lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 4 Dec 2015 11:24:07 -0500
From:	Sowmini Varadhan <sowmini.varadhan@...cle.com>
To:	sowmini.varadhan@...cle.com, intel-wired-lan@...ts.osuosl.org,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	jeffrey.t.kirsher@...el.com, jesse.brandeburg@...el.com,
	shannon.nelson@...el.com, carolyn.wyborny@...el.com,
	donald.c.skidmore@...el.com, matthew.vick@...el.com,
	john.ronciak@...el.com, mitch.a.williams@...el.com,
	andy.shevchenko@...il.com
Subject: [PATCH RESEND v7] i40e: Look up MAC address in Open Firmware or
 IDPROM


[Apologies for fat-fingering subject in the other attempt]

This is the i40e equivalent of commit c762dff24c06 ("ixgbe: Look up MAC
address in Open Firmware or IDPROM").

As with that fix, attempt to look up the MAC address in Open Firmware
on systems that support it, and use IDPROM on SPARC if no OF address
is found.

In the case of the i40e there is an assumption that the default mac
address has already been set up as the primary mac filter on probe,
so if this filter is obtained from the Open Firmware or IDPROM, an
explicit write is needed via i40e_aq_mac_address_write() and
i40e_aq_add_macvlan() invocation.

The is_default_mac field in the platform-private i40e_pf structure
tracks whether the mac address was default or not, and in the latter
case, will trigger the calls to i40e_aq_mac_address_write() and
i40e_aq_add_macvlan().

Reviewed-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@...cle.com>
---
v2, v3: Andy Shevchenko comments
v4: Shannon Nelson review: explicitly set up mac filters before register_netdev
v5: Shannon Nelson code style comments
v6: Shannon Nelson code style comments
v7: Ensure that i40e_macaddr_init() is called only for VSI_MAIN, and only
    if the mac address is not the default. Some additional code-refactoring
    based on comments from Shannon Nelson

 drivers/net/ethernet/intel/i40e/i40e.h      |    2 +
 drivers/net/ethernet/intel/i40e/i40e_main.c |   87 +++++++++++++++++++++++++++
 2 files changed, 89 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 0b9537b..6d41757 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -420,6 +420,8 @@ struct i40e_pf {
 
 	u32 ioremap_len;
 	u32 fd_inv;
+
+	u32 is_default_mac:1;
 };
 
 struct i40e_mac_filter {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9e6268b..40a5d53 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -24,6 +24,15 @@
  *
  ******************************************************************************/
 
+#include <linux/etherdevice.h>
+#include <linux/of_net.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_SPARC
+#include <asm/idprom.h>
+#include <asm/prom.h>
+#endif
+
 /* Local includes */
 #include "i40e.h"
 #include "i40e_diag.h"
@@ -9387,6 +9396,44 @@ static struct i40e_vsi *i40e_vsi_reinit_setup(struct i40e_vsi *vsi)
 }
 
 /**
+ * i40e_macaddr_init - explicitly write the mac address filters.
+ *
+ * @vsi: pointer to the vsi.
+ * @macaddr: the MAC address
+ *
+ * This is needed when the macaddr has been obtained by other
+ * means than the default, e.g., from Open Firmware or IDPROM.
+ * Returns 0 on success, negative on failure
+ **/
+static int i40e_macaddr_init(struct i40e_vsi *vsi, u8 *macaddr)
+{
+	int ret, aq_err;
+	struct i40e_aqc_add_macvlan_element_data element;
+
+	ret = i40e_aq_mac_address_write(&vsi->back->hw,
+					I40E_AQC_WRITE_TYPE_LAA_WOL,
+					macaddr, NULL);
+	if (ret) {
+		dev_info(&vsi->back->pdev->dev,
+			 "Addr change for VSI failed: %d\n", ret);
+		return -EADDRNOTAVAIL;
+	}
+
+	memset(&element, 0, sizeof(element));
+	ether_addr_copy(element.mac_addr, macaddr);
+	element.flags = cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH);
+	ret = i40e_aq_add_macvlan(&vsi->back->hw, vsi->seid, &element, 1, NULL);
+	aq_err = vsi->back->hw.aq.asq_last_status;
+	if (aq_err != I40E_AQ_RC_OK) {
+		dev_info(&vsi->back->pdev->dev,
+			 "add filter failed err %s aq_err %s\n",
+			 i40e_stat_str(&vsi->back->hw, ret),
+			 i40e_aq_str(&vsi->back->hw, aq_err));
+	}
+	return ret;
+}
+
+/**
  * i40e_vsi_setup - Set up a VSI by a given type
  * @pf: board private structure
  * @type: VSI type
@@ -9510,6 +9557,14 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type,
 	switch (vsi->type) {
 	/* setup the netdev if needed */
 	case I40E_VSI_MAIN:
+		/* Apply relevant filters if a platform-specific mac
+		 * address was selected.
+		 */
+		if (!pf->is_default_mac) {
+			ret = i40e_macaddr_init(vsi, pf->hw.mac.addr);
+			if (ret)
+				goto err_netdev;
+		}
 	case I40E_VSI_VMDQ2:
 	case I40E_VSI_FCOE:
 		ret = i40e_config_netdev(vsi);
@@ -10340,6 +10395,36 @@ static void i40e_print_features(struct i40e_pf *pf)
 }
 
 /**
+ * i40e_get_platform_mac_addr - get platform-specific MAC address
+ *
+ * @pdev: PCI device information struct
+ * @pf: board private structure
+ *
+ * Look up the MAC address in Open Firmware  on systems that support it,
+ * and use IDPROM on SPARC if no OF address is found. On return, the value
+ * of pf->is_default_mac will be set to 1, if the default mac address is
+ * to be used, or 0, if a platform-specific value has been selected.
+ *
+ **/
+static void i40e_get_platform_mac_addr(struct pci_dev *pdev, struct i40e_pf *pf)
+{
+	struct device_node *dp = pci_device_to_OF_node(pdev);
+	const unsigned char *addr;
+	u8 *mac_addr = pf->hw.mac.addr;
+
+	pf->is_default_mac = 1;
+	addr = of_get_mac_address(dp);
+	if (addr) {
+		ether_addr_copy(mac_addr, addr);
+		pf->is_default_mac = 0;
+	}
+#ifdef CONFIG_SPARC
+	ether_addr_copy(mac_addr, idprom->id_ethaddr);
+	pf->is_default_mac = 0;
+#endif /* CONFIG_SPARC */
+}
+
+/**
  * i40e_probe - Device initialization routine
  * @pdev: PCI device information struct
  * @ent: entry in i40e_pci_tbl
@@ -10543,6 +10628,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	i40e_get_mac_addr(hw, hw->mac.addr);
+	/* allow a platform config to override the HW addr */
+	i40e_get_platform_mac_addr(pdev, pf);
 	if (!is_valid_ether_addr(hw->mac.addr)) {
 		dev_info(&pdev->dev, "invalid MAC address %pM\n", hw->mac.addr);
 		err = -EIO;
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists