| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1449418063-8111-7-git-send-email-ogerlitz@mellanox.com>
Date: Sun, 6 Dec 2015 18:07:43 +0200
From: Or Gerlitz <ogerlitz@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Tal Alon <talal@...lanox.com>,
Majd Dibbiny <majd@...lanox.com>,
Jack Morgenstein <jackm@....mellanox.co.il>,
Moni Shoua <monis@...lanox.com>,
Or Gerlitz <ogerlitz@...lanox.com>
Subject: [PATCH net-next 6/6] net/mlx4_core: Support the HA mode for SRIOV VFs too
From: Moni Shoua <monis@...lanox.com>
When the mlx4 driver runs in HA mode, and all VFs are single ported
ones, we make their single port Highly-Available.
This is done by taking advantage of the HA mode properties (following
bonding changes with programming the port V2P map, etc) and adding
the missing parts which are unique to SRIOV such as mirroring VF
steering rules on both ports.
Due to limits on the MAC and VLAN table this mode is enabled only when
number of total VFs is under 64.
Signed-off-by: Moni Shoua <monis@...lanox.com>
Reviewed-by: Jack Morgenstein <jackm@....mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 107 +++++++++++++++++++++++++++---
1 file changed, 97 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 31c491e..f1b6d21 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1221,6 +1221,76 @@ err_set_port:
return err ? err : count;
}
+/* bond for multi-function device */
+#define MAX_MF_BOND_ALLOWED_SLAVES 63
+static int mlx4_mf_bond(struct mlx4_dev *dev)
+{
+ int err = 0;
+ struct mlx4_slaves_pport slaves_port1;
+ struct mlx4_slaves_pport slaves_port2;
+ DECLARE_BITMAP(slaves_port_1_2, MLX4_MFUNC_MAX);
+
+ slaves_port1 = mlx4_phys_to_slaves_pport(dev, 1);
+ slaves_port2 = mlx4_phys_to_slaves_pport(dev, 2);
+ bitmap_and(slaves_port_1_2,
+ slaves_port1.slaves, slaves_port2.slaves,
+ dev->persist->num_vfs + 1);
+
+ /* only single port vfs are allowed */
+ if (bitmap_weight(slaves_port_1_2, dev->persist->num_vfs + 1) > 1) {
+ mlx4_warn(dev, "HA mode unsupported for dual ported VFs\n");
+ return -EINVAL;
+ }
+
+ /* limit on maximum allowed VFs */
+ if ((bitmap_weight(slaves_port1.slaves, dev->persist->num_vfs + 1) +
+ bitmap_weight(slaves_port2.slaves, dev->persist->num_vfs + 1)) >
+ MAX_MF_BOND_ALLOWED_SLAVES)
+ return -EINVAL;
+
+ if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ mlx4_warn(dev, "HA mode unsupported for NON DMFS steering\n");
+ return -EINVAL;
+ }
+
+ err = mlx4_bond_mac_table(dev);
+ if (err)
+ return err;
+ err = mlx4_bond_vlan_table(dev);
+ if (err)
+ goto err1;
+ err = mlx4_bond_fs_rules(dev);
+ if (err)
+ goto err2;
+
+ return 0;
+err2:
+ (void)mlx4_unbond_vlan_table(dev);
+err1:
+ (void)mlx4_unbond_mac_table(dev);
+ return err;
+}
+
+static int mlx4_mf_unbond(struct mlx4_dev *dev)
+{
+ int ret, ret1;
+
+ ret = mlx4_unbond_fs_rules(dev);
+ if (ret)
+ mlx4_warn(dev, "multifunction unbond for flow rules failedi (%d)\n", ret);
+ ret1 = mlx4_unbond_mac_table(dev);
+ if (ret1) {
+ mlx4_warn(dev, "multifunction unbond for MAC table failed (%d)\n", ret1);
+ ret = ret1;
+ }
+ ret1 = mlx4_unbond_vlan_table(dev);
+ if (ret1) {
+ mlx4_warn(dev, "multifunction unbond for VLAN table failed (%d)\n", ret1);
+ ret = ret1;
+ }
+ return ret;
+}
+
int mlx4_bond(struct mlx4_dev *dev)
{
int ret = 0;
@@ -1228,16 +1298,23 @@ int mlx4_bond(struct mlx4_dev *dev)
mutex_lock(&priv->bond_mutex);
- if (!mlx4_is_bonded(dev))
+ if (!mlx4_is_bonded(dev)) {
ret = mlx4_do_bond(dev, true);
- else
- ret = 0;
+ if (ret)
+ mlx4_err(dev, "Failed to bond device: %d\n", ret);
+ if (!ret && mlx4_is_master(dev)) {
+ ret = mlx4_mf_bond(dev);
+ if (ret) {
+ mlx4_err(dev, "bond for multifunction failed\n");
+ mlx4_do_bond(dev, false);
+ }
+ }
+ }
mutex_unlock(&priv->bond_mutex);
- if (ret)
- mlx4_err(dev, "Failed to bond device: %d\n", ret);
- else
+ if (!ret)
mlx4_dbg(dev, "Device is bonded\n");
+
return ret;
}
EXPORT_SYMBOL_GPL(mlx4_bond);
@@ -1249,14 +1326,24 @@ int mlx4_unbond(struct mlx4_dev *dev)
mutex_lock(&priv->bond_mutex);
- if (mlx4_is_bonded(dev))
+ if (mlx4_is_bonded(dev)) {
+ int ret2 = 0;
+
ret = mlx4_do_bond(dev, false);
+ if (ret)
+ mlx4_err(dev, "Failed to unbond device: %d\n", ret);
+ if (mlx4_is_master(dev))
+ ret2 = mlx4_mf_unbond(dev);
+ if (ret2) {
+ mlx4_warn(dev, "Failed to unbond device for multifunction (%d)\n", ret2);
+ ret = ret2;
+ }
+ }
mutex_unlock(&priv->bond_mutex);
- if (ret)
- mlx4_err(dev, "Failed to unbond device: %d\n", ret);
- else
+ if (!ret)
mlx4_dbg(dev, "Device is unbonded\n");
+
return ret;
}
EXPORT_SYMBOL_GPL(mlx4_unbond);
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists