netdev - [PATCH v2] r8152: fix lockup when runtime PM is enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Tue,  8 Dec 2015 12:17:42 +0100
From:	Peter Wu <peter@...ensteyn.nl>
To:	Hayes Wang <hayeswang@...ltek.com>,
	"David S . Miller" <davem@...emloft.net>,
	linux-usb@...r.kernel.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc:	Lu Baolu <baolu.lu@...ux.intel.com>
Subject: [PATCH v2] r8152: fix lockup when runtime PM is enabled

When an interface is brought up which was previously suspended (via
runtime PM), it would hang. This happens because napi_disable is called
before napi_enable.

Solve this by avoiding napi_enable in the resume during open function
(netif_running is true when open is called, IFF_UP is set after a
successful open; netif_running is false when close is called, but IFF_UP
is then still set).

While at it, remove WORK_ENABLE check from rtl8152_open (introduced with
the original change) because it cannot happen:

 - After this patch, runtime resume will not set it during rtl8152_open.
 - When link is up, rtl8152_open is not called.
 - When link is down during system/auto suspend/resume, it is not set.

Fixes: 41cec84cf285 ("r8152: don't enable napi before rx ready")
Link: https://lkml.kernel.org/r/20151205105912.GA1766@al
Signed-off-by: Peter Wu <peter@...ensteyn.nl>
---
 v2: moved rtl_runtime_suspend_enable from close to rtl8152_suspend

Tested with the scenario from
https://lkml.kernel.org/r/20151208111008.GA18728@al
(added debug prints to verify the suspend/resume moments)
---
 drivers/net/usb/r8152.c | 21 +++------------------
 1 file changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index d9427ca..2e32c41 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3067,17 +3067,6 @@ static int rtl8152_open(struct net_device *netdev)
 
 	mutex_lock(&tp->control);
 
-	/* The WORK_ENABLE may be set when autoresume occurs */
-	if (test_bit(WORK_ENABLE, &tp->flags)) {
-		clear_bit(WORK_ENABLE, &tp->flags);
-		usb_kill_urb(tp->intr_urb);
-		cancel_delayed_work_sync(&tp->schedule);
-
-		/* disable the tx/rx, if the workqueue has enabled them. */
-		if (netif_carrier_ok(netdev))
-			tp->rtl_ops.disable(tp);
-	}
-
 	tp->rtl_ops.up(tp);
 
 	rtl8152_set_speed(tp, AUTONEG_ENABLE,
@@ -3124,12 +3113,6 @@ static int rtl8152_close(struct net_device *netdev)
 	} else {
 		mutex_lock(&tp->control);
 
-		/* The autosuspend may have been enabled and wouldn't
-		 * be disable when autoresume occurs, because the
-		 * netif_running() would be false.
-		 */
-		rtl_runtime_suspend_enable(tp, false);
-
 		tp->rtl_ops.down(tp);
 
 		mutex_unlock(&tp->control);
@@ -3512,7 +3495,7 @@ static int rtl8152_resume(struct usb_interface *intf)
 		netif_device_attach(tp->netdev);
 	}
 
-	if (netif_running(tp->netdev)) {
+	if (netif_running(tp->netdev) && tp->netdev->flags & IFF_UP) {
 		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
 			rtl_runtime_suspend_enable(tp, false);
 			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
@@ -3532,6 +3515,8 @@ static int rtl8152_resume(struct usb_interface *intf)
 		}
 		usb_submit_urb(tp->intr_urb, GFP_KERNEL);
 	} else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+		if (tp->netdev->flags & IFF_UP)
+			rtl_runtime_suspend_enable(tp, false);
 		clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 	}
 
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html