lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1449242950-19291-1-git-send-email-stefan.wahren@i2se.com>
Date:	Fri,  4 Dec 2015 16:29:10 +0100
From:	Stefan Wahren <stefan.wahren@...e.com>
To:	"David S. Miller" <davem@...emloft.net>
Cc:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Stefan Wahren <stefan.wahren@...e.com>,
	<stable@...r.kernel.org>
Subject: [PATCH] net: qca_spi: fix transmit queue timeout handling

In case of a tx queue timeout every transmit is blocked until the
QCA7000 resets himself and triggers a sync which makes the driver
flushs the tx ring. So avoid this blocking situation by triggering
the sync immediately after the timeout. Waking the queue doesn't
make sense in this situation.

Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
Cc: <stable@...r.kernel.org> # v3.18+
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")

---
 drivers/net/ethernet/qualcomm/qca_spi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index ddb2c6c..689a4a5 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -736,9 +736,8 @@ qcaspi_netdev_tx_timeout(struct net_device *dev)
 	netdev_info(qca->net_dev, "Transmit timeout at %ld, latency %ld\n",
 		    jiffies, jiffies - dev->trans_start);
 	qca->net_dev->stats.tx_errors++;
-	/* wake the queue if there is room */
-	if (qcaspi_tx_ring_has_space(&qca->txr))
-		netif_wake_queue(dev);
+	/* Trigger tx queue flush and QCA7000 reset */
+	qca->sync = QCASPI_SYNC_UNKNOWN;
 }
 
 static int
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ