| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Dec 2015 20:35:11 +0300
From: Stas Sergeev <stsp@...t.ru>
To: netdev <netdev@...r.kernel.org>
Cc: Linux kernel <linux-kernel@...r.kernel.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Russell King - ARM Linux <linux@....linux.org.uk>
Subject: [PATCH 2/2] mvneta: implement ethtool autonegotiation control
This patch allows to do
ethtool -s eth0 autoneg off
ethtool -s eth0 autoneg on
to disable or enable autonegotiation at run-time.
Without that functionality, the only way to control the autonegotiation
is to modify the device tree.
This is needed if you plan to use the same kernel with
different ethernet switches, the ones that support the in-band
status and the ones that not.
CC: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
CC: netdev@...r.kernel.org
CC: linux-kernel@...r.kernel.org
Signed-off-by: Stas Sergeev <stsp@...rs.sourceforge.net>
---
drivers/net/ethernet/marvell/mvneta.c | 109 +++++++++++++++++++++++-----------
1 file changed, 74 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 8e0e6de..d0e1ec5 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -369,7 +369,7 @@ struct mvneta_port {
unsigned int duplex;
unsigned int speed;
unsigned int tx_csum_limit;
- int use_inband_status:1;
+ unsigned int use_inband_status:1;
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
};
@@ -971,6 +971,44 @@ static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue)
mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
}
+static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
+{
+ u32 val;
+
+ if (enable) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
+ MVNETA_GMAC_FORCE_LINK_DOWN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN);
+ val |= MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ } else {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
+
+ val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+ val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+ }
+}
+
/* This method sets defaults to the NETA port:
* Clears interrupt Cause and Mask registers.
* Clears all MAC tables.
@@ -1056,39 +1094,7 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
- if (pp->use_inband_status) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN);
- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- } else {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
- }
-
+ mvneta_set_autoneg(pp, pp->use_inband_status);
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
@@ -2950,10 +2956,43 @@ int mvneta_ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct mvneta_port *pp = netdev_priv(dev);
+ struct phy_device *phydev = pp->phy_dev;
- if (!pp->phy_dev)
+ if (!phydev)
return -ENODEV;
+ if ((cmd->autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
+ u32 val;
+
+ mvneta_set_autoneg(pp, cmd->autoneg == AUTONEG_ENABLE);
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX);
+
+ if (phydev->duplex)
+ val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ if (phydev->speed == SPEED_1000)
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+ else if (phydev->speed == SPEED_100)
+ val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ pp->use_inband_status = (cmd->autoneg == AUTONEG_ENABLE);
+ netdev_info(pp->dev, "autoneg status set to %i\n",
+ pp->use_inband_status);
+
+ if (netif_running(dev)) {
+ mvneta_port_down(pp);
+ mvneta_port_up(pp);
+ }
+ }
+
return phy_ethtool_sset(pp->phy_dev, cmd);
}
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists