Send ACK on channel %d\n",
- sc_adapter[card]->devicename,
- rcvmsg.phy_link_no);
- sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].free_sendbufs++;
- continue;
- }
-
- /*
- * Handle a connection message
- */
- if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect))
- {
- unsigned int callid;
- setup_parm setup;
- pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n",
- sc_adapter[card]->devicename,
- rcvmsg.phy_link_no,
- rcvmsg.rsp_status,
- rcvmsg.msg_data.byte_array[2]);
-
- memcpy(&callid, rcvmsg.msg_data.byte_array, sizeof(int));
- if (callid >= 0x8000 && callid <= 0xFFFF)
- {
- pr_debug("%s: Got Dial-Out Rsp\n",
- sc_adapter[card]->devicename);
- indicate_status(card, ISDN_STAT_DCONN,
- (unsigned long)rcvmsg.phy_link_no - 1, NULL);
-
- }
- else if (callid >= 0x0000 && callid <= 0x7FFF)
- {
- int len;
-
- pr_debug("%s: Got Incoming Call\n",
- sc_adapter[card]->devicename);
- len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]),
- sizeof(setup.phone));
- if (len >= sizeof(setup.phone))
- continue;
- len = strlcpy(setup.eazmsn,
- sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
- sizeof(setup.eazmsn));
- if (len >= sizeof(setup.eazmsn))
- continue;
- setup.si1 = 7;
- setup.si2 = 0;
- setup.plan = 0;
- setup.screen = 0;
-
- indicate_status(card, ISDN_STAT_ICALL, (unsigned long)rcvmsg.phy_link_no - 1, (char *)&setup);
- indicate_status(card, ISDN_STAT_DCONN, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
- }
- continue;
- }
-
- /*
- * Handle a disconnection message
- */
- if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect))
- {
- pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n",
- sc_adapter[card]->devicename,
- rcvmsg.phy_link_no,
- rcvmsg.rsp_status,
- rcvmsg.msg_data.byte_array[2]);
-
- indicate_status(card, ISDN_STAT_BHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
- indicate_status(card, ISDN_STAT_DHUP, (unsigned long)rcvmsg.phy_link_no - 1, NULL);
- continue;
-
- }
-
- /*
- * Handle a startProc engine up message
- */
- if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) {
- pr_debug("%s: Received EngineUp message\n",
- sc_adapter[card]->devicename);
- sc_adapter[card]->EngineUp = 1;
- sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 1, 0, NULL);
- sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber, 2, 0, NULL);
- init_timer(&sc_adapter[card]->stat_timer);
- sc_adapter[card]->stat_timer.function = check_phystat;
- sc_adapter[card]->stat_timer.data = card;
- sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME;
- add_timer(&sc_adapter[card]->stat_timer);
- continue;
- }
-
- /*
- * Start proc response
- */
- if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) {
- pr_debug("%s: StartProc Response Status %d\n",
- sc_adapter[card]->devicename,
- rcvmsg.rsp_status);
- continue;
- }
-
- /*
- * Handle a GetMyNumber Rsp
- */
- if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetMyNumber)) {
- strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn,
- rcvmsg.msg_data.byte_array,
- sizeof(rcvmsg.msg_data.byte_array));
- continue;
- }
-
- /*
- * PhyStatus response
- */
- if (IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) {
- unsigned int b1stat, b2stat;
-
- /*
- * Covert the message data to the adapter->phystat code
- */
- b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0];
- b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1];
-
- sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */
- pr_debug("%s: PhyStat is 0x%2x\n",
- sc_adapter[card]->devicename,
- sc_adapter[card]->nphystat);
- continue;
- }
-
-
- /*
- * Handle a GetFramFormat
- */
- if (IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) {
- if (rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) {
- unsigned int proto = HDLC_PROTO;
- /*
- * Set board format to HDLC if it wasn't already
- */
- pr_debug("%s: current frame format: 0x%x, will change to HDLC\n",
- sc_adapter[card]->devicename,
- rcvmsg.msg_data.byte_array[0]);
- sendmessage(card, CEPID, ceReqTypeCall,
- ceReqClass0,
- ceReqCallSetFrameFormat,
- (unsigned char)channel + 1,
- 1, &proto);
- }
- continue;
- }
-
- /*
- * Hmm...
- */
- pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n",
- sc_adapter[card]->devicename,
- rcvmsg.type, rcvmsg.class, rcvmsg.code,
- rcvmsg.phy_link_no);
-
- } /* while */
-
- pr_debug("%s: Exiting Interrupt Handler\n",
- sc_adapter[card]->devicename);
- return IRQ_HANDLED;
-}
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
deleted file mode 100644
index e63983aa1d27..000000000000
--- a/drivers/isdn/sc/ioctl.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-#include "scioc.h"
-
-static int GetStatus(int card, boardInfo *);
-
-/*
- * Process private IOCTL messages (typically from scctrl)
- */
-int sc_ioctl(int card, scs_ioctl *data)
-{
- int status;
- RspMessage *rcvmsg;
- char *spid;
- char *dn;
- char switchtype;
- char speed;
-
- rcvmsg = kmalloc(sizeof(RspMessage), GFP_KERNEL);
- if (!rcvmsg)
- return -ENOMEM;
-
- switch (data->command) {
- case SCIOCRESET: /* Perform a hard reset of the adapter */
- {
- pr_debug("%s: SCIOCRESET: ioctl received\n",
- sc_adapter[card]->devicename);
- sc_adapter[card]->StartOnReset = 0;
- kfree(rcvmsg);
- return reset(card);
- }
-
- case SCIOCLOAD:
- {
- char *srec;
-
- srec = kmalloc(SCIOC_SRECSIZE, GFP_KERNEL);
- if (!srec) {
- kfree(rcvmsg);
- return -ENOMEM;
- }
- pr_debug("%s: SCIOLOAD: ioctl received\n",
- sc_adapter[card]->devicename);
- if (sc_adapter[card]->EngineUp) {
- pr_debug("%s: SCIOCLOAD: command failed, LoadProc while engine running.\n",
- sc_adapter[card]->devicename);
- kfree(rcvmsg);
- kfree(srec);
- return -1;
- }
-
- /*
- * Get the SRec from user space
- */
- if (copy_from_user(srec, data->dataptr, SCIOC_SRECSIZE)) {
- kfree(rcvmsg);
- kfree(srec);
- return -EFAULT;
- }
-
- status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,
- 0, SCIOC_SRECSIZE, srec, rcvmsg, SAR_TIMEOUT);
- kfree(rcvmsg);
- kfree(srec);
-
- if (status) {
- pr_debug("%s: SCIOCLOAD: command failed, status = %d\n",
- sc_adapter[card]->devicename, status);
- return -1;
- }
- else {
- pr_debug("%s: SCIOCLOAD: command successful\n",
- sc_adapter[card]->devicename);
- return 0;
- }
- }
-
- case SCIOCSTART:
- {
- kfree(rcvmsg);
- pr_debug("%s: SCIOSTART: ioctl received\n",
- sc_adapter[card]->devicename);
- if (sc_adapter[card]->EngineUp) {
- pr_debug("%s: SCIOCSTART: command failed, engine already running.\n",
- sc_adapter[card]->devicename);
- return -1;
- }
-
- sc_adapter[card]->StartOnReset = 1;
- startproc(card);
- return 0;
- }
-
- case SCIOCSETSWITCH:
- {
- pr_debug("%s: SCIOSETSWITCH: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the switch type from user space
- */
- if (copy_from_user(&switchtype, data->dataptr, sizeof(char))) {
- kfree(rcvmsg);
- return -EFAULT;
- }
-
- pr_debug("%s: SCIOCSETSWITCH: setting switch type to %d\n",
- sc_adapter[card]->devicename,
- switchtype);
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallSetSwitchType,
- 0, sizeof(char), &switchtype, rcvmsg, SAR_TIMEOUT);
- if (!status && !(rcvmsg->rsp_status)) {
- pr_debug("%s: SCIOCSETSWITCH: command successful\n",
- sc_adapter[card]->devicename);
- kfree(rcvmsg);
- return 0;
- }
- else {
- pr_debug("%s: SCIOCSETSWITCH: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- return status;
- }
- }
-
- case SCIOCGETSWITCH:
- {
- pr_debug("%s: SCIOGETSWITCH: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the switch type from the board
- */
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
- ceReqCallGetSwitchType, 0, 0, NULL, rcvmsg, SAR_TIMEOUT);
- if (!status && !(rcvmsg->rsp_status)) {
- pr_debug("%s: SCIOCGETSWITCH: command successful\n",
- sc_adapter[card]->devicename);
- }
- else {
- pr_debug("%s: SCIOCGETSWITCH: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- return status;
- }
-
- switchtype = rcvmsg->msg_data.byte_array[0];
-
- /*
- * Package the switch type and send to user space
- */
- if (copy_to_user(data->dataptr, &switchtype,
- sizeof(char))) {
- kfree(rcvmsg);
- return -EFAULT;
- }
-
- kfree(rcvmsg);
- return 0;
- }
-
- case SCIOCGETSPID:
- {
- pr_debug("%s: SCIOGETSPID: ioctl received\n",
- sc_adapter[card]->devicename);
-
- spid = kzalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
- if (!spid) {
- kfree(rcvmsg);
- return -ENOMEM;
- }
- /*
- * Get the spid from the board
- */
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetSPID,
- data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
- if (!status) {
- pr_debug("%s: SCIOCGETSPID: command successful\n",
- sc_adapter[card]->devicename);
- } else {
- pr_debug("%s: SCIOCGETSPID: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(spid);
- kfree(rcvmsg);
- return status;
- }
- strlcpy(spid, rcvmsg->msg_data.byte_array, SCIOC_SPIDSIZE);
-
- /*
- * Package the switch type and send to user space
- */
- if (copy_to_user(data->dataptr, spid, SCIOC_SPIDSIZE)) {
- kfree(spid);
- kfree(rcvmsg);
- return -EFAULT;
- }
-
- kfree(spid);
- kfree(rcvmsg);
- return 0;
- }
-
- case SCIOCSETSPID:
- {
- pr_debug("%s: DCBIOSETSPID: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the spid from user space
- */
- spid = memdup_user(data->dataptr, SCIOC_SPIDSIZE);
- if (IS_ERR(spid)) {
- kfree(rcvmsg);
- return PTR_ERR(spid);
- }
-
- pr_debug("%s: SCIOCSETSPID: setting channel %d spid to %s\n",
- sc_adapter[card]->devicename, data->channel, spid);
- status = send_and_receive(card, CEPID, ceReqTypeCall,
- ceReqClass0, ceReqCallSetSPID, data->channel,
- strlen(spid), spid, rcvmsg, SAR_TIMEOUT);
- if (!status && !(rcvmsg->rsp_status)) {
- pr_debug("%s: SCIOCSETSPID: command successful\n",
- sc_adapter[card]->devicename);
- kfree(rcvmsg);
- kfree(spid);
- return 0;
- }
- else {
- pr_debug("%s: SCIOCSETSPID: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- kfree(spid);
- return status;
- }
- }
-
- case SCIOCGETDN:
- {
- pr_debug("%s: SCIOGETDN: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the dn from the board
- */
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber,
- data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
- if (!status) {
- pr_debug("%s: SCIOCGETDN: command successful\n",
- sc_adapter[card]->devicename);
- }
- else {
- pr_debug("%s: SCIOCGETDN: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- return status;
- }
-
- dn = kzalloc(SCIOC_DNSIZE, GFP_KERNEL);
- if (!dn) {
- kfree(rcvmsg);
- return -ENOMEM;
- }
- strlcpy(dn, rcvmsg->msg_data.byte_array, SCIOC_DNSIZE);
- kfree(rcvmsg);
-
- /*
- * Package the dn and send to user space
- */
- if (copy_to_user(data->dataptr, dn, SCIOC_DNSIZE)) {
- kfree(dn);
- return -EFAULT;
- }
- kfree(dn);
- return 0;
- }
-
- case SCIOCSETDN:
- {
- pr_debug("%s: SCIOSETDN: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the spid from user space
- */
- dn = memdup_user(data->dataptr, SCIOC_DNSIZE);
- if (IS_ERR(dn)) {
- kfree(rcvmsg);
- return PTR_ERR(dn);
- }
-
- pr_debug("%s: SCIOCSETDN: setting channel %d dn to %s\n",
- sc_adapter[card]->devicename, data->channel, dn);
- status = send_and_receive(card, CEPID, ceReqTypeCall,
- ceReqClass0, ceReqCallSetMyNumber, data->channel,
- strlen(dn), dn, rcvmsg, SAR_TIMEOUT);
- if (!status && !(rcvmsg->rsp_status)) {
- pr_debug("%s: SCIOCSETDN: command successful\n",
- sc_adapter[card]->devicename);
- kfree(rcvmsg);
- kfree(dn);
- return 0;
- }
- else {
- pr_debug("%s: SCIOCSETDN: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- kfree(dn);
- return status;
- }
- }
-
- case SCIOCTRACE:
-
- pr_debug("%s: SCIOTRACE: ioctl received\n",
- sc_adapter[card]->devicename);
-/* sc_adapter[card]->trace = !sc_adapter[card]->trace;
- pr_debug("%s: SCIOCTRACE: tracing turned %s\n",
- sc_adapter[card]->devicename,
- sc_adapter[card]->trace ? "ON" : "OFF"); */
- break;
-
- case SCIOCSTAT:
- {
- boardInfo *bi;
-
- pr_debug("%s: SCIOSTAT: ioctl received\n",
- sc_adapter[card]->devicename);
-
- bi = kzalloc(sizeof(boardInfo), GFP_KERNEL);
- if (!bi) {
- kfree(rcvmsg);
- return -ENOMEM;
- }
-
- kfree(rcvmsg);
- GetStatus(card, bi);
-
- if (copy_to_user(data->dataptr, bi, sizeof(boardInfo))) {
- kfree(bi);
- return -EFAULT;
- }
-
- kfree(bi);
- return 0;
- }
-
- case SCIOCGETSPEED:
- {
- pr_debug("%s: SCIOGETSPEED: ioctl received\n",
- sc_adapter[card]->devicename);
-
- /*
- * Get the speed from the board
- */
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
- ceReqCallGetCallType, data->channel, 0, NULL, rcvmsg, SAR_TIMEOUT);
- if (!status && !(rcvmsg->rsp_status)) {
- pr_debug("%s: SCIOCGETSPEED: command successful\n",
- sc_adapter[card]->devicename);
- }
- else {
- pr_debug("%s: SCIOCGETSPEED: command failed (status = %d)\n",
- sc_adapter[card]->devicename, status);
- kfree(rcvmsg);
- return status;
- }
-
- speed = rcvmsg->msg_data.byte_array[0];
-
- kfree(rcvmsg);
-
- /*
- * Package the switch type and send to user space
- */
-
- if (copy_to_user(data->dataptr, &speed, sizeof(char)))
- return -EFAULT;
-
- return 0;
- }
-
- case SCIOCSETSPEED:
- pr_debug("%s: SCIOCSETSPEED: ioctl received\n",
- sc_adapter[card]->devicename);
- break;
-
- case SCIOCLOOPTST:
- pr_debug("%s: SCIOCLOOPTST: ioctl received\n",
- sc_adapter[card]->devicename);
- break;
-
- default:
- kfree(rcvmsg);
- return -1;
- }
-
- kfree(rcvmsg);
- return 0;
-}
-
-static int GetStatus(int card, boardInfo *bi)
-{
- RspMessage rcvmsg;
- int i, status;
-
- /*
- * Fill in some of the basic info about the board
- */
- bi->modelid = sc_adapter[card]->model;
- strcpy(bi->serial_no, sc_adapter[card]->hwconfig.serial_no);
- strcpy(bi->part_no, sc_adapter[card]->hwconfig.part_no);
- bi->iobase = sc_adapter[card]->iobase;
- bi->rambase = sc_adapter[card]->rambase;
- bi->irq = sc_adapter[card]->interrupt;
- bi->ramsize = sc_adapter[card]->hwconfig.ram_size;
- bi->interface = sc_adapter[card]->hwconfig.st_u_sense;
- strcpy(bi->load_ver, sc_adapter[card]->load_ver);
- strcpy(bi->proc_ver, sc_adapter[card]->proc_ver);
-
- /*
- * Get the current PhyStats and LnkStats
- */
- status = send_and_receive(card, CEPID, ceReqTypePhy, ceReqClass2,
- ceReqPhyStatus, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- if (sc_adapter[card]->model < PRI_BOARD) {
- bi->l1_status = rcvmsg.msg_data.byte_array[2];
- for (i = 0; i < BRI_CHANNELS; i++)
- bi->status.bristats[i].phy_stat =
- rcvmsg.msg_data.byte_array[i];
- }
- else {
- bi->l1_status = rcvmsg.msg_data.byte_array[0];
- bi->l2_status = rcvmsg.msg_data.byte_array[1];
- for (i = 0; i < PRI_CHANNELS; i++)
- bi->status.pristats[i].phy_stat =
- rcvmsg.msg_data.byte_array[i + 2];
- }
- }
-
- /*
- * Get the call types for each channel
- */
- for (i = 0; i < sc_adapter[card]->nChannels; i++) {
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
- ceReqCallGetCallType, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- if (sc_adapter[card]->model == PRI_BOARD) {
- bi->status.pristats[i].call_type =
- rcvmsg.msg_data.byte_array[0];
- }
- else {
- bi->status.bristats[i].call_type =
- rcvmsg.msg_data.byte_array[0];
- }
- }
- }
-
- /*
- * If PRI, get the call states and service states for each channel
- */
- if (sc_adapter[card]->model == PRI_BOARD) {
- /*
- * Get the call states
- */
- status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
- ceReqPhyChCallState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- for (i = 0; i < PRI_CHANNELS; i++)
- bi->status.pristats[i].call_state =
- rcvmsg.msg_data.byte_array[i];
- }
-
- /*
- * Get the service states
- */
- status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
- ceReqPhyChServState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- for (i = 0; i < PRI_CHANNELS; i++)
- bi->status.pristats[i].serv_state =
- rcvmsg.msg_data.byte_array[i];
- }
-
- /*
- * Get the link stats for the channels
- */
- for (i = 1; i <= PRI_CHANNELS; i++) {
- status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
- ceReqLnkGetStats, i, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- bi->status.pristats[i - 1].link_stats.tx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[0];
- bi->status.pristats[i - 1].link_stats.tx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[4];
- bi->status.pristats[i - 1].link_stats.rx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[8];
- bi->status.pristats[i - 1].link_stats.rx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[12];
- }
- }
-
- /*
- * Link stats for the D channel
- */
- status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
- ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
- bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
- bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
- bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
- }
-
- return 0;
- }
-
- /*
- * If BRI or POTS, Get SPID, DN and call types for each channel
- */
-
- /*
- * Get the link stats for the channels
- */
- status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
- ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status) {
- bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
- bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
- bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
- bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
- bi->status.bristats[0].link_stats.tx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[16];
- bi->status.bristats[0].link_stats.tx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[20];
- bi->status.bristats[0].link_stats.rx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[24];
- bi->status.bristats[0].link_stats.rx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[28];
- bi->status.bristats[1].link_stats.tx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[32];
- bi->status.bristats[1].link_stats.tx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[36];
- bi->status.bristats[1].link_stats.rx_good =
- (unsigned long)rcvmsg.msg_data.byte_array[40];
- bi->status.bristats[1].link_stats.rx_bad =
- (unsigned long)rcvmsg.msg_data.byte_array[44];
- }
-
- /*
- * Get the SPIDs
- */
- for (i = 0; i < BRI_CHANNELS; i++) {
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
- ceReqCallGetSPID, i + 1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status)
- strcpy(bi->status.bristats[i].spid, rcvmsg.msg_data.byte_array);
- }
-
- /*
- * Get the DNs
- */
- for (i = 0; i < BRI_CHANNELS; i++) {
- status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
- ceReqCallGetMyNumber, i + 1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
- if (!status)
- strcpy(bi->status.bristats[i].dn, rcvmsg.msg_data.byte_array);
- }
-
- return 0;
-}
diff --git a/drivers/isdn/sc/message.c b/drivers/isdn/sc/message.c
deleted file mode 100644
index 9679a1902b32..000000000000
--- a/drivers/isdn/sc/message.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* $Id: message.c,v 1.5.8.2 2001/09/23 22:24:59 kai Exp $
- *
- * functions for sending and receiving control messages
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-#include <linux/sched.h>
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-/*
- * receive a message from the board
- */
-int receivemessage(int card, RspMessage *rspmsg)
-{
- DualPortMemory *dpm;
- unsigned long flags;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -EINVAL;
- }
-
- pr_debug("%s: Entered receivemessage\n",
- sc_adapter[card]->devicename);
-
- /*
- * See if there are messages waiting
- */
- if (inb(sc_adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
- /*
- * Map in the DPM to the base page and copy the message
- */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
- outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
- sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- dpm = (DualPortMemory *) sc_adapter[card]->rambase;
- memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]),
- MSG_LEN);
- dpm->rsp_tail = (dpm->rsp_tail + 1) % MAX_MESSAGES;
- inb(sc_adapter[card]->ioport[FIFO_READ]);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
- /*
- * Tell the board that the message is received
- */
- pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
- "cnt:%d (type,class,code):(%d,%d,%d) "
- "link:%d stat:0x%x\n",
- sc_adapter[card]->devicename,
- rspmsg->sequence_no,
- rspmsg->process_id,
- rspmsg->time_stamp,
- rspmsg->cmd_sequence_no,
- rspmsg->msg_byte_cnt,
- rspmsg->type,
- rspmsg->class,
- rspmsg->code,
- rspmsg->phy_link_no,
- rspmsg->rsp_status);
-
- return 0;
- }
- return -ENOMSG;
-}
-
-/*
- * send a message to the board
- */
-int sendmessage(int card,
- unsigned int procid,
- unsigned int type,
- unsigned int class,
- unsigned int code,
- unsigned int link,
- unsigned int data_len,
- unsigned int *data)
-{
- DualPortMemory *dpm;
- ReqMessage sndmsg;
- unsigned long flags;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -EINVAL;
- }
-
- /*
- * Make sure we only send CEPID messages when the engine is up
- * and CMPID messages when it is down
- */
- if (sc_adapter[card]->EngineUp && procid == CMPID) {
- pr_debug("%s: Attempt to send CM message with engine up\n",
- sc_adapter[card]->devicename);
- return -ESRCH;
- }
-
- if (!sc_adapter[card]->EngineUp && procid == CEPID) {
- pr_debug("%s: Attempt to send CE message with engine down\n",
- sc_adapter[card]->devicename);
- return -ESRCH;
- }
-
- memset(&sndmsg, 0, MSG_LEN);
- sndmsg.msg_byte_cnt = 4;
- sndmsg.type = type;
- sndmsg.class = class;
- sndmsg.code = code;
- sndmsg.phy_link_no = link;
-
- if (data_len > 0) {
- if (data_len > MSG_DATA_LEN)
- data_len = MSG_DATA_LEN;
- memcpy(&(sndmsg.msg_data), data, data_len);
- sndmsg.msg_byte_cnt = data_len + 8;
- }
-
- sndmsg.process_id = procid;
- sndmsg.sequence_no = sc_adapter[card]->seq_no++ % 256;
-
- /*
- * wait for an empty slot in the queue
- */
- while (!(inb(sc_adapter[card]->ioport[FIFO_STATUS]) & WF_NOT_FULL))
- udelay(1);
-
- /*
- * Disable interrupts and map in shared memory
- */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
- outb((sc_adapter[card]->shmem_magic >> 14) | 0x80,
- sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- dpm = (DualPortMemory *) sc_adapter[card]->rambase; /* Fix me */
- memcpy_toio(&(dpm->req_queue[dpm->req_head]), &sndmsg, MSG_LEN);
- dpm->req_head = (dpm->req_head + 1) % MAX_MESSAGES;
- outb(sndmsg.sequence_no, sc_adapter[card]->ioport[FIFO_WRITE]);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
- pr_debug("%s: Sent Message seq:%d pid:%d time:%d "
- "cnt:%d (type,class,code):(%d,%d,%d) "
- "link:%d\n ",
- sc_adapter[card]->devicename,
- sndmsg.sequence_no,
- sndmsg.process_id,
- sndmsg.time_stamp,
- sndmsg.msg_byte_cnt,
- sndmsg.type,
- sndmsg.class,
- sndmsg.code,
- sndmsg.phy_link_no);
-
- return 0;
-}
-
-int send_and_receive(int card,
- unsigned int procid,
- unsigned char type,
- unsigned char class,
- unsigned char code,
- unsigned char link,
- unsigned char data_len,
- unsigned char *data,
- RspMessage *mesgdata,
- int timeout)
-{
- int retval;
- int tries;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return -EINVAL;
- }
-
- sc_adapter[card]->want_async_messages = 1;
- retval = sendmessage(card, procid, type, class, code, link,
- data_len, (unsigned int *) data);
-
- if (retval) {
- pr_debug("%s: SendMessage failed in SAR\n",
- sc_adapter[card]->devicename);
- sc_adapter[card]->want_async_messages = 0;
- return -EIO;
- }
-
- tries = 0;
- /* wait for the response */
- while (tries < timeout) {
- schedule_timeout_interruptible(1);
-
- pr_debug("SAR waiting..\n");
-
- /*
- * See if we got our message back
- */
- if ((sc_adapter[card]->async_msg.type == type) &&
- (sc_adapter[card]->async_msg.class == class) &&
- (sc_adapter[card]->async_msg.code == code) &&
- (sc_adapter[card]->async_msg.phy_link_no == link)) {
-
- /*
- * Got it!
- */
- pr_debug("%s: Got ASYNC message\n",
- sc_adapter[card]->devicename);
- memcpy(mesgdata, &(sc_adapter[card]->async_msg),
- sizeof(RspMessage));
- sc_adapter[card]->want_async_messages = 0;
- return 0;
- }
-
- tries++;
- }
-
- pr_debug("%s: SAR message timeout\n", sc_adapter[card]->devicename);
- sc_adapter[card]->want_async_messages = 0;
- return -ETIME;
-}
diff --git a/drivers/isdn/sc/message.h b/drivers/isdn/sc/message.h
deleted file mode 100644
index 5e6f4a5c15f8..000000000000
--- a/drivers/isdn/sc/message.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/* $Id: message.h,v 1.1.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * structures, macros and defines useful for sending
- * messages to the adapter
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-/*
- * Board message macros, defines and structures
- */
-
-#ifndef MESSAGE_H
-#define MESSAGE_H
-
-#define MAX_MESSAGES 32 /* Maximum messages that can be
- queued */
-#define MSG_DATA_LEN 48 /* Maximum size of message payload */
-#define MSG_LEN 64 /* Size of a message */
-#define CMPID 0 /* Loader message process ID */
-#define CEPID 64 /* Firmware message process ID */
-
-/*
- * Macro to determine if a message is a loader message
- */
-#define IS_CM_MESSAGE(mesg, tx, cx, dx) \
- ((mesg.type == cmRspType##tx) \
- && (mesg.class == cmRspClass##cx) \
- && (mesg.code == cmRsp##dx))
-
-/*
- * Macro to determine if a message is a firmware message
- */
-#define IS_CE_MESSAGE(mesg, tx, cx, dx) \
- ((mesg.type == ceRspType##tx) \
- && (mesg.class == ceRspClass##cx) \
- && (mesg.code == ceRsp##tx##dx))
-
-/*
- * Loader Request and Response Messages
- */
-
-/* message types */
-#define cmReqType1 1
-#define cmReqType2 2
-#define cmRspType0 0
-#define cmRspType1 1
-#define cmRspType2 2
-#define cmRspType5 5
-
-/* message classes */
-#define cmReqClass0 0
-#define cmRspClass0 0
-
-/* message codes */
-#define cmReqHWConfig 1 /* 1,0,1 */
-#define cmReqMsgLpbk 2 /* 1,0,2 */
-#define cmReqVersion 3 /* 1,0,3 */
-#define cmReqLoadProc 1 /* 2,0,1 */
-#define cmReqStartProc 2 /* 2,0,2 */
-#define cmReqReadMem 6 /* 2,0,6 */
-#define cmRspHWConfig cmReqHWConfig
-#define cmRspMsgLpbk cmReqMsgLpbk
-#define cmRspVersion cmReqVersion
-#define cmRspLoadProc cmReqLoadProc
-#define cmRspStartProc cmReqStartProc
-#define cmRspReadMem cmReqReadMem
-#define cmRspMiscEngineUp 1 /* 5,0,1 */
-#define cmRspInvalid 0 /* 0,0,0 */
-
-
-/*
- * Firmware Request and Response Messages
- */
-
-/* message types */
-#define ceReqTypePhy 1
-#define ceReqTypeLnk 2
-#define ceReqTypeCall 3
-#define ceReqTypeStat 1
-#define ceRspTypeErr 0
-#define ceRspTypePhy ceReqTypePhy
-#define ceRspTypeLnk ceReqTypeLnk
-#define ceRspTypeCall ceReqTypeCall
-#define ceRspTypeStat ceReqTypeStat
-
-/* message classes */
-#define ceReqClass0 0
-#define ceReqClass1 1
-#define ceReqClass2 2
-#define ceReqClass3 3
-#define ceRspClass0 ceReqClass0
-#define ceRspClass1 ceReqClass1
-#define ceRspClass2 ceReqClass2
-#define ceRspClass3 ceReqClass3
-
-/* message codes (B) = BRI only, (P) = PRI only, (V) = POTS only */
-#define ceReqPhyProcInfo 1 /* 1,0,1 */
-#define ceReqPhyConnect 1 /* 1,1,1 */
-#define ceReqPhyDisconnect 2 /* 1,1,2 */
-#define ceReqPhySetParams 3 /* 1,1,3 (P) */
-#define ceReqPhyGetParams 4 /* 1,1,4 (P) */
-#define ceReqPhyStatus 1 /* 1,2,1 */
-#define ceReqPhyAcfaStatus 2 /* 1,2,2 (P) */
-#define ceReqPhyChCallState 3 /* 1,2,3 (P) */
-#define ceReqPhyChServState 4 /* 1,2,4 (P) */
-#define ceReqPhyRLoopBack 1 /* 1,3,1 */
-#define ceRspPhyProcInfo ceReqPhyProcInfo
-#define ceRspPhyConnect ceReqPhyConnect
-#define ceRspPhyDisconnect ceReqPhyDisconnect
-#define ceRspPhySetParams ceReqPhySetParams
-#define ceRspPhyGetParams ceReqPhyGetParams
-#define ceRspPhyStatus ceReqPhyStatus
-#define ceRspPhyAcfaStatus ceReqPhyAcfaStatus
-#define ceRspPhyChCallState ceReqPhyChCallState
-#define ceRspPhyChServState ceReqPhyChServState
-#define ceRspPhyRLoopBack ceReqphyRLoopBack
-#define ceReqLnkSetParam 1 /* 2,0,1 */
-#define ceReqLnkGetParam 2 /* 2,0,2 */
-#define ceReqLnkGetStats 3 /* 2,0,3 */
-#define ceReqLnkWrite 1 /* 2,1,1 */
-#define ceReqLnkRead 2 /* 2,1,2 */
-#define ceReqLnkFlush 3 /* 2,1,3 */
-#define ceReqLnkWrBufTrc 4 /* 2,1,4 */
-#define ceReqLnkRdBufTrc 5 /* 2,1,5 */
-#define ceRspLnkSetParam ceReqLnkSetParam
-#define ceRspLnkGetParam ceReqLnkGetParam
-#define ceRspLnkGetStats ceReqLnkGetStats
-#define ceRspLnkWrite ceReqLnkWrite
-#define ceRspLnkRead ceReqLnkRead
-#define ceRspLnkFlush ceReqLnkFlush
-#define ceRspLnkWrBufTrc ceReqLnkWrBufTrc
-#define ceRspLnkRdBufTrc ceReqLnkRdBufTrc
-#define ceReqCallSetSwitchType 1 /* 3,0,1 */
-#define ceReqCallGetSwitchType 2 /* 3,0,2 */
-#define ceReqCallSetFrameFormat 3 /* 3,0,3 */
-#define ceReqCallGetFrameFormat 4 /* 3,0,4 */
-#define ceReqCallSetCallType 5 /* 3,0,5 */
-#define ceReqCallGetCallType 6 /* 3,0,6 */
-#define ceReqCallSetSPID 7 /* 3,0,7 (!P) */
-#define ceReqCallGetSPID 8 /* 3,0,8 (!P) */
-#define ceReqCallSetMyNumber 9 /* 3,0,9 (!P) */
-#define ceReqCallGetMyNumber 10 /* 3,0,10 (!P) */
-#define ceRspCallSetSwitchType ceReqCallSetSwitchType
-#define ceRspCallGetSwitchType ceReqCallSetSwitchType
-#define ceRspCallSetFrameFormat ceReqCallSetFrameFormat
-#define ceRspCallGetFrameFormat ceReqCallGetFrameFormat
-#define ceRspCallSetCallType ceReqCallSetCallType
-#define ceRspCallGetCallType ceReqCallGetCallType
-#define ceRspCallSetSPID ceReqCallSetSPID
-#define ceRspCallGetSPID ceReqCallGetSPID
-#define ceRspCallSetMyNumber ceReqCallSetMyNumber
-#define ceRspCallGetMyNumber ceReqCallGetMyNumber
-#define ceRspStatAcfaStatus 2
-#define ceRspStat
-#define ceRspErrError 0 /* 0,0,0 */
-
-/*
- * Call Types
- */
-#define CALLTYPE_64K 0
-#define CALLTYPE_56K 1
-#define CALLTYPE_SPEECH 2
-#define CALLTYPE_31KHZ 3
-
-/*
- * Link Level data contains a pointer to and the length of
- * a buffer in shared RAM. Used by LnkRead and LnkWrite message
- * types. Part of RspMsgStruct and ReqMsgStruct.
- */
-typedef struct {
- unsigned long buff_offset;
- unsigned short msg_len;
-} LLData;
-
-
-/*
- * Message payload template for an HWConfig message
- */
-typedef struct {
- char st_u_sense;
- char powr_sense;
- char sply_sense;
- unsigned char asic_id;
- long ram_size;
- char serial_no[13];
- char part_no[13];
- char rev_no[2];
-} HWConfig_pl;
-
-/*
- * A Message
- */
-struct message {
- unsigned char sequence_no;
- unsigned char process_id;
- unsigned char time_stamp;
- unsigned char cmd_sequence_no; /* Rsp messages only */
- unsigned char reserved1[3];
- unsigned char msg_byte_cnt;
- unsigned char type;
- unsigned char class;
- unsigned char code;
- unsigned char phy_link_no;
- unsigned char rsp_status; /* Rsp messages only */
- unsigned char reseved2[3];
- union {
- unsigned char byte_array[MSG_DATA_LEN];
- LLData response;
- HWConfig_pl HWCresponse;
- } msg_data;
-};
-
-typedef struct message ReqMessage; /* Request message */
-typedef struct message RspMessage; /* Response message */
-
-/*
- * The first 5010 bytes of shared memory contain the message queues,
- * indexes and other data. This structure is its template
- */
-typedef struct {
- volatile ReqMessage req_queue[MAX_MESSAGES];
- volatile RspMessage rsp_queue[MAX_MESSAGES];
- volatile unsigned char req_head;
- volatile unsigned char req_tail;
- volatile unsigned char rsp_head;
- volatile unsigned char rsp_tail;
- volatile unsigned long signature;
- volatile unsigned long trace_enable;
- volatile unsigned char reserved[4];
-} DualPortMemory;
-
-#endif
diff --git a/drivers/isdn/sc/packet.c b/drivers/isdn/sc/packet.c
deleted file mode 100644
index 2446957085e0..000000000000
--- a/drivers/isdn/sc/packet.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/* $Id: packet.c,v 1.5.8.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-int sndpkt(int devId, int channel, int ack, struct sk_buff *data)
-{
- LLData ReqLnkWrite;
- int status;
- int card;
- unsigned long len;
-
- card = get_card_from_id(devId);
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- pr_debug("%s: sndpkt: frst = 0x%lx nxt = %d f = %d n = %d\n",
- sc_adapter[card]->devicename,
- sc_adapter[card]->channel[channel].first_sendbuf,
- sc_adapter[card]->channel[channel].next_sendbuf,
- sc_adapter[card]->channel[channel].free_sendbufs,
- sc_adapter[card]->channel[channel].num_sendbufs);
-
- if (!sc_adapter[card]->channel[channel].free_sendbufs) {
- pr_debug("%s: out of TX buffers\n",
- sc_adapter[card]->devicename);
- return -EINVAL;
- }
-
- if (data->len > BUFFER_SIZE) {
- pr_debug("%s: data overflows buffer size (data > buffer)\n",
- sc_adapter[card]->devicename);
- return -EINVAL;
- }
-
- ReqLnkWrite.buff_offset = sc_adapter[card]->channel[channel].next_sendbuf *
- BUFFER_SIZE + sc_adapter[card]->channel[channel].first_sendbuf;
- ReqLnkWrite.msg_len = data->len; /* sk_buff size */
- pr_debug("%s: writing %d bytes to buffer offset 0x%lx\n",
- sc_adapter[card]->devicename,
- ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset);
- memcpy_toshmem(card, (char *)ReqLnkWrite.buff_offset, data->data, ReqLnkWrite.msg_len);
-
- /*
- * sendmessage
- */
- pr_debug("%s: sndpkt size=%d, buf_offset=0x%lx buf_indx=%d\n",
- sc_adapter[card]->devicename,
- ReqLnkWrite.msg_len, ReqLnkWrite.buff_offset,
- sc_adapter[card]->channel[channel].next_sendbuf);
-
- status = sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkWrite,
- channel + 1, sizeof(LLData), (unsigned int *)&ReqLnkWrite);
- len = data->len;
- if (status) {
- pr_debug("%s: failed to send packet, status = %d\n",
- sc_adapter[card]->devicename, status);
- return -1;
- }
- else {
- sc_adapter[card]->channel[channel].free_sendbufs--;
- sc_adapter[card]->channel[channel].next_sendbuf =
- ++sc_adapter[card]->channel[channel].next_sendbuf ==
- sc_adapter[card]->channel[channel].num_sendbufs ? 0 :
- sc_adapter[card]->channel[channel].next_sendbuf;
- pr_debug("%s: packet sent successfully\n", sc_adapter[card]->devicename);
- dev_kfree_skb(data);
- indicate_status(card, ISDN_STAT_BSENT, channel, (char *)&len);
- }
- return len;
-}
-
-void rcvpkt(int card, RspMessage *rcvmsg)
-{
- LLData newll;
- struct sk_buff *skb;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("invalid param: %d is not a valid card id\n", card);
- return;
- }
-
- switch (rcvmsg->rsp_status) {
- case 0x01:
- case 0x02:
- case 0x70:
- pr_debug("%s: error status code: 0x%x\n",
- sc_adapter[card]->devicename, rcvmsg->rsp_status);
- return;
- case 0x00:
- if (!(skb = dev_alloc_skb(rcvmsg->msg_data.response.msg_len))) {
- printk(KERN_WARNING "%s: rcvpkt out of memory, dropping packet\n",
- sc_adapter[card]->devicename);
- return;
- }
- skb_put(skb, rcvmsg->msg_data.response.msg_len);
- pr_debug("%s: getting data from offset: 0x%lx\n",
- sc_adapter[card]->devicename,
- rcvmsg->msg_data.response.buff_offset);
- memcpy_fromshmem(card,
- skb_put(skb, rcvmsg->msg_data.response.msg_len),
- (char *)rcvmsg->msg_data.response.buff_offset,
- rcvmsg->msg_data.response.msg_len);
- sc_adapter[card]->card->rcvcallb_skb(sc_adapter[card]->driverId,
- rcvmsg->phy_link_no - 1, skb);
-
- case 0x03:
- /*
- * Recycle the buffer
- */
- pr_debug("%s: buffer size : %d\n",
- sc_adapter[card]->devicename, BUFFER_SIZE);
-/* memset_shmem(card, rcvmsg->msg_data.response.buff_offset, 0, BUFFER_SIZE); */
- newll.buff_offset = rcvmsg->msg_data.response.buff_offset;
- newll.msg_len = BUFFER_SIZE;
- pr_debug("%s: recycled buffer at offset 0x%lx size %d\n",
- sc_adapter[card]->devicename,
- newll.buff_offset, newll.msg_len);
- sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
- rcvmsg->phy_link_no, sizeof(LLData), (unsigned int *)&newll);
- }
-
-}
-
-int setup_buffers(int card, int c)
-{
- unsigned int nBuffers, i, cBase;
- unsigned int buffer_size;
- LLData RcvBuffOffset;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("invalid param: %d is not a valid card id\n", card);
- return -ENODEV;
- }
-
- /*
- * Calculate the buffer offsets (send/recv/send/recv)
- */
- pr_debug("%s: setting up channel buffer space in shared RAM\n",
- sc_adapter[card]->devicename);
- buffer_size = BUFFER_SIZE;
- nBuffers = ((sc_adapter[card]->ramsize - BUFFER_BASE) / buffer_size) / 2;
- nBuffers = nBuffers > BUFFERS_MAX ? BUFFERS_MAX : nBuffers;
- pr_debug("%s: calculating buffer space: %d buffers, %d big\n",
- sc_adapter[card]->devicename,
- nBuffers, buffer_size);
- if (nBuffers < 2) {
- pr_debug("%s: not enough buffer space\n",
- sc_adapter[card]->devicename);
- return -1;
- }
- cBase = (nBuffers * buffer_size) * (c - 1);
- pr_debug("%s: channel buffer offset from shared RAM: 0x%x\n",
- sc_adapter[card]->devicename, cBase);
- sc_adapter[card]->channel[c - 1].first_sendbuf = BUFFER_BASE + cBase;
- sc_adapter[card]->channel[c - 1].num_sendbufs = nBuffers / 2;
- sc_adapter[card]->channel[c - 1].free_sendbufs = nBuffers / 2;
- sc_adapter[card]->channel[c - 1].next_sendbuf = 0;
- pr_debug("%s: send buffer setup complete: first=0x%lx n=%d f=%d, nxt=%d\n",
- sc_adapter[card]->devicename,
- sc_adapter[card]->channel[c - 1].first_sendbuf,
- sc_adapter[card]->channel[c - 1].num_sendbufs,
- sc_adapter[card]->channel[c - 1].free_sendbufs,
- sc_adapter[card]->channel[c - 1].next_sendbuf);
-
- /*
- * Prep the receive buffers
- */
- pr_debug("%s: adding %d RecvBuffers:\n",
- sc_adapter[card]->devicename, nBuffers / 2);
- for (i = 0; i < nBuffers / 2; i++) {
- RcvBuffOffset.buff_offset =
- ((sc_adapter[card]->channel[c - 1].first_sendbuf +
- (nBuffers / 2) * buffer_size) + (buffer_size * i));
- RcvBuffOffset.msg_len = buffer_size;
- pr_debug("%s: adding RcvBuffer #%d offset=0x%lx sz=%d bufsz:%d\n",
- sc_adapter[card]->devicename,
- i + 1, RcvBuffOffset.buff_offset,
- RcvBuffOffset.msg_len, buffer_size);
- sendmessage(card, CEPID, ceReqTypeLnk, ceReqClass1, ceReqLnkRead,
- c, sizeof(LLData), (unsigned int *)&RcvBuffOffset);
- }
- return 0;
-}
diff --git a/drivers/isdn/sc/scioc.h b/drivers/isdn/sc/scioc.h
deleted file mode 100644
index a50e143779e7..000000000000
--- a/drivers/isdn/sc/scioc.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef __ISDN_SC_SCIOC_H__
-#define __ISDN_SC_SCIOC_H__
-
-/*
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- */
-
-/*
- * IOCTL Command Codes
- */
-#define SCIOCLOAD 0x01 /* Load a firmware record */
-#define SCIOCRESET 0x02 /* Perform hard reset */
-#define SCIOCDEBUG 0x03 /* Set debug level */
-#define SCIOCREV 0x04 /* Get driver revision(s) */
-#define SCIOCSTART 0x05 /* Start the firmware */
-#define SCIOCGETSWITCH 0x06 /* Get switch type */
-#define SCIOCSETSWITCH 0x07 /* Set switch type */
-#define SCIOCGETSPID 0x08 /* Get channel SPID */
-#define SCIOCSETSPID 0x09 /* Set channel SPID */
-#define SCIOCGETDN 0x0A /* Get channel DN */
-#define SCIOCSETDN 0x0B /* Set channel DN */
-#define SCIOCTRACE 0x0C /* Toggle trace mode */
-#define SCIOCSTAT 0x0D /* Get line status */
-#define SCIOCGETSPEED 0x0E /* Set channel speed */
-#define SCIOCSETSPEED 0x0F /* Set channel speed */
-#define SCIOCLOOPTST 0x10 /* Perform loopback test */
-
-typedef struct {
- int device;
- int channel;
- unsigned long command;
- void __user *dataptr;
-} scs_ioctl;
-
-/* Size of strings */
-#define SCIOC_SPIDSIZE 49
-#define SCIOC_DNSIZE SCIOC_SPIDSIZE
-#define SCIOC_REVSIZE SCIOC_SPIDSIZE
-#define SCIOC_SRECSIZE 49
-
-typedef struct {
- unsigned long tx_good;
- unsigned long tx_bad;
- unsigned long rx_good;
- unsigned long rx_bad;
-} ChLinkStats;
-
-typedef struct {
- char spid[49];
- char dn[49];
- char call_type;
- char phy_stat;
- ChLinkStats link_stats;
-} BRIStat;
-
-typedef BRIStat POTStat;
-
-typedef struct {
- char call_type;
- char call_state;
- char serv_state;
- char phy_stat;
- ChLinkStats link_stats;
-} PRIStat;
-
-typedef char PRIInfo;
-typedef char BRIInfo;
-typedef char POTInfo;
-
-
-typedef struct {
- char acfa_nos;
- char acfa_ais;
- char acfa_los;
- char acfa_rra;
- char acfa_slpp;
- char acfa_slpn;
- char acfa_fsrf;
-} ACFAStat;
-
-typedef struct {
- unsigned char modelid;
- char serial_no[13];
- char part_no[13];
- char load_ver[11];
- char proc_ver[11];
- int iobase;
- long rambase;
- char irq;
- long ramsize;
- char interface;
- char switch_type;
- char l1_status;
- char l2_status;
- ChLinkStats dch_stats;
- ACFAStat AcfaStats;
- union {
- PRIStat pristats[23];
- BRIStat bristats[2];
- POTStat potsstats[2];
- } status;
- union {
- PRIInfo priinfo;
- BRIInfo briinfo;
- POTInfo potsinfo;
- } info;
-} boardInfo;
-
-#endif /* __ISDN_SC_SCIOC_H__ */
diff --git a/drivers/isdn/sc/shmem.c b/drivers/isdn/sc/shmem.c
deleted file mode 100644
index d24506ceb6e8..000000000000
--- a/drivers/isdn/sc/shmem.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/* $Id: shmem.c,v 1.2.10.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * Card functions implementing ISDN4Linux functionality
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h" /* This must be first */
-#include "hardware.h"
-#include "card.h"
-
-/*
- *
- */
-void memcpy_toshmem(int card, void *dest, const void *src, size_t n)
-{
- unsigned long flags;
- unsigned char ch;
- unsigned long dest_rem = ((unsigned long) dest) % 0x4000;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return;
- }
-
- if (n > SRAM_PAGESIZE)
- return;
-
- /*
- * determine the page to load from the address
- */
- ch = (unsigned long) dest / SRAM_PAGESIZE;
- pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
- /*
- * Block interrupts and load the page
- */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
- outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
- sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- memcpy_toio((void __iomem *)(sc_adapter[card]->rambase + dest_rem), src, n);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
- pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
- ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
- pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
- sc_adapter[card]->devicename, n,
- (unsigned long) src,
- sc_adapter[card]->rambase + ((unsigned long) dest % 0x4000));
-}
-
-/*
- * Reverse of above
- */
-void memcpy_fromshmem(int card, void *dest, const void *src, size_t n)
-{
- unsigned long flags;
- unsigned char ch;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return;
- }
-
- if (n > SRAM_PAGESIZE) {
- return;
- }
-
- /*
- * determine the page to load from the address
- */
- ch = (unsigned long) src / SRAM_PAGESIZE;
- pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
-
- /*
- * Block interrupts and load the page
- */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
- outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
- sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- memcpy_fromio(dest, (void *)(sc_adapter[card]->rambase +
- ((unsigned long) src % 0x4000)), n);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
- pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
- ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
-/* pr_debug("%s: copying %d bytes from %#x to %#x\n",
- sc_adapter[card]->devicename, n,
- sc_adapter[card]->rambase + ((unsigned long) src %0x4000), (unsigned long) dest); */
-}
-
-#if 0
-void memset_shmem(int card, void *dest, int c, size_t n)
-{
- unsigned long flags;
- unsigned char ch;
-
- if (!IS_VALID_CARD(card)) {
- pr_debug("Invalid param: %d is not a valid card id\n", card);
- return;
- }
-
- if (n > SRAM_PAGESIZE) {
- return;
- }
-
- /*
- * determine the page to load from the address
- */
- ch = (unsigned long) dest / SRAM_PAGESIZE;
- pr_debug("%s: loaded page %d\n", sc_adapter[card]->devicename, ch);
-
- /*
- * Block interrupts and load the page
- */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
-
- outb(((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80,
- sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport]);
- memset_io(sc_adapter[card]->rambase +
- ((unsigned long) dest % 0x4000), c, n);
- pr_debug("%s: set page to %#x\n", sc_adapter[card]->devicename,
- ((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE) >> 14) | 0x80);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-}
-#endif /* 0 */
diff --git a/drivers/isdn/sc/timer.c b/drivers/isdn/sc/timer.c
deleted file mode 100644
index 6fbac2230d7e..000000000000
--- a/drivers/isdn/sc/timer.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* $Id: timer.c,v 1.3.6.1 2001/09/23 22:24:59 kai Exp $
- *
- * Copyright (C) 1996 SpellCaster Telecommunications Inc.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * For more information, please contact gpl-info@...llcast.com or write:
- *
- * SpellCaster Telecommunications Inc.
- * 5621 Finch Avenue East, Unit #3
- * Scarborough, Ontario Canada
- * M1B 2T9
- * +1 (416) 297-8565
- * +1 (416) 297-6433 Facsimile
- */
-
-#include "includes.h"
-#include "hardware.h"
-#include "message.h"
-#include "card.h"
-
-
-/*
- * Write the proper values into the I/O ports following a reset
- */
-static void setup_ports(int card)
-{
-
- outb((sc_adapter[card]->rambase >> 12), sc_adapter[card]->ioport[EXP_BASE]);
-
- /* And the IRQ */
- outb((sc_adapter[card]->interrupt | 0x80),
- sc_adapter[card]->ioport[IRQ_SELECT]);
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Setup the ioports for the board that were cleared by the reset.
- * Then, check to see if the signate has been set. Next, set the
- * signature to a known value and issue a startproc if needed.
- */
-void sc_check_reset(unsigned long data)
-{
- unsigned long flags;
- unsigned long sig;
- int card = (unsigned int) data;
-
- pr_debug("%s: check_timer timer called\n",
- sc_adapter[card]->devicename);
-
- /* Setup the io ports */
- setup_ports(card);
-
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
- outb(sc_adapter[card]->ioport[sc_adapter[card]->shmem_pgport],
- (sc_adapter[card]->shmem_magic >> 14) | 0x80);
- sig = (unsigned long) *((unsigned long *)(sc_adapter[card]->rambase + SIG_OFFSET));
-
- /* check the signature */
- if (sig == SIGNATURE) {
- flushreadfifo(card);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
- /* See if we need to do a startproc */
- if (sc_adapter[card]->StartOnReset)
- startproc(card);
- } else {
- pr_debug("%s: No signature yet, waiting another %lu jiffies.\n",
- sc_adapter[card]->devicename, CHECKRESET_TIME);
- mod_timer(&sc_adapter[card]->reset_timer, jiffies + CHECKRESET_TIME);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
- }
-}
-
-/*
- * Timed function to check the status of a previous reset
- * Must be very fast as this function runs in the context of
- * an interrupt handler.
- *
- * Send check sc_adapter->phystat to see if the channels are up
- * If they are, tell ISDN4Linux that the board is up. If not,
- * tell IADN4Linux that it is up. Always reset the timer to
- * fire again (endless loop).
- */
-void check_phystat(unsigned long data)
-{
- unsigned long flags;
- int card = (unsigned int) data;
-
- pr_debug("%s: Checking status...\n", sc_adapter[card]->devicename);
- /*
- * check the results of the last PhyStat and change only if
- * has changed drastically
- */
- if (sc_adapter[card]->nphystat && !sc_adapter[card]->phystat) { /* All is well */
- pr_debug("PhyStat transition to RUN\n");
- pr_info("%s: Switch contacted, transmitter enabled\n",
- sc_adapter[card]->devicename);
- indicate_status(card, ISDN_STAT_RUN, 0, NULL);
- }
- else if (!sc_adapter[card]->nphystat && sc_adapter[card]->phystat) { /* All is not well */
- pr_debug("PhyStat transition to STOP\n");
- pr_info("%s: Switch connection lost, transmitter disabled\n",
- sc_adapter[card]->devicename);
-
- indicate_status(card, ISDN_STAT_STOP, 0, NULL);
- }
-
- sc_adapter[card]->phystat = sc_adapter[card]->nphystat;
-
- /* Reinitialize the timer */
- spin_lock_irqsave(&sc_adapter[card]->lock, flags);
- mod_timer(&sc_adapter[card]->stat_timer, jiffies + CHECKSTAT_TIME);
- spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
-
- /* Send a new cePhyStatus message */
- sendmessage(card, CEPID, ceReqTypePhy, ceReqClass2,
- ceReqPhyStatus, 0, 0, NULL);
-}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists